gecko/js/tests/process-logs.sh

218 lines
6.9 KiB
Bash
Executable File

#!/bin/bash -e
# -*- Mode: Shell-script; tab-width: 4; indent-tabs-mode: nil; -*-
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is Mozilla JavaScript Testing Utilities
#
# The Initial Developer of the Original Code is
# Mozilla Corporation.
# Portions created by the Initial Developer are Copyright (C) 2007
# the Initial Developer. All Rights Reserved.
#
# Contributor(s): Bob Clary <bclary@bclary.com>
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
if [[ -z "$TEST_DIR" ]]; then
cat <<EOF
`basename $0`: error
TEST_DIR, the location of the Sisyphus framework,
is required to be set prior to calling this script.
EOF
exit 2
fi
if [[ ! -e $TEST_DIR/bin/library.sh ]]; then
echo "TEST_DIR=$TEST_DIR"
echo ""
echo "This script requires the Sisyphus testing framework. Please "
echo "cvs check out the Sisyphys framework from mozilla/testing/sisyphus"
echo "and set the environment variable TEST_DIR to the directory where it"
echo "located."
echo ""
exit 2
fi
source $TEST_DIR/bin/library.sh
TEST_JSDIR=${TEST_JSDIR:-$TEST_DIR/tests/mozilla.org/js}
usage()
{
cat <<EOF
usage: process-logs.sh.sh -l testlogfiles -A arch -K kernel
variable description
=============== ============================================================
testlogfiles The test log to be processed. If testlogfiles is a file
pattern it must be single quoted to prevent the shell from
expanding it before it is passed to the script.
EOF
exit 2
}
while getopts "l:" optname;
do
case $optname in
l) testlogfiles=$OPTARG;;
esac
done
if [[ -z "$testlogfiles" ]]; then
usage
fi
for testlogfile in `ls $testlogfiles`; do
debug "testlogfile=$testlogfile"
case $testlogfile in
*.log)
worktestlogfile=$testlogfile
;;
*.log.bz2)
worktestlogfile=`mktemp $testlogfile.XXXXXX`
bunzip2 -c $testlogfile > $worktestlogfile
;;
*.log.gz)
worktestlogfile=`mktemp $testlogfile.XXXXXX`
gunzip -c $testlogfile > $worktestlogfile
;;
*)
echo "unknown log type: $f"
exit 2
;;
esac
case "$testlogfile" in
*,js,*) testtype=shell;;
*,firefox,*) testtype=browser;;
*,thunderbird,*) testtype=browser;;
*,fennec,*) testtype=browser;;
*) error "unknown testtype in logfile $testlogfile" $LINENO;;
esac
debug "testtype=$testtype"
case "$testlogfile" in
*,nightly*) buildtype=nightly;;
*,opt,*) buildtype=opt;;
*,debug,*) buildtype=debug;;
*) error "unknown buildtype in logfile $testlogfile" $LINENO;
esac
debug "buildtype=$buildtype"
case "$testlogfile" in
*,1.8.0*) branch=1.8.0;;
*,1.8.1*) branch=1.8.1;;
*,1.9.0*) branch=1.9.0;;
*,1.9.1*) branch=1.9.1;;
*,1.9.2*) branch=1.9.2;;
*)
branch=`grep -m 1 '^environment: TEST_BRANCH=' $worktestlogfile | sed 's|.*TEST_BRANCH=\(.*\)|\1|'`
if [[ -z "$branch" ]]; then
error "unknown branch in logfile $testlogfile" $LINENO
fi
;;
esac
debug "branch=$branch"
repo=`grep -m 1 '^environment: TEST_MOZILLA_HG=' $worktestlogfile | sed 's|.*TEST_MOZILLA_HG=http://hg.mozilla.org.*/\([^\/]*\)|\1|'`
if [[ -z "$repo" ]]; then
repo=CVS
fi
debug "repo=$repo"
case "$testlogfile" in
*,nt,*) OSID=nt;;
*,linux,*) OSID=linux;;
*,darwin,*) OSID=darwin;;
*)
OSID=`grep -m 1 '^environment: OSID=' $worktestlogfile | sed 's|.*OSID=\(.*\)|\1|'`
if [[ -z "$OSID" ]]; then
error "unknown OS in logfile $testlogfile" $LINENO
fi
;;
esac
debug "OSID=$OSID"
kernel=`grep -m 1 '^environment: TEST_KERNEL=' $worktestlogfile | sed 's|.*TEST_KERNEL=\(.*\)|\1|'`
if [[ "$OSID" == "linux" ]]; then
kernel=`echo $kernel | sed 's|\([0-9]*\)\.\([0-9]*\)\.\([0-9]*\).*|\1.\2.\3|'`
fi
debug "kernel=$kernel"
arch=`grep -m 1 '^environment: TEST_PROCESSORTYPE=' $worktestlogfile | sed 's|.*TEST_PROCESSORTYPE=\(.*\)|\1|'`
debug "arch=$arch"
memory=`grep -m 1 '^environment: TEST_MEMORY=' $worktestlogfile | sed 's|.*TEST_MEMORY=\(.*\)|\1|'`
speed=`grep -m 1 '^environment: TEST_CPUSPEED=' $worktestlogfile | sed 's|.*TEST_CPUSPEED=\(.*\)|\1|'`
timezone=`basename $testlogfile | sed 's|^[-0-9]*\([-+]\)\([0-9]\{4,4\}\),.*|\1\2|'`
debug "timezone=$timezone"
jsoptions=`grep -m 1 '^arguments: javascriptoptions=' $worktestlogfile | sed 's|.*javascriptoptions=\(.*\)|\1|'`
if [[ -z "$jsoptions" ]]; then
jsoptions=none
fi
debug "jsoptions=$jsoptions"
outputprefix=$testlogfile
includetests="included-$branch-$testtype-$buildtype.tests"
excludetests="excluded-$branch-$testtype-$buildtype.tests"
grep '^include: ' $worktestlogfile | sed 's|include: ||' > $TEST_DIR/tests/mozilla.org/js/$includetests
grep '^exclude: ' $worktestlogfile | sed 's|exclude: ||' > $TEST_DIR/tests/mozilla.org/js/$excludetests
$TEST_DIR/tests/mozilla.org/js/known-failures.pl \
-b "$branch" \
-T "$buildtype" \
-R "$repo" \
-t "$testtype" \
-o "$OSID" \
-K "$kernel" \
-A "$arch" \
-M "$memory" \
-S "$speed" \
-z "$timezone" \
-J "$jsoptions" \
-r "$TEST_JSDIR/failures.txt" \
-l "$worktestlogfile" \
-O "$outputprefix"
if [[ "$testlogfile" != "$worktestlogfile" ]]; then
rm $worktestlogfile
unset worktestlogfile
fi
done