gecko/content/base/src/nsImageLoadingContent.cpp

852 lines
25 KiB
C++

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
// vim: ft=cpp tw=78 sw=2 et ts=2
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* Boris Zbarsky <bzbarsky@mit.edu>.
* Portions created by the Initial Developer are Copyright (C) 2003
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Christian Biesinger <cbiesinger@web.de>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/*
* A base class which implements nsIImageLoadingContent and can be
* subclassed by various content nodes that want to provide image
* loading functionality (eg <img>, <object>, etc).
*/
#include "nsImageLoadingContent.h"
#include "nsAutoPtr.h"
#include "nsContentErrors.h"
#include "nsIContent.h"
#include "nsIDocument.h"
#include "nsIScriptGlobalObject.h"
#include "nsIDOMWindow.h"
#include "nsServiceManagerUtils.h"
#include "nsContentPolicyUtils.h"
#include "nsIURI.h"
#include "nsILoadGroup.h"
#include "imgIContainer.h"
#include "gfxIImageFrame.h"
#include "imgILoader.h"
#include "nsThreadUtils.h"
#include "nsNetUtil.h"
#include "nsPresContext.h"
#include "nsIPresShell.h"
#include "nsIEventStateManager.h"
#include "nsGUIEvent.h"
#include "nsIChannel.h"
#include "nsIStreamListener.h"
#include "nsIFrame.h"
#include "nsIDOMNode.h"
#include "nsContentUtils.h"
#include "nsIContentPolicy.h"
#include "nsContentPolicyUtils.h"
#include "nsEventDispatcher.h"
#include "nsDOMClassInfo.h"
#include "mozAutoDocUpdate.h"
#ifdef DEBUG_chb
static void PrintReqURL(imgIRequest* req) {
if (!req) {
printf("(null req)\n");
return;
}
nsCOMPtr<nsIURI> uri;
req->GetURI(getter_AddRefs(uri));
if (!uri) {
printf("(null uri)\n");
return;
}
nsCAutoString spec;
uri->GetSpec(spec);
printf("spec='%s'\n", spec.get());
}
#endif /* DEBUG_chb */
nsImageLoadingContent::nsImageLoadingContent()
: mObserverList(nsnull),
mImageBlockingStatus(nsIContentPolicy::ACCEPT),
mLoadingEnabled(PR_TRUE),
mStartingLoad(PR_FALSE),
mLoading(PR_FALSE),
// mBroken starts out true, since an image without a URI is broken....
mBroken(PR_TRUE),
mUserDisabled(PR_FALSE),
mSuppressed(PR_FALSE)
{
if (!nsContentUtils::GetImgLoader()) {
mLoadingEnabled = PR_FALSE;
}
}
void
nsImageLoadingContent::DestroyImageLoadingContent()
{
// Cancel our requests so they won't hold stale refs to us
if (mCurrentRequest) {
mCurrentRequest->Cancel(NS_ERROR_FAILURE);
mCurrentRequest = nsnull;
}
if (mPendingRequest) {
mPendingRequest->Cancel(NS_ERROR_FAILURE);
mPendingRequest = nsnull;
}
}
nsImageLoadingContent::~nsImageLoadingContent()
{
NS_ASSERTION(!mCurrentRequest && !mPendingRequest,
"DestroyImageLoadingContent not called");
NS_ASSERTION(!mObserverList.mObserver && !mObserverList.mNext,
"Observers still registered?");
}
// Macro to call some func on each observer. This handles observers
// removing themselves.
#define LOOP_OVER_OBSERVERS(func_) \
PR_BEGIN_MACRO \
for (ImageObserver* observer = &mObserverList, *next; observer; \
observer = next) { \
next = observer->mNext; \
if (observer->mObserver) { \
observer->mObserver->func_; \
} \
} \
PR_END_MACRO
/*
* imgIContainerObserver impl
*/
NS_IMETHODIMP
nsImageLoadingContent::FrameChanged(imgIContainer* aContainer,
gfxIImageFrame* aFrame,
nsRect* aDirtyRect)
{
LOOP_OVER_OBSERVERS(FrameChanged(aContainer, aFrame, aDirtyRect));
return NS_OK;
}
/*
* imgIDecoderObserver impl
*/
NS_IMETHODIMP
nsImageLoadingContent::OnStartRequest(imgIRequest* aRequest)
{
LOOP_OVER_OBSERVERS(OnStartRequest(aRequest));
return NS_OK;
}
NS_IMETHODIMP
nsImageLoadingContent::OnStartDecode(imgIRequest* aRequest)
{
LOOP_OVER_OBSERVERS(OnStartDecode(aRequest));
return NS_OK;
}
NS_IMETHODIMP
nsImageLoadingContent::OnStartContainer(imgIRequest* aRequest,
imgIContainer* aContainer)
{
LOOP_OVER_OBSERVERS(OnStartContainer(aRequest, aContainer));
// Have to check for state changes here, since we might have been in
// the LOADING state before.
UpdateImageState(PR_TRUE);
return NS_OK;
}
NS_IMETHODIMP
nsImageLoadingContent::OnStartFrame(imgIRequest* aRequest,
gfxIImageFrame* aFrame)
{
LOOP_OVER_OBSERVERS(OnStartFrame(aRequest, aFrame));
return NS_OK;
}
NS_IMETHODIMP
nsImageLoadingContent::OnDataAvailable(imgIRequest* aRequest,
gfxIImageFrame* aFrame,
const nsRect* aRect)
{
LOOP_OVER_OBSERVERS(OnDataAvailable(aRequest, aFrame, aRect));
return NS_OK;
}
NS_IMETHODIMP
nsImageLoadingContent::OnStopFrame(imgIRequest* aRequest,
gfxIImageFrame* aFrame)
{
LOOP_OVER_OBSERVERS(OnStopFrame(aRequest, aFrame));
return NS_OK;
}
NS_IMETHODIMP
nsImageLoadingContent::OnStopContainer(imgIRequest* aRequest,
imgIContainer* aContainer)
{
LOOP_OVER_OBSERVERS(OnStopContainer(aRequest, aContainer));
return NS_OK;
}
NS_IMETHODIMP
nsImageLoadingContent::OnStopDecode(imgIRequest* aRequest,
nsresult aStatus,
const PRUnichar* aStatusArg)
{
NS_PRECONDITION(aRequest == mCurrentRequest || aRequest == mPendingRequest,
"Unknown request");
LOOP_OVER_OBSERVERS(OnStopDecode(aRequest, aStatus, aStatusArg));
if (aRequest == mPendingRequest) {
mCurrentRequest->Cancel(NS_ERROR_IMAGE_SRC_CHANGED);
mPendingRequest.swap(mCurrentRequest);
mPendingRequest = nsnull;
}
// XXXldb What's the difference between when OnStopDecode and OnStopRequest
// fire? Should we do this work there instead? Should they just be the
// same?
if (NS_SUCCEEDED(aStatus)) {
FireEvent(NS_LITERAL_STRING("load"));
} else {
FireEvent(NS_LITERAL_STRING("error"));
}
// Have to check for state changes here (for example, the new load could
// have resulted in a broken image). Note that we don't want to do this
// async, unlike the event, because while this is waiting to happen our
// state could change yet again, and then we'll get confused about our
// state.
UpdateImageState(PR_TRUE);
return NS_OK;
}
NS_IMETHODIMP
nsImageLoadingContent::OnStopRequest(imgIRequest* aRequest, PRBool aLastPart)
{
LOOP_OVER_OBSERVERS(OnStopRequest(aRequest, aLastPart));
return NS_OK;
}
/*
* nsIImageLoadingContent impl
*/
NS_IMETHODIMP
nsImageLoadingContent::GetLoadingEnabled(PRBool *aLoadingEnabled)
{
*aLoadingEnabled = mLoadingEnabled;
return NS_OK;
}
NS_IMETHODIMP
nsImageLoadingContent::SetLoadingEnabled(PRBool aLoadingEnabled)
{
if (nsContentUtils::GetImgLoader()) {
mLoadingEnabled = aLoadingEnabled;
}
return NS_OK;
}
NS_IMETHODIMP
nsImageLoadingContent::GetImageBlockingStatus(PRInt16* aStatus)
{
NS_PRECONDITION(aStatus, "Null out param");
*aStatus = mImageBlockingStatus;
return NS_OK;
}
NS_IMETHODIMP
nsImageLoadingContent::AddObserver(imgIDecoderObserver* aObserver)
{
NS_ENSURE_ARG_POINTER(aObserver);
if (!mObserverList.mObserver) {
mObserverList.mObserver = aObserver;
// Don't touch the linking of the list!
return NS_OK;
}
// otherwise we have to create a new entry
ImageObserver* observer = &mObserverList;
while (observer->mNext) {
observer = observer->mNext;
}
observer->mNext = new ImageObserver(aObserver);
if (! observer->mNext) {
return NS_ERROR_OUT_OF_MEMORY;
}
return NS_OK;
}
NS_IMETHODIMP
nsImageLoadingContent::RemoveObserver(imgIDecoderObserver* aObserver)
{
NS_ENSURE_ARG_POINTER(aObserver);
if (mObserverList.mObserver == aObserver) {
mObserverList.mObserver = nsnull;
// Don't touch the linking of the list!
return NS_OK;
}
// otherwise have to find it and splice it out
ImageObserver* observer = &mObserverList;
while (observer->mNext && observer->mNext->mObserver != aObserver) {
observer = observer->mNext;
}
// At this point, we are pointing to the list element whose mNext is
// the right observer (assuming of course that mNext is not null)
if (observer->mNext) {
// splice it out
ImageObserver* oldObserver = observer->mNext;
observer->mNext = oldObserver->mNext;
oldObserver->mNext = nsnull; // so we don't destroy them all
delete oldObserver;
}
#ifdef DEBUG
else {
NS_WARNING("Asked to remove non-existent observer");
}
#endif
return NS_OK;
}
NS_IMETHODIMP
nsImageLoadingContent::GetRequest(PRInt32 aRequestType,
imgIRequest** aRequest)
{
switch(aRequestType) {
case CURRENT_REQUEST:
*aRequest = mCurrentRequest;
break;
case PENDING_REQUEST:
*aRequest = mPendingRequest;
break;
default:
NS_ERROR("Unknown request type");
*aRequest = nsnull;
return NS_ERROR_UNEXPECTED;
}
NS_IF_ADDREF(*aRequest);
return NS_OK;
}
NS_IMETHODIMP
nsImageLoadingContent::GetRequestType(imgIRequest* aRequest,
PRInt32* aRequestType)
{
NS_PRECONDITION(aRequestType, "Null out param");
if (aRequest == mCurrentRequest) {
*aRequestType = CURRENT_REQUEST;
return NS_OK;
}
if (aRequest == mPendingRequest) {
*aRequestType = PENDING_REQUEST;
return NS_OK;
}
*aRequestType = UNKNOWN_REQUEST;
NS_ERROR("Unknown request");
return NS_ERROR_UNEXPECTED;
}
NS_IMETHODIMP
nsImageLoadingContent::GetCurrentURI(nsIURI** aURI)
{
if (mCurrentRequest) {
return mCurrentRequest->GetURI(aURI);
}
if (!mCurrentURI) {
*aURI = nsnull;
return NS_OK;
}
return NS_EnsureSafeToReturn(mCurrentURI, aURI);
}
NS_IMETHODIMP
nsImageLoadingContent::LoadImageWithChannel(nsIChannel* aChannel,
nsIStreamListener** aListener)
{
NS_PRECONDITION(aListener, "null out param");
NS_ENSURE_ARG_POINTER(aChannel);
if (!nsContentUtils::GetImgLoader()) {
return NS_ERROR_NULL_POINTER;
}
// XXX what should we do with content policies here, if anything?
// Shouldn't that be done before the start of the load?
// XXX what about shouldProcess?
nsCOMPtr<nsIDocument> doc = GetOurDocument();
if (!doc) {
// Don't bother
return NS_OK;
}
// Null out our mCurrentURI, in case we have no image requests right now.
mCurrentURI = nsnull;
CancelImageRequests(NS_ERROR_IMAGE_SRC_CHANGED, PR_FALSE,
nsIContentPolicy::ACCEPT);
nsCOMPtr<imgIRequest> & req = mCurrentRequest ? mPendingRequest : mCurrentRequest;
nsresult rv = nsContentUtils::GetImgLoader()->
LoadImageWithChannel(aChannel, this, doc, aListener, getter_AddRefs(req));
// Make sure our state is up to date
UpdateImageState(PR_TRUE);
return rv;
}
NS_IMETHODIMP nsImageLoadingContent::ForceReload()
{
nsCOMPtr<nsIURI> currentURI;
GetCurrentURI(getter_AddRefs(currentURI));
if (!currentURI) {
return NS_ERROR_NOT_AVAILABLE;
}
return LoadImage(currentURI, PR_TRUE, PR_TRUE, nsnull, nsIRequest::VALIDATE_ALWAYS);
}
/*
* Non-interface methods
*/
nsresult
nsImageLoadingContent::LoadImage(const nsAString& aNewURI,
PRBool aForce,
PRBool aNotify)
{
// First, get a document (needed for security checks and the like)
nsIDocument* doc = GetOurDocument();
if (!doc) {
// No reason to bother, I think...
return NS_OK;
}
nsCOMPtr<nsIURI> imageURI;
nsresult rv = StringToURI(aNewURI, doc, getter_AddRefs(imageURI));
NS_ENSURE_SUCCESS(rv, rv);
// XXXbiesi fire onerror if that failed?
NS_TryToSetImmutable(imageURI);
return LoadImage(imageURI, aForce, aNotify, doc);
}
nsresult
nsImageLoadingContent::LoadImage(nsIURI* aNewURI,
PRBool aForce,
PRBool aNotify,
nsIDocument* aDocument,
nsLoadFlags aLoadFlags)
{
if (!mLoadingEnabled) {
FireEvent(NS_LITERAL_STRING("error"));
return NS_OK;
}
NS_ASSERTION(!aDocument || aDocument == GetOurDocument(),
"Bogus document passed in");
// First, get a document (needed for security checks and the like)
if (!aDocument) {
aDocument = GetOurDocument();
if (!aDocument) {
// No reason to bother, I think...
return NS_OK;
}
}
nsresult rv; // XXXbz Should failures in this method fire onerror?
// Skip the URI equality check if our current image was blocked. If
// that happened, we really do want to try loading again.
if (!aForce && NS_CP_ACCEPTED(mImageBlockingStatus)) {
nsCOMPtr<nsIURI> currentURI;
GetCurrentURI(getter_AddRefs(currentURI));
PRBool equal;
if (currentURI &&
NS_SUCCEEDED(currentURI->Equals(aNewURI, &equal)) &&
equal) {
// Nothing to do here.
return NS_OK;
}
}
// From this point on, our state could change before return, so make
// sure to notify if it does.
AutoStateChanger changer(this, aNotify);
// Use the principal of aDocument to avoid having to QI |this| an extra time.
// It should be the same as the principal of this node in any case.
#ifdef DEBUG
nsCOMPtr<nsIContent> thisContent = do_QueryInterface(this);
NS_ASSERTION(thisContent &&
thisContent->NodePrincipal() == aDocument->NodePrincipal(),
"Principal mismatch?");
#endif
// If we'll be loading a new image, we want to cancel our existing
// requests; the question is what reason to pass in. If everything
// is going smoothly, that reason should be
// NS_ERROR_IMAGE_SRC_CHANGED so that our frame (if any) will know
// not to show the broken image icon. If the load is blocked by the
// content policy or security manager, we will want to cancel with
// the error code from those.
PRInt16 newImageStatus;
PRBool loadImage = nsContentUtils::CanLoadImage(aNewURI, this, aDocument,
aDocument->NodePrincipal(),
&newImageStatus);
NS_ASSERTION(loadImage || !NS_CP_ACCEPTED(newImageStatus),
"CanLoadImage lied");
nsresult cancelResult = loadImage ? NS_ERROR_IMAGE_SRC_CHANGED
: NS_ERROR_IMAGE_BLOCKED;
CancelImageRequests(cancelResult, PR_FALSE, newImageStatus);
// Remember the URL of this request, in case someone asks us for it later.
// But this only matters if we are affecting the current request. Need to do
// this after CancelImageRequests, since that affects the value of
// mCurrentRequest.
if (!mCurrentRequest) {
mCurrentURI = aNewURI;
}
if (!loadImage) {
// Don't actually load anything! This was blocked by CanLoadImage.
FireEvent(NS_LITERAL_STRING("error"));
return NS_OK;
}
nsCOMPtr<imgIRequest> & req = mCurrentRequest ? mPendingRequest : mCurrentRequest;
rv = nsContentUtils::LoadImage(aNewURI, aDocument,
aDocument->NodePrincipal(),
aDocument->GetDocumentURI(),
this, aLoadFlags,
getter_AddRefs(req));
if (NS_FAILED(rv)) {
FireEvent(NS_LITERAL_STRING("error"));
return NS_OK;
}
// If we now have a current request, we don't need to store the URI, since
// we can get it off the request. Release it.
if (mCurrentRequest) {
mCurrentURI = nsnull;
}
return NS_OK;
}
PRInt32
nsImageLoadingContent::ImageState() const
{
return
(mBroken * NS_EVENT_STATE_BROKEN) |
(mUserDisabled * NS_EVENT_STATE_USERDISABLED) |
(mSuppressed * NS_EVENT_STATE_SUPPRESSED) |
(mLoading * NS_EVENT_STATE_LOADING);
}
void
nsImageLoadingContent::UpdateImageState(PRBool aNotify)
{
if (mStartingLoad) {
// Ignore this call; we'll update our state when the state changer is
// destroyed. Need this to work around the fact that some libpr0n stuff is
// actually sync and hence we can get OnStopDecode called while we're still
// under LoadImage, and OnStopDecode doesn't know anything about
// aNotify
return;
}
nsCOMPtr<nsIContent> thisContent = do_QueryInterface(this);
if (!thisContent) {
return;
}
PRInt32 oldState = ImageState();
mLoading = mBroken = mUserDisabled = mSuppressed = PR_FALSE;
// If we were blocked by server-based content policy, we claim to be
// suppressed. If we were blocked by type-based content policy, we claim to
// be user-disabled. Otherwise, claim to be broken.
if (mImageBlockingStatus == nsIContentPolicy::REJECT_SERVER) {
mSuppressed = PR_TRUE;
} else if (mImageBlockingStatus == nsIContentPolicy::REJECT_TYPE) {
mUserDisabled = PR_TRUE;
} else if (!mCurrentRequest) {
// No current request means error, since we weren't disabled or suppressed
mBroken = PR_TRUE;
} else {
PRUint32 currentLoadStatus;
nsresult rv = mCurrentRequest->GetImageStatus(&currentLoadStatus);
if (NS_FAILED(rv) || (currentLoadStatus & imgIRequest::STATUS_ERROR)) {
mBroken = PR_TRUE;
} else if (!(currentLoadStatus & imgIRequest::STATUS_SIZE_AVAILABLE)) {
mLoading = PR_TRUE;
}
}
if (aNotify) {
nsIDocument* doc = thisContent->GetCurrentDoc();
if (doc) {
NS_ASSERTION(thisContent->IsInDoc(), "Something is confused");
PRInt32 changedBits = oldState ^ ImageState();
if (changedBits) {
mozAutoDocUpdate upd(doc, UPDATE_CONTENT_STATE, PR_TRUE);
doc->ContentStatesChanged(thisContent, nsnull, changedBits);
}
}
}
}
void
nsImageLoadingContent::CancelImageRequests(PRBool aNotify)
{
// Make sure to null out mCurrentURI here, so we no longer look like an image
mCurrentURI = nsnull;
CancelImageRequests(NS_BINDING_ABORTED, PR_TRUE, nsIContentPolicy::ACCEPT);
NS_ASSERTION(!mStartingLoad, "Whence a state changer here?");
UpdateImageState(aNotify);
}
void
nsImageLoadingContent::CancelImageRequests(nsresult aReason,
PRBool aEvenIfSizeAvailable,
PRInt16 aNewImageStatus)
{
// Cancel the pending request, if any
if (mPendingRequest) {
mPendingRequest->Cancel(aReason);
mPendingRequest = nsnull;
}
// Cancel the current request if it has not progressed enough to
// have a size yet
if (mCurrentRequest) {
PRUint32 loadStatus = imgIRequest::STATUS_ERROR;
mCurrentRequest->GetImageStatus(&loadStatus);
NS_ASSERTION(NS_CP_ACCEPTED(mImageBlockingStatus),
"Have current request but blocked image?");
if (aEvenIfSizeAvailable ||
!(loadStatus & imgIRequest::STATUS_SIZE_AVAILABLE)) {
// The new image is going to become the current request. Make sure to
// set mImageBlockingStatus _before_ we cancel the request... if we set
// it after, things that are watching the mCurrentRequest will get wrong
// data.
mImageBlockingStatus = aNewImageStatus;
mCurrentRequest->Cancel(aReason);
mCurrentRequest = nsnull;
}
} else {
// No current request so the new image status will become the
// status of the current request
mImageBlockingStatus = aNewImageStatus;
}
// Note that the only way we could have avoided setting the image blocking
// status above is if we have a current request and have kept it as the
// current request. In that case, we want to leave our old status, since the
// status corresponds to the current request. Even if we plan to do a
// pending request load, having an mCurrentRequest means that our current
// status is not a REJECT_* status, and doing the load shouldn't change that.
// XXXbz there is an issue here if different ACCEPT statuses are used, but...
}
nsresult
nsImageLoadingContent::UseAsPrimaryRequest(imgIRequest* aRequest,
PRBool aNotify)
{
// Use an AutoStateChanger so that the clone call won't
// automatically notify from inside OnStopDecode.
NS_PRECONDITION(aRequest, "Must have a request here!");
AutoStateChanger changer(this, aNotify);
mCurrentURI = nsnull;
CancelImageRequests(NS_BINDING_ABORTED, PR_TRUE, nsIContentPolicy::ACCEPT);
NS_ASSERTION(!mCurrentRequest, "We should not have a current request now");
return aRequest->Clone(this, getter_AddRefs(mCurrentRequest));
}
nsIDocument*
nsImageLoadingContent::GetOurDocument()
{
nsCOMPtr<nsIContent> thisContent = do_QueryInterface(this);
NS_ENSURE_TRUE(thisContent, nsnull);
return thisContent->GetOwnerDoc();
}
nsresult
nsImageLoadingContent::StringToURI(const nsAString& aSpec,
nsIDocument* aDocument,
nsIURI** aURI)
{
NS_PRECONDITION(aDocument, "Must have a document");
NS_PRECONDITION(aURI, "Null out param");
// (1) Get the base URI
nsCOMPtr<nsIContent> thisContent = do_QueryInterface(this);
NS_ASSERTION(thisContent, "An image loading content must be an nsIContent");
nsCOMPtr<nsIURI> baseURL = thisContent->GetBaseURI();
// (2) Get the charset
const nsAFlatCString &charset = aDocument->GetDocumentCharacterSet();
// (3) Construct the silly thing
return NS_NewURI(aURI,
aSpec,
charset.IsEmpty() ? nsnull : charset.get(),
baseURL,
nsContentUtils::GetIOService());
}
/**
* Class used to dispatch events
*/
class nsImageLoadingContent::Event : public nsRunnable
{
public:
Event(nsPresContext* aPresContext, nsImageLoadingContent* aContent,
const nsAString& aMessage, nsIDocument* aDocument)
: mPresContext(aPresContext),
mContent(aContent),
mMessage(aMessage),
mDocument(aDocument)
{
}
~Event()
{
mDocument->UnblockOnload(PR_TRUE);
}
NS_IMETHOD Run();
nsCOMPtr<nsPresContext> mPresContext;
nsRefPtr<nsImageLoadingContent> mContent;
nsString mMessage;
// Need to hold on to the document in case our event outlives document
// teardown... Wantto be able to get back to the document even if the
// prescontext and content can't.
nsCOMPtr<nsIDocument> mDocument;
};
NS_IMETHODIMP
nsImageLoadingContent::Event::Run()
{
PRUint32 eventMsg;
if (mMessage.EqualsLiteral("load")) {
eventMsg = NS_LOAD;
} else {
eventMsg = NS_LOAD_ERROR;
}
nsCOMPtr<nsIContent> ourContent = do_QueryInterface(mContent);
nsEvent event(PR_TRUE, eventMsg);
event.flags |= NS_EVENT_FLAG_CANT_BUBBLE;
nsEventDispatcher::Dispatch(ourContent, mPresContext, &event);
return NS_OK;
}
nsresult
nsImageLoadingContent::FireEvent(const nsAString& aEventType)
{
// We have to fire the event asynchronously so that we won't go into infinite
// loops in cases when onLoad handlers reset the src and the new src is in
// cache.
nsCOMPtr<nsIDocument> document = GetOurDocument();
if (!document) {
// no use to fire events if there is no document....
return NS_OK;
}
// We should not be getting called from off the UI thread...
NS_ASSERTION(NS_IsMainThread(), "should be on the main thread");
nsIPresShell *shell = document->GetPrimaryShell();
nsPresContext *presContext = shell ? shell->GetPresContext() : nsnull;
nsCOMPtr<nsIRunnable> evt =
new nsImageLoadingContent::Event(presContext, this, aEventType, document);
NS_ENSURE_TRUE(evt, NS_ERROR_OUT_OF_MEMORY);
// Block onload for our event. Since we unblock in the event destructor, we
// want to block now, even if posting will fail.
document->BlockOnload();
return NS_DispatchToCurrentThread(evt);
}