gecko/content/media/dash/DASHReader.cpp
Andrea Marchesini 6b08dd17f5 Bug 841493 - Rename nsHTMLMediaElement to HTMLMediaElement, r=Ms2ger
--HG--
rename : content/html/content/public/nsHTMLMediaElement.h => content/html/content/public/HTMLMediaElement.h
rename : content/html/content/src/nsHTMLMediaElement.cpp => content/html/content/src/HTMLMediaElement.cpp
2013-03-19 13:23:54 +01:00

679 lines
22 KiB
C++

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim:set ts=2 sw=2 sts=2 et cindent: */
/* This Source Code Form Is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this file,
* You can obtain one at http://mozilla.org/MPL/2.0/. */
/* DASH - Dynamic Adaptive Streaming over HTTP
*
* DASH is an adaptive bitrate streaming technology where a multimedia file is
* partitioned into one or more segments and delivered to a client using HTTP.
*
* see DASHDecoder.cpp for info on DASH interaction with the media engine.*/
#include "mozilla/dom/TimeRanges.h"
#include "VideoFrameContainer.h"
#include "AbstractMediaDecoder.h"
#include "DASHReader.h"
#include "DASHDecoder.h"
#include <algorithm>
namespace mozilla {
#ifdef PR_LOGGING
PRLogModuleInfo* gDASHReaderLog;
#define LOG(msg, ...) PR_LOG(gDASHReaderLog, PR_LOG_DEBUG, \
("%p [DASHReader] " msg, this, __VA_ARGS__))
#define LOG1(msg) PR_LOG(gDASHReaderLog, PR_LOG_DEBUG, \
("%p [DASHReader] " msg, this))
#else
#define LOG(msg, ...)
#define LOG1(msg)
#endif
DASHReader::DASHReader(AbstractMediaDecoder* aDecoder) :
MediaDecoderReader(aDecoder),
mReadMetadataMonitor("media.dashreader.readmetadata"),
mReadyToReadMetadata(false),
mDecoderIsShuttingDown(false),
mAudioReader(this),
mVideoReader(this),
mAudioReaders(this),
mVideoReaders(this),
mSwitchVideoReaders(false),
mSwitchCount(-1)
{
MOZ_COUNT_CTOR(DASHReader);
#ifdef PR_LOGGING
if (!gDASHReaderLog) {
gDASHReaderLog = PR_NewLogModule("DASHReader");
}
#endif
}
DASHReader::~DASHReader()
{
MOZ_COUNT_DTOR(DASHReader);
}
nsresult
DASHReader::ResetDecode()
{
MediaDecoderReader::ResetDecode();
nsresult rv;
for (uint i = 0; i < mAudioReaders.Length(); i++) {
rv = mAudioReaders[i]->ResetDecode();
NS_ENSURE_SUCCESS(rv, rv);
}
for (uint i = 0; i < mVideoReaders.Length(); i++) {
rv = mVideoReaders[i]->ResetDecode();
NS_ENSURE_SUCCESS(rv, rv);
}
return NS_OK;
}
nsresult
DASHReader::Init(MediaDecoderReader* aCloneDonor)
{
NS_ASSERTION(NS_IsMainThread(), "Should be on main thread.");
ReentrantMonitorAutoEnter mon(mDecoder->GetReentrantMonitor());
NS_ASSERTION(mAudioReaders.Length() != 0 && mVideoReaders.Length() != 0,
"Audio and video readers should exist already.");
nsresult rv;
for (uint i = 0; i < mAudioReaders.Length(); i++) {
rv = mAudioReaders[i]->Init(nullptr);
NS_ENSURE_SUCCESS(rv, rv);
}
for (uint i = 0; i < mVideoReaders.Length(); i++) {
rv = mVideoReaders[i]->Init(nullptr);
NS_ENSURE_SUCCESS(rv, rv);
}
return NS_OK;
}
void
DASHReader::AddAudioReader(DASHRepReader* aAudioReader)
{
NS_ASSERTION(NS_IsMainThread(), "Should be on main thread.");
NS_ENSURE_TRUE_VOID(aAudioReader);
ReentrantMonitorAutoEnter mon(mDecoder->GetReentrantMonitor());
mAudioReaders.AppendElement(aAudioReader);
// XXX For now, just pick the first reader to be default.
if (!mAudioReader)
mAudioReader = aAudioReader;
}
void
DASHReader::AddVideoReader(DASHRepReader* aVideoReader)
{
NS_ASSERTION(NS_IsMainThread(), "Should be on main thread.");
NS_ENSURE_TRUE_VOID(aVideoReader);
ReentrantMonitorAutoEnter mon(mDecoder->GetReentrantMonitor());
mVideoReaders.AppendElement(aVideoReader);
// XXX For now, just pick the first reader to be default.
if (!mVideoReader)
mVideoReader = aVideoReader;
}
bool
DASHReader::HasAudio()
{
NS_ASSERTION(mDecoder->OnDecodeThread(), "Should be on decode thread.");
return mAudioReader ? mAudioReader->HasAudio() : false;
}
bool
DASHReader::HasVideo()
{
NS_ASSERTION(mDecoder->OnDecodeThread(), "Should be on decode thread.");
return mVideoReader ? mVideoReader->HasVideo() : false;
}
int64_t
DASHReader::VideoQueueMemoryInUse()
{
ReentrantMonitorConditionallyEnter mon(!mDecoder->OnDecodeThread(),
mDecoder->GetReentrantMonitor());
return VideoQueueMemoryInUse();
}
int64_t
DASHReader::AudioQueueMemoryInUse()
{
ReentrantMonitorConditionallyEnter mon(!mDecoder->OnDecodeThread(),
mDecoder->GetReentrantMonitor());
return AudioQueueMemoryInUse();
}
bool
DASHReader::DecodeVideoFrame(bool &aKeyframeSkip,
int64_t aTimeThreshold)
{
NS_ASSERTION(mDecoder->OnDecodeThread(), "Should be on decode thread.");
if (mVideoReader) {
return mVideoReader->DecodeVideoFrame(aKeyframeSkip, aTimeThreshold);
} else {
return false;
}
}
bool
DASHReader::DecodeAudioData()
{
NS_ASSERTION(mDecoder->OnDecodeThread(), "Should be on decode thread.");
return (mAudioReader ? mAudioReader->DecodeAudioData() : false);
}
nsresult
DASHReader::ReadMetadata(VideoInfo* aInfo,
MetadataTags** aTags)
{
NS_ASSERTION(mDecoder->OnDecodeThread(), "Should be on decode thread.");
// Wait for MPD to be parsed and child readers created.
LOG1("Waiting for metadata download.");
nsresult rv = WaitForMetadata();
// If we get an abort, return silently; the decoder is shutting down.
if (NS_ERROR_ABORT == rv) {
return NS_OK;
}
// Verify no other errors before continuing.
NS_ENSURE_SUCCESS(rv, rv);
NS_ASSERTION(aTags, "Called with null MetadataTags**.");
*aTags = nullptr;
// Get metadata from child readers.
VideoInfo audioInfo, videoInfo;
// Read metadata for all video streams.
for (uint i = 0; i < mVideoReaders.Length(); i++) {
// Use an nsAutoPtr here to ensure |tags| memory does not leak.
nsAutoPtr<HTMLMediaElement::MetadataTags> tags;
rv = mVideoReaders[i]->ReadMetadata(&videoInfo, getter_Transfers(tags));
NS_ENSURE_SUCCESS(rv, rv);
// Use metadata from current video sub reader to populate aInfo.
if (mVideoReaders[i] == mVideoReader) {
mInfo.mHasVideo = videoInfo.mHasVideo;
mInfo.mDisplay = videoInfo.mDisplay;
}
}
// Read metadata for audio stream.
// Note: Getting metadata tags from audio reader only for now.
// XXX Audio stream switching not yet supported.
if (mAudioReader) {
rv = mAudioReader->ReadMetadata(&audioInfo, aTags);
NS_ENSURE_SUCCESS(rv, rv);
mInfo.mHasAudio = audioInfo.mHasAudio;
mInfo.mAudioRate = audioInfo.mAudioRate;
mInfo.mAudioChannels = audioInfo.mAudioChannels;
mInfo.mStereoMode = audioInfo.mStereoMode;
}
*aInfo = mInfo;
return NS_OK;
}
nsresult
DASHReader::Seek(int64_t aTime,
int64_t aStartTime,
int64_t aEndTime,
int64_t aCurrentTime)
{
NS_ASSERTION(mDecoder->OnDecodeThread(), "Should be on decode thread.");
NS_ENSURE_SUCCESS(ResetDecode(), NS_ERROR_FAILURE);
LOG("Seeking to [%.2fs]", aTime/1000000.0);
nsresult rv;
DASHDecoder* dashDecoder = static_cast<DASHDecoder*>(mDecoder);
if (mAudioReader) {
int64_t subsegmentIdx = -1;
{
ReentrantMonitorAutoEnter mon(mDecoder->GetReentrantMonitor());
subsegmentIdx = mAudioReader->GetSubsegmentForSeekTime(aTime);
NS_ENSURE_TRUE(0 <= subsegmentIdx, NS_ERROR_ILLEGAL_VALUE);
}
dashDecoder->NotifySeekInAudioSubsegment(subsegmentIdx);
rv = mAudioReader->Seek(aTime, aStartTime, aEndTime, aCurrentTime);
NS_ENSURE_SUCCESS(rv, rv);
}
if (mVideoReader) {
// Determine the video subsegment we're seeking to.
int32_t subsegmentIdx = -1;
{
ReentrantMonitorAutoEnter mon(mDecoder->GetReentrantMonitor());
subsegmentIdx = mVideoReader->GetSubsegmentForSeekTime(aTime);
NS_ENSURE_TRUE(0 <= subsegmentIdx, NS_ERROR_ILLEGAL_VALUE);
}
LOG("Seek to [%.2fs] found in video subsegment [%d]",
aTime/1000000.0, subsegmentIdx);
// Determine if/which video reader previously downloaded this subsegment.
int32_t readerIdx = dashDecoder->GetRepIdxForVideoSubsegmentLoad(subsegmentIdx);
dashDecoder->NotifySeekInVideoSubsegment(readerIdx, subsegmentIdx);
if (0 <= readerIdx) {
NS_ENSURE_TRUE(readerIdx < mVideoReaders.Length(),
NS_ERROR_ILLEGAL_VALUE);
// Switch to this reader and do the Seek.
DASHRepReader* fromReader = mVideoReader;
DASHRepReader* toReader = mVideoReaders[readerIdx];
{
ReentrantMonitorAutoEnter mon(mDecoder->GetReentrantMonitor());
if (fromReader != toReader) {
LOG("Switching video readers now from [%p] to [%p] for a seek to "
"[%.2fs] in subsegment [%d]",
fromReader, toReader, aTime/1000000.0, subsegmentIdx);
mVideoReader = toReader;
}
}
rv = mVideoReader->Seek(aTime, aStartTime, aEndTime, aCurrentTime);
if (NS_FAILED(rv)) {
NS_ENSURE_SUCCESS(rv, rv);
}
// Go back to the appropriate count in the switching history, and setup
// this main reader and the sub readers for the next switch (if any).
{
ReentrantMonitorAutoEnter mon(mDecoder->GetReentrantMonitor());
mSwitchCount = dashDecoder->GetSwitchCountAtVideoSubsegment(subsegmentIdx);
LOG("After mVideoReader->Seek() mSwitchCount %d", mSwitchCount);
NS_ENSURE_TRUE(0 <= mSwitchCount, NS_ERROR_ILLEGAL_VALUE);
NS_ENSURE_TRUE(mSwitchCount <= subsegmentIdx, NS_ERROR_ILLEGAL_VALUE);
}
} else {
LOG("Error getting rep idx for video subsegment [%d]",
subsegmentIdx);
}
}
return NS_OK;
}
nsresult
DASHReader::GetBuffered(TimeRanges* aBuffered,
int64_t aStartTime)
{
NS_ENSURE_ARG(aBuffered);
MediaResource* resource = nullptr;
AbstractMediaDecoder* decoder = nullptr;
TimeRanges audioBuffered, videoBuffered;
uint32_t audioRangeCount = 0, videoRangeCount = 0;
bool audioCachedAtEnd = false, videoCachedAtEnd = false;
nsresult rv = NS_OK;
// Get all audio and video buffered ranges. Include inactive streams, since
// we may have carried out a seek and future subsegments may be in currently
// inactive decoders.
ReentrantMonitorConditionallyEnter mon(!mDecoder->OnDecodeThread(),
mDecoder->GetReentrantMonitor());
for (uint32_t i = 0; i < mAudioReaders.Length(); i++) {
decoder = mAudioReaders[i]->GetDecoder();
NS_ENSURE_TRUE(decoder, NS_ERROR_NULL_POINTER);
resource = decoder->GetResource();
NS_ENSURE_TRUE(resource, NS_ERROR_NULL_POINTER);
resource->Pin();
rv = mAudioReaders[i]->GetBuffered(&audioBuffered, aStartTime);
NS_ENSURE_SUCCESS(rv, rv);
// If data was cached at the end, then the final timestamp refers to the
// end of the data. Use this later to extend end time if necessary.
if (!audioCachedAtEnd) {
audioCachedAtEnd = mAudioReaders[i]->IsDataCachedAtEndOfSubsegments();
}
resource->Unpin();
}
for (uint32_t i = 0; i < mVideoReaders.Length(); i++) {
decoder = mVideoReaders[i]->GetDecoder();
NS_ENSURE_TRUE(decoder, NS_ERROR_NULL_POINTER);
resource = decoder->GetResource();
NS_ENSURE_TRUE(resource, NS_ERROR_NULL_POINTER);
resource->Pin();
rv = mVideoReaders[i]->GetBuffered(&videoBuffered, aStartTime);
NS_ENSURE_SUCCESS(rv, rv);
// If data was cached at the end, then the final timestamp refers to the
// end of the data. Use this later to extend end time if necessary.
if (!videoCachedAtEnd) {
videoCachedAtEnd = mVideoReaders[i]->IsDataCachedAtEndOfSubsegments();
}
resource->Unpin();
}
audioBuffered.Normalize();
videoBuffered.Normalize();
rv = audioBuffered.GetLength(&audioRangeCount);
NS_ENSURE_SUCCESS(rv, rv);
rv = videoBuffered.GetLength(&videoRangeCount);
NS_ENSURE_SUCCESS(rv, rv);
#ifdef PR_LOGGING
double start = 0, end = 0;
for (uint32_t i = 0; i < audioRangeCount; i++) {
rv = audioBuffered.Start(i, &start);
NS_ENSURE_SUCCESS(rv, rv);
rv = audioBuffered.End(i, &end);
NS_ENSURE_SUCCESS(rv, rv);
LOG("audioBuffered[%d] = (%f, %f)",
i, start, end);
}
for (uint32_t i = 0; i < videoRangeCount; i++) {
rv = videoBuffered.Start(i, &start);
NS_ENSURE_SUCCESS(rv, rv);
rv = videoBuffered.End(i, &end);
NS_ENSURE_SUCCESS(rv, rv);
LOG("videoBuffered[%d] = (%f, %f)",
i, start, end);
}
#endif
// If audio and video are cached to the end of their subsegments, extend the
// end time of the shorter of the two. Presentation of the shorter stream
// will stop at the end, while the other continues until the combined
// playback is complete.
// Note: Only in cases where the shorter stream is fully cached, and the
// longer stream is partially cached, but with more time buffered than the
// shorter stream.
//
// Audio ========|
// 20
// Video ============|----|
// 30 40
// Combo ============| <----- End time EXTENDED.
//
// For example, audio is fully cached to 20s, but video is partially cached
// to 30s, full duration 40s. In this case, the buffered end time should be
// extended to the video's end time.
//
// Audio =================|
// 40
// Video ========|----|
// 20 30
// Combo ========| <------ End time NOT EXTENDED.
//
// Conversely, if the longer stream is fully cached, but the shorter one is
// not, no extension of end time should occur - we should consider the
// partially cached, shorter end time to be the end time of the combined
// stream
if (audioCachedAtEnd || videoCachedAtEnd) {
NS_ENSURE_TRUE(audioRangeCount, NS_ERROR_FAILURE);
NS_ENSURE_TRUE(videoRangeCount, NS_ERROR_FAILURE);
double audioEndTime = 0, videoEndTime = 0;
// Get end time of the last range of buffered audio.
audioEndTime = audioBuffered.GetFinalEndTime();
NS_ENSURE_TRUE(audioEndTime > 0, NS_ERROR_ILLEGAL_VALUE);
// Get end time of the last range of buffered video.
videoEndTime = videoBuffered.GetFinalEndTime();
NS_ENSURE_TRUE(videoEndTime > 0, NS_ERROR_ILLEGAL_VALUE);
// API for TimeRanges requires extending through adding and normalizing.
if (videoCachedAtEnd && audioEndTime > videoEndTime) {
videoBuffered.Add(videoEndTime, audioEndTime);
videoBuffered.Normalize();
LOG("videoBuffered extended to %f", audioEndTime);
} else if (audioCachedAtEnd && videoEndTime > audioEndTime) {
audioBuffered.Add(audioEndTime, videoEndTime);
audioBuffered.Normalize();
LOG("audioBuffered extended to %f", videoEndTime);
}
}
// Calculate intersecting ranges for video and audio.
if (!mAudioReaders.IsEmpty() && !mVideoReaders.IsEmpty()) {
for (uint32_t i = 0; i < audioRangeCount; i++) {
// |A|udio, |V|ideo, |I|ntersect.
double startA, startV, startI;
double endA, endV, endI;
rv = audioBuffered.Start(i, &startA);
NS_ENSURE_SUCCESS(rv, rv);
rv = audioBuffered.End(i, &endA);
NS_ENSURE_SUCCESS(rv, rv);
for (uint32_t j = 0; j < videoRangeCount; j++) {
rv = videoBuffered.Start(i, &startV);
NS_ENSURE_SUCCESS(rv, rv);
rv = videoBuffered.End(i, &endV);
NS_ENSURE_SUCCESS(rv, rv);
// If video block is before audio block, compare next video block.
if (startA > endV) {
continue;
// If video block is after audio block, all of them are; compare next
// audio block.
} else if (endA < startV) {
break;
}
// Calculate intersections of current audio and video blocks.
startI = (startA > startV) ? startA : startV;
endI = (endA > endV) ? endV : endA;
aBuffered->Add(startI, endI);
}
}
} else if (!mAudioReaders.IsEmpty()) {
*aBuffered = audioBuffered;
} else if (!mVideoReaders.IsEmpty()) {
*aBuffered = videoBuffered;
} else {
return NS_ERROR_NOT_INITIALIZED;
}
return NS_OK;
}
VideoData*
DASHReader::FindStartTime(int64_t& aOutStartTime)
{
NS_ASSERTION(mDecoder->OnStateMachineThread() || mDecoder->OnDecodeThread(),
"Should be on state machine or decode thread.");
// Extract the start times of the bitstreams in order to calculate
// the duration.
int64_t videoStartTime = INT64_MAX;
int64_t audioStartTime = INT64_MAX;
VideoData* videoData = nullptr;
ReentrantMonitorConditionallyEnter mon(!mDecoder->OnDecodeThread(),
mDecoder->GetReentrantMonitor());
if (HasVideo()) {
// Forward to video reader.
videoData = mVideoReader->DecodeToFirstVideoData();
if (videoData) {
videoStartTime = videoData->mTime;
}
}
if (HasAudio()) {
// Forward to audio reader.
AudioData* audioData = mAudioReader->DecodeToFirstAudioData();
if (audioData) {
audioStartTime = audioData->mTime;
}
}
int64_t startTime = std::min(videoStartTime, audioStartTime);
if (startTime != INT64_MAX) {
aOutStartTime = startTime;
}
return videoData;
}
MediaQueue<AudioData>&
DASHReader::AudioQueue()
{
ReentrantMonitorConditionallyEnter mon(!mDecoder->OnDecodeThread(),
mDecoder->GetReentrantMonitor());
NS_ASSERTION(mAudioReader, "mAudioReader is NULL!");
return mAudioQueue;
}
MediaQueue<VideoData>&
DASHReader::VideoQueue()
{
ReentrantMonitorConditionallyEnter mon(!mDecoder->OnDecodeThread(),
mDecoder->GetReentrantMonitor());
NS_ASSERTION(mVideoReader, "mVideoReader is NULL!");
return mVideoQueue;
}
void
DASHReader::RequestVideoReaderSwitch(uint32_t aFromReaderIdx,
uint32_t aToReaderIdx,
uint32_t aSubsegmentIdx)
{
NS_ASSERTION(NS_IsMainThread(), "Should be on main thread.");
NS_ASSERTION(aFromReaderIdx < mVideoReaders.Length(),
"From index is greater than number of video readers!");
NS_ASSERTION(aToReaderIdx < mVideoReaders.Length(),
"To index is greater than number of video readers!");
NS_ASSERTION(aToReaderIdx != aFromReaderIdx,
"Don't request switches to same reader!");
mDecoder->GetReentrantMonitor().AssertCurrentThreadIn();
if (mSwitchCount < 0) {
mSwitchCount = 0;
}
DASHRepReader* fromReader = mVideoReaders[aFromReaderIdx];
DASHRepReader* toReader = mVideoReaders[aToReaderIdx];
LOG("Switch requested from reader [%d] [%p] to reader [%d] [%p] "
"at subsegment[%d].",
aFromReaderIdx, fromReader, aToReaderIdx, toReader, aSubsegmentIdx);
// Append the subsegment index to the list of pending switches.
for (uint32_t i = 0; i < mSwitchToVideoSubsegmentIndexes.Length(); i++) {
if (mSwitchToVideoSubsegmentIndexes[i] == aSubsegmentIdx) {
// A backwards |Seek| has changed the switching history; delete from
// this point on.
mSwitchToVideoSubsegmentIndexes.TruncateLength(i);
break;
}
}
mSwitchToVideoSubsegmentIndexes.AppendElement(aSubsegmentIdx);
// Tell the SWITCH FROM reader when it should stop reading.
fromReader->RequestSwitchAtSubsegment(aSubsegmentIdx, toReader);
// Tell the SWITCH TO reader to seek to the correct offset.
toReader->RequestSeekToSubsegment(aSubsegmentIdx);
mSwitchVideoReaders = true;
}
void
DASHReader::PossiblySwitchVideoReaders()
{
NS_ASSERTION(mDecoder, "Decoder should not be null");
NS_ASSERTION(mDecoder->OnDecodeThread(), "Should be on decode thread.");
// Flag to switch streams is set in |RequestVideoReaderSwitch|.
if (!mSwitchVideoReaders) {
return;
}
// Only switch if we reached a switch access point.
NS_ENSURE_TRUE_VOID(0 <= mSwitchCount);
NS_ENSURE_TRUE_VOID((uint32_t)mSwitchCount < mSwitchToVideoSubsegmentIndexes.Length());
uint32_t switchIdx = mSwitchToVideoSubsegmentIndexes[mSwitchCount];
if (!mVideoReader->HasReachedSubsegment(switchIdx)) {
return;
}
// Get Representation index to switch to.
DASHDecoder* dashDecoder = static_cast<DASHDecoder*>(mDecoder);
int32_t toReaderIdx = dashDecoder->GetRepIdxForVideoSubsegmentLoad(switchIdx);
NS_ENSURE_TRUE_VOID(0 <= toReaderIdx);
NS_ENSURE_TRUE_VOID((uint32_t)toReaderIdx < mVideoReaders.Length());
DASHRepReader* fromReader = mVideoReader;
DASHRepReader* toReader = mVideoReaders[toReaderIdx];
NS_ENSURE_TRUE_VOID(fromReader != toReader);
LOG("Switching video readers now from [%p] to [%p] at subsegment [%d]: "
"mSwitchCount [%d].",
fromReader, toReader, switchIdx, mSwitchCount);
// Switch readers while in the monitor.
ReentrantMonitorAutoEnter mon(mDecoder->GetReentrantMonitor());
mVideoReader = toReader;
// Prep readers for next switch, also while in monitor.
if ((uint32_t)++mSwitchCount < mSwitchToVideoSubsegmentIndexes.Length()) {
// Get the subsegment at which to switch.
switchIdx = mSwitchToVideoSubsegmentIndexes[mSwitchCount];
// Update from and to reader ptrs for next switch.
fromReader = toReader;
toReaderIdx = dashDecoder->GetRepIdxForVideoSubsegmentLoad(switchIdx);
toReader = mVideoReaders[toReaderIdx];
NS_ENSURE_TRUE_VOID((uint32_t)toReaderIdx < mVideoReaders.Length());
NS_ENSURE_TRUE_VOID(fromReader != toReader);
// Tell the SWITCH FROM reader when it should stop reading.
fromReader->RequestSwitchAtSubsegment(switchIdx, toReader);
// Tell the SWITCH TO reader to seek to the correct offset.
toReader->RequestSeekToSubsegment(switchIdx);
} else {
// If there are no more pending switches, unset the switch readers flag.
mSwitchVideoReaders = false;
}
}
void
DASHReader::PrepareToDecode()
{
NS_ASSERTION(mDecoder->OnDecodeThread(), "Should be on decode thread.");
// Flag to switch streams is set by |DASHDecoder|.
if (!mSwitchVideoReaders) {
return;
}
PossiblySwitchVideoReaders();
// Prepare each sub reader for decoding: includes seeking to the correct
// offset if a seek was previously requested.
for (uint32_t i = 0; i < mVideoReaders.Length(); i++) {
mVideoReaders[i]->PrepareToDecode();
}
}
DASHRepReader*
DASHReader::GetReaderForSubsegment(uint32_t aSubsegmentIdx)
{
NS_ASSERTION(mDecoder->OnDecodeThread(), "Should be on decode thread.");
DASHDecoder* dashDecoder = static_cast<DASHDecoder*>(mDecoder);
int32_t repIdx =
dashDecoder->GetRepIdxForVideoSubsegmentLoadAfterSeek((int32_t)aSubsegmentIdx);
if (0 <= repIdx && repIdx < mVideoReaders.Length()) {
return mVideoReaders[repIdx];
} else {
return nullptr;
}
}
} // namespace mozilla