gecko/nsprpub/pr/tests/y2ktmo.c
2008-06-06 08:36:51 -04:00

547 lines
17 KiB
C

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Netscape Portable Runtime (NSPR).
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1999-2000
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/*
* Test: y2ktmo
*
* Description:
* This test tests the interval time facilities in NSPR for Y2K
* compliance. All the functions that take a timeout argument
* are tested: PR_Sleep, socket I/O (PR_Accept is taken as a
* representative), PR_Poll, PR_WaitCondVar, PR_Wait, and
* PR_CWait. A thread of each thread scope (local, global, and
* global bound) is created to call each of these functions.
* The test should be started at the specified number of seconds
* (called the lead time) before a Y2K rollover test date. The
* timeout values for these threads will span over the rollover
* date by at least the specified number of seconds. For
* example, if the lead time is 5 seconds, the test should
* be started at time (D - 5), where D is a rollover date, and
* the threads will time out at or after time (D + 5). The
* timeout values for the threads are spaced one second apart.
*
* When a thread times out, it calls PR_IntervalNow() to verify
* that it did wait for the specified time. In addition, it
* calls a platform-native function to verify the actual elapsed
* time again, to rule out the possibility that PR_IntervalNow()
* is broken. We allow the actual elapsed time to deviate from
* the specified timeout by a certain tolerance (in milliseconds).
*/
#include "nspr.h"
#include "plgetopt.h"
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#if defined(XP_UNIX)
#include <sys/time.h> /* for gettimeofday */
#endif
#if defined(WIN32)
#include <sys/types.h>
#include <sys/timeb.h> /* for _ftime */
#endif
#define DEFAULT_LEAD_TIME_SECS 5
#define DEFAULT_TOLERANCE_MSECS 500
static PRBool debug_mode = PR_FALSE;
static PRInt32 lead_time_secs = DEFAULT_LEAD_TIME_SECS;
static PRInt32 tolerance_msecs = DEFAULT_TOLERANCE_MSECS;
static PRIntervalTime start_time;
static PRIntervalTime tolerance;
#if defined(XP_UNIX)
static struct timeval start_time_tv;
#endif
#if defined(WIN32)
static struct _timeb start_time_tb;
#endif
static void SleepThread(void *arg)
{
PRIntervalTime timeout = (PRIntervalTime) arg;
PRIntervalTime elapsed;
#if defined(XP_UNIX) || defined(WIN32)
PRInt32 timeout_msecs = PR_IntervalToMilliseconds(timeout);
PRInt32 elapsed_msecs;
#endif
#if defined(XP_UNIX)
struct timeval end_time_tv;
#endif
#if defined(WIN32)
struct _timeb end_time_tb;
#endif
if (PR_Sleep(timeout) == PR_FAILURE) {
fprintf(stderr, "PR_Sleep failed\n");
exit(1);
}
elapsed = (PRIntervalTime)(PR_IntervalNow() - start_time);
if (elapsed + tolerance < timeout || elapsed > timeout + tolerance) {
fprintf(stderr, "timeout wrong\n");
exit(1);
}
#if defined(XP_UNIX)
gettimeofday(&end_time_tv, NULL);
elapsed_msecs = 1000*(end_time_tv.tv_sec - start_time_tv.tv_sec)
+ (end_time_tv.tv_usec - start_time_tv.tv_usec)/1000;
#endif
#if defined(WIN32)
_ftime(&end_time_tb);
elapsed_msecs = 1000*(end_time_tb.time - start_time_tb.time)
+ (end_time_tb.millitm - start_time_tb.millitm);
#endif
#if defined(XP_UNIX) || defined(WIN32)
if (elapsed_msecs + tolerance_msecs < timeout_msecs
|| elapsed_msecs > timeout_msecs + tolerance_msecs) {
fprintf(stderr, "timeout wrong\n");
exit(1);
}
#endif
if (debug_mode) {
fprintf(stderr, "Sleep thread (scope %d) done\n",
PR_GetThreadScope(PR_GetCurrentThread()));
}
}
static void AcceptThread(void *arg)
{
PRIntervalTime timeout = (PRIntervalTime) arg;
PRIntervalTime elapsed;
#if defined(XP_UNIX) || defined(WIN32)
PRInt32 timeout_msecs = PR_IntervalToMilliseconds(timeout);
PRInt32 elapsed_msecs;
#endif
#if defined(XP_UNIX)
struct timeval end_time_tv;
#endif
#if defined(WIN32)
struct _timeb end_time_tb;
#endif
PRFileDesc *sock;
PRNetAddr addr;
PRFileDesc *accepted;
sock = PR_NewTCPSocket();
if (sock == NULL) {
fprintf(stderr, "PR_NewTCPSocket failed\n");
exit(1);
}
memset(&addr, 0, sizeof(addr));
addr.inet.family = PR_AF_INET;
addr.inet.port = 0;
addr.inet.ip = PR_htonl(PR_INADDR_ANY);
if (PR_Bind(sock, &addr) == PR_FAILURE) {
fprintf(stderr, "PR_Bind failed\n");
exit(1);
}
if (PR_Listen(sock, 5) == PR_FAILURE) {
fprintf(stderr, "PR_Listen failed\n");
exit(1);
}
accepted = PR_Accept(sock, NULL, timeout);
if (accepted != NULL || PR_GetError() != PR_IO_TIMEOUT_ERROR) {
fprintf(stderr, "PR_Accept did not time out\n");
exit(1);
}
elapsed = (PRIntervalTime)(PR_IntervalNow() - start_time);
if (elapsed + tolerance < timeout || elapsed > timeout + tolerance) {
fprintf(stderr, "timeout wrong\n");
exit(1);
}
#if defined(XP_UNIX)
gettimeofday(&end_time_tv, NULL);
elapsed_msecs = 1000*(end_time_tv.tv_sec - start_time_tv.tv_sec)
+ (end_time_tv.tv_usec - start_time_tv.tv_usec)/1000;
#endif
#if defined(WIN32)
_ftime(&end_time_tb);
elapsed_msecs = 1000*(end_time_tb.time - start_time_tb.time)
+ (end_time_tb.millitm - start_time_tb.millitm);
#endif
#if defined(XP_UNIX) || defined(WIN32)
if (elapsed_msecs + tolerance_msecs < timeout_msecs
|| elapsed_msecs > timeout_msecs + tolerance_msecs) {
fprintf(stderr, "timeout wrong\n");
exit(1);
}
#endif
if (PR_Close(sock) == PR_FAILURE) {
fprintf(stderr, "PR_Close failed\n");
exit(1);
}
if (debug_mode) {
fprintf(stderr, "Accept thread (scope %d) done\n",
PR_GetThreadScope(PR_GetCurrentThread()));
}
}
static void PollThread(void *arg)
{
PRIntervalTime timeout = (PRIntervalTime) arg;
PRIntervalTime elapsed;
#if defined(XP_UNIX) || defined(WIN32)
PRInt32 timeout_msecs = PR_IntervalToMilliseconds(timeout);
PRInt32 elapsed_msecs;
#endif
#if defined(XP_UNIX)
struct timeval end_time_tv;
#endif
#if defined(WIN32)
struct _timeb end_time_tb;
#endif
PRFileDesc *sock;
PRNetAddr addr;
PRPollDesc pd;
PRIntn rv;
sock = PR_NewTCPSocket();
if (sock == NULL) {
fprintf(stderr, "PR_NewTCPSocket failed\n");
exit(1);
}
memset(&addr, 0, sizeof(addr));
addr.inet.family = PR_AF_INET;
addr.inet.port = 0;
addr.inet.ip = PR_htonl(PR_INADDR_ANY);
if (PR_Bind(sock, &addr) == PR_FAILURE) {
fprintf(stderr, "PR_Bind failed\n");
exit(1);
}
if (PR_Listen(sock, 5) == PR_FAILURE) {
fprintf(stderr, "PR_Listen failed\n");
exit(1);
}
pd.fd = sock;
pd.in_flags = PR_POLL_READ;
rv = PR_Poll(&pd, 1, timeout);
if (rv != 0) {
fprintf(stderr, "PR_Poll did not time out\n");
exit(1);
}
elapsed = (PRIntervalTime)(PR_IntervalNow() - start_time);
if (elapsed + tolerance < timeout || elapsed > timeout + tolerance) {
fprintf(stderr, "timeout wrong\n");
exit(1);
}
#if defined(XP_UNIX)
gettimeofday(&end_time_tv, NULL);
elapsed_msecs = 1000*(end_time_tv.tv_sec - start_time_tv.tv_sec)
+ (end_time_tv.tv_usec - start_time_tv.tv_usec)/1000;
#endif
#if defined(WIN32)
_ftime(&end_time_tb);
elapsed_msecs = 1000*(end_time_tb.time - start_time_tb.time)
+ (end_time_tb.millitm - start_time_tb.millitm);
#endif
#if defined(XP_UNIX) || defined(WIN32)
if (elapsed_msecs + tolerance_msecs < timeout_msecs
|| elapsed_msecs > timeout_msecs + tolerance_msecs) {
fprintf(stderr, "timeout wrong\n");
exit(1);
}
#endif
if (PR_Close(sock) == PR_FAILURE) {
fprintf(stderr, "PR_Close failed\n");
exit(1);
}
if (debug_mode) {
fprintf(stderr, "Poll thread (scope %d) done\n",
PR_GetThreadScope(PR_GetCurrentThread()));
}
}
static void WaitCondVarThread(void *arg)
{
PRIntervalTime timeout = (PRIntervalTime) arg;
PRIntervalTime elapsed;
#if defined(XP_UNIX) || defined(WIN32)
PRInt32 timeout_msecs = PR_IntervalToMilliseconds(timeout);
PRInt32 elapsed_msecs;
#endif
#if defined(XP_UNIX)
struct timeval end_time_tv;
#endif
#if defined(WIN32)
struct _timeb end_time_tb;
#endif
PRLock *ml;
PRCondVar *cv;
ml = PR_NewLock();
if (ml == NULL) {
fprintf(stderr, "PR_NewLock failed\n");
exit(1);
}
cv = PR_NewCondVar(ml);
if (cv == NULL) {
fprintf(stderr, "PR_NewCondVar failed\n");
exit(1);
}
PR_Lock(ml);
PR_WaitCondVar(cv, timeout);
PR_Unlock(ml);
elapsed = (PRIntervalTime)(PR_IntervalNow() - start_time);
if (elapsed + tolerance < timeout || elapsed > timeout + tolerance) {
fprintf(stderr, "timeout wrong\n");
exit(1);
}
#if defined(XP_UNIX)
gettimeofday(&end_time_tv, NULL);
elapsed_msecs = 1000*(end_time_tv.tv_sec - start_time_tv.tv_sec)
+ (end_time_tv.tv_usec - start_time_tv.tv_usec)/1000;
#endif
#if defined(WIN32)
_ftime(&end_time_tb);
elapsed_msecs = 1000*(end_time_tb.time - start_time_tb.time)
+ (end_time_tb.millitm - start_time_tb.millitm);
#endif
#if defined(XP_UNIX) || defined(WIN32)
if (elapsed_msecs + tolerance_msecs < timeout_msecs
|| elapsed_msecs > timeout_msecs + tolerance_msecs) {
fprintf(stderr, "timeout wrong\n");
exit(1);
}
#endif
PR_DestroyCondVar(cv);
PR_DestroyLock(ml);
if (debug_mode) {
fprintf(stderr, "wait cond var thread (scope %d) done\n",
PR_GetThreadScope(PR_GetCurrentThread()));
}
}
static void WaitMonitorThread(void *arg)
{
PRIntervalTime timeout = (PRIntervalTime) arg;
PRIntervalTime elapsed;
#if defined(XP_UNIX) || defined(WIN32)
PRInt32 timeout_msecs = PR_IntervalToMilliseconds(timeout);
PRInt32 elapsed_msecs;
#endif
#if defined(XP_UNIX)
struct timeval end_time_tv;
#endif
#if defined(WIN32)
struct _timeb end_time_tb;
#endif
PRMonitor *mon;
mon = PR_NewMonitor();
if (mon == NULL) {
fprintf(stderr, "PR_NewMonitor failed\n");
exit(1);
}
PR_EnterMonitor(mon);
PR_Wait(mon, timeout);
PR_ExitMonitor(mon);
elapsed = (PRIntervalTime)(PR_IntervalNow() - start_time);
if (elapsed + tolerance < timeout || elapsed > timeout + tolerance) {
fprintf(stderr, "timeout wrong\n");
exit(1);
}
#if defined(XP_UNIX)
gettimeofday(&end_time_tv, NULL);
elapsed_msecs = 1000*(end_time_tv.tv_sec - start_time_tv.tv_sec)
+ (end_time_tv.tv_usec - start_time_tv.tv_usec)/1000;
#endif
#if defined(WIN32)
_ftime(&end_time_tb);
elapsed_msecs = 1000*(end_time_tb.time - start_time_tb.time)
+ (end_time_tb.millitm - start_time_tb.millitm);
#endif
#if defined(XP_UNIX) || defined(WIN32)
if (elapsed_msecs + tolerance_msecs < timeout_msecs
|| elapsed_msecs > timeout_msecs + tolerance_msecs) {
fprintf(stderr, "timeout wrong\n");
exit(1);
}
#endif
PR_DestroyMonitor(mon);
if (debug_mode) {
fprintf(stderr, "wait monitor thread (scope %d) done\n",
PR_GetThreadScope(PR_GetCurrentThread()));
}
}
static void WaitCMonitorThread(void *arg)
{
PRIntervalTime timeout = (PRIntervalTime) arg;
PRIntervalTime elapsed;
#if defined(XP_UNIX) || defined(WIN32)
PRInt32 timeout_msecs = PR_IntervalToMilliseconds(timeout);
PRInt32 elapsed_msecs;
#endif
#if defined(XP_UNIX)
struct timeval end_time_tv;
#endif
#if defined(WIN32)
struct _timeb end_time_tb;
#endif
int dummy;
PR_CEnterMonitor(&dummy);
PR_CWait(&dummy, timeout);
PR_CExitMonitor(&dummy);
elapsed = (PRIntervalTime)(PR_IntervalNow() - start_time);
if (elapsed + tolerance < timeout || elapsed > timeout + tolerance) {
fprintf(stderr, "timeout wrong\n");
exit(1);
}
#if defined(XP_UNIX)
gettimeofday(&end_time_tv, NULL);
elapsed_msecs = 1000*(end_time_tv.tv_sec - start_time_tv.tv_sec)
+ (end_time_tv.tv_usec - start_time_tv.tv_usec)/1000;
#endif
#if defined(WIN32)
_ftime(&end_time_tb);
elapsed_msecs = 1000*(end_time_tb.time - start_time_tb.time)
+ (end_time_tb.millitm - start_time_tb.millitm);
#endif
#if defined(XP_UNIX) || defined(WIN32)
if (elapsed_msecs + tolerance_msecs < timeout_msecs
|| elapsed_msecs > timeout_msecs + tolerance_msecs) {
fprintf(stderr, "timeout wrong\n");
exit(1);
}
#endif
if (debug_mode) {
fprintf(stderr, "wait cached monitor thread (scope %d) done\n",
PR_GetThreadScope(PR_GetCurrentThread()));
}
}
typedef void (*NSPRThreadFunc)(void*);
static NSPRThreadFunc threadFuncs[] = {
SleepThread, AcceptThread, PollThread,
WaitCondVarThread, WaitMonitorThread, WaitCMonitorThread};
static PRThreadScope threadScopes[] = {
PR_LOCAL_THREAD, PR_GLOBAL_THREAD, PR_GLOBAL_BOUND_THREAD};
static void Help(void)
{
fprintf(stderr, "y2ktmo test program usage:\n");
fprintf(stderr, "\t-d debug mode (FALSE)\n");
fprintf(stderr, "\t-l <secs> lead time (%d)\n",
DEFAULT_LEAD_TIME_SECS);
fprintf(stderr, "\t-t <msecs> tolerance (%d)\n",
DEFAULT_TOLERANCE_MSECS);
fprintf(stderr, "\t-h this message\n");
} /* Help */
int main(int argc, char **argv)
{
PRThread **threads;
int num_thread_funcs = sizeof(threadFuncs)/sizeof(NSPRThreadFunc);
int num_thread_scopes = sizeof(threadScopes)/sizeof(PRThreadScope);
int i, j;
int idx;
PRInt32 secs;
PLOptStatus os;
PLOptState *opt = PL_CreateOptState(argc, argv, "dl:t:h");
while (PL_OPT_EOL != (os = PL_GetNextOpt(opt))) {
if (PL_OPT_BAD == os) continue;
switch (opt->option) {
case 'd': /* debug mode */
debug_mode = PR_TRUE;
break;
case 'l': /* lead time */
lead_time_secs = atoi(opt->value);
break;
case 't': /* tolerance */
tolerance_msecs = atoi(opt->value);
break;
case 'h':
default:
Help();
return 2;
}
}
PL_DestroyOptState(opt);
if (debug_mode) {
fprintf(stderr, "lead time: %d secs\n", lead_time_secs);
fprintf(stderr, "tolerance: %d msecs\n", tolerance_msecs);
}
start_time = PR_IntervalNow();
#if defined(XP_UNIX)
gettimeofday(&start_time_tv, NULL);
#endif
#if defined(WIN32)
_ftime(&start_time_tb);
#endif
tolerance = PR_MillisecondsToInterval(tolerance_msecs);
threads = PR_Malloc(
num_thread_scopes * num_thread_funcs * sizeof(PRThread*));
if (threads == NULL) {
fprintf(stderr, "PR_Malloc failed\n");
exit(1);
}
/* start to time out 5 seconds after a rollover date */
secs = lead_time_secs + 5;
idx = 0;
for (i = 0; i < num_thread_scopes; i++) {
for (j = 0; j < num_thread_funcs; j++) {
threads[idx] = PR_CreateThread(PR_USER_THREAD, threadFuncs[j],
(void*)PR_SecondsToInterval(secs), PR_PRIORITY_NORMAL,
threadScopes[i], PR_JOINABLE_THREAD, 0);
if (threads[idx] == NULL) {
fprintf(stderr, "PR_CreateThread failed\n");
exit(1);
}
secs++;
idx++;
}
}
for (idx = 0; idx < num_thread_scopes*num_thread_funcs; idx++) {
if (PR_JoinThread(threads[idx]) == PR_FAILURE) {
fprintf(stderr, "PR_JoinThread failed\n");
exit(1);
}
}
PR_Free(threads);
printf("PASS\n");
return 0;
}