gecko/media/libpng/arm/arm_init.c
2013-09-26 14:39:44 -04:00

222 lines
6.3 KiB
C

/* arm_init.c - NEON optimised filter functions
*
* Copyright (c) 2013 Glenn Randers-Pehrson
* Written by Mans Rullgard, 2011.
* Last changed in libpng 1.6.5 [September 16, 2013]
*
* This code is released under the libpng license.
* For conditions of distribution and use, see the disclaimer
* and license in png.h
*/
/* Below, after checking __linux__, various non-C90 POSIX 1003.1 functions are
* called.
*/
#define _POSIX_SOURCE 1
#include "../pngpriv.h"
#ifdef PNG_READ_SUPPORTED
#if PNG_ARM_NEON_OPT > 0
#ifdef PNG_ARM_NEON_CHECK_SUPPORTED /* Do run-time checks */
#include <signal.h> /* for sig_atomic_t */
#ifdef __ANDROID__
/* Linux provides access to information about CPU capabilites via
* /proc/self/auxv, however Android blocks this while still claiming to be
* Linux. The Andoid NDK, however, provides appropriate support.
*
* Documentation: http://www.kandroid.org/ndk/docs/CPU-ARM-NEON.html
*/
#include <cpu-features.h>
static int
png_have_neon(png_structp png_ptr)
{
/* This is a whole lot easier than the mess below, however it is probably
* implemented as below, therefore it is better to cache the result (these
* function calls may be slow!)
*/
PNG_UNUSED(png_ptr)
return android_getCpuFamily() == ANDROID_CPU_FAMILY_ARM &&
(android_getCpuFeatures() & ANDROID_CPU_ARM_FEATURE_NEON) != 0;
}
#elif defined(__linux__)
/* The generic __linux__ implementation requires reading /proc/self/auxv and
* looking at each element for one that records NEON capabilities.
*/
#include <unistd.h> /* for POSIX 1003.1 */
#include <errno.h> /* for EINTR */
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <elf.h>
#include <asm/hwcap.h>
/* A read call may be interrupted, in which case it returns -1 and sets errno to
* EINTR if nothing was done, otherwise (if something was done) a partial read
* may result.
*/
static size_t
safe_read(png_structp png_ptr, int fd, void *buffer_in, size_t nbytes)
{
size_t ntotal = 0;
char *buffer = png_voidcast(char*, buffer_in);
while (nbytes > 0)
{
unsigned int nread;
int iread;
/* Passing nread > INT_MAX to read is implementation defined in POSIX
* 1003.1, therefore despite the unsigned argument portable code must
* limit the value to INT_MAX!
*/
if (nbytes > INT_MAX)
nread = INT_MAX;
else
nread = (unsigned int)/*SAFE*/nbytes;
iread = read(fd, buffer, nread);
if (iread == -1)
{
/* This is the devil in the details, a read can terminate early with 0
* bytes read because of EINTR, yet it still returns -1 otherwise end
* of file cannot be distinguished.
*/
if (errno != EINTR)
{
png_warning(png_ptr, "/proc read failed");
return 0; /* I.e. a permanent failure */
}
}
else if (iread < 0)
{
/* Not a valid 'read' result: */
png_warning(png_ptr, "OS /proc read bug");
return 0;
}
else if (iread > 0)
{
/* Continue reading until a permanent failure, or EOF */
buffer += iread;
nbytes -= (unsigned int)/*SAFE*/iread;
ntotal += (unsigned int)/*SAFE*/iread;
}
else
return ntotal;
}
return ntotal; /* nbytes == 0 */
}
static int
png_have_neon(png_structp png_ptr)
{
int fd = open("/proc/self/auxv", O_RDONLY);
Elf32_auxv_t aux;
/* Failsafe: failure to open means no NEON */
if (fd == -1)
{
png_warning(png_ptr, "/proc/self/auxv open failed");
return 0;
}
while (safe_read(png_ptr, fd, &aux, sizeof aux) == sizeof aux)
{
if (aux.a_type == AT_HWCAP && (aux.a_un.a_val & HWCAP_NEON) != 0)
{
close(fd);
return 1;
}
}
close(fd);
return 0;
}
#else
/* We don't know how to do a run-time check on this system */
# error "no support for run-time ARM NEON checks"
#endif /* OS checks */
#endif /* PNG_ARM_NEON_CHECK_SUPPORTED */
#ifndef PNG_ALIGNED_MEMORY_SUPPORTED
# error "ALIGNED_MEMORY is required; set: -DPNG_ALIGNED_MEMORY_SUPPORTED"
#endif
void
png_init_filter_functions_neon(png_structp pp, unsigned int bpp)
{
#ifdef PNG_ARM_NEON_API_SUPPORTED
switch ((pp->options >> PNG_ARM_NEON) & 3)
{
case PNG_OPTION_UNSET:
/* Allow the run-time check to execute if it has been enabled -
* thus both API and CHECK can be turned on. If it isn't supported
* this case will fall through to the 'default' below, which just
* returns.
*/
#endif /* PNG_ARM_NEON_API_SUPPORTED */
#ifdef PNG_ARM_NEON_CHECK_SUPPORTED
{
static volatile sig_atomic_t no_neon = -1; /* not checked */
if (no_neon < 0)
no_neon = !png_have_neon(pp);
if (no_neon)
return;
}
#ifdef PNG_ARM_NEON_API_SUPPORTED
break;
#endif
#endif /* PNG_ARM_NEON_CHECK_SUPPORTED */
#ifdef PNG_ARM_NEON_API_SUPPORTED
case PNG_OPTION_ON:
/* Option turned on */
break;
default: /* OFF or INVALID */
return;
}
#endif
/* IMPORTANT: any new external functions used here must be declared using
* PNG_INTERNAL_FUNCTION in ../pngpriv.h. This is required so that the
* 'prefix' option to configure works:
*
* ./configure --with-libpng-prefix=foobar_
*
* Verify you have got this right by running the above command, doing a build
* and examining pngprefix.h; it must contain a #define for every external
* function you add. (Notice that this happens automatically for the
* initialization function.)
*/
pp->read_filter[PNG_FILTER_VALUE_UP-1] = png_read_filter_row_up_neon;
if (bpp == 3)
{
pp->read_filter[PNG_FILTER_VALUE_SUB-1] = png_read_filter_row_sub3_neon;
pp->read_filter[PNG_FILTER_VALUE_AVG-1] = png_read_filter_row_avg3_neon;
pp->read_filter[PNG_FILTER_VALUE_PAETH-1] =
png_read_filter_row_paeth3_neon;
}
else if (bpp == 4)
{
pp->read_filter[PNG_FILTER_VALUE_SUB-1] = png_read_filter_row_sub4_neon;
pp->read_filter[PNG_FILTER_VALUE_AVG-1] = png_read_filter_row_avg4_neon;
pp->read_filter[PNG_FILTER_VALUE_PAETH-1] =
png_read_filter_row_paeth4_neon;
}
}
#endif /* PNG_ARM_NEON_OPT > 0 */
#endif /* PNG_READ_SUPPORTED */