gecko/nsprpub/pr/tests/select2.c
2008-06-06 08:36:51 -04:00

355 lines
10 KiB
C

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Netscape Portable Runtime (NSPR).
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998-2000
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/***********************************************************************
**
** Name: select2.c
**
** Description: Measure PR_Select and Empty_Select performance.
**
** Modification History:
** 20-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
** The debug mode will print all of the printfs associated with this test.
** The regress mode will be the default mode. Since the regress tool limits
** the output to a one line status:PASS or FAIL,all of the printf statements
** have been handled with an if (debug_mode) statement.
***********************************************************************/
/***********************************************************************
** Includes
***********************************************************************/
/* Used to get the command line option */
#include "plgetopt.h"
#include "prttools.h"
#include "primpl.h"
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#if defined(OS2)
#include <sys/time.h>
#endif
#define PORT 8000
#define DEFAULT_COUNT 10
PRInt32 count;
/***********************************************************************
** PRIVATE FUNCTION: Test_Result
** DESCRIPTION: Used in conjunction with the regress tool, prints out the
** status of the test case.
** INPUTS: PASS/FAIL
** OUTPUTS: None
** RETURN: None
** SIDE EFFECTS:
**
** RESTRICTIONS:
** None
** MEMORY: NA
** ALGORITHM: Determine what the status is and print accordingly.
**
***********************************************************************/
static void Test_Result (int result)
{
switch (result)
{
case PASS:
printf ("PASS\n");
break;
case FAIL:
printf ("FAIL\n");
break;
default:
printf ("NOSTATUS\n");
break;
}
}
static void EmptyPRSelect(void)
{
PRInt32 index = count;
PRInt32 rv;
for (; index--;)
rv = PR_Select(0, NULL, NULL, NULL, PR_INTERVAL_NO_WAIT);
}
static void EmptyNativeSelect(void)
{
PRInt32 rv;
PRInt32 index = count;
struct timeval timeout;
timeout.tv_sec = timeout.tv_usec = 0;
for (; index--;)
rv = select(0, NULL, NULL, NULL, &timeout);
}
static void PRSelectTest(void)
{
PRFileDesc *listenSocket;
PRNetAddr serverAddr;
if ( (listenSocket = PR_NewTCPSocket()) == NULL) {
if (debug_mode) printf("\tServer error creating listen socket\n");
return;
}
memset(&serverAddr, 0, sizeof(PRNetAddr));
serverAddr.inet.family = AF_INET;
serverAddr.inet.port = PR_htons(PORT);
serverAddr.inet.ip = PR_htonl(INADDR_ANY);
if ( PR_Bind(listenSocket, &serverAddr) == PR_FAILURE) {
if (debug_mode) printf("\tServer error binding to server address\n");
PR_Close(listenSocket);
return;
}
if ( PR_Listen(listenSocket, 128) == PR_FAILURE) {
if (debug_mode) printf("\tServer error listening to server socket\n");
PR_Close(listenSocket);
return;
}
if (debug_mode) printf("Listening on port %d\n", PORT);
{
PRFileDesc *newSock;
PRNetAddr rAddr;
PRInt32 loops = 0;
PR_fd_set rdset;
PRInt32 rv;
PRInt32 bytesRead;
char buf[11];
loops++;
if (debug_mode) printf("Going into accept\n");
newSock = PR_Accept(listenSocket,
&rAddr,
PR_INTERVAL_NO_TIMEOUT);
if (newSock) {
if (debug_mode) printf("Got connection!\n");
} else {
if (debug_mode) printf("PR_Accept failed: error code %d\n", PR_GetError());
else Test_Result (FAIL);
}
PR_FD_ZERO(&rdset);
PR_FD_SET(newSock, &rdset);
if (debug_mode) printf("Going into select \n");
rv = PR_Select(0, &rdset, 0, 0, PR_INTERVAL_NO_TIMEOUT);
if (debug_mode) printf("return from select is %d\n", rv);
if (PR_FD_ISSET(newSock, &rdset)) {
if (debug_mode) printf("I can't believe it- the socket is ready okay!\n");
} else {
if (debug_mode) printf("Damn; the select test failed...\n");
else Test_Result (FAIL);
}
strcpy(buf, "XXXXXXXXXX");
bytesRead = PR_Recv(newSock, buf, 10, 0, PR_INTERVAL_NO_TIMEOUT);
buf[10] = '\0';
if (debug_mode) printf("Recv completed with %d bytes, %s\n", bytesRead, buf);
PR_Close(newSock);
}
}
#if defined(XP_UNIX)
static void NativeSelectTest(void)
{
PRFileDesc *listenSocket;
PRNetAddr serverAddr;
if ( (listenSocket = PR_NewTCPSocket()) == NULL) {
if (debug_mode) printf("\tServer error creating listen socket\n");
return;
}
memset(&serverAddr, 0, sizeof(PRNetAddr));
serverAddr.inet.family = AF_INET;
serverAddr.inet.port = PR_htons(PORT);
serverAddr.inet.ip = PR_htonl(INADDR_ANY);
if ( PR_Bind(listenSocket, &serverAddr) == PR_FAILURE) {
if (debug_mode) printf("\tServer error binding to server address\n");
PR_Close(listenSocket);
return;
}
if ( PR_Listen(listenSocket, 128) == PR_FAILURE) {
if (debug_mode) printf("\tServer error listening to server socket\n");
PR_Close(listenSocket);
return;
}
if (debug_mode) printf("Listening on port %d\n", PORT);
{
PRIntn osfd;
char buf[11];
fd_set rdset;
PRNetAddr rAddr;
PRFileDesc *newSock;
struct timeval timeout;
PRInt32 bytesRead, rv, loops = 0;
loops++;
if (debug_mode) printf("Going into accept\n");
newSock = PR_Accept(listenSocket, &rAddr, PR_INTERVAL_NO_TIMEOUT);
if (newSock) {
if (debug_mode) printf("Got connection!\n");
} else {
if (debug_mode) printf("PR_Accept failed: error code %d\n", PR_GetError());
else Test_Result (FAIL);
}
osfd = PR_FileDesc2NativeHandle(newSock);
FD_ZERO(&rdset);
FD_SET(osfd, &rdset);
if (debug_mode) printf("Going into select \n");
timeout.tv_sec = 2; timeout.tv_usec = 0;
rv = select(osfd + 1, &rdset, NULL, NULL, &timeout);
if (debug_mode) printf("return from select is %d\n", rv);
if (FD_ISSET(osfd, &rdset)) {
if (debug_mode)
printf("I can't believe it- the socket is ready okay!\n");
} else {
if (debug_mode) printf("Damn; the select test failed...\n");
else Test_Result (FAIL);
}
strcpy(buf, "XXXXXXXXXX");
bytesRead = PR_Recv(newSock, buf, 10, 0, PR_INTERVAL_NO_TIMEOUT);
buf[10] = '\0';
if (debug_mode) printf("Recv completed with %d bytes, %s\n", bytesRead, buf);
PR_Close(newSock);
}
} /* NativeSelectTest */
#endif /* defined(XP_UNIX) */
/************************************************************************/
static void Measure(void (*func)(void), const char *msg)
{
PRIntervalTime start, stop;
double d;
PRInt32 tot;
start = PR_IntervalNow();
(*func)();
stop = PR_IntervalNow();
d = (double)PR_IntervalToMicroseconds(stop - start);
tot = PR_IntervalToMilliseconds(stop-start);
if (debug_mode) printf("%40s: %6.2f usec avg, %d msec total\n", msg, d / count, tot);
}
void main(int argc, char **argv)
{
/* The command line argument: -d is used to determine if the test is being run
in debug mode. The regress tool requires only one line output:PASS or FAIL.
All of the printfs associated with this test has been handled with a if (debug_mode)
test.
Usage: test_name -d
*/
PLOptStatus os;
PLOptState *opt = PL_CreateOptState(argc, argv, "d:");
while (PL_OPT_EOL != (os = PL_GetNextOpt(opt)))
{
if (PL_OPT_BAD == os) continue;
switch (opt->option)
{
case 'd': /* debug mode */
debug_mode = 1;
break;
default:
break;
}
}
PL_DestroyOptState(opt);
/* main test */
PR_Init(PR_USER_THREAD, PR_PRIORITY_NORMAL, 0);
PR_STDIO_INIT();
if (argc > 2) {
count = atoi(argv[2]);
} else {
count = DEFAULT_COUNT;
}
#if defined(XP_UNIX)
Measure(NativeSelectTest, "time to call 1 element select()");
#endif
Measure(EmptyPRSelect, "time to call Empty PR_select()");
Measure(EmptyNativeSelect, "time to call Empty select()");
Measure(PRSelectTest, "time to call 1 element PR_select()");
if (!debug_mode) Test_Result (NOSTATUS);
PR_Cleanup();
}