gecko/intl/uconv/public/nsIUnicodeDecoder.h

190 lines
7.5 KiB
C++

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is Mozilla Communicator client code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either of the GNU General Public License Version 2 or later (the "GPL"),
* or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#ifndef nsIUnicodeDecoder_h___
#define nsIUnicodeDecoder_h___
#include "nscore.h"
#include "nsISupports.h"
// Interface ID for our Unicode Decoder interface
// {25359602-FC70-4d13-A9AB-8086D3827C0D}
//NS_DECLARE_ID(kIUnicodeDecoderIID,
// 0x25359602, 0xfc70, 0x4d13, 0xa9, 0xab, 0x80, 0x86, 0xd3, 0x82, 0x7c, 0xd);
#define NS_IUNICODEDECODER_IID \
{ 0x25359602, 0xfc70, 0x4d13, \
{ 0xa9, 0xab, 0x80, 0x86, 0xd3, 0x82, 0x7c, 0xd }}
// XXX deprecated
/*---------- BEGIN DEPRECATED */
#define NS_EXACT_LENGTH \
NS_ERROR_GENERATE_SUCCESS(NS_ERROR_MODULE_UCONV, 11)
#define NS_PARTIAL_MORE_INPUT \
NS_ERROR_GENERATE_SUCCESS(NS_ERROR_MODULE_UCONV, 12)
#define NS_PARTIAL_MORE_OUTPUT \
NS_ERROR_GENERATE_SUCCESS(NS_ERROR_MODULE_UCONV, 13)
#define NS_ERROR_ILLEGAL_INPUT \
NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_UCONV, 14)
/*---------- END DEPRECATED */
// XXX make us hex! (same digits though)
#define NS_OK_UDEC_EXACTLENGTH \
NS_ERROR_GENERATE_SUCCESS(NS_ERROR_MODULE_UCONV, 11)
#define NS_OK_UDEC_MOREINPUT \
NS_ERROR_GENERATE_SUCCESS(NS_ERROR_MODULE_UCONV, 12)
#define NS_OK_UDEC_MOREOUTPUT \
NS_ERROR_GENERATE_SUCCESS(NS_ERROR_MODULE_UCONV, 13)
#define NS_ERROR_UDEC_ILLEGALINPUT \
NS_ERROR_GENERATE_FAILURE(NS_ERROR_MODULE_UCONV, 14)
#define NS_OK_UDEC_NOBOMFOUND \
NS_ERROR_GENERATE_SUCCESS(NS_ERROR_MODULE_UCONV, 14)
#define NS_UNICODEDECODER_CONTRACTID_BASE "@mozilla.org/intl/unicode/decoder;1?charset="
/**
* Interface for a Converter from a Charset into Unicode.
*
* @created 23/Nov/1998
* @author Catalin Rotaru [CATA]
*/
class nsIUnicodeDecoder : public nsISupports
{
public:
NS_DECLARE_STATIC_IID_ACCESSOR(NS_IUNICODEDECODER_IID)
enum {
kOnError_Recover, // on an error, recover and continue
kOnError_Signal // on an error, stop and signal
};
/**
* Converts the data from one Charset to Unicode.
*
* About the byte ordering:
* - For input, if the converter cares (that depends of the charset, for
* example a singlebyte will ignore the byte ordering) it should assume
* network order. If necessary and requested, we can add a method
* SetInputByteOrder() so that the reverse order can be used, too. That
* method would have as default the assumed network order.
* - The output stream is Unicode, having the byte order which is internal
* for the machine on which the converter is running on.
*
* Unless there is not enough output space, this method must consume all the
* available input data! The eventual incomplete final character data will be
* stored internally in the converter and used when the method is called
* again for continuing the conversion. This way, the caller will not have to
* worry about managing incomplete input data by mergeing it with the next
* buffer.
*
* Error conditions:
* If the read value does not belong to this character set, one should
* replace it with the Unicode special 0xFFFD. When an actual input error is
* encountered, like a format error, the converter stop and return error.
* Hoever, we should keep in mind that we need to be lax in decoding.
*
* Converter required behavior:
* In this order: when output space is full - return right away. When input
* data is wrong, return input pointer right after the wrong byte. When
* partial input, it will be consumed and cached. All the time input pointer
* will show how much was actually consumed and how much was actually
* written.
*
* @param aSrc [IN] the source data buffer
* @param aSrcLength [IN/OUT] the length of source data buffer; after
* conversion will contain the number of bytes read
* @param aDest [OUT] the destination data buffer
* @param aDestLength [IN/OUT] the length of the destination data buffer;
* after conversion will contain the number of Unicode
* characters written
* @return NS_PARTIAL_MORE_INPUT if only a partial conversion was
* done; more input is needed to continue
* NS_PARTIAL_MORE_OUTPUT if only a partial conversion
* was done; more output space is needed to continue
* NS_ERROR_ILLEGAL_INPUT if an illegal input sequence
* was encountered and the behavior was set to "signal"
*/
NS_IMETHOD Convert(const char * aSrc, PRInt32 * aSrcLength,
PRUnichar * aDest, PRInt32 * aDestLength) = 0;
/**
* Returns a quick estimation of the size of the buffer needed to hold the
* converted data. Remember: this estimation is >= with the actual size of
* the buffer needed. It will be computed for the "worst case"
*
* @param aSrc [IN] the source data buffer
* @param aSrcLength [IN] the length of source data buffer
* @param aDestLength [OUT] the needed size of the destination buffer
* @return NS_EXACT_LENGTH if an exact length was computed
* NS_OK is all we have is an approximation
*/
NS_IMETHOD GetMaxLength(const char * aSrc, PRInt32 aSrcLength,
PRInt32 * aDestLength) = 0;
/**
* Resets the charset converter so it may be recycled for a completely
* different and urelated buffer of data.
*/
NS_IMETHOD Reset() = 0;
/**
* Specify what to do when a character cannot be mapped into unicode
*
* @param aBehavior [IN] the desired behavior
* @see kOnError_Recover
* @see kOnError_Signal
*/
virtual void SetInputErrorBehavior(PRInt32 aBehavior) = 0;
/**
* return the UNICODE character for unmapped character
*/
virtual PRUnichar GetCharacterForUnMapped() = 0;
};
NS_DEFINE_STATIC_IID_ACCESSOR(nsIUnicodeDecoder, NS_IUNICODEDECODER_IID)
#endif /* nsIUnicodeDecoder_h___ */