gecko/js/tests/test.sh

529 lines
17 KiB
Bash
Executable File

#!/bin/bash -e
# -*- Mode: Shell-script; tab-width: 4; indent-tabs-mode: nil; -*-
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is Mozilla JavaScript Testing Utilities
#
# The Initial Developer of the Original Code is
# Mozilla Corporation.
# Portions created by the Initial Developer are Copyright (C) 2007
# the Initial Developer. All Rights Reserved.
#
# Contributor(s): Bob Clary <bclary@bclary.com>
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
if [[ -z "$TEST_DIR" ]]; then
cat <<EOF
`basename $0`: error
TEST_DIR, the location of the Sisyphus framework,
is required to be set prior to calling this script.
EOF
exit 2
fi
if [[ ! -e $TEST_DIR/bin/library.sh ]]; then
echo "TEST_DIR=$TEST_DIR"
echo ""
echo "This script requires the Sisyphus testing framework. Please "
echo "cvs check out the Sisyphys framework from mozilla/testing/sisyphus"
echo "and set the environment variable TEST_DIR to the directory where it"
echo "located."
echo ""
exit 2
fi
source $TEST_DIR/bin/library.sh
TEST_JSDIR=${TEST_JSDIR:-$TEST_DIR/tests/mozilla.org/js}
TEST_JSSHELL_TIMEOUT=${TEST_JSSHELL_TIMEOUT:-480}
TEST_JSEACH_TIMEOUT=${TEST_JSEACH_TIMEOUT:-485}
TEST_JSEACH_PAGE_TIMEOUT=${TEST_JSEACH_PAGE_TIMEOUT:-480}
TEST_JSALL_TIMEOUT=${TEST_JSALL_TIMEOUT:-21600}
TEST_WWW_JS=`echo $TEST_JSDIR|sed "s|$TEST_DIR||"`
#
# options processing
#
usage()
{
cat <<EOF
usage: test.sh -p product -b branch -T buildtype -x executablepath -N profilename \\
[-X excludetests] [-I includetests] [-c] [-t] [-F] [-d datafiles]
variable description
=============== ============================================================
-p product required. firefox|thunderbird|js|fennec
-b branch required. one of 1.8.0 1.8.1 1.9.0 1.9.1 1.9.2
-s jsshellsourcepath required for shell. path to js shell source directory mozilla/js/src
-T buildtype required. one of opt debug
-x executablepath required for browser. directory-tree containing executable 'product'
-N profilename required for browser. profile name
-X excludetests optional. By default the test will exclude the
tests listed in spidermonkey-n-\$branch.tests,
performance-\$branch.tests. excludetests is a list of either
individual tests, manifest files or sub-directories which
will override the default exclusion list.
-I includetests optional. By default the test will include the
JavaScript tests appropriate for the branch. includetests is a
list of either individual tests, manifest files or
sub-directories which will override the default inclusion
list.
-c optional. By default the test will exclude tests
which crash on this branch, test type, build type and
operating system. -c will include tests which crash.
Typically this should only be used in combination with -R.
This has no effect on shell based tests which execute crash
tests regardless.
-t optional. By default the test will exclude tests
which time out on this branch, test type, build type and
operating system. -t will include tests which timeout.
-J jsoptions optional. Set JavaScript options:
-Z n Set gczeal to n. Currently, only valid for
debug builds of Gecko 1.8.1.15, 1.9.0 and later.
-z optional. use split objects in the shell.
-j optional. use JIT in the shell. Only available on 1.9.1 and later
-F optional. Just generate file lists without running any tests.
-d datafiles optional. one or more filenames of files containing
environment variable definitions to be included.
note that the environment variables should have the same
names as in the "variable" column.
if an argument contains more than one value, it must be quoted.
EOF
exit 2
}
while getopts "p:b:s:T:x:N:d:X:I:J:RctF" optname
do
case $optname in
p)
product=$OPTARG;;
b)
branch=$OPTARG;;
T)
buildtype=$OPTARG;;
s)
jsshellsourcepath=$OPTARG;;
N)
profilename=$OPTARG;;
x)
executablepath=$OPTARG;;
X)
excludetests=$OPTARG;;
I)
includetests=$OPTARG;;
c)
crashes=1;;
t)
timeouts=1;;
F)
filesonly=1;;
J)
javascriptoptions=$OPTARG
;;
d) datafiles=$OPTARG;;
esac
done
if [[ -n "$javascriptoptions" ]]; then
unset OPTIND
while getopts "Z:jz" optname $javascriptoptions; do
case $optname in
Z)
gczealshell="-Z $OPTARG"
gczealbrowser=";gczeal=$OPTARG"
;;
z)
splitobjects="-z"
;;
j)
jitshell="-j"
jitbrowser=";jit"
;;
esac
done
fi
# include environment variables
if [[ -n "$datafiles" ]]; then
for datafile in $datafiles; do
source $datafile
done
fi
if [[ -n "$gczeal" && "$buildtype" != "debug" ]]; then
error "gczeal is supported for buildtype debug and not $buildtype"
fi
dumpvars product branch buildtype jsshellsourcepath profilename executablepath excludetests includetests crashes timeouts filesonly javascriptoptions datafiles | sed "s|^|arguments: |"
pushd $TEST_JSDIR
case $product in
js)
if [[ -z "$branch" || -z "$buildtype" || -z "$jsshellsourcepath" ]]; then
usage
fi
source config.sh
testtype=shell
executable="$jsshellsourcepath/$JS_OBJDIR/js$EXE_EXT"
;;
firefox|thunderbird|fennec)
if [[ -z "$branch" || -z "$buildtype" || -z "$executablepath" || -z "$profilename" ]]; then
usage
fi
testtype=browser
executable=`get_executable $product $branch $executablepath`
;;
*)
echo "Unknown product: $product"
usage
;;
esac
function shellfileversion()
{
local jsfile=$1
local version
case $jsfile in
ecma/*)
version=150;;
ecma_2/*)
version=150;;
ecma_3/*)
version=150;;
ecma_3_1/*)
version=180;;
js1_1/*)
version=150;;
js1_2/*)
version=150;;
js1_3/*)
version=150;;
js1_4/*)
version=150;;
js1_5/*)
version=150;;
js1_6/*)
version=160;;
js1_7/*)
version=170;;
js1_8/*)
version=180;;
js1_8_1/*)
version=180;;
js1_9/*)
version=190;;
js2_0/*)
version=200;;
*)
version=150;;
esac
echo $version
}
function browserfileversion()
{
local jsfile=$1
local version
case $jsfile in
ecma/*)
version=1.5;;
ecma_2/*)
version=1.5;;
ecma_3/*)
version=1.5;;
ecma_3_1/*)
version=1.8;;
js1_1/*)
version=1.1;;
js1_2/*)
version=1.5;;
js1_3/*)
version=1.5;;
js1_4/*)
version=1.5;;
js1_5/*)
version=1.5;;
js1_6/*)
version=1.6;;
js1_7/*)
version=1.7;;
js1_8/*)
version=1.8;;
js1_8_1/*)
version=1.8;;
js1_9/*)
version=1.9;;
js2_0/*)
version=2.0;;
*)
version=1.5;;
esac
echo $version
}
rm -f finished-$branch-$testtype-$buildtype
if ! make failures.txt; then
error "during make failures.txt" $LINENO
fi
includetestsfile="included-$branch-$testtype-$buildtype.tests"
rm -f $includetestsfile
touch $includetestsfile
if [[ -z "$includetests" ]]; then
# by default include tests appropriate for the branch
includetests="e4x ecma ecma_2 ecma_3 js1_1 js1_2 js1_3 js1_4 js1_5 js1_6"
case "$branch" in
1.8.0)
;;
1.8.1)
includetests="$includetests js1_7"
;;
1.9.0)
includetests="$includetests js1_7 js1_8"
;;
1.9.1)
includetests="$includetests js1_7 js1_8 ecma_3_1 js1_8_1"
;;
1.9.2)
includetests="$includetests js1_7 js1_8 ecma_3_1 js1_8_1"
;;
esac
fi
for i in $includetests; do
if [[ -f "$i" ]]; then
echo "# including $i" >> $includetestsfile
if echo $i | grep -q '\.js$'; then
echo $i >> $includetestsfile
else
cat $i >> $includetestsfile
fi
elif [[ -d "$i" ]]; then
find $i -name '*.js' -print | egrep -v '(shell|browser|template|jsref|userhook.*|\.#.*)\.js' | sed 's/^\.\///' | sort >> $includetestsfile
fi
done
excludetestsfile="excluded-$branch-$testtype-$buildtype.tests"
rm -f $excludetestsfile
touch $excludetestsfile
if [[ -z "$excludetests" ]]; then
excludetests="spidermonkey-n-$branch.tests performance-$branch.tests"
fi
for e in $excludetests; do
if [[ -f "$e" ]]; then
echo "# excluding $e" >> $excludetestsfile
if echo $e | grep -q '\.js$'; then
echo $e >> $excludetestsfile
else
cat $e >> $excludetestsfile
fi
elif [[ -d "$e" ]]; then
find $e -name '*.js' -print | egrep -v '(shell|browser|template|jsref|userhook.*|\.#.*)\.js' | sed 's/^\.\///' | sort >> $excludetestsfile
fi
done
if [[ -z "$TEST_MOZILLA_HG" ]]; then
repo=CVS
else
repo=`basename $TEST_MOZILLA_HG`
fi
debug "repo=$repo"
pattern="TEST_BRANCH=($branch|[.][*]), TEST_REPO=($repo|[.][*]), TEST_BUILDTYPE=($buildtype|[.][*]), TEST_TYPE=($testtype|[.][*]), TEST_OS=($OSID|[.][*]), TEST_KERNEL=($TEST_KERNEL|[.][*]), TEST_PROCESSORTYPE=($TEST_PROCESSORTYPE|[.][*]), TEST_MEMORY=($TEST_MEMORY|[.][*]),"
if [[ -z "$timeouts" ]]; then
echo "# exclude tests that time out" >> $excludetestsfile
egrep "$pattern .*TEST_EXITSTATUS=[^,]*TIMED OUT[^,]*," failures.txt | \
sed 's/.*TEST_ID=\([^,]*\),.*/\1/' | sort -u >> $excludetestsfile
fi
if [[ -z "$crashes" ]]; then
echo "# exclude tests that crash" >> $excludetestsfile
egrep "$pattern .*TEST_EXITSTATUS=[^,]*(CRASHED|ABNORMAL)[^,]*" failures.txt | \
sed 's/.*TEST_ID=\([^,]*\),.*/\1/' | sort -u >> $excludetestsfile
fi
cat $includetestsfile | sed 's|^|include: |'
cat $excludetestsfile | sed 's|^|exclude: |'
case $testtype in
shell)
echo "JavaScriptTest: Begin Run"
cat $includetestsfile | while read jsfile
do
if echo $jsfile | grep -q '^#'; then
continue
fi
if ! grep -q $jsfile $excludetestsfile; then
version=`shellfileversion $jsfile`
subsuitetestdir=`dirname $jsfile`
suitetestdir=`dirname $subsuitetestdir`
echo "JavaScriptTest: Begin Test $jsfile"
if [[ -z "$NARCISSUS" ]]; then
if eval $TIMECOMMAND timed_run.py $TEST_JSEACH_TIMEOUT \"$jsfile\" \
$EXECUTABLE_DRIVER \
$executable -v $version \
-S 524288 \
$gczealshell \
$splitobjects \
$jitshell \
-f ./shell.js \
-f $suitetestdir/shell.js \
-f $subsuitetestdir/shell.js \
-f ./$jsfile \
-f ./js-test-driver-end.js; then
true
else
rc=$?
fi
else
if eval $TIMECOMMAND timed_run.py $TEST_JSEACH_TIMEOUT \"$jsfile\" \
$EXECUTABLE_DRIVER \
$executable -v $version \
-S 524288 \
$gczealshell \
$splitobjects \
$jitshell \
-f $NARCISSUS \
-e "evaluate\(\'load\(\\\"./shell.js\\\"\)\'\)" \
-e "evaluate\(\'load\(\\\"$suitetestdir/shell.js\\\"\)\'\)" \
-e "evaluate\(\'load\(\\\"$subsuitetestdir/shell.js\\\"\)\'\)" \
-e "evaluate\(\'load\(\\\"./$jsfile\\\"\)\'\)" \
-e "evaluate\(\'load\(\\\"./js-test-driver-end.js\\\"\)\'\)"; then
true
else
rc=$?
fi
fi
if [[ $rc == 99 ]]; then
# note that this loop is executing in a sub-process
# error will terminate the sub-process but will transfer
# control to the next statement following the loop which
# in this case is the "End Run" output which incorrectly
# labels the test run as completed.
error "User Interrupt"
fi
echo "JavaScriptTest: End Test $jsfile"
fi
done
rc=$?
if [[ $rc != 0 ]]; then
error ""
fi
echo "JavaScriptTest: End Run"
;;
browser)
urllist="urllist-$branch-$testtype-$buildtype.tests"
urlhtml="urllist-$branch-$testtype-$buildtype.html"
rm -f $urllist $urlhtml
cat > $urlhtml <<EOF
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>JavaScript Tests</title>
</head>
<body>
<ul>
EOF
cat $includetestsfile | while read jsfile
do
if echo $jsfile | grep -q '^#'; then
continue
fi
if ! grep -q $jsfile $excludetestsfile; then
version=";version=`browserfileversion $jsfile`"
echo "http://$TEST_HTTP/$TEST_WWW_JS/js-test-driver-standards.html?test=$jsfile;language=type;text/javascript$version$gczealbrowser$jitbrowser" >> $urllist
echo "<li><a href='http://$TEST_HTTP/$TEST_WWW_JS/js-test-driver-standards.html?test=$jsfile;language=type;text/javascript$version$gczealbrowser$jitbrowser'>$jsfile</a></li>" >> $urlhtml
fi
done
cat >> $urlhtml <<EOF
</ul>
</body>
</html>
EOF
chmod a+r $urlhtml
if [[ -z "$filesonly" ]]; then
echo "JavaScriptTest: Begin Run"
cat "$urllist" | while read url;
do
edit-talkback.sh -p "$product" -b "$branch" -x "$executablepath" -i "$url"
jsfile=`echo $url | sed "s|http://$TEST_HTTP/$TEST_WWW_JS/js-test-driver-standards.html?test=\([^;]*\);.*|\1|"`
echo "JavaScriptTest: Begin Test $jsfile"
if eval $TIMECOMMAND timed_run.py $TEST_JSEACH_TIMEOUT \"$jsfile\" \
$EXECUTABLE_DRIVER \
\"$executable\" -P \"$profilename\" \
-spider -start -quit \
-uri \"$url\" \
-depth 0 -timeout \"$TEST_JSEACH_PAGE_TIMEOUT\" \
-hook \"http://$TEST_HTTP/$TEST_WWW_JS/userhookeach.js\"; then
true
else
rc=$?
fi
if [[ $rc == 99 ]]; then
error "User Interrupt"
fi
echo "JavaScriptTest: End Test $jsfile"
done
echo "JavaScriptTest: End Run"
fi
;;
*)
;;
esac
popd