gecko/widget/public/nsIPrintSettings.idl
Mitchell Field eb1e793da7 Remove @status FROZEN and @status UNDER_REVIEW. r=bsmedberg
--HG--
extra : rebase_source : 7fab31a6b7898e05ff828482390846cc9ce2854d
2010-07-02 10:27:06 -04:00

333 lines
12 KiB
Plaintext

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 2000
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Don Cone <dcone@netscape.com>
* Rod Spears <rods@netscape.com>
* Roland Mainz <roland.mainz@informatik.med.uni-giessen.de>
* Julien Lafon <julien.lafon@gmail.com>
*
* Alternatively, the contents of this file may be used under the terms of
* either of the GNU General Public License Version 2 or later (the "GPL"),
* or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include "nsISupports.idl"
%{ C++
#include "nsMargin.h"
%}
/**
* Native types
*/
[ref] native nsNativeIntMarginRef(nsIntMargin);
interface nsIPrintSession;
/**
* Simplified graphics interface for JS rendering.
*/
[scriptable, uuid(343700dd-078b-42b6-a809-b9c1d7e951d0)]
interface nsIPrintSettings : nsISupports
{
/**
* PrintSettings to be Saved Navigation Constants
*/
const unsigned long kInitSaveOddEvenPages = 0x00000001;
const unsigned long kInitSaveHeaderLeft = 0x00000002;
const unsigned long kInitSaveHeaderCenter = 0x00000004;
const unsigned long kInitSaveHeaderRight = 0x00000008;
const unsigned long kInitSaveFooterLeft = 0x00000010;
const unsigned long kInitSaveFooterCenter = 0x00000020;
const unsigned long kInitSaveFooterRight = 0x00000040;
const unsigned long kInitSaveBGColors = 0x00000080;
const unsigned long kInitSaveBGImages = 0x00000100;
const unsigned long kInitSavePaperSize = 0x00000200;
/* Flag 0x00000400 is unused */
/* Flag 0x00000800 is unused */
/* Flag 0x00001000 is unused */
const unsigned long kInitSavePaperData = 0x00002000;
const unsigned long kInitSaveUnwriteableMargins = 0x00004000;
const unsigned long kInitSaveEdges = 0x00008000;
const unsigned long kInitSaveReversed = 0x00010000;
const unsigned long kInitSaveInColor = 0x00020000;
const unsigned long kInitSaveOrientation = 0x00040000;
const unsigned long kInitSavePrintCommand = 0x00080000;
const unsigned long kInitSavePrinterName = 0x00100000;
const unsigned long kInitSavePrintToFile = 0x00200000;
const unsigned long kInitSaveToFileName = 0x00400000;
const unsigned long kInitSavePageDelay = 0x00800000;
const unsigned long kInitSaveMargins = 0x01000000;
const unsigned long kInitSaveNativeData = 0x02000000;
const unsigned long kInitSavePlexName = 0x04000000;
const unsigned long kInitSaveShrinkToFit = 0x08000000;
const unsigned long kInitSaveScaling = 0x10000000;
const unsigned long kInitSaveColorspace = 0x20000000;
const unsigned long kInitSaveResolutionName = 0x40000000;
const unsigned long kInitSaveDownloadFonts = 0x80000000;
const unsigned long kInitSaveAll = 0xFFFFFFFF;
/* Print Option Flags for Bit Field*/
const long kPrintOddPages = 0x00000001;
const long kPrintEvenPages = 0x00000002;
const long kEnableSelectionRB = 0x00000004;
/* Print Range Enums */
const long kRangeAllPages = 0;
const long kRangeSpecifiedPageRange = 1;
const long kRangeSelection = 2;
const long kRangeFocusFrame = 3;
/* Justification Enums */
const long kJustLeft = 0;
const long kJustCenter = 1;
const long kJustRight = 2;
/**
* FrameSet Default Type Constants
*/
const short kUseInternalDefault = 0;
const short kUseSettingWhenPossible = 1;
/**
* Page Size Type Constants
*/
const short kPaperSizeNativeData = 0;
const short kPaperSizeDefined = 1;
/**
* Page Size Unit Constants
*/
const short kPaperSizeInches = 0;
const short kPaperSizeMillimeters = 1;
/**
* Orientation Constants
*/
const short kPortraitOrientation = 0;
const short kLandscapeOrientation = 1;
/**
* Print Frame Constants
*/
const short kNoFrames = 0;
const short kFramesAsIs = 1;
const short kSelectedFrame = 2;
const short kEachFrameSep = 3;
/**
* How to Enable Frame Set Printing Constants
*/
const short kFrameEnableNone = 0;
const short kFrameEnableAll = 1;
const short kFrameEnableAsIsAndEach = 2;
/**
* Output file format
*/
const short kOutputFormatNative = 0;
const short kOutputFormatPS = 1;
const short kOutputFormatPDF = 2;
/**
* Set PrintOptions
*/
void SetPrintOptions(in PRInt32 aType, in PRBool aTurnOnOff);
/**
* Get PrintOptions
*/
PRBool GetPrintOptions(in PRInt32 aType);
/**
* Set PrintOptions Bit field
*/
PRInt32 GetPrintOptionsBits();
/**
* Get the page size in twips, considering the
* orientation (portrait or landscape).
*/
void GetEffectivePageSize(out double aWidth, out double aHeight);
/**
* Makes a new copy
*/
nsIPrintSettings clone();
/**
* Assigns the internal values from the "in" arg to the current object
*/
void assign(in nsIPrintSettings aPS);
/**
* Data Members
*/
[noscript] attribute nsIPrintSession printSession; /* We hold a weak reference */
attribute long startPageRange;
attribute long endPageRange;
/**
* The edge measurements define the positioning of the headers
* and footers on the page. They're measured as an offset from
* the "unwriteable margin" (described below).
*/
attribute double edgeTop; /* these are in inches */
attribute double edgeLeft;
attribute double edgeBottom;
attribute double edgeRight;
/**
* The margins define the positioning of the content on the page.
* They're treated as an offset from the "unwriteable margin"
* (described below).
*/
attribute double marginTop; /* these are in inches */
attribute double marginLeft;
attribute double marginBottom;
attribute double marginRight;
/**
* The unwriteable margin defines the printable region of the paper, creating
* an invisible border from which the edge and margin attributes are measured.
*/
attribute double unwriteableMarginTop; /* these are in inches */
attribute double unwriteableMarginLeft;
attribute double unwriteableMarginBottom;
attribute double unwriteableMarginRight;
attribute double scaling; /* values 0.0 - 1.0 */
attribute boolean printBGColors; /* Print Background Colors */
attribute boolean printBGImages; /* Print Background Images */
attribute short printRange;
attribute wstring title;
attribute wstring docURL;
attribute wstring headerStrLeft;
attribute wstring headerStrCenter;
attribute wstring headerStrRight;
attribute wstring footerStrLeft;
attribute wstring footerStrCenter;
attribute wstring footerStrRight;
attribute short howToEnableFrameUI; /* indicates how to enable the frameset UI */
attribute boolean isCancelled; /* indicates whether the print job has been cancelled */
attribute short printFrameTypeUsage; /* indicates whether to use the interal value or not */
attribute short printFrameType;
attribute boolean printSilent; /* print without putting up the dialog */
attribute boolean shrinkToFit; /* shrinks content to fit on page */
attribute boolean showPrintProgress; /* indicates whether the progress dialog should be shown */
/* Additional XP Related */
attribute wstring paperName; /* name of paper */
attribute short paperSizeType; /* use native data or is defined here */
attribute short paperData; /* native data value */
attribute double paperWidth; /* width of the paper in inches or mm */
attribute double paperHeight; /* height of the paper in inches or mm */
attribute short paperSizeUnit; /* paper is in inches or mm */
attribute wstring plexName; /* name of plex mode (like "simplex", "duplex",
* "tumble" and various custom values) */
attribute wstring colorspace; /* device-specific name of colorspace, overrides |printInColor| */
attribute wstring resolutionName;/* device-specific identifer of resolution or quality
* (like "600", "600x300", "600x300x12", "high-res",
* "med-res". "low-res", etc.) */
attribute boolean downloadFonts; /* enable font download to printer? */
attribute boolean printReversed;
attribute boolean printInColor; /* a false means grayscale */
attribute long orientation; /* see orientation consts */
attribute wstring printCommand;
attribute long numCopies;
attribute wstring printerName; /* name of destination printer */
attribute boolean printToFile;
attribute wstring toFileName;
attribute short outputFormat;
attribute long printPageDelay; /* in milliseconds */
/* initialize helpers */
/**
* This attribute tracks whether the PS has been initialized
* from a printer specified by the "printerName" attr.
* If a different name is set into the "printerName"
* attribute than the one it was initialized with the PS
* will then get intialized from that printer.
*/
attribute boolean isInitializedFromPrinter;
/**
* This attribute tracks whether the PS has been initialized
* from prefs. If a different name is set into the "printerName"
* attribute than the one it was initialized with the PS
* will then get intialized from prefs again.
*/
attribute boolean isInitializedFromPrefs;
/* C++ Helper Functions */
[noscript] void SetMarginInTwips(in nsNativeIntMarginRef aMargin);
[noscript] void SetEdgeInTwips(in nsNativeIntMarginRef aEdge);
/* Purposely made this an "in" arg */
[noscript] void GetMarginInTwips(in nsNativeIntMarginRef aMargin);
[noscript] void GetEdgeInTwips(in nsNativeIntMarginRef aEdge);
/**
* We call this function so that anything that requires a run of the event loop
* can do so safely. The print dialog runs the event loop but in silent printing
* that doesn't happen.
*
* Either this or ShowPrintDialog (but not both) MUST be called by the print engine
* before printing, otherwise printing can fail on some platforms.
*/
[noscript] void SetupSilentPrinting();
/**
* Sets/Gets the "unwriteable margin" for the page format. This defines
* the boundary from which we'll measure the EdgeInTwips and MarginInTwips
* attributes, to place the headers and content, respectively.
*
* Note: Implementations of SetUnwriteableMarginInTwips should handle
* negative margin values by falling back on the system default for
* that margin.
*/
[noscript] void SetUnwriteableMarginInTwips(in nsNativeIntMarginRef aEdge);
[noscript] void GetUnwriteableMarginInTwips(in nsNativeIntMarginRef aEdge);
};