gecko/gfx/layers/opengl/LayerManagerOGLProgram.h

/* -*- Mode: C++; tab-width: 20; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is Mozilla Corporation code.
 *
 * The Initial Developer of the Original Code is Mozilla Foundation.
 * Portions created by the Initial Developer are Copyright (C) 2010
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *   Vladimir Vukicevic <vladimir@pobox.com>
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

#ifndef GFX_LAYERMANAGEROGLPROGRAM_H
#define GFX_LAYERMANAGEROGLPROGRAM_H

#include <string.h>

#include "prenv.h"

#include "nsString.h"
#include "GLContext.h"

namespace mozilla {
namespace layers {

#if defined(DEBUG)
#define CHECK_CURRENT_PROGRAM 1
#define ASSERT_THIS_PROGRAM                                             \
  do {                                                                  \
    NS_ASSERTION(mGL->GetUserData(&sCurrentProgramKey) == this, \
                 "SetUniform with wrong program active!");              \
  } while (0)
#else
#define ASSERT_THIS_PROGRAM
#endif

class LayerManagerOGLProgram {
protected:
#ifdef CHECK_CURRENT_PROGRAM
  static int sCurrentProgramKey;
#endif

public:
  typedef mozilla::gl::GLContext GLContext;

  // common attrib locations
  enum {
    VertexAttrib = 0,
    TexCoordAttrib = 1
  };

  LayerManagerOGLProgram(GLContext *aGL)
    : mGL(aGL), mProgram(0)
  { }

  virtual ~LayerManagerOGLProgram() {
    nsRefPtr<GLContext> ctx = mGL->GetSharedContext();
    if (!ctx) {
      ctx = mGL;
    }
    ctx->MakeCurrent();
    ctx->fDeleteProgram(mProgram);
  }

  void Activate() {
    NS_ASSERTION(mProgram != 0, "Attempting to activate a program that's not in use!");
    mGL->fUseProgram(mProgram);
#if CHECK_CURRENT_PROGRAM
    mGL->SetUserData(&sCurrentProgramKey, this);
#endif
  }

  void SetUniform(GLuint aUniform, float aFloatValue) {
    ASSERT_THIS_PROGRAM;
    if (aUniform == GLuint(-1))
      return;
    mGL->fUniform1f(aUniform, aFloatValue);
  }

  void SetUniform(GLuint aUniform, const gfxRGBA& aColor) {
    ASSERT_THIS_PROGRAM;
    if (aUniform == GLuint(-1))
      return;
    mGL->fUniform4f(aUniform, float(aColor.r), float(aColor.g), float(aColor.b), float(aColor.a));
  }

  void SetUniform(GLuint aUniform, int aLength, float *aFloatValues) {
    ASSERT_THIS_PROGRAM;

    if (aUniform == GLuint(-1))
      return;

    if (aLength == 1) {
      mGL->fUniform1fv(aUniform, 1, aFloatValues);
    } else if (aLength == 2) {
      mGL->fUniform2fv(aUniform, 1, aFloatValues);
    } else if (aLength == 3) {
      mGL->fUniform3fv(aUniform, 1, aFloatValues);
    } else if (aLength == 4) {
      mGL->fUniform4fv(aUniform, 1, aFloatValues);
    } else {
      NS_NOTREACHED("Bogus aLength param");
    }
  }

  void SetUniform(GLuint aUniform, GLint aIntValue) {
    ASSERT_THIS_PROGRAM;
    if (aUniform == GLuint(-1))
      return;
    mGL->fUniform1i(aUniform, aIntValue);
  }

  void SetMatrixUniform(GLuint aUniform, const float *aFloatValues) {
    ASSERT_THIS_PROGRAM;
    if (aUniform == GLuint(-1))
      return;
    mGL->fUniformMatrix4fv(aUniform, 1, false, aFloatValues);
  }

protected:
  nsRefPtr<GLContext> mGL;

  GLuint mProgram;

  GLint CreateShader(GLenum aShaderType,
                     const char *aShaderSource)
  {
    GLint success, len = 0;

    GLint sh = mGL->fCreateShader(aShaderType);
    mGL->fShaderSource(sh, 1, (const GLchar**)&aShaderSource, NULL);
    mGL->fCompileShader(sh);
    mGL->fGetShaderiv(sh, LOCAL_GL_COMPILE_STATUS, &success);
    mGL->fGetShaderiv(sh, LOCAL_GL_INFO_LOG_LENGTH, (GLint*) &len);
    /* Even if compiling is successful, there may still be warnings.  Print them
     * in a debug build.  The > 10 is to catch silly compilers that might put
     * some whitespace in the log but otherwise leave it empty.
     */
    if (!success
#ifdef DEBUG
        || (len > 10 && PR_GetEnv("MOZ_DEBUG_SHADERS"))
#endif
        )
    {
      nsCAutoString log;
      log.SetCapacity(len);
      mGL->fGetShaderInfoLog(sh, len, (GLint*) &len, (char*) log.BeginWriting());
      log.SetLength(len);

      if (!success) {
        printf_stderr("=== SHADER COMPILATION FAILED ===\n");
      } else {
        printf_stderr("=== SHADER COMPILATION WARNINGS ===\n");
      }

        printf_stderr("=== Source:\n%s\n", aShaderSource);
        printf_stderr("=== Log:\n%s\n", log.get());
        printf_stderr("============\n");

      if (!success) {
        mGL->fDeleteShader(sh);
        return 0;
      }
    }

    return sh;
  }

  bool CreateProgram(const char *aVertexShaderString,
                     const char *aFragmentShaderString)
  {
    GLuint vertexShader = CreateShader(LOCAL_GL_VERTEX_SHADER, aVertexShaderString);
    GLuint fragmentShader = CreateShader(LOCAL_GL_FRAGMENT_SHADER, aFragmentShaderString);

    if (!vertexShader || !fragmentShader)
      return false;

    mProgram = mGL->fCreateProgram();
    mGL->fAttachShader(mProgram, vertexShader);
    mGL->fAttachShader(mProgram, fragmentShader);

    // bind common attribs to consistent indices
    mGL->fBindAttribLocation(mProgram, VertexAttrib, "aVertexCoord");
    mGL->fBindAttribLocation(mProgram, TexCoordAttrib, "aTexCoord");

    mGL->fLinkProgram(mProgram);

    GLint success, len;
    mGL->fGetProgramiv(mProgram, LOCAL_GL_LINK_STATUS, &success);
    mGL->fGetProgramiv(mProgram, LOCAL_GL_INFO_LOG_LENGTH, (GLint*) &len);
    /* Even if linking is successful, there may still be warnings.  Print them
     * in a debug build.  The > 10 is to catch silly compilers that might put
     * some whitespace in the log but otherwise leave it empty.
     */
    if (!success
#ifdef DEBUG
        || (len > 10 && PR_GetEnv("MOZ_DEBUG_SHADERS"))
#endif
        )
    {
      nsCAutoString log;
      log.SetCapacity(len);
      mGL->fGetProgramInfoLog(mProgram, len, (GLint*) &len, (char*) log.BeginWriting());
      log.SetLength(len);

      if (!success) {
        printf_stderr("=== PROGRAM LINKING FAILED ===\n");
      } else {
        printf_stderr("=== PROGRAM LINKING WARNINGS ===\n");
      }
      printf_stderr("=== Log:\n%s\n", log.get());
      printf_stderr("============\n");
    }

    // We can mark the shaders for deletion; they're attached to the program
    // and will remain attached.
    mGL->fDeleteShader(vertexShader);
    mGL->fDeleteShader(fragmentShader);

    if (!success) {
      mGL->fDeleteProgram(mProgram);
      mProgram = 0;
      return false;
    }

    return true;
  }

  void GetAttribLocations(const char **aAttribNames,
                          GLint *aAttribLocations)
  {
    NS_ASSERTION(mProgram != 0, "GetAttribLocations called with no program!");

    for (int i = 0; aAttribNames[i] != nsnull; ++i) {
      aAttribLocations[i] = mGL->fGetAttribLocation(mProgram, aAttribNames[i]);
    }
  }

  void GetUniformLocations(const char **aUniformNames,
                           GLint *aUniformLocations)
  {
    NS_ASSERTION(mProgram != 0, "GetUniformLocations called with no program!");

    for (int i = 0; aUniformNames[i] != nsnull; ++i) {
      aUniformLocations[i] = mGL->fGetUniformLocation(mProgram, aUniformNames[i]);
    }
  }
};

/*
 * A LayerProgram is the base of all further LayerPrograms.
 *
 * It has a number of attributes and uniforms common to all layer programs.
 *
 * Attribute inputs:
 *   aVertexCoord  - vertex coordinate
 *
 * Uniforms:
 *   uLayerTransform     - a transform matrix
 *   uLayerQuadTransform
 *   uMatrixProj         - projection matrix
 *   uRenderTargetOffset - a vec4 offset to apply to the transformed coordinates
 *   uLayerOpacity       - a float, the layer opacity (final colors will be multiplied by this)
 */

class LayerProgram  :
  public LayerManagerOGLProgram
{
public:
  enum {
    TransformMatrixUniform = 0,
    QuadTransformUniform,
    ProjectionMatrixUniform,
    OffsetUniform,
    LayerOpacityUniform,
    NumLayerUniforms
  };

  enum {
    VertexCoordAttrib = 0,
    NumLayerAttribs
  };

  LayerProgram(GLContext *aGL)
    : LayerManagerOGLProgram(aGL)
  { }

  bool Initialize(const char *aVertexShaderString,
                  const char *aFragmentShaderString)
  {
    if (!CreateProgram(aVertexShaderString, aFragmentShaderString))
      return false;

    const char *uniformNames[] = {
      "uLayerTransform",
      "uLayerQuadTransform",
      "uMatrixProj",
      "uRenderTargetOffset",
      "uLayerOpacity",
      NULL
    };

    mUniformLocations.SetLength(NumLayerUniforms);
    GetUniformLocations(uniformNames, &mUniformLocations[0]);

    const char *attribNames[] = {
      "aVertexCoord",
      NULL
    };

    mAttribLocations.SetLength(NumLayerAttribs);
    GetAttribLocations(attribNames, &mAttribLocations[0]);

    return true;
  }

  GLint AttribLocation(int aWhich) {
    if (aWhich < 0 || aWhich >= int(mAttribLocations.Length()))
      return -1;
    return mAttribLocations[aWhich];
  }

  void SetLayerTransform(const gfx3DMatrix& aMatrix) {
    SetLayerTransform(&aMatrix._11);
  }

  void SetLayerTransform(const float *aMatrix) {
    SetMatrixUniform(mUniformLocations[TransformMatrixUniform], aMatrix);
  }

  void SetLayerQuadRect(const nsIntRect& aRect) {
    gfx3DMatrix m;
    m._11 = float(aRect.width);
    m._22 = float(aRect.height);
    m._41 = float(aRect.x);
    m._42 = float(aRect.y);
    SetMatrixUniform(mUniformLocations[QuadTransformUniform], &m._11);
  }

  void SetProjectionMatrix(const gfx3DMatrix& aMatrix) {
    SetProjectionMatrix(&aMatrix._11);
  }

  void SetProjectionMatrix(const float *aMatrix) {
    SetMatrixUniform(mUniformLocations[ProjectionMatrixUniform], aMatrix);
  }

  void SetRenderOffset(const nsIntPoint& aOffset) {
    float vals[4] = { float(aOffset.x), float(aOffset.y), 0.0f, 0.0f };
    SetUniform(mUniformLocations[OffsetUniform], 4, vals);
  }

  void SetRenderOffset(float aX, float aY) {
    float vals[4] = { aX, aY, 0.0f, 0.0f };
    SetUniform(mUniformLocations[OffsetUniform], 4, vals);
  }

  void SetLayerOpacity(float aOpacity) {
    SetUniform(mUniformLocations[LayerOpacityUniform], aOpacity);
  }

protected:
  nsTArray<GLint> mUniformLocations;
  nsTArray<GLint> mAttribLocations;
};

/*
 * A ColorTextureLayerProgram is a LayerProgram that renders
 * a single texture.  It adds the following attributes and uniforms:
 *
 * Attribute inputs:
 *   aTexCoord     - texture coordinate
 *
 * Uniforms:
 *   uTexture         - 2D texture unit which to sample
 */

class ColorTextureLayerProgram :
  public LayerProgram
{
public:
  enum {
    TextureUniform = NumLayerUniforms,
    NumUniforms
  };

  enum {
    TexCoordAttrib = NumLayerAttribs,
    NumAttribs
  };

  ColorTextureLayerProgram(GLContext *aGL)
    : LayerProgram(aGL)
  { }

  bool Initialize(const char *aVertexShaderString,
                  const char *aFragmentShaderString)
  {
    if (!LayerProgram::Initialize(aVertexShaderString, aFragmentShaderString))
      return false;

    const char *uniformNames[] = {
      "uTexture",
      NULL
    };

    mUniformLocations.SetLength(NumUniforms);
    GetUniformLocations(uniformNames, &mUniformLocations[NumLayerUniforms]);

    const char *attribNames[] = {
      "aTexCoord",
      NULL
    };

    mAttribLocations.SetLength(NumAttribs);
    GetAttribLocations(attribNames, &mAttribLocations[NumLayerAttribs]);

    // this is a one-off that's present in the 2DRect versions of some shaders.
    mTexCoordMultiplierUniformLocation =
      mGL->fGetUniformLocation(mProgram, "uTexCoordMultiplier");

    return true;
  }

  void SetTextureUnit(GLint aUnit) {
    SetUniform(mUniformLocations[TextureUniform], aUnit);
  }

  GLint GetTexCoordMultiplierUniformLocation() {
    return mTexCoordMultiplierUniformLocation;
  }

protected:
  GLint mTexCoordMultiplierUniformLocation;
};

/*
 * A YCbCrTextureLayerProgram is a LayerProgram that renders a YCbCr
 * image, reading from three texture units.  The textures are assumed
 * to be single-channel textures.
 *
 * Attribute inputs:
 *   aTexCoord     - texture coordinate
 *
 * Uniforms:
 *   uYTexture     - 2D texture unit which to sample Y
 *   uCbTexture    - 2D texture unit which to sample Cb
 *   uCrTexture    - 2D texture unit which to sample Cr
 */

class YCbCrTextureLayerProgram :
  public LayerProgram
{
public:
  enum {
    YTextureUniform = NumLayerUniforms,
    CbTextureUniform,
    CrTextureUniform,
    NumUniforms
  };

  enum {
    TexCoordAttrib = NumLayerAttribs,
    NumAttribs
  };

  YCbCrTextureLayerProgram(GLContext *aGL)
    : LayerProgram(aGL)
  { }

  bool Initialize(const char *aVertexShaderString,
                  const char *aFragmentShaderString)
  {
    if (!LayerProgram::Initialize(aVertexShaderString, aFragmentShaderString))
      return false;

    const char *uniformNames[] = {
      "uYTexture",
      "uCbTexture",
      "uCrTexture",
      NULL
    };

    mUniformLocations.SetLength(NumUniforms);
    GetUniformLocations(uniformNames, &mUniformLocations[NumLayerUniforms]);

    const char *attribNames[] = {
      "aTexCoord",
      NULL
    };

    mAttribLocations.SetLength(NumAttribs);
    GetAttribLocations(attribNames, &mAttribLocations[NumLayerAttribs]);

    return true;
  }

  void SetYTextureUnit(GLint aUnit) {
    SetUniform(mUniformLocations[YTextureUniform], aUnit);
  }

  void SetCbTextureUnit(GLint aUnit) {
    SetUniform(mUniformLocations[CbTextureUniform], aUnit);
  }

  void SetCrTextureUnit(GLint aUnit) {
    SetUniform(mUniformLocations[CrTextureUniform], aUnit);
  }

  void SetYCbCrTextureUnits(GLint aYUnit, GLint aCbUnit, GLint aCrUnit) {
    SetUniform(mUniformLocations[YTextureUniform], aYUnit);
    SetUniform(mUniformLocations[CbTextureUniform], aCbUnit);
    SetUniform(mUniformLocations[CrTextureUniform], aCrUnit);
  }
};

/*
 * A ComponentAlphaTextureLayerProgram is a LayerProgram that renders one pass
 * of the two-pass component alpha rendering system using two textures.
 * It adds the following attributes and uniforms:
 *
 * Attribute inputs:
 *   aTexCoord     - texture coordinate
 *
 * Uniforms:
 *   uBlackTexture    - 2D texture on top of an opaque black background
 *   uWhiteTexture    - 2D texture on top of an opaque white background
 */

class ComponentAlphaTextureLayerProgram :
  public LayerProgram
{
public:
  enum {
    BlackTextureUniform = NumLayerUniforms,
    WhiteTextureUniform,
    NumUniforms
  };

  enum {
    TexCoordAttrib = NumLayerAttribs,
    NumAttribs
  };

  ComponentAlphaTextureLayerProgram(GLContext *aGL)
    : LayerProgram(aGL)
  { }

  bool Initialize(const char *aVertexShaderString,
                  const char *aFragmentShaderString)
  {
    if (!LayerProgram::Initialize(aVertexShaderString, aFragmentShaderString))
      return false;

    const char *uniformNames[] = {
      "uBlackTexture",
      "uWhiteTexture",
      NULL
    };

    mUniformLocations.SetLength(NumUniforms);
    GetUniformLocations(uniformNames, &mUniformLocations[NumLayerUniforms]);

    const char *attribNames[] = {
      "aTexCoord",
      NULL
    };

    mAttribLocations.SetLength(NumAttribs);
    GetAttribLocations(attribNames, &mAttribLocations[NumLayerAttribs]);

    return true;
  }

  void SetBlackTextureUnit(GLint aUnit) {
    SetUniform(mUniformLocations[BlackTextureUniform], aUnit);
  }

  void SetWhiteTextureUnit(GLint aUnit) {
    SetUniform(mUniformLocations[WhiteTextureUniform], aUnit);
  }
};

/*
 * A SolidColorLayerProgram is a LayerProgram that renders
 * a solid color.  It adds the following attributes and uniforms:
 *
 * Uniforms:
 *   uRenderColor      - solid color to render;
 *      This should be with premultiplied opacity, as it's written
 *      to the color buffer directly.  Layer Opacity is ignored.
 */

class SolidColorLayerProgram :
  public LayerProgram
{
public:
  enum {
    RenderColorUniform = NumLayerUniforms,
    NumUniforms
  };

  enum {
    NumAttribs = NumLayerAttribs
  };

  SolidColorLayerProgram(GLContext *aGL)
    : LayerProgram(aGL)
  { }

  bool Initialize(const char *aVertexShaderString,
                  const char *aFragmentShaderString)
  {
    if (!LayerProgram::Initialize(aVertexShaderString, aFragmentShaderString))
      return false;

    const char *uniformNames[] = {
      "uRenderColor",
      NULL
    };

    mUniformLocations.SetLength(NumUniforms);
    GetUniformLocations(uniformNames, &mUniformLocations[NumLayerUniforms]);

    return true;
  }

  void SetRenderColor(const gfxRGBA& aColor) {
    SetUniform(mUniformLocations[RenderColorUniform], aColor);
  }
};

/*
 * A CopyProgram is an OpenGL program that copies a 4-channel texture
 * to the destination, making no attempt to transform any incoming
 * vertices.  It has the following attributes and uniforms:
 *
 * Attribute inputs:
 *   aVertexCoord  - vertex coordinate
 *   aTexCoord     - texture coordinate
 *
 * Uniforms:
 *   uTexture      - 2D texture unit which to sample
 */

class CopyProgram :
  public LayerManagerOGLProgram
{
public:
  enum {
    TextureUniform = 0,
    NumUniforms
  };

  enum {
    VertexCoordAttrib = 0,
    TexCoordAttrib,
    NumAttribs
  };

  CopyProgram(GLContext *aGL)
    : LayerManagerOGLProgram(aGL)
  { }

  bool Initialize(const char *aVertexShaderString,
                  const char *aFragmentShaderString)
  {
    if (!CreateProgram(aVertexShaderString, aFragmentShaderString))
      return false;

    const char *uniformNames[] = {
      "uTexture",
      NULL
    };

    mUniformLocations.SetLength(NumUniforms);
    GetUniformLocations(uniformNames, &mUniformLocations[0]);

    const char *attribNames[] = {
      "aVertexCoord",
      "aTexCoord",
      NULL
    };

    mAttribLocations.SetLength(NumAttribs);
    GetAttribLocations(attribNames, &mAttribLocations[0]);

    // this is a one-off that's present in the 2DRect versions of some shaders.
    mTexCoordMultiplierUniformLocation =
      mGL->fGetUniformLocation(mProgram, "uTexCoordMultiplier");

    return true;
  }

  GLint AttribLocation(int aWhich) {
    if (aWhich < 0 || aWhich >= int(mAttribLocations.Length()))
      return -1;
    return mAttribLocations[aWhich];
  }

  void SetTextureUnit(GLint aUnit) {
    SetUniform(mUniformLocations[TextureUniform], aUnit);
  }

  GLint GetTexCoordMultiplierUniformLocation() {
    return mTexCoordMultiplierUniformLocation;
  }

protected:
  nsTArray<GLint> mUniformLocations;
  nsTArray<GLint> mAttribLocations;

  GLint mTexCoordMultiplierUniformLocation;
};

} /* layers */
} /* mozilla */

#endif /* GFX_LAYERMANAGEROGLPROGRAM_H */