gecko/gfx/layers/d3d10/LayerManagerD3D10.cpp
Jeff Muizelaar e129abb21a Bug 632822. Hookup LayerManager ReportFailure to LogFailure. r=bas,a=ehsan
--HG--
extra : rebase_source : 1ed9c86005f4ce8c5088b4b5fca6976a0e41113d
2011-02-09 14:28:39 -05:00

597 lines
16 KiB
C++

/* -*- Mode: C++; tab-width: 20; indent-tabs-mode: nil; c-basic-offset: 4 -*-
* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is Mozilla Corporation code.
*
* The Initial Developer of the Original Code is Mozilla Foundation.
* Portions created by the Initial Developer are Copyright (C) 2009
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Bas Schouten <bschouten@mozilla.com>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include "LayerManagerD3D10.h"
#include "LayerManagerD3D10Effect.h"
#include "gfxWindowsPlatform.h"
#include "gfxD2DSurface.h"
#include "gfxFailure.h"
#include "cairo-win32.h"
#include "dxgi.h"
#include "ContainerLayerD3D10.h"
#include "ThebesLayerD3D10.h"
#include "ColorLayerD3D10.h"
#include "CanvasLayerD3D10.h"
#include "ImageLayerD3D10.h"
#include "../d3d9/Nv3DVUtils.h"
namespace mozilla {
namespace layers {
typedef HRESULT (WINAPI*D3D10CreateEffectFromMemoryFunc)(
void *pData,
SIZE_T DataLength,
UINT FXFlags,
ID3D10Device *pDevice,
ID3D10EffectPool *pEffectPool,
ID3D10Effect **ppEffect
);
struct Vertex
{
float position[2];
};
// {17F88CCB-1F49-4c08-8002-ADA7BD44856D}
static const GUID sEffect =
{ 0x17f88ccb, 0x1f49, 0x4c08, { 0x80, 0x2, 0xad, 0xa7, 0xbd, 0x44, 0x85, 0x6d } };
// {19599D91-912C-4C2F-A8C5-299DE85FBD34}
static const GUID sInputLayout =
{ 0x19599d91, 0x912c, 0x4c2f, { 0xa8, 0xc5, 0x29, 0x9d, 0xe8, 0x5f, 0xbd, 0x34 } };
// {293157D2-09C7-4680-AE27-C28E370E418B}
static const GUID sVertexBuffer =
{ 0x293157d2, 0x9c7, 0x4680, { 0xae, 0x27, 0xc2, 0x8e, 0x37, 0xe, 0x41, 0x8b } };
cairo_user_data_key_t gKeyD3D10Texture;
LayerManagerD3D10::LayerManagerD3D10(nsIWidget *aWidget)
: mWidget(aWidget)
{
}
LayerManagerD3D10::~LayerManagerD3D10()
{
Destroy();
}
static bool
IsOptimus()
{
return GetModuleHandleA("nvumdshim.dll");
}
bool
LayerManagerD3D10::Initialize()
{
HRESULT hr;
/* Create an Nv3DVUtils instance */
if (!mNv3DVUtils) {
mNv3DVUtils = new Nv3DVUtils();
if (!mNv3DVUtils) {
NS_WARNING("Could not create a new instance of Nv3DVUtils.\n");
}
}
/* Initialize the Nv3DVUtils object */
if (mNv3DVUtils) {
mNv3DVUtils->Initialize();
}
mDevice = gfxWindowsPlatform::GetPlatform()->GetD3D10Device();
if (!mDevice) {
return false;
}
/*
* Do some post device creation setup
*/
if (mNv3DVUtils) {
IUnknown* devUnknown = NULL;
if (mDevice) {
mDevice->QueryInterface(IID_IUnknown, (void **)&devUnknown);
}
mNv3DVUtils->SetDeviceInfo(devUnknown);
}
UINT size = sizeof(ID3D10Effect*);
if (FAILED(mDevice->GetPrivateData(sEffect, &size, mEffect.StartAssignment()))) {
D3D10CreateEffectFromMemoryFunc createEffect = (D3D10CreateEffectFromMemoryFunc)
GetProcAddress(LoadLibraryA("d3d10_1.dll"), "D3D10CreateEffectFromMemory");
if (!createEffect) {
return false;
}
hr = createEffect((void*)g_main,
sizeof(g_main),
D3D10_EFFECT_SINGLE_THREADED,
mDevice,
NULL,
getter_AddRefs(mEffect));
if (FAILED(hr)) {
return false;
}
mDevice->SetPrivateDataInterface(sEffect, mEffect);
}
size = sizeof(ID3D10InputLayout*);
if (FAILED(mDevice->GetPrivateData(sInputLayout, &size, mInputLayout.StartAssignment()))) {
D3D10_INPUT_ELEMENT_DESC layout[] =
{
{ "POSITION", 0, DXGI_FORMAT_R32G32_FLOAT, 0, 0, D3D10_INPUT_PER_VERTEX_DATA, 0 },
};
D3D10_PASS_DESC passDesc;
mEffect->GetTechniqueByName("RenderRGBLayerPremul")->GetPassByIndex(0)->
GetDesc(&passDesc);
hr = mDevice->CreateInputLayout(layout,
sizeof(layout) / sizeof(D3D10_INPUT_ELEMENT_DESC),
passDesc.pIAInputSignature,
passDesc.IAInputSignatureSize,
getter_AddRefs(mInputLayout));
if (FAILED(hr)) {
return false;
}
mDevice->SetPrivateDataInterface(sInputLayout, mInputLayout);
}
size = sizeof(ID3D10Buffer*);
if (FAILED(mDevice->GetPrivateData(sVertexBuffer, &size, mVertexBuffer.StartAssignment()))) {
Vertex vertices[] = { {0.0, 0.0}, {1.0, 0.0}, {0.0, 1.0}, {1.0, 1.0} };
CD3D10_BUFFER_DESC bufferDesc(sizeof(vertices), D3D10_BIND_VERTEX_BUFFER);
D3D10_SUBRESOURCE_DATA data;
data.pSysMem = (void*)vertices;
hr = mDevice->CreateBuffer(&bufferDesc, &data, getter_AddRefs(mVertexBuffer));
if (FAILED(hr)) {
return false;
}
mDevice->SetPrivateDataInterface(sVertexBuffer, mVertexBuffer);
}
nsRefPtr<IDXGIDevice> dxgiDevice;
nsRefPtr<IDXGIAdapter> dxgiAdapter;
nsRefPtr<IDXGIFactory> dxgiFactory;
mDevice->QueryInterface(dxgiDevice.StartAssignment());
dxgiDevice->GetAdapter(getter_AddRefs(dxgiAdapter));
dxgiAdapter->GetParent(IID_PPV_ARGS(dxgiFactory.StartAssignment()));
DXGI_SWAP_CHAIN_DESC swapDesc;
::ZeroMemory(&swapDesc, sizeof(swapDesc));
swapDesc.BufferDesc.Width = 0;
swapDesc.BufferDesc.Height = 0;
swapDesc.BufferDesc.Format = DXGI_FORMAT_B8G8R8A8_UNORM;
swapDesc.BufferDesc.RefreshRate.Numerator = 60;
swapDesc.BufferDesc.RefreshRate.Denominator = 1;
swapDesc.SampleDesc.Count = 1;
swapDesc.SampleDesc.Quality = 0;
swapDesc.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT;
swapDesc.BufferCount = 1;
// We don't really need this flag, however it seems on some NVidia hardware
// smaller area windows do not present properly without this flag. This flag
// should have no negative consequences by itself. See bug 613790. This flag
// is broken on optimus devices. As a temporary solution we don't set it
// there, the only way of reliably detecting we're on optimus is looking for
// the DLL. See Bug 623807.
if (IsOptimus()) {
swapDesc.Flags = 0;
} else {
swapDesc.Flags = DXGI_SWAP_CHAIN_FLAG_GDI_COMPATIBLE;
}
swapDesc.OutputWindow = (HWND)mWidget->GetNativeData(NS_NATIVE_WINDOW);
swapDesc.Windowed = TRUE;
/**
* Create a swap chain, this swap chain will contain the backbuffer for
* the window we draw to. The front buffer is the full screen front
* buffer.
*/
hr = dxgiFactory->CreateSwapChain(dxgiDevice, &swapDesc, getter_AddRefs(mSwapChain));
if (FAILED(hr)) {
return false;
}
// We need this because we don't want DXGI to respond to Alt+Enter.
dxgiFactory->MakeWindowAssociation(swapDesc.OutputWindow, DXGI_MWA_NO_WINDOW_CHANGES);
return true;
}
void
LayerManagerD3D10::Destroy()
{
if (!IsDestroyed()) {
if (mRoot) {
static_cast<LayerD3D10*>(mRoot->ImplData())->LayerManagerDestroyed();
}
}
LayerManager::Destroy();
}
void
LayerManagerD3D10::SetRoot(Layer *aRoot)
{
mRoot = aRoot;
}
void
LayerManagerD3D10::BeginTransaction()
{
}
void
LayerManagerD3D10::BeginTransactionWithTarget(gfxContext* aTarget)
{
mTarget = aTarget;
}
bool
LayerManagerD3D10::EndEmptyTransaction()
{
if (!mRoot)
return false;
EndTransaction(nsnull, nsnull);
return true;
}
void
LayerManagerD3D10::EndTransaction(DrawThebesLayerCallback aCallback,
void* aCallbackData)
{
mCurrentCallbackInfo.Callback = aCallback;
mCurrentCallbackInfo.CallbackData = aCallbackData;
// The results of our drawing always go directly into a pixel buffer,
// so we don't need to pass any global transform here.
mRoot->ComputeEffectiveTransforms(gfx3DMatrix());
Render();
mCurrentCallbackInfo.Callback = nsnull;
mCurrentCallbackInfo.CallbackData = nsnull;
mTarget = nsnull;
}
already_AddRefed<ThebesLayer>
LayerManagerD3D10::CreateThebesLayer()
{
nsRefPtr<ThebesLayer> layer = new ThebesLayerD3D10(this);
return layer.forget();
}
already_AddRefed<ContainerLayer>
LayerManagerD3D10::CreateContainerLayer()
{
nsRefPtr<ContainerLayer> layer = new ContainerLayerD3D10(this);
return layer.forget();
}
already_AddRefed<ImageLayer>
LayerManagerD3D10::CreateImageLayer()
{
nsRefPtr<ImageLayer> layer = new ImageLayerD3D10(this);
return layer.forget();
}
already_AddRefed<ColorLayer>
LayerManagerD3D10::CreateColorLayer()
{
nsRefPtr<ColorLayer> layer = new ColorLayerD3D10(this);
return layer.forget();
}
already_AddRefed<CanvasLayer>
LayerManagerD3D10::CreateCanvasLayer()
{
nsRefPtr<CanvasLayer> layer = new CanvasLayerD3D10(this);
return layer.forget();
}
already_AddRefed<ImageContainer>
LayerManagerD3D10::CreateImageContainer()
{
nsRefPtr<ImageContainer> layer = new ImageContainerD3D10(mDevice);
return layer.forget();
}
static void ReleaseTexture(void *texture)
{
static_cast<ID3D10Texture2D*>(texture)->Release();
}
already_AddRefed<gfxASurface>
LayerManagerD3D10::CreateOptimalSurface(const gfxIntSize &aSize,
gfxASurface::gfxImageFormat aFormat)
{
if ((aFormat != gfxASurface::ImageFormatRGB24 &&
aFormat != gfxASurface::ImageFormatARGB32)) {
return LayerManager::CreateOptimalSurface(aSize, aFormat);
}
nsRefPtr<ID3D10Texture2D> texture;
CD3D10_TEXTURE2D_DESC desc(DXGI_FORMAT_B8G8R8A8_UNORM, aSize.width, aSize.height, 1, 1);
desc.BindFlags = D3D10_BIND_RENDER_TARGET | D3D10_BIND_SHADER_RESOURCE;
desc.MiscFlags = D3D10_RESOURCE_MISC_GDI_COMPATIBLE;
HRESULT hr = device()->CreateTexture2D(&desc, NULL, getter_AddRefs(texture));
if (FAILED(hr)) {
NS_WARNING("Failed to create new texture for CreateOptimalSurface!");
return LayerManager::CreateOptimalSurface(aSize, aFormat);
}
nsRefPtr<gfxD2DSurface> surface =
new gfxD2DSurface(texture, aFormat == gfxASurface::ImageFormatRGB24 ?
gfxASurface::CONTENT_COLOR : gfxASurface::CONTENT_COLOR_ALPHA);
if (!surface || surface->CairoStatus()) {
return LayerManager::CreateOptimalSurface(aSize, aFormat);
}
surface->SetData(&gKeyD3D10Texture,
texture.forget().get(),
ReleaseTexture);
return surface.forget();
}
void
LayerManagerD3D10::SetViewport(const nsIntSize &aViewport)
{
mViewport = aViewport;
D3D10_VIEWPORT viewport;
viewport.MaxDepth = 1.0f;
viewport.MinDepth = 0;
viewport.Width = aViewport.width;
viewport.Height = aViewport.height;
viewport.TopLeftX = 0;
viewport.TopLeftY = 0;
mDevice->RSSetViewports(1, &viewport);
gfx3DMatrix projection;
/*
* Matrix to transform to viewport space ( <-1.0, 1.0> topleft,
* <1.0, -1.0> bottomright)
*/
projection._11 = 2.0f / aViewport.width;
projection._22 = -2.0f / aViewport.height;
projection._33 = 1.0f;
projection._41 = -1.0f;
projection._42 = 1.0f;
projection._44 = 1.0f;
HRESULT hr = mEffect->GetVariableByName("mProjection")->
SetRawValue(&projection._11, 0, 64);
if (FAILED(hr)) {
NS_WARNING("Failed to set projection matrix.");
}
}
void
LayerManagerD3D10::SetupPipeline()
{
VerifyBufferSize();
UpdateRenderTarget();
nsIntRect rect;
mWidget->GetClientBounds(rect);
HRESULT hr;
hr = mEffect->GetVariableByName("vTextureCoords")->AsVector()->
SetFloatVector(ShaderConstantRectD3D10(0, 0, 1.0f, 1.0f));
if (FAILED(hr)) {
NS_WARNING("Failed to set Texture Coordinates.");
return;
}
ID3D10RenderTargetView *view = mRTView;
mDevice->OMSetRenderTargets(1, &view, NULL);
mDevice->IASetInputLayout(mInputLayout);
UINT stride = sizeof(Vertex);
UINT offset = 0;
ID3D10Buffer *buffer = mVertexBuffer;
mDevice->IASetVertexBuffers(0, 1, &buffer, &stride, &offset);
mDevice->IASetPrimitiveTopology(D3D10_PRIMITIVE_TOPOLOGY_TRIANGLESTRIP);
SetViewport(nsIntSize(rect.width, rect.height));
}
void
LayerManagerD3D10::UpdateRenderTarget()
{
if (mRTView) {
return;
}
HRESULT hr;
nsRefPtr<ID3D10Texture2D> backBuf;
hr = mSwapChain->GetBuffer(0, __uuidof(ID3D10Texture2D), (void**)backBuf.StartAssignment());
if (FAILED(hr)) {
return;
}
mDevice->CreateRenderTargetView(backBuf, NULL, getter_AddRefs(mRTView));
}
void
LayerManagerD3D10::VerifyBufferSize()
{
DXGI_SWAP_CHAIN_DESC swapDesc;
mSwapChain->GetDesc(&swapDesc);
nsIntRect rect;
mWidget->GetClientBounds(rect);
if (swapDesc.BufferDesc.Width == rect.width &&
swapDesc.BufferDesc.Height == rect.height) {
return;
}
mRTView = nsnull;
if (IsOptimus()) {
mSwapChain->ResizeBuffers(1, rect.width, rect.height,
DXGI_FORMAT_B8G8R8A8_UNORM,
0);
} else {
mSwapChain->ResizeBuffers(1, rect.width, rect.height,
DXGI_FORMAT_B8G8R8A8_UNORM,
DXGI_SWAP_CHAIN_FLAG_GDI_COMPATIBLE);
}
}
void
LayerManagerD3D10::Render()
{
if (mRoot) {
static_cast<LayerD3D10*>(mRoot->ImplData())->Validate();
}
SetupPipeline();
float black[] = { 0, 0, 0, 0 };
device()->ClearRenderTargetView(mRTView, black);
nsIntRect rect;
mWidget->GetClientBounds(rect);
if (mRoot) {
const nsIntRect *clipRect = mRoot->GetClipRect();
D3D10_RECT r;
if (clipRect) {
r.left = (LONG)clipRect->x;
r.top = (LONG)clipRect->y;
r.right = (LONG)(clipRect->x + clipRect->width);
r.bottom = (LONG)(clipRect->y + clipRect->height);
} else {
r.left = r.top = 0;
r.right = rect.width;
r.bottom = rect.height;
}
device()->RSSetScissorRects(1, &r);
static_cast<LayerD3D10*>(mRoot->ImplData())->RenderLayer();
}
if (mTarget) {
PaintToTarget();
} else {
mSwapChain->Present(0, 0);
}
}
void
LayerManagerD3D10::PaintToTarget()
{
nsRefPtr<ID3D10Texture2D> backBuf;
mSwapChain->GetBuffer(0, __uuidof(ID3D10Texture2D), (void**)backBuf.StartAssignment());
D3D10_TEXTURE2D_DESC bbDesc;
backBuf->GetDesc(&bbDesc);
CD3D10_TEXTURE2D_DESC softDesc(bbDesc.Format, bbDesc.Width, bbDesc.Height);
softDesc.MipLevels = 1;
softDesc.CPUAccessFlags = D3D10_CPU_ACCESS_READ;
softDesc.Usage = D3D10_USAGE_STAGING;
softDesc.BindFlags = 0;
nsRefPtr<ID3D10Texture2D> readTexture;
device()->CreateTexture2D(&softDesc, NULL, getter_AddRefs(readTexture));
device()->CopyResource(readTexture, backBuf);
D3D10_MAPPED_TEXTURE2D map;
readTexture->Map(0, D3D10_MAP_READ, 0, &map);
nsRefPtr<gfxImageSurface> tmpSurface =
new gfxImageSurface((unsigned char*)map.pData,
gfxIntSize(bbDesc.Width, bbDesc.Height),
map.RowPitch,
gfxASurface::ImageFormatARGB32);
mTarget->SetSource(tmpSurface);
mTarget->SetOperator(gfxContext::OPERATOR_OVER);
mTarget->Paint();
readTexture->Unmap(0);
}
void
LayerManagerD3D10::ReportFailure(const nsACString &aMsg, HRESULT aCode)
{
// We could choose to abort here when hr == E_OUTOFMEMORY.
nsCString msg;
msg.Append(aMsg);
msg.AppendLiteral(" Error code: ");
msg.AppendInt(PRUint32(aCode));
NS_WARNING(msg.BeginReading());
gfx::LogFailure(msg);
}
LayerD3D10::LayerD3D10(LayerManagerD3D10 *aManager)
: mD3DManager(aManager)
{
}
}
}