gecko/tools/trace-malloc/diffbloatdump.pl

241 lines
7.9 KiB
Perl
Executable File

#!/usr/bin/perl -w
# vim:cindent:ts=8:et:sw=4:
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is mozilla.org code.
#
# The Initial Developer of the Original Code is
# Netscape Communications Corporation.
# Portions created by the Initial Developer are Copyright (C) 2001
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
# L. David Baron <dbaron@dbaron.org> (original author)
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK ***** */
# This script produces a diff between two files that are the result of
# calling NS_TraceMallocDumpAllocations. Such files can be created
# through the command-line option --shutdown-leaks=<filename> or through
# the DOM function window.TraceMallocDumpAllocations(<filename>). Both
# methods will work only if --trace-malloc=<malloc-log> is also given on
# the command line.
use 5.004;
use strict;
use Getopt::Long;
$::opt_help = 0;
$::opt_depth = 6;
$::opt_include_zero = 0;
$::opt_allocation_count = 0;
$::opt_use_address = 0;
# XXX Change --use-address to be the default and remove the option
# once tinderbox is no longer using it without --use-address.
Getopt::Long::Configure("pass_through");
Getopt::Long::GetOptions("help", "allocation-count", "depth=i",
"include-zero", "use-address");
if ($::opt_help) {
die "usage: diffbloatdump.pl [options] <dump1> <dump2>
--help Display this message
--allocation-count Use allocation count rather than size (i.e., treat
all sizes as 1).
--depth=<num> Only display <num> frames at top of allocation stack.
--include-zero Display subtrees totalling zero.
--use-address Don't ignore the address part of the stack trace
(can make comparison more accurate when comparing
results from the same build)
The input files (<dump1> and <dump2> above) are either trace-malloc
memory dumps OR this script's output. (If this script's output,
--allocation-count and --use-address are ignored.) If the input files
have .gz or .bz2 extension, they are uncompressed.
";
}
my $calltree = { count => 0 }; # leave children undefined
sub get_child($$) {
my ($node, $frame) = @_;
if (!defined($node->{children})) {
$node->{children} = {};
}
if (!defined($node->{children}->{$frame})) {
$node->{children}->{$frame} = { count => 0 };
}
return $node->{children}->{$frame};
}
sub add_tree_file($$$) {
my ($infile, $firstline, $factor) = @_;
my @nodestack;
$nodestack[1] = $calltree;
$firstline =~ /^(-?\d+) malloc$/;
$calltree->{count} += $1 * $factor;
my $lineno = 1;
while (!eof($infile)) {
my $line = <$infile>;
++$lineno;
$line =~ /^( *)(-?\d+) (.*)$/ || die "malformed input, line $lineno";
my $depth = length($1);
my $count = $2;
my $frame = $3;
die "malformed input, line $lineno" if ($depth % 2 != 0);
$depth /= 2;
die "malformed input, line $lineno" if ($depth > $#nodestack);
$#nodestack = $depth;
my $node = get_child($nodestack[$depth], $frame);
push @nodestack, $node;
$node->{count} += $count * $factor;
}
}
sub add_file($$) {
# Takes (1) a reference to a file descriptor for input and (2) the
# factor to multiply the stacks by (generally +1 or -1).
# Returns a reference to an array representing the stack, allocation
# site in array[0].
sub read_stack($) {
my ($infile) = @_;
my $line;
my @stack;
# read the data at the memory location
while ( defined($infile) && ($line = <$infile>) && substr($line,0,1) eq "\t" ) {
# do nothing
}
# read the stack
do {
chomp($line);
if ( ! $::opt_use_address &&
$line =~ /(.*)\[(.*)\]/) {
$line = $1;
}
$stack[$#stack+1] = $line;
} while ( defined($infile) && ($line = <$infile>) && $line ne "\n" && $line ne "\r\n" );
return \@stack;
}
# adds the stack given as a parameter (reference to array, $stack[0] is
# allocator) to $calltree, with the call count multiplied by $factor
# (typically +1 or -1).
sub add_stack($$) {
my @stack = @{$_[0]};
my $factor = $_[1];
my $i = 0;
my $node = $calltree;
while ($i < $#stack && $i < $::opt_depth) {
$node->{count} += $factor;
$node = get_child($node, $stack[$i]);
++$i;
}
$node->{count} += $factor;
}
my ($infile, $factor) = @_;
if ($infile =~ /\.bz2$/) {
# XXX This doesn't propagate errors from bzip2.
open (INFILE, "bzip2 -cd '$infile' |") || die "Can't open input \"$infile\"";
} elsif ($infile =~ /\.gz$/) {
# XXX This doesn't propagate errors from gzip.
open (INFILE, "gzip -cd '$infile' |") || die "Can't open input \"$infile\"";
} else {
open (INFILE, "<$infile") || die "Can't open input \"$infile\"";
}
my $first = 1;
while ( ! eof(INFILE) ) {
# read the type and address
my $line = <INFILE>;
if ($first) {
$first = 0;
if ($line =~ /^-?\d+ malloc$/) {
# We're capable of reading in our own output as well.
add_tree_file(\*INFILE, $line, $factor);
close INFILE;
return;
}
}
unless ($line =~ /.*\((\d*)\)[\r|\n]/) {
die "badly formed allocation header in $infile";
}
my $size;
if ($::opt_allocation_count) {
$size = 1;
} else {
$size = $1;
}
add_stack(read_stack(\*INFILE), $size * $factor);
}
close INFILE;
}
sub print_node_indent($$$);
sub print_calltree() {
sub print_indent($) {
my ($i) = @_;
while (--$i >= 0) {
print " ";
}
}
sub print_node_indent($$$) {
my ($nodename, $node, $indent) = @_;
if (!$::opt_include_zero && $node->{count} == 0) {
return;
}
print_indent($indent);
print "$node->{count} $nodename\n";
if (defined($node->{children})) {
my %kids = %{$node->{children}};
++$indent;
foreach my $kid (sort { $kids{$b}->{count} <=> $kids{$a}->{count} }
keys (%kids)) {
print_node_indent($kid, $kids{$kid}, $indent);
}
}
}
print_node_indent("malloc", $calltree, 0);
}
add_file($ARGV[0], -1);
add_file($ARGV[1], 1);
print_calltree();