gecko/js/tests/ecma_3/Unicode/uc-005.js

277 lines
7.6 KiB
JavaScript
Raw Blame History

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is JavaScript Engine testing utilities.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corp.
* Portions created by the Initial Developer are Copyright (C) 2002
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* rogerl@netscape.com, pschwartau@netscape.com
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/*
*
* Date: 15 July 2002
* SUMMARY: Testing identifiers with double-byte names
* See http://bugzilla.mozilla.org/show_bug.cgi?id=58274
*
* Here is a sample of the problem:
*
* js> function f\u02B1 () {}
*
* js> f\u02B1.toSource();
* function f<>() {}
*
* js> f\u02B1.toSource().toSource();
* (new String("function f\xB1() {}"))
*
*
* See how the high-byte information (the 02) has been lost?
* The same thing was happening with the toString() method:
*
* js> f\u02B1.toString();
*
* function f<>() {
* }
*
* js> f\u02B1.toString().toSource();
* (new String("\nfunction f\xB1() {\n}\n"))
*
*/
//-----------------------------------------------------------------------------
var gTestfile = 'uc-005.js';
var UBound = 0;
var BUGNUMBER = 58274;
var summary = 'Testing identifiers with double-byte names';
var status = '';
var statusitems = [];
var actual = '';
var actualvalues = [];
var expect= '';
var expectedvalues = [];
/*
* Define a function that uses double-byte identifiers in
* "every possible way"
*
* Then recover each double-byte identifier via f.toString().
* To make this easier, put a 'Z' token before every one.
*
* Our eval string will be:
*
* sEval = "function Z\u02b1(Z\u02b2, b) {
* try { Z\u02b3 : var Z\u02b4 = Z\u02b1; }
* catch (Z\u02b5) { for (var Z\u02b6 in Z\u02b5)
* {for (1; 1<0; Z\u02b7++) {new Array()[Z\u02b6] = 1;} };} }";
*
* It will be helpful to build this string in stages:
*/
var s0 = 'function Z';
var s1 = '\u02b1(Z';
var s2 = '\u02b2, b) {try { Z';
var s3 = '\u02b3 : var Z';
var s4 = '\u02b4 = Z';
var s5 = '\u02b1; } catch (Z'
var s6 = '\u02b5) { for (var Z';
var s7 = '\u02b6 in Z';
var s8 = '\u02b5){for (1; 1<0; Z';
var s9 = '\u02b7++) {new Array()[Z';
var s10 = '\u02b6] = 1;} };} }';
/*
* Concatenate these and eval() to create the function Z\u02b1
*/
var sEval = s0 + s1 + s2 + s3 + s4 + s5 + s6 + s7 + s8 + s9 + s10;
eval(sEval);
/*
* Recover all the double-byte identifiers via Z\u02b1.toString().
* We'll recover the 1st one as arrID[1], the 2nd one as arrID[2],
* and so on ...
*/
var arrID = getIdentifiers(Z\u02b1);
/*
* Now check that we got back what we put in -
*/
status = inSection(1);
actual = arrID[1];
expect = s1.charAt(0);
addThis();
status = inSection(2);
actual = arrID[2];
expect = s2.charAt(0);
addThis();
status = inSection(3);
actual = arrID[3];
expect = s3.charAt(0);
addThis();
status = inSection(4);
actual = arrID[4];
expect = s4.charAt(0);
addThis();
status = inSection(5);
actual = arrID[5];
expect = s5.charAt(0);
addThis();
status = inSection(6);
actual = arrID[6];
expect = s6.charAt(0);
addThis();
status = inSection(7);
actual = arrID[7];
expect = s7.charAt(0);
addThis();
status = inSection(8);
actual = arrID[8];
expect = s8.charAt(0);
addThis();
status = inSection(9);
actual = arrID[9];
expect = s9.charAt(0);
addThis();
status = inSection(10);
actual = arrID[10];
expect = s10.charAt(0);
addThis();
//-----------------------------------------------------------------------------
test();
//-----------------------------------------------------------------------------
/*
* Goal: recover the double-byte identifiers from f.toString()
* by getting the very next character after each 'Z' token.
*
* The return value will be an array |arr| indexed such that
* |arr[1]| is the 1st identifier, |arr[2]| the 2nd, and so on.
*
* Note, however, f.toString() is implementation-independent.
* For example, it may begin with '\nfunction' instead of 'function'.
*
* Rhino uses a Unicode representation for f.toString(); whereas
* SpiderMonkey uses an ASCII representation, putting escape sequences
* for non-ASCII characters. For example, if a function is called f\u02B1,
* then in Rhino the toString() method will present a 2-character Unicode
* string for its name, whereas SpiderMonkey will present a 7-character
* ASCII string for its name: the string literal 'f\u02B1'.
*
* So we force the lexer to condense the string before we use it.
* This will give uniform results in Rhino and SpiderMonkey.
*/
function getIdentifiers(f)
{
var str = condenseStr(f.toString());
var arr = str.split('Z');
/*
* The identifiers are the 1st char of each split substring
* EXCEPT the first one, which is just ('\n' +) 'function '.
*
* Thus note the 1st identifier will be stored in |arr[1]|,
* the 2nd one in |arr[2]|, etc., making the indexing easy -
*/
for (i in arr)
arr[i] = arr[i].charAt(0);
return arr;
}
/*
* This function is the opposite of a functions like escape(), which take
* Unicode characters and return escape sequences for them. Here, we force
* the lexer to turn escape sequences back into single characters.
*
* Note we can't simply do |eval(str)|, since in practice |str| will be an
* identifier somewhere in the program (e.g. a function name); thus |eval(str)|
* would return the object that the identifier represents: not what we want.
*
* So we surround |str| lexicographically with quotes to force the lexer to
* evaluate it as a string. Have to strip out any linefeeds first, however -
*/
function condenseStr(str)
{
/*
* You won't be able to do the next step if |str| has
* any carriage returns or linefeeds in it. For example:
*
* js> eval("'" + '\nHello' + "'");
* 1: SyntaxError: unterminated string literal:
* 1: '
* 1: ^
*
* So replace them with the empty string -
*/
str = str.replace(/[\r\n]/g, '')
return eval("'" + str + "'")
}
function addThis()
{
statusitems[UBound] = status;
actualvalues[UBound] = actual;
expectedvalues[UBound] = expect;
UBound++;
}
function test()
{
enterFunc('test');
printBugNumber(BUGNUMBER);
printStatus(summary);
for (var i=0; i<UBound; i++)
{
reportCompare(expectedvalues[i], actualvalues[i], statusitems[i]);
}
exitFunc ('test');
}