gecko/toolkit/components/places/nsPlacesExpiration.js

938 lines
34 KiB
JavaScript

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
* vim: sw=2 ts=2 sts=2 expandtab
* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* Mozilla Foundation.
* Portions created by the Initial Developer are Copyright (C) 2009
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Marco Bonardo <mak77@bonardo.net> (Original Author)
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/**
* This component handles history and orphans expiration through asynchronous
* Storage statements.
* Expiration runs:
* - At idle, but just once, we stop any other kind of expiration during idle
* to preserve batteries in portable devices.
* - At shutdown, only if the database is dirty, we should still avoid to
* expire too heavily on shutdown.
* - On ClearHistory we run a full expiration for privacy reasons.
* - On a repeating timer we expire in small chunks.
*
* Expiration algorithm will adapt itself based on:
* - Memory size of the device.
* - Status of the database (clean or dirty).
*/
const Cc = Components.classes;
const Ci = Components.interfaces;
const Cu = Components.utils;
Cu.import("resource://gre/modules/XPCOMUtils.jsm");
Cu.import("resource://gre/modules/Services.jsm");
////////////////////////////////////////////////////////////////////////////////
//// nsIFactory
const nsPlacesExpirationFactory = {
_instance: null,
createInstance: function(aOuter, aIID) {
if (aOuter != null)
throw Components.results.NS_ERROR_NO_AGGREGATION;
return this._instance === null ? this._instance = new nsPlacesExpiration() :
this._instance;
},
lockFactory: function (aDoLock) {},
QueryInterface: XPCOMUtils.generateQI([
Ci.nsIFactory
]),
};
////////////////////////////////////////////////////////////////////////////////
//// Constants
// Last expiration step should run before the final sync.
const TOPIC_SHUTDOWN = "places-will-close-connection";
const TOPIC_PREF_CHANGED = "nsPref:changed";
const TOPIC_DEBUG_START_EXPIRATION = "places-debug-start-expiration";
const TOPIC_EXPIRATION_FINISHED = "places-expiration-finished";
const TOPIC_IDLE_BEGIN = "idle";
const TOPIC_IDLE_END = "back";
// Branch for all expiration preferences.
const PREF_BRANCH = "places.history.expiration.";
// Max number of unique URIs to retain in history.
// Notice this is a lazy limit. This means we will start to expire if we will
// go over it, but we won't ensure that we will stop exactly when we reach it,
// instead we will stop after the next expiration step that will bring us
// below it.
// If this preference does not exist or has a negative value, we will calculate
// a limit based on current hardware.
const PREF_MAX_URIS = "max_pages";
const PREF_MAX_URIS_NOTSET = -1; // Use our internally calculated limit.
// We save the current unique URIs limit to this pref, to make it available to
// other components without having to duplicate the full logic.
const PREF_READONLY_CALCULATED_MAX_URIS = "transient_current_max_pages";
// Seconds between each expiration step.
const PREF_INTERVAL_SECONDS = "interval_seconds";
const PREF_INTERVAL_SECONDS_NOTSET = 3 * 60;
// The percentage of system memory we will use for the database's cache.
// Use the same value set in nsNavHistory.cpp. We use the size of the cache to
// evaluate how many pages we can store before going over it.
const PREF_DATABASE_CACHE_PER_MEMORY_PERCENTAGE =
"places.history.cache_per_memory_percentage";
const PREF_DATABASE_CACHE_PER_MEMORY_PERCENTAGE_NOTSET = 6;
// Minimum number of unique URIs to retain. This is used when system-info
// returns bogus values.
const MIN_URIS = 1000;
// Max number of entries to expire at each expiration step.
// This value is globally used for different kind of data we expire, can be
// tweaked based on data type. See below in getBoundStatement.
const EXPIRE_LIMIT_PER_STEP = 6;
// When we run a large expiration step, the above limit is multiplied by this.
const EXPIRE_LIMIT_PER_LARGE_STEP_MULTIPLIER = 10;
// When history is clean or dirty enough we will adapt the expiration algorithm
// to be more lazy or more aggressive.
// This is done acting on the interval between expiration steps and the number
// of expirable items.
// 1. Clean history:
// We expire at (default interval * EXPIRE_AGGRESSIVITY_MULTIPLIER) the
// default number of entries.
// 2. Dirty history:
// We expire at the default interval, but a greater number of entries
// (default number of entries * EXPIRE_AGGRESSIVITY_MULTIPLIER).
const EXPIRE_AGGRESSIVITY_MULTIPLIER = 3;
// This is the average size in bytes of an URI entry in the database.
// Magic numbers are determined through analysis of the distribution of a ratio
// between number of unique URIs and database size among our users. We use a
// more pessimistic ratio on single cores, since we handle some stuff in a
// separate thread.
// Based on these values we evaluate how many unique URIs we can handle before
// going over the database maximum cache size. If we are over the maximum
// number of entries, we will expire.
const URIENTRY_AVG_SIZE_MIN = 2000;
const URIENTRY_AVG_SIZE_MAX = 3000;
// Seconds of idle time before starting a larger expiration step.
// Notice during idle we stop the expiration timer since we don't want to hurt
// stand-by or mobile devices batteries.
const IDLE_TIMEOUT_SECONDS = 5 * 60;
// If a clear history ran just before we shutdown, we will skip most of the
// expiration at shutdown. This is maximum number of seconds from last
// clearHistory to decide to skip expiration at shutdown.
const SHUTDOWN_WITH_RECENT_CLEARHISTORY_TIMEOUT_SECONDS = 10;
const USECS_PER_DAY = 86400000000;
const ANNOS_EXPIRE_POLICIES = [
{ bind: "expire_days",
type: Ci.nsIAnnotationService.EXPIRE_DAYS,
time: 7 * USECS_PER_DAY },
{ bind: "expire_weeks",
type: Ci.nsIAnnotationService.EXPIRE_WEEKS,
time: 30 * USECS_PER_DAY },
{ bind: "expire_months",
type: Ci.nsIAnnotationService.EXPIRE_MONTHS,
time: 180 * USECS_PER_DAY },
];
// When we expire we can use these limits:
// - SMALL for usual partial expirations, will expire a small chunk.
// - LARGE for idle or shutdown expirations, will expire a large chunk.
// - UNLIMITED for clearHistory, will expire everything.
// - DEBUG will use a known limit, passed along with the debug notification.
const LIMIT = {
SMALL: 0,
LARGE: 1,
UNLIMITED: 2,
DEBUG: 3,
};
// Represents the status of history database.
const STATUS = {
CLEAN: 0,
DIRTY: 1,
UNKNOWN: 2,
};
// Represents actions on which a query will run.
const ACTION = {
TIMED: 1 << 0, // happens every this._interval
CLEAR_HISTORY: 1 << 1, // happens when history is cleared
SHUTDOWN: 1 << 2, // happens at shutdown when the db has a DIRTY state
CLEAN_SHUTDOWN: 1 << 3, // happens at shutdown when the db has a CLEAN or
// UNKNOWN state
IDLE: 1 << 4, // happens once on idle
DEBUG: 1 << 5, // happens whenever TOPIC_DEBUG_START_EXPIRATION is dispatched
TIMED_OVERLIMIT: 1 << 6, // just like TIMED, but also when we have too much
// history
};
// The queries we use to expire.
const EXPIRATION_QUERIES = {
// Finds visits to be expired. Will return nothing if we are not over the
// unique URIs limit.
QUERY_FIND_VISITS_TO_EXPIRE: {
sql: "INSERT INTO expiration_notify "
+ "(v_id, url, visit_date, expected_results) "
+ "SELECT v.id, h.url, v.visit_date, :limit_visits "
+ "FROM moz_historyvisits v "
+ "JOIN moz_places h ON h.id = v.place_id "
+ "WHERE (SELECT COUNT(*) FROM moz_places) > :max_uris "
+ "ORDER BY v.visit_date ASC "
+ "LIMIT :limit_visits",
actions: ACTION.TIMED_OVERLIMIT | ACTION.SHUTDOWN | ACTION.IDLE |
ACTION.DEBUG
},
// Removes the previously found visits.
QUERY_EXPIRE_VISITS: {
sql: "DELETE FROM moz_historyvisits WHERE id IN ( "
+ "SELECT v_id FROM expiration_notify WHERE v_id NOTNULL "
+ ")",
actions: ACTION.TIMED_OVERLIMIT | ACTION.SHUTDOWN | ACTION.IDLE |
ACTION.DEBUG
},
// Finds orphan URIs in the database.
// Notice we won't notify single removed URIs on removeAllPages, so we don't
// run this query in such a case, but just delete URIs.
QUERY_FIND_URIS_TO_EXPIRE: {
sql: "INSERT INTO expiration_notify "
+ "(p_id, url, visit_date, expected_results) "
+ "SELECT h.id, h.url, h.last_visit_date, :limit_uris "
+ "FROM moz_places h "
+ "LEFT JOIN moz_historyvisits v ON h.id = v.place_id "
+ "LEFT JOIN moz_bookmarks b ON h.id = b.fk "
+ "WHERE v.id IS NULL "
+ "AND b.id IS NULL "
+ "AND h.ROWID <> IFNULL(:null_skips_last, (SELECT MAX(ROWID) FROM moz_places)) "
+ "LIMIT :limit_uris",
actions: ACTION.TIMED | ACTION.TIMED_OVERLIMIT | ACTION.SHUTDOWN |
ACTION.IDLE | ACTION.DEBUG
},
// Expire found URIs from the database.
QUERY_EXPIRE_URIS: {
sql: "DELETE FROM moz_places WHERE id IN ( "
+ "SELECT p_id FROM expiration_notify WHERE p_id NOTNULL "
+ ")",
actions: ACTION.TIMED | ACTION.TIMED_OVERLIMIT | ACTION.SHUTDOWN |
ACTION.IDLE | ACTION.DEBUG
},
// Expire orphan URIs from the database.
QUERY_SILENT_EXPIRE_ORPHAN_URIS: {
sql: "DELETE FROM moz_places WHERE id IN ( "
+ "SELECT h.id "
+ "FROM moz_places h "
+ "LEFT JOIN moz_historyvisits v ON h.id = v.place_id "
+ "LEFT JOIN moz_bookmarks b ON h.id = b.fk "
+ "WHERE v.id IS NULL "
+ "AND b.id IS NULL "
+ "LIMIT :limit_uris "
+ ")",
actions: ACTION.CLEAR_HISTORY
},
// Expire orphan icons from the database.
QUERY_EXPIRE_FAVICONS: {
sql: "DELETE FROM moz_favicons WHERE id IN ( "
+ "SELECT f.id FROM moz_favicons f "
+ "LEFT JOIN moz_places h ON f.id = h.favicon_id "
+ "WHERE h.favicon_id IS NULL "
+ "LIMIT :limit_favicons "
+ ")",
actions: ACTION.TIMED | ACTION.TIMED_OVERLIMIT | ACTION.CLEAR_HISTORY |
ACTION.SHUTDOWN | ACTION.IDLE | ACTION.DEBUG
},
// Expire orphan page annotations from the database.
QUERY_EXPIRE_ANNOS: {
sql: "DELETE FROM moz_annos WHERE id in ( "
+ "SELECT a.id FROM moz_annos a "
+ "LEFT JOIN moz_places h ON a.place_id = h.id "
+ "LEFT JOIN moz_historyvisits v ON a.place_id = v.place_id "
+ "WHERE h.id IS NULL "
+ "OR (v.id IS NULL AND a.expiration <> :expire_never) "
+ "LIMIT :limit_annos "
+ ")",
actions: ACTION.TIMED | ACTION.TIMED_OVERLIMIT | ACTION.CLEAR_HISTORY |
ACTION.SHUTDOWN | ACTION.IDLE | ACTION.DEBUG
},
// Expire page annotations based on expiration policy.
QUERY_EXPIRE_ANNOS_WITH_POLICY: {
sql: "DELETE FROM moz_annos "
+ "WHERE (expiration = :expire_days "
+ "AND :expire_days_time > MAX(lastModified, dateAdded)) "
+ "OR (expiration = :expire_weeks "
+ "AND :expire_weeks_time > MAX(lastModified, dateAdded)) "
+ "OR (expiration = :expire_months "
+ "AND :expire_months_time > MAX(lastModified, dateAdded))",
actions: ACTION.TIMED | ACTION.TIMED_OVERLIMIT | ACTION.CLEAR_HISTORY |
ACTION.SHUTDOWN | ACTION.IDLE | ACTION.DEBUG
},
// Expire items annotations based on expiration policy.
QUERY_EXPIRE_ITEMS_ANNOS_WITH_POLICY: {
sql: "DELETE FROM moz_items_annos "
+ "WHERE (expiration = :expire_days "
+ "AND :expire_days_time > MAX(lastModified, dateAdded)) "
+ "OR (expiration = :expire_weeks "
+ "AND :expire_weeks_time > MAX(lastModified, dateAdded)) "
+ "OR (expiration = :expire_months "
+ "AND :expire_months_time > MAX(lastModified, dateAdded))",
actions: ACTION.TIMED | ACTION.TIMED_OVERLIMIT | ACTION.CLEAR_HISTORY |
ACTION.SHUTDOWN | ACTION.IDLE | ACTION.DEBUG
},
// Expire page annotations based on expiration policy.
QUERY_EXPIRE_ANNOS_WITH_HISTORY: {
sql: "DELETE FROM moz_annos "
+ "WHERE expiration = :expire_with_history "
+ "AND NOT EXISTS (SELECT id FROM moz_historyvisits "
+ "WHERE place_id = moz_annos.place_id LIMIT 1)",
actions: ACTION.TIMED | ACTION.TIMED_OVERLIMIT | ACTION.CLEAR_HISTORY |
ACTION.SHUTDOWN | ACTION.IDLE | ACTION.DEBUG
},
// Expire item annos without a corresponding item id.
QUERY_EXPIRE_ITEMS_ANNOS: {
sql: "DELETE FROM moz_items_annos WHERE id IN ( "
+ "SELECT a.id FROM moz_items_annos a "
+ "LEFT JOIN moz_bookmarks b ON a.item_id = b.id "
+ "WHERE b.id IS NULL "
+ "LIMIT :limit_annos "
+ ")",
actions: ACTION.CLEAR_HISTORY | ACTION.SHUTDOWN | ACTION.IDLE | ACTION.DEBUG
},
// Expire all annotation names without a corresponding annotation.
QUERY_EXPIRE_ANNO_ATTRIBUTES: {
sql: "DELETE FROM moz_anno_attributes WHERE id IN ( "
+ "SELECT n.id FROM moz_anno_attributes n "
+ "LEFT JOIN moz_annos a ON n.id = a.anno_attribute_id "
+ "LEFT JOIN moz_items_annos t ON n.id = t.anno_attribute_id "
+ "WHERE a.anno_attribute_id IS NULL "
+ "AND t.anno_attribute_id IS NULL "
+ "LIMIT :limit_annos"
+ ")",
actions: ACTION.CLEAR_HISTORY | ACTION.SHUTDOWN | ACTION.IDLE | ACTION.DEBUG
},
// Expire orphan inputhistory.
QUERY_EXPIRE_INPUTHISTORY: {
sql: "DELETE FROM moz_inputhistory WHERE place_id IN ( "
+ "SELECT i.place_id FROM moz_inputhistory i "
+ "LEFT JOIN moz_places h ON h.id = i.place_id "
+ "WHERE h.id IS NULL "
+ "LIMIT :limit_inputhistory "
+ ")",
actions: ACTION.CLEAR_HISTORY | ACTION.SHUTDOWN | ACTION.IDLE | ACTION.DEBUG
},
// Expire all session annotations. Should only be called at shutdown.
QUERY_EXPIRE_ANNOS_SESSION: {
sql: "DELETE FROM moz_annos WHERE expiration = :expire_session",
actions: ACTION.CLEAR_HISTORY | ACTION.SHUTDOWN | ACTION.CLEAN_SHUTDOWN |
ACTION.DEBUG
},
// Expire all session item annotations. Should only be called at shutdown.
QUERY_EXPIRE_ITEMS_ANNOS_SESSION: {
sql: "DELETE FROM moz_items_annos WHERE expiration = :expire_session",
actions: ACTION.CLEAR_HISTORY | ACTION.SHUTDOWN | ACTION.CLEAN_SHUTDOWN |
ACTION.DEBUG
},
// Select entries for notifications.
// If p_id is set whole_entry = 1, then we have expired the full page.
// Either p_id or v_id are always set.
QUERY_SELECT_NOTIFICATIONS: {
sql: "SELECT url, MAX(visit_date) AS visit_date, "
+ "MAX(IFNULL(MIN(p_id, 1), MIN(v_id, 0))) AS whole_entry, "
+ "expected_results "
+ "FROM expiration_notify "
+ "GROUP BY url",
actions: ACTION.TIMED | ACTION.TIMED_OVERLIMIT | ACTION.SHUTDOWN |
ACTION.IDLE | ACTION.DEBUG
},
// Empty the notifications table.
QUERY_DELETE_NOTIFICATIONS: {
sql: "DELETE FROM expiration_notify",
actions: ACTION.TIMED | ACTION.TIMED_OVERLIMIT | ACTION.SHUTDOWN |
ACTION.IDLE | ACTION.DEBUG
},
// The following queries are used to adjust the sqlite_stat1 table to help the
// query planner create better queries. These should always be run LAST, and
// are therefore at the end of the object.
QUERY_ANALYZE_MOZ_PLACES: {
sql: "ANALYZE moz_places",
actions: ACTION.TIMED_OVERLIMIT | ACTION.CLEAR_HISTORY | ACTION.IDLE |
ACTION.DEBUG
},
QUERY_ANALYZE_MOZ_BOOKMARKS: {
sql: "ANALYZE moz_bookmarks",
actions: ACTION.IDLE | ACTION.DEBUG
},
QUERY_ANALYZE_MOZ_HISTORYVISITS: {
sql: "ANALYZE moz_historyvisits",
actions: ACTION.TIMED_OVERLIMIT | ACTION.CLEAR_HISTORY | ACTION.IDLE |
ACTION.DEBUG
},
QUERY_ANALYZE_MOZ_INPUTHISTORY: {
sql: "ANALYZE moz_inputhistory",
actions: ACTION.TIMED | ACTION.TIMED_OVERLIMIT | ACTION.CLEAR_HISTORY |
ACTION.IDLE | ACTION.DEBUG
},
};
////////////////////////////////////////////////////////////////////////////////
//// nsPlacesExpiration definition
function nsPlacesExpiration()
{
//////////////////////////////////////////////////////////////////////////////
//// Smart Getters
XPCOMUtils.defineLazyGetter(this, "_db", function () {
let db = Cc["@mozilla.org/browser/nav-history-service;1"].
getService(Ci.nsPIPlacesDatabase).
DBConnection;
// Create the temporary notifications table.
let stmt = db.createAsyncStatement(
"CREATE TEMP TABLE expiration_notify ( "
+ " id INTEGER PRIMARY KEY "
+ ", v_id INTEGER "
+ ", p_id INTEGER "
+ ", url TEXT NOT NULL "
+ ", visit_date INTEGER "
+ ", expected_results INTEGER NOT NULL "
+ ") ");
stmt.executeAsync();
stmt.finalize();
return db;
});
XPCOMUtils.defineLazyServiceGetter(this, "_hsn",
"@mozilla.org/browser/nav-history-service;1",
"nsPIPlacesHistoryListenersNotifier");
XPCOMUtils.defineLazyServiceGetter(this, "_sys",
"@mozilla.org/system-info;1",
"nsIPropertyBag2");
XPCOMUtils.defineLazyServiceGetter(this, "_idle",
"@mozilla.org/widget/idleservice;1",
"nsIIdleService");
this._prefBranch = Cc["@mozilla.org/preferences-service;1"].
getService(Ci.nsIPrefService).
getBranch(PREF_BRANCH).
QueryInterface(Ci.nsIPrefBranch2);
this._loadPrefs();
// Observe our preferences branch for changes.
this._prefBranch.addObserver("", this, false);
// Register topic observers.
Services.obs.addObserver(this, TOPIC_SHUTDOWN, false);
Services.obs.addObserver(this, TOPIC_DEBUG_START_EXPIRATION, false);
// Create our expiration timer.
this._newTimer();
}
nsPlacesExpiration.prototype = {
//////////////////////////////////////////////////////////////////////////////
//// nsIObserver
observe: function PEX_observe(aSubject, aTopic, aData)
{
if (aTopic == TOPIC_SHUTDOWN) {
this._shuttingDown = true;
Services.obs.removeObserver(this, TOPIC_SHUTDOWN);
Services.obs.removeObserver(this, TOPIC_DEBUG_START_EXPIRATION);
this._prefBranch.removeObserver("", this);
this.expireOnIdle = false;
if (this._timer) {
this._timer.cancel();
this._timer = null;
}
// If we ran a clearHistory recently, or database id not dirty, we don't want to spend
// time expiring on shutdown. In such a case just expire session annotations.
let hasRecentClearHistory =
Date.now() - this._lastClearHistoryTime <
SHUTDOWN_WITH_RECENT_CLEARHISTORY_TIMEOUT_SECONDS * 1000;
let action = hasRecentClearHistory ||
this.status != STATUS.DIRTY ? ACTION.CLEAN_SHUTDOWN
: ACTION.SHUTDOWN;
this._expireWithActionAndLimit(action, LIMIT.LARGE);
this._finalizeInternalStatements();
}
else if (aTopic == TOPIC_PREF_CHANGED) {
this._loadPrefs();
if (aData == PREF_INTERVAL_SECONDS) {
// Renew the timer with the new interval value.
this._newTimer();
}
}
else if (aTopic == TOPIC_DEBUG_START_EXPIRATION) {
this._debugLimit = aData || -1; // Don't limit if unspecified.
this._expireWithActionAndLimit(ACTION.DEBUG, LIMIT.DEBUG);
}
else if (aTopic == TOPIC_IDLE_BEGIN) {
// Stop the expiration timer. We don't want to keep up expiring on idle
// to preserve batteries on mobile devices and avoid killing stand-by.
if (this._timer) {
this._timer.cancel();
this._timer = null;
}
if (this.expireOnIdle)
this._expireWithActionAndLimit(ACTION.IDLE, LIMIT.LARGE);
}
else if (aTopic == TOPIC_IDLE_END) {
// Restart the expiration timer.
if (!this._timer)
this._newTimer();
}
},
//////////////////////////////////////////////////////////////////////////////
//// nsINavHistoryObserver
_inBatchMode: false,
onBeginUpdateBatch: function PEX_onBeginUpdateBatch()
{
this._inBatchMode = true;
// We do not want to expire while we are doing batch work.
if (this._timer) {
this._timer.cancel();
this._timer = null;
}
},
onEndUpdateBatch: function PEX_onEndUpdateBatch()
{
this._inBatchMode = false;
// Restore timer.
if (!this._timer)
this._newTimer();
},
_lastClearHistoryTime: 0,
onClearHistory: function PEX_onClearHistory() {
this._lastClearHistoryTime = Date.now();
// Expire orphans. History status is clean after a clear history.
this.status = STATUS.CLEAN;
this._expireWithActionAndLimit(ACTION.CLEAR_HISTORY, LIMIT.UNLIMITED);
},
onVisit: function() {},
onTitleChanged: function() {},
onBeforeDeleteURI: function() {},
onDeleteURI: function() {},
onPageChanged: function() {},
onDeleteVisits: function() {},
//////////////////////////////////////////////////////////////////////////////
//// nsITimerCallback
notify: function PEX_timerCallback()
{
// Check if we are over history capacity, if so visits must be expired.
if (!this._cachedStatements["LIMIT_COUNT"]) {
this._cachedStatements["LIMIT_COUNT"] = this._db.createAsyncStatement(
"SELECT COUNT(*) FROM moz_places"
);
}
let self = this;
this._cachedStatements["LIMIT_COUNT"].executeAsync({
handleResult: function(aResults) {
let row = aResults.getNextRow();
self._overLimit = row.getResultByIndex(0) > self._urisLimit;
},
handleCompletion: function (aReason) {
if (aReason != Ci.mozIStorageStatementCallback.REASON_FINISHED)
return;
let action = self._overLimit ? ACTION.TIMED_OVERLIMIT : ACTION.TIMED;
self._expireWithActionAndLimit(action, LIMIT.SMALL);
},
handleError: function(aError) {
Cu.reportError("Async statement execution returned with '" +
aError.result + "', '" + aError.message + "'");
}
});
},
//////////////////////////////////////////////////////////////////////////////
//// mozIStorageStatementCallback
handleResult: function PEX_handleResult(aResultSet)
{
// We don't want to notify after shutdown.
if (this._shuttingDown)
return;
let row;
while (row = aResultSet.getNextRow()) {
if (!("_expectedResultsCount" in this))
this._expectedResultsCount = row.getResultByName("expected_results");
if (this._expectedResultsCount > 0)
this._expectedResultsCount--;
let uri = Services.io.newURI(row.getResultByName("url"), null, null);
let visitDate = row.getResultByName("visit_date");
let wholeEntry = row.getResultByName("whole_entry");
// Dispatch expiration notifications to history.
this._hsn.notifyOnPageExpired(uri, visitDate, wholeEntry);
}
},
handleError: function PEX_handleError(aError)
{
Cu.reportError("Async statement execution returned with '" +
aError.result + "', '" + aError.message + "'");
},
handleCompletion: function PEX_handleCompletion(aReason)
{
if (aReason == Ci.mozIStorageStatementCallback.REASON_FINISHED) {
if ("_expectedResultsCount" in this) {
// Adapt the aggressivity of steps based on the status of history.
// A dirty history will return all the entries we are expecting bringing
// our countdown to zero, while a clean one will not.
this.status = this._expectedResultsCount == 0 ? STATUS.DIRTY
: STATUS.CLEAN;
delete this._expectedResultsCount;
}
// Dispatch a notification that expiration has finished.
Services.obs.notifyObservers(null, TOPIC_EXPIRATION_FINISHED, null);
}
},
//////////////////////////////////////////////////////////////////////////////
//// nsPlacesExpiration
_urisLimit: PREF_MAX_URIS_NOTSET,
_interval: PREF_INTERVAL_SECONDS_NOTSET,
_shuttingDown: false,
_status: STATUS.UNKNOWN,
set status(aNewStatus) {
if (aNewStatus != this._status) {
// If status changes we should restart the timer.
this._status = aNewStatus;
this._newTimer();
// If needed add/remove the cleanup step on idle. We want to expire on
// idle only if history is dirty, to preserve mobile devices batteries.
this.expireOnIdle = aNewStatus == STATUS.DIRTY;
}
return aNewStatus;
},
get status() this._status,
_isIdleObserver: false,
_expireOnIdle: false,
set expireOnIdle(aExpireOnIdle) {
// Observe idle regardless, since we want to stop timed expiration.
if (!this._isIdleObserver && !this._shuttingDown) {
this._idle.addIdleObserver(this, IDLE_TIMEOUT_SECONDS);
this._isIdleObserver = true;
}
else if (this._isIdleObserver && this._shuttingDown) {
this._idle.removeIdleObserver(this, IDLE_TIMEOUT_SECONDS);
this._isIdleObserver = false;
}
// If running a debug expiration we need full control of what happens
// but idle cleanup could activate in the middle, since tinderboxes are
// permanently idle. That would cause unexpected oranges, so disable it.
if (this._debugLimit !== undefined)
this._expireOnIdle = false;
else
this._expireOnIdle = aExpireOnIdle;
return this._expireOnIdle;
},
get expireOnIdle() this._expireOnIdle,
_loadPrefs: function PEX__loadPrefs() {
// Get the user's limit, if it was set.
try {
// We want to silently fail since getIntPref throws if it does not exist,
// and use a default to fallback to.
this._urisLimit = this._prefBranch.getIntPref(PREF_MAX_URIS);
}
catch(e) {}
if (this._urisLimit < 0) {
// The preference did not exist or has a negative value, so we calculate a
// limit based on hardware.
let memsize = this._sys.getProperty("memsize"); // Memory size in bytes.
let cpucount = this._sys.getProperty("cpucount"); // CPU count.
const AVG_SIZE_PER_URIENTRY = cpucount > 1 ? URIENTRY_AVG_SIZE_MIN
: URIENTRY_AVG_SIZE_MAX;
// We will try to live inside the database cache size, since working out
// of it can be really slow.
let cache_percentage = PREF_DATABASE_CACHE_PER_MEMORY_PERCENTAGE_NOTSET;
try {
let prefs = Cc["@mozilla.org/preferences-service;1"].
getService(Ci.nsIPrefBranch);
cache_percentage =
prefs.getIntPref(PREF_DATABASE_CACHE_PER_MEMORY_PERCENTAGE);
if (cache_percentage < 0) {
cache_percentage = 0;
}
else if (cache_percentage > 50) {
cache_percentage = 50;
}
}
catch(e) {}
let cachesize = memsize * cache_percentage / 100;
this._urisLimit = Math.max(MIN_URIS,
parseInt(cachesize / AVG_SIZE_PER_URIENTRY));
}
// Expose the calculated limit to other components.
this._prefBranch.setIntPref(PREF_READONLY_CALCULATED_MAX_URIS,
this._urisLimit);
// Get the expiration interval value.
try {
// We want to silently fail since getIntPref throws if it does not exist,
// and use a default to fallback to.
this._interval = this._prefBranch.getIntPref(PREF_INTERVAL_SECONDS);
}
catch (e) {}
if (this._interval <= 0)
this._interval = PREF_INTERVAL_SECONDS_NOTSET;
},
/**
* Execute async statements to expire with the specified queries.
*
* @param aAction
* The ACTION we are expiring for. See the ACTION const for values.
* @param aLimit
* Whether to use small, large or no limits when expiring. See the
* LIMIT const for values.
*/
_expireWithActionAndLimit:
function PEX__expireWithActionAndLimit(aAction, aLimit)
{
// Skip expiration during batch mode.
if (this._inBatchMode)
return;
let boundStatements = [];
for (let queryType in EXPIRATION_QUERIES) {
if (EXPIRATION_QUERIES[queryType].actions & aAction)
boundStatements.push(this._getBoundStatement(queryType, aLimit, aAction));
}
// Execute statements asynchronously in a transaction.
this._db.executeAsync(boundStatements, boundStatements.length, this);
},
/**
* Finalizes all of our mozIStorageStatements so we can properly close the
* database.
*/
_finalizeInternalStatements: function PEX__finalizeInternalStatements()
{
for each (let stmt in this._cachedStatements) {
stmt.finalize();
}
},
/**
* Generate the statement used for expiration.
*
* @param aQueryType
* Type of the query to build statement for.
* @param aLimit
* Whether to use small, large or no limits when expiring. See the
* LIMIT const for values.
* @param aAction
* Current action causing the expiration. See the ACTION const.
*/
_cachedStatements: {},
_getBoundStatement: function PEX__getBoundStatement(aQueryType, aLimit, aAction)
{
// Statements creation can be expensive, so we want to cache them.
let stmt = this._cachedStatements[aQueryType];
if (stmt === undefined) {
stmt = this._cachedStatements[aQueryType] =
this._db.createAsyncStatement(EXPIRATION_QUERIES[aQueryType].sql);
}
let baseLimit;
switch (aLimit) {
case LIMIT.UNLIMITED:
baseLimit = -1;
break;
case LIMIT.SMALL:
baseLimit = EXPIRE_LIMIT_PER_STEP;
break;
case LIMIT.LARGE:
baseLimit = EXPIRE_LIMIT_PER_STEP * EXPIRE_LIMIT_PER_LARGE_STEP_MULTIPLIER;
break;
case LIMIT.DEBUG:
baseLimit = this._debugLimit;
break;
}
if (this.status == STATUS.DIRTY && aLimit != LIMIT.DEBUG)
baseLimit *= EXPIRE_AGGRESSIVITY_MULTIPLIER;
// Bind the appropriate parameters.
let params = stmt.params;
switch (aQueryType) {
case "QUERY_FIND_VISITS_TO_EXPIRE":
params.max_uris = this._urisLimit;
params.limit_visits = baseLimit;
break;
case "QUERY_FIND_URIS_TO_EXPIRE":
// We could run in the middle of adding a new visit or bookmark to
// a new page. In such a case since we are async, we could end up
// expiring the page before it actually gets the visit or bookmark,
// thinking it's an orphan. So we never expire the last added page
// when expiration does not run on user action.
if (aAction != ACTION.TIMED && aAction != ACTION.TIMED_OVERLIMIT &&
aAction != ACTION.IDLE) {
params.null_skips_last = -1;
}
else {
params.null_skips_last = null;
}
params.limit_uris = baseLimit;
break;
case "QUERY_SILENT_EXPIRE_ORPHAN_URIS":
params.limit_uris = baseLimit;
break;
case "QUERY_EXPIRE_FAVICONS":
params.limit_favicons = baseLimit;
break;
case "QUERY_EXPIRE_ANNOS":
params.expire_never = Ci.nsIAnnotationService.EXPIRE_NEVER;
params.limit_annos = baseLimit;
break;
case "QUERY_EXPIRE_ANNOS_WITH_POLICY":
case "QUERY_EXPIRE_ITEMS_ANNOS_WITH_POLICY":
let microNow = Date.now() * 1000;
ANNOS_EXPIRE_POLICIES.forEach(function(policy) {
params[policy.bind] = policy.type;
params[policy.bind + "_time"] = microNow - policy.time;
});
break;
case "QUERY_EXPIRE_ANNOS_WITH_HISTORY":
params.expire_with_history = Ci.nsIAnnotationService.EXPIRE_WITH_HISTORY;
break;
case "QUERY_EXPIRE_ITEMS_ANNOS":
params.limit_annos = baseLimit;
break;
case "QUERY_EXPIRE_ANNO_ATTRIBUTES":
params.limit_annos = baseLimit;
break;
case "QUERY_EXPIRE_INPUTHISTORY":
params.limit_inputhistory = baseLimit;
break;
case "QUERY_EXPIRE_ANNOS_SESSION":
case "QUERY_EXPIRE_ITEMS_ANNOS_SESSION":
params.expire_session = Ci.nsIAnnotationService.EXPIRE_SESSION;
break;
}
return stmt;
},
/**
* Creates a new timer based on this._interval.
*
* @return a REPEATING_SLACK nsITimer that runs every this._interval.
*/
_newTimer: function PEX__newTimer()
{
if (this._timer)
this._timer.cancel();
if (this._shuttingDown)
return;
let interval = this.status != STATUS.DIRTY ?
this._interval * EXPIRE_AGGRESSIVITY_MULTIPLIER : this._interval;
let timer = Cc["@mozilla.org/timer;1"].createInstance(Ci.nsITimer);
timer.initWithCallback(this, interval * 1000,
Ci.nsITimer.TYPE_REPEATING_SLACK);
return this._timer = timer;
},
//////////////////////////////////////////////////////////////////////////////
//// nsISupports
classID: Components.ID("705a423f-2f69-42f3-b9fe-1517e0dee56f"),
_xpcom_factory: nsPlacesExpirationFactory,
QueryInterface: XPCOMUtils.generateQI([
Ci.nsIObserver,
Ci.nsINavHistoryObserver,
Ci.nsITimerCallback,
Ci.mozIStorageStatementCallback,
])
};
////////////////////////////////////////////////////////////////////////////////
//// Module Registration
let components = [nsPlacesExpiration];
var NSGetFactory = XPCOMUtils.generateNSGetFactory(components);