gecko/js/tests/ecma/Date/15.9.4.2.js

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is Mozilla Communicator client code, released
 * March 31, 1998.
 *
 * The Initial Developer of the Original Code is
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 1998
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

gTestfile = '15.9.4.2.js';

/**
   File Name:          15.9.4.2.js
   ECMA Section:       15.9.4.2 Date.parse()
   Description:        The parse() function applies the to ToString() operator
   to its argument and interprets the resulting string as
   a date.  It returns a number, the UTC time value
   corresponding to the date.

   The string may be interpreted as a local time, a UTC
   time, or a time in some other time zone, depending on
   the contents of the string.

   (need to test strings containing stuff with the time
   zone specified, and verify that parse() returns the
   correct GMT time)

   so for any Date object x, all of these things should
   be equal:

   value                       tested in function:
   x.valueOf()                 test_value()
   Date.parse(x.toString())    test_tostring()
   Date.parse(x.toGMTString()) test_togmt()

   Date.parse(x.toLocaleString()) is not required to
   produce the same number value as the preceeding three
   expressions.  in general the value produced by
   Date.parse is implementation dependent when given any
   string value that could not be produced in that
   implementation by the toString or toGMTString method.

   value                           tested in function:
   Date.parse( x.toLocaleString()) test_tolocale()

   Author:             christine@netscape.com
   Date:               10 july 1997

*/

var VERSION = "ECMA_1";
startTest();
var SECTION = "15.9.4.2";
var TITLE   = "Date.parse()";

var TIME        = 0;
var UTC_YEAR    = 1;
var UTC_MONTH   = 2;
var UTC_DATE    = 3;
var UTC_DAY     = 4;
var UTC_HOURS   = 5;
var UTC_MINUTES = 6;
var UTC_SECONDS = 7;
var UTC_MS      = 8;

var YEAR        = 9;
var MONTH       = 10;
var DATE        = 11;
var DAY         = 12;
var HOURS       = 13;
var MINUTES     = 14;
var SECONDS     = 15;
var MS          = 16;
var TYPEOF  = "object";

//  for TCMS, the gTestcases array must be global.
writeHeaderToLog("15.9.4.2 Date.parse()" );

// Dates around 1970

addNewTestCase( new Date(0),
		"new Date(0)",
		[0,1970,0,1,4,0,0,0,0,1969,11,31,3,16,0,0,0] );

addNewTestCase( new Date(-1),
		"new Date(-1)",
		[-1,1969,11,31,3,23,59,59,999,1969,11,31,3,15,59,59,999] );
addNewTestCase( new Date(28799999),
		"new Date(28799999)",
		[28799999,1970,0,1,4,7,59,59,999,1969,11,31,3,23,59,59,999] );
addNewTestCase( new Date(28800000),
		"new Date(28800000)",
		[28800000,1970,0,1,4,8,0,0,0,1970,0,1,4,0,0,0,0] );

// Dates around 2000

addNewTestCase( new Date(946684799999),
		"new Date(946684799999)",
		[946684799999,1999,11,31,5,23,59,59,999,1999,11,31,5,15,59,59,999] );
addNewTestCase( new Date(946713599999),
		"new Date(946713599999)",
		[946713599999,2000,0,1,6,7,59,59,999,1999,11,31,5,23,59,59,999] );
addNewTestCase( new Date(946684800000),
		"new Date(946684800000)",
		[946684800000,2000,0,1,6,0,0,0,0,1999,11,31,5, 16,0,0,0] );
addNewTestCase( new Date(946713600000),
		"new Date(946713600000)",
		[946713600000,2000,0,1,6,8,0,0,0,2000,0,1,6,0,0,0,0] );

// Dates around 1900

addNewTestCase( new Date(-2208988800000),
		"new Date(-2208988800000)",
		[-2208988800000,1900,0,1,1,0,0,0,0,1899,11,31,0,16,0,0,0] );

addNewTestCase( new Date(-2208988800001),
		"new Date(-2208988800001)",
		[-2208988800001,1899,11,31,0,23,59,59,999,1899,11,31,0,15,59,59,999] );

addNewTestCase( new Date(-2208960000001),
		"new Date(-2208960000001)",
		[-2208960000001,1900,0,1,1,7,59,59,0,1899,11,31,0,23,59,59,999] );
addNewTestCase( new Date(-2208960000000),
		"new Date(-2208960000000)",
		[-2208960000000,1900,0,1,1,8,0,0,0,1900,0,1,1,0,0,0,0] );
addNewTestCase( new Date(-2208959999999),
		"new Date(-2208959999999)",
		[-2208959999999,1900,0,1,1,8,0,0,1,1900,0,1,1,0,0,0,1] );

// Dates around Feb 29, 2000

var PST_FEB_29_2000 = UTC_FEB_29_2000 + 8*msPerHour;

addNewTestCase( new Date(UTC_FEB_29_2000),
		"new Date(" + UTC_FEB_29_2000 +")",
		[UTC_FEB_29_2000,2000,0,1,6,0,0,0,0,1999,11,31,5,16,0,0,0] );
addNewTestCase( new Date(PST_FEB_29_2000),
		"new Date(" + PST_FEB_29_2000 +")",
		[PST_FEB_29_2000,2000,0,1,6,8.0,0,0,2000,0,1,6,0,0,0,0]);

// Dates around Jan 1 2005

var PST_JAN_1_2005 = UTC_JAN_1_2005 + 8*msPerHour;

addNewTestCase( new Date(UTC_JAN_1_2005),
		"new Date("+ UTC_JAN_1_2005 +")",
		[UTC_JAN_1_2005,2005,0,1,6,0,0,0,0,2004,11,31,5,16,0,0,0] );
addNewTestCase( new Date(PST_JAN_1_2005),
		"new Date("+ PST_JAN_1_2005 +")",
		[PST_JAN_1_2005,2005,0,1,6,8,0,0,0,2005,0,1,6,0,0,0,0] );


test();

function addNewTestCase( DateCase, DateString, ResultArray ) {
  DateCase = DateCase;

  new TestCase( SECTION, DateString+".getTime()", ResultArray[TIME],       DateCase.getTime() );
  new TestCase( SECTION, DateString+".valueOf()", ResultArray[TIME],       DateCase.valueOf() );
  new TestCase( SECTION, "Date.parse(" + DateCase.toString() +")",    Math.floor(ResultArray[TIME]/1000)*1000,  Date.parse(DateCase.toString()) );
  new TestCase( SECTION, "Date.parse(" + DateCase.toGMTString() +")", Math.floor(ResultArray[TIME]/1000)*1000,  Date.parse(DateCase.toGMTString()) );
}