gecko/js/tests/ecma/Expressions/11.2.1-1.js

273 lines
14 KiB
JavaScript

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is Mozilla Communicator client code, released
* March 31, 1998.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
gTestfile = '11.2.1-1.js';
/**
File Name: 11.2.1-1.js
ECMA Section: 11.2.1 Property Accessors
Description:
Properties are accessed by name, using either the dot notation:
MemberExpression . Identifier
CallExpression . Identifier
or the bracket notation: MemberExpression [ Expression ]
CallExpression [ Expression ]
The dot notation is explained by the following syntactic conversion:
MemberExpression . Identifier
is identical in its behavior to
MemberExpression [ <identifier-string> ]
and similarly
CallExpression . Identifier
is identical in its behavior to
CallExpression [ <identifier-string> ]
where <identifier-string> is a string literal containing the same sequence
of characters as the Identifier.
The production MemberExpression : MemberExpression [ Expression ] is
evaluated as follows:
1. Evaluate MemberExpression.
2. Call GetValue(Result(1)).
3. Evaluate Expression.
4. Call GetValue(Result(3)).
5. Call ToObject(Result(2)).
6. Call ToString(Result(4)).
7. Return a value of type Reference whose base object is Result(5) and
whose property name is Result(6).
The production CallExpression : CallExpression [ Expression ] is evaluated
in exactly the same manner, except that the contained CallExpression is
evaluated in step 1.
Author: christine@netscape.com
Date: 12 november 1997
*/
var SECTION = "11.2.1-1";
var VERSION = "ECMA_1";
startTest();
var TITLE = "Property Accessors";
writeHeaderToLog( SECTION + " "+TITLE );
// go through all Native Function objects, methods, and properties and get their typeof.
var PROPERTY = new Array();
var p = 0;
// properties and functions of the global object
PROPERTY[p++] = new Property( "this", "NaN", "number" );
PROPERTY[p++] = new Property( "this", "Infinity", "number" );
PROPERTY[p++] = new Property( "this", "eval", "function" );
PROPERTY[p++] = new Property( "this", "parseInt", "function" );
PROPERTY[p++] = new Property( "this", "parseFloat", "function" );
PROPERTY[p++] = new Property( "this", "escape", "function" );
PROPERTY[p++] = new Property( "this", "unescape", "function" );
PROPERTY[p++] = new Property( "this", "isNaN", "function" );
PROPERTY[p++] = new Property( "this", "isFinite", "function" );
PROPERTY[p++] = new Property( "this", "Object", "function" );
PROPERTY[p++] = new Property( "this", "Number", "function" );
PROPERTY[p++] = new Property( "this", "Function", "function" );
PROPERTY[p++] = new Property( "this", "Array", "function" );
PROPERTY[p++] = new Property( "this", "String", "function" );
PROPERTY[p++] = new Property( "this", "Boolean", "function" );
PROPERTY[p++] = new Property( "this", "Date", "function" );
PROPERTY[p++] = new Property( "this", "Math", "object" );
// properties and methods of Object objects
PROPERTY[p++] = new Property( "Object", "prototype", "object" );
PROPERTY[p++] = new Property( "Object", "toString", "function" );
PROPERTY[p++] = new Property( "Object", "valueOf", "function" );
PROPERTY[p++] = new Property( "Object", "constructor", "function" );
// properties of the Function object
PROPERTY[p++] = new Property( "Function", "prototype", "function" );
PROPERTY[p++] = new Property( "Function.prototype", "toString", "function" );
PROPERTY[p++] = new Property( "Function.prototype", "length", "number" );
PROPERTY[p++] = new Property( "Function.prototype", "valueOf", "function" );
Function.prototype.myProperty = "hi";
PROPERTY[p++] = new Property( "Function.prototype", "myProperty", "string" );
// properties of the Array object
PROPERTY[p++] = new Property( "Array", "prototype", "object" );
PROPERTY[p++] = new Property( "Array", "length", "number" );
PROPERTY[p++] = new Property( "Array.prototype", "constructor", "function" );
PROPERTY[p++] = new Property( "Array.prototype", "toString", "function" );
PROPERTY[p++] = new Property( "Array.prototype", "join", "function" );
PROPERTY[p++] = new Property( "Array.prototype", "reverse", "function" );
PROPERTY[p++] = new Property( "Array.prototype", "sort", "function" );
// properties of the String object
PROPERTY[p++] = new Property( "String", "prototype", "object" );
PROPERTY[p++] = new Property( "String", "fromCharCode", "function" );
PROPERTY[p++] = new Property( "String.prototype", "toString", "function" );
PROPERTY[p++] = new Property( "String.prototype", "constructor", "function" );
PROPERTY[p++] = new Property( "String.prototype", "valueOf", "function" );
PROPERTY[p++] = new Property( "String.prototype", "charAt", "function" );
PROPERTY[p++] = new Property( "String.prototype", "charCodeAt", "function" );
PROPERTY[p++] = new Property( "String.prototype", "indexOf", "function" );
PROPERTY[p++] = new Property( "String.prototype", "lastIndexOf", "function" );
PROPERTY[p++] = new Property( "String.prototype", "split", "function" );
PROPERTY[p++] = new Property( "String.prototype", "substring", "function" );
PROPERTY[p++] = new Property( "String.prototype", "toLowerCase", "function" );
PROPERTY[p++] = new Property( "String.prototype", "toUpperCase", "function" );
PROPERTY[p++] = new Property( "String.prototype", "length", "number" );
// properties of the Boolean object
PROPERTY[p++] = new Property( "Boolean", "prototype", "object" );
PROPERTY[p++] = new Property( "Boolean", "constructor", "function" );
PROPERTY[p++] = new Property( "Boolean.prototype", "valueOf", "function" );
PROPERTY[p++] = new Property( "Boolean.prototype", "toString", "function" );
// properties of the Number object
PROPERTY[p++] = new Property( "Number", "MAX_VALUE", "number" );
PROPERTY[p++] = new Property( "Number", "MIN_VALUE", "number" );
PROPERTY[p++] = new Property( "Number", "NaN", "number" );
PROPERTY[p++] = new Property( "Number", "NEGATIVE_INFINITY", "number" );
PROPERTY[p++] = new Property( "Number", "POSITIVE_INFINITY", "number" );
PROPERTY[p++] = new Property( "Number.prototype", "toString", "function" );
PROPERTY[p++] = new Property( "Number.prototype", "constructor", "function" );
PROPERTY[p++] = new Property( "Number.prototype", "valueOf", "function" );
// properties of the Math Object.
PROPERTY[p++] = new Property( "Math", "E", "number" );
PROPERTY[p++] = new Property( "Math", "LN10", "number" );
PROPERTY[p++] = new Property( "Math", "LN2", "number" );
PROPERTY[p++] = new Property( "Math", "LOG2E", "number" );
PROPERTY[p++] = new Property( "Math", "LOG10E", "number" );
PROPERTY[p++] = new Property( "Math", "PI", "number" );
PROPERTY[p++] = new Property( "Math", "SQRT1_2", "number" );
PROPERTY[p++] = new Property( "Math", "SQRT2", "number" );
PROPERTY[p++] = new Property( "Math", "abs", "function" );
PROPERTY[p++] = new Property( "Math", "acos", "function" );
PROPERTY[p++] = new Property( "Math", "asin", "function" );
PROPERTY[p++] = new Property( "Math", "atan", "function" );
PROPERTY[p++] = new Property( "Math", "atan2", "function" );
PROPERTY[p++] = new Property( "Math", "ceil", "function" );
PROPERTY[p++] = new Property( "Math", "cos", "function" );
PROPERTY[p++] = new Property( "Math", "exp", "function" );
PROPERTY[p++] = new Property( "Math", "floor", "function" );
PROPERTY[p++] = new Property( "Math", "log", "function" );
PROPERTY[p++] = new Property( "Math", "max", "function" );
PROPERTY[p++] = new Property( "Math", "min", "function" );
PROPERTY[p++] = new Property( "Math", "pow", "function" );
PROPERTY[p++] = new Property( "Math", "random", "function" );
PROPERTY[p++] = new Property( "Math", "round", "function" );
PROPERTY[p++] = new Property( "Math", "sin", "function" );
PROPERTY[p++] = new Property( "Math", "sqrt", "function" );
PROPERTY[p++] = new Property( "Math", "tan", "function" );
// properties of the Date object
PROPERTY[p++] = new Property( "Date", "parse", "function" );
PROPERTY[p++] = new Property( "Date", "prototype", "object" );
PROPERTY[p++] = new Property( "Date", "UTC", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "constructor", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "toString", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "valueOf", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "getTime", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "getYear", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "getFullYear", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "getUTCFullYear", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "getMonth", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "getUTCMonth", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "getDate", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "getUTCDate", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "getDay", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "getUTCDay", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "getHours", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "getUTCHours", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "getMinutes", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "getUTCMinutes", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "getSeconds", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "getUTCSeconds", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "getMilliseconds","function" );
PROPERTY[p++] = new Property( "Date.prototype", "getUTCMilliseconds", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "setTime", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "setMilliseconds","function" );
PROPERTY[p++] = new Property( "Date.prototype", "setUTCMilliseconds", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "setSeconds", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "setUTCSeconds", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "setMinutes", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "setUTCMinutes", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "setHours", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "setUTCHours", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "setDate", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "setUTCDate", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "setMonth", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "setUTCMonth", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "setFullYear", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "setUTCFullYear", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "setYear", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "toLocaleString", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "toUTCString", "function" );
PROPERTY[p++] = new Property( "Date.prototype", "toGMTString", "function" );
for ( var i = 0, RESULT; i < PROPERTY.length; i++ ) {
RESULT = eval("typeof " + PROPERTY[i].object + "." + PROPERTY[i].name );
new TestCase( SECTION,
"typeof " + PROPERTY[i].object + "." + PROPERTY[i].name,
PROPERTY[i].type,
RESULT );
RESULT = eval("typeof " + PROPERTY[i].object + "['" + PROPERTY[i].name +"']");
new TestCase( SECTION,
"typeof " + PROPERTY[i].object + "['" + PROPERTY[i].name +"']",
PROPERTY[i].type,
RESULT );
}
test();
function MyObject( arg0, arg1, arg2, arg3, arg4 ) {
this.name = arg0;
}
function Property( object, name, type ) {
this.object = object;
this.name = name;
this.type = type;
}