gecko/xpcom/threads/nsThreadPool.cpp

438 lines
11 KiB
C++

/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set ts=8 sts=2 et sw=2 tw=80: */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */
#include "nsIClassInfoImpl.h"
#include "nsThreadPool.h"
#include "nsThreadManager.h"
#include "nsThread.h"
#include "nsMemory.h"
#include "nsAutoPtr.h"
#include "prinrval.h"
#include "mozilla/Logging.h"
#include "nsThreadSyncDispatch.h"
using namespace mozilla;
static LazyLogModule sThreadPoolLog("nsThreadPool");
#ifdef LOG
#undef LOG
#endif
#define LOG(args) MOZ_LOG(sThreadPoolLog, mozilla::LogLevel::Debug, args)
// DESIGN:
// o Allocate anonymous threads.
// o Use nsThreadPool::Run as the main routine for each thread.
// o Each thread waits on the event queue's monitor, checking for
// pending events and rescheduling itself as an idle thread.
#define DEFAULT_THREAD_LIMIT 4
#define DEFAULT_IDLE_THREAD_LIMIT 1
#define DEFAULT_IDLE_THREAD_TIMEOUT PR_SecondsToInterval(60)
NS_IMPL_ADDREF(nsThreadPool)
NS_IMPL_RELEASE(nsThreadPool)
NS_IMPL_CLASSINFO(nsThreadPool, nullptr, nsIClassInfo::THREADSAFE,
NS_THREADPOOL_CID)
NS_IMPL_QUERY_INTERFACE_CI(nsThreadPool, nsIThreadPool, nsIEventTarget,
nsIRunnable)
NS_IMPL_CI_INTERFACE_GETTER(nsThreadPool, nsIThreadPool, nsIEventTarget)
nsThreadPool::nsThreadPool()
: mMutex("[nsThreadPool.mMutex]")
, mEvents(mMutex)
, mThreadLimit(DEFAULT_THREAD_LIMIT)
, mIdleThreadLimit(DEFAULT_IDLE_THREAD_LIMIT)
, mIdleThreadTimeout(DEFAULT_IDLE_THREAD_TIMEOUT)
, mIdleCount(0)
, mStackSize(nsIThreadManager::DEFAULT_STACK_SIZE)
, mShutdown(false)
{
LOG(("THRD-P(%p) constructor!!!\n", this));
}
nsThreadPool::~nsThreadPool()
{
// Threads keep a reference to the nsThreadPool until they return from Run()
// after removing themselves from mThreads.
MOZ_ASSERT(mThreads.IsEmpty());
}
nsresult
nsThreadPool::PutEvent(nsIRunnable* aEvent)
{
nsCOMPtr<nsIRunnable> event(aEvent);
return PutEvent(event.forget());
}
nsresult
nsThreadPool::PutEvent(already_AddRefed<nsIRunnable>&& aEvent)
{
// Avoid spawning a new thread while holding the event queue lock...
bool spawnThread = false;
uint32_t stackSize = 0;
{
MutexAutoLock lock(mMutex);
if (NS_WARN_IF(mShutdown)) {
return NS_ERROR_NOT_AVAILABLE;
}
LOG(("THRD-P(%p) put [%d %d %d]\n", this, mIdleCount, mThreads.Count(),
mThreadLimit));
MOZ_ASSERT(mIdleCount <= (uint32_t)mThreads.Count(), "oops");
// Make sure we have a thread to service this event.
if (mThreads.Count() < (int32_t)mThreadLimit &&
// Spawn a new thread if we don't have enough idle threads to serve
// pending events immediately.
mEvents.Count(lock) >= mIdleCount) {
spawnThread = true;
}
mEvents.PutEvent(Move(aEvent), lock);
stackSize = mStackSize;
}
LOG(("THRD-P(%p) put [spawn=%d]\n", this, spawnThread));
if (!spawnThread) {
return NS_OK;
}
nsCOMPtr<nsIThread> thread;
nsThreadManager::get()->NewThread(0,
stackSize,
getter_AddRefs(thread));
if (NS_WARN_IF(!thread)) {
return NS_ERROR_UNEXPECTED;
}
bool killThread = false;
{
MutexAutoLock lock(mMutex);
if (mThreads.Count() < (int32_t)mThreadLimit) {
mThreads.AppendObject(thread);
} else {
killThread = true; // okay, we don't need this thread anymore
}
}
LOG(("THRD-P(%p) put [%p kill=%d]\n", this, thread.get(), killThread));
if (killThread) {
// We never dispatched any events to the thread, so we can shut it down
// asynchronously without worrying about anything.
MOZ_ALWAYS_TRUE(NS_SUCCEEDED(thread->AsyncShutdown()));
} else {
thread->Dispatch(this, NS_DISPATCH_NORMAL);
}
return NS_OK;
}
void
nsThreadPool::ShutdownThread(nsIThread* aThread)
{
LOG(("THRD-P(%p) shutdown async [%p]\n", this, aThread));
// This method is responsible for calling Shutdown on |aThread|. This must be
// done from some other thread, so we use the main thread of the application.
MOZ_ASSERT(!NS_IsMainThread(), "wrong thread");
nsCOMPtr<nsIRunnable> r = NS_NewRunnableMethod(aThread, &nsIThread::Shutdown);
NS_DispatchToMainThread(r);
}
NS_IMETHODIMP
nsThreadPool::Run()
{
mThreadNaming.SetThreadPoolName(mName);
LOG(("THRD-P(%p) enter %s\n", this, mName.BeginReading()));
nsCOMPtr<nsIThread> current;
nsThreadManager::get()->GetCurrentThread(getter_AddRefs(current));
bool shutdownThreadOnExit = false;
bool exitThread = false;
bool wasIdle = false;
PRIntervalTime idleSince;
nsCOMPtr<nsIThreadPoolListener> listener;
{
MutexAutoLock lock(mMutex);
listener = mListener;
}
if (listener) {
listener->OnThreadCreated();
}
do {
nsCOMPtr<nsIRunnable> event;
{
MutexAutoLock lock(mMutex);
if (!mEvents.GetPendingEvent(getter_AddRefs(event), lock)) {
PRIntervalTime now = PR_IntervalNow();
PRIntervalTime timeout = PR_MillisecondsToInterval(mIdleThreadTimeout);
// If we are shutting down, then don't keep any idle threads
if (mShutdown) {
exitThread = true;
} else {
if (wasIdle) {
// if too many idle threads or idle for too long, then bail.
if (mIdleCount > mIdleThreadLimit ||
(mIdleThreadTimeout != UINT32_MAX && (now - idleSince) >= timeout)) {
exitThread = true;
}
} else {
// if would be too many idle threads...
if (mIdleCount == mIdleThreadLimit) {
exitThread = true;
} else {
++mIdleCount;
idleSince = now;
wasIdle = true;
}
}
}
if (exitThread) {
if (wasIdle) {
--mIdleCount;
}
shutdownThreadOnExit = mThreads.RemoveObject(current);
} else {
PRIntervalTime delta = timeout - (now - idleSince);
LOG(("THRD-P(%p) %s waiting [%d]\n", this, mName.BeginReading(), delta));
mEvents.Wait(delta);
LOG(("THRD-P(%p) done waiting\n", this));
}
} else if (wasIdle) {
wasIdle = false;
--mIdleCount;
}
}
if (event) {
LOG(("THRD-P(%p) %s running [%p]\n", this, mName.BeginReading(), event.get()));
event->Run();
}
} while (!exitThread);
if (listener) {
listener->OnThreadShuttingDown();
}
if (shutdownThreadOnExit) {
ShutdownThread(current);
}
LOG(("THRD-P(%p) leave\n", this));
return NS_OK;
}
NS_IMETHODIMP
nsThreadPool::DispatchFromScript(nsIRunnable* aEvent, uint32_t aFlags)
{
nsCOMPtr<nsIRunnable> event(aEvent);
return Dispatch(event.forget(), aFlags);
}
NS_IMETHODIMP
nsThreadPool::Dispatch(already_AddRefed<nsIRunnable>&& aEvent, uint32_t aFlags)
{
LOG(("THRD-P(%p) dispatch [%p %x]\n", this, /* XXX aEvent*/ nullptr, aFlags));
if (NS_WARN_IF(mShutdown)) {
return NS_ERROR_NOT_AVAILABLE;
}
if (aFlags & DISPATCH_SYNC) {
nsCOMPtr<nsIThread> thread;
nsThreadManager::get()->GetCurrentThread(getter_AddRefs(thread));
if (NS_WARN_IF(!thread)) {
return NS_ERROR_NOT_AVAILABLE;
}
RefPtr<nsThreadSyncDispatch> wrapper =
new nsThreadSyncDispatch(thread, Move(aEvent));
PutEvent(wrapper);
while (wrapper->IsPending()) {
NS_ProcessNextEvent(thread);
}
} else {
NS_ASSERTION(aFlags == NS_DISPATCH_NORMAL, "unexpected dispatch flags");
PutEvent(Move(aEvent));
}
return NS_OK;
}
NS_IMETHODIMP
nsThreadPool::IsOnCurrentThread(bool* aResult)
{
MutexAutoLock lock(mMutex);
if (NS_WARN_IF(mShutdown)) {
return NS_ERROR_NOT_AVAILABLE;
}
nsIThread* thread = NS_GetCurrentThread();
for (uint32_t i = 0; i < static_cast<uint32_t>(mThreads.Count()); ++i) {
if (mThreads[i] == thread) {
*aResult = true;
return NS_OK;
}
}
*aResult = false;
return NS_OK;
}
NS_IMETHODIMP
nsThreadPool::Shutdown()
{
nsCOMArray<nsIThread> threads;
nsCOMPtr<nsIThreadPoolListener> listener;
{
MutexAutoLock lock(mMutex);
mShutdown = true;
mEvents.NotifyAll();
threads.AppendObjects(mThreads);
mThreads.Clear();
// Swap in a null listener so that we release the listener at the end of
// this method. The listener will be kept alive as long as the other threads
// that were created when it was set.
mListener.swap(listener);
}
// It's important that we shutdown the threads while outside the event queue
// monitor. Otherwise, we could end up dead-locking.
for (int32_t i = 0; i < threads.Count(); ++i) {
threads[i]->Shutdown();
}
return NS_OK;
}
NS_IMETHODIMP
nsThreadPool::GetThreadLimit(uint32_t* aValue)
{
*aValue = mThreadLimit;
return NS_OK;
}
NS_IMETHODIMP
nsThreadPool::SetThreadLimit(uint32_t aValue)
{
MutexAutoLock lock(mMutex);
LOG(("THRD-P(%p) thread limit [%u]\n", this, aValue));
mThreadLimit = aValue;
if (mIdleThreadLimit > mThreadLimit) {
mIdleThreadLimit = mThreadLimit;
}
if (static_cast<uint32_t>(mThreads.Count()) > mThreadLimit) {
mEvents.NotifyAll(); // wake up threads so they observe this change
}
return NS_OK;
}
NS_IMETHODIMP
nsThreadPool::GetIdleThreadLimit(uint32_t* aValue)
{
*aValue = mIdleThreadLimit;
return NS_OK;
}
NS_IMETHODIMP
nsThreadPool::SetIdleThreadLimit(uint32_t aValue)
{
MutexAutoLock lock(mMutex);
LOG(("THRD-P(%p) idle thread limit [%u]\n", this, aValue));
mIdleThreadLimit = aValue;
if (mIdleThreadLimit > mThreadLimit) {
mIdleThreadLimit = mThreadLimit;
}
// Do we need to kill some idle threads?
if (mIdleCount > mIdleThreadLimit) {
mEvents.NotifyAll(); // wake up threads so they observe this change
}
return NS_OK;
}
NS_IMETHODIMP
nsThreadPool::GetIdleThreadTimeout(uint32_t* aValue)
{
*aValue = mIdleThreadTimeout;
return NS_OK;
}
NS_IMETHODIMP
nsThreadPool::SetIdleThreadTimeout(uint32_t aValue)
{
MutexAutoLock lock(mMutex);
uint32_t oldTimeout = mIdleThreadTimeout;
mIdleThreadTimeout = aValue;
// Do we need to notify any idle threads that their sleep time has shortened?
if (mIdleThreadTimeout < oldTimeout && mIdleCount > 0) {
mEvents.NotifyAll(); // wake up threads so they observe this change
}
return NS_OK;
}
NS_IMETHODIMP
nsThreadPool::GetThreadStackSize(uint32_t* aValue)
{
MutexAutoLock lock(mMutex);
*aValue = mStackSize;
return NS_OK;
}
NS_IMETHODIMP
nsThreadPool::SetThreadStackSize(uint32_t aValue)
{
MutexAutoLock lock(mMutex);
mStackSize = aValue;
return NS_OK;
}
NS_IMETHODIMP
nsThreadPool::GetListener(nsIThreadPoolListener** aListener)
{
MutexAutoLock lock(mMutex);
NS_IF_ADDREF(*aListener = mListener);
return NS_OK;
}
NS_IMETHODIMP
nsThreadPool::SetListener(nsIThreadPoolListener* aListener)
{
nsCOMPtr<nsIThreadPoolListener> swappedListener(aListener);
{
MutexAutoLock lock(mMutex);
mListener.swap(swappedListener);
}
return NS_OK;
}
NS_IMETHODIMP
nsThreadPool::SetName(const nsACString& aName)
{
{
MutexAutoLock lock(mMutex);
if (mThreads.Count()) {
return NS_ERROR_NOT_AVAILABLE;
}
}
mName = aName;
return NS_OK;
}