wine/gecko
0
0
Fork 0
mirror of https://gitlab.winehq.org/wine/wine-gecko.git synced 2024-09-13 09:24:08 -07:00
Code Issues Packages Projects Releases Wiki Activity
801e892aa5
gecko/layout/generic/nsColumnSetFrame.cpp

1085 lines
41 KiB
C++
Raw Blame History

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Robert O'Callahan <roc@ocallahan.org>
*
* Alternatively, the contents of this file may be used under the terms of
* either of the GNU General Public License Version 2 or later (the "GPL"),
* or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/* rendering object for css3 multi-column layout */
#include "nsHTMLContainerFrame.h"
#include "nsIContent.h"
#include "nsIFrame.h"
#include "nsISupports.h"
#include "nsIAtom.h"
#include "nsPresContext.h"
#include "nsHTMLParts.h"
#include "nsGkAtoms.h"
#include "nsStyleConsts.h"
#include "nsCOMPtr.h"
#include "nsLayoutUtils.h"
#include "nsDisplayList.h"
#include "nsCSSRendering.h"
class nsColumnSetFrame : public nsHTMLContainerFrame {
public:
nsColumnSetFrame(nsStyleContext* aContext);
NS_IMETHOD SetInitialChildList(nsIAtom* aListName,
nsIFrame* aChildList);
NS_IMETHOD Reflow(nsPresContext* aPresContext,
nsHTMLReflowMetrics& aDesiredSize,
const nsHTMLReflowState& aReflowState,
nsReflowStatus& aStatus);
NS_IMETHOD AppendFrames(nsIAtom* aListName,
nsIFrame* aFrameList);
NS_IMETHOD InsertFrames(nsIAtom* aListName,
nsIFrame* aPrevFrame,
nsIFrame* aFrameList);
NS_IMETHOD RemoveFrame(nsIAtom* aListName,
nsIFrame* aOldFrame);
virtual nscoord GetMinWidth(nsIRenderingContext *aRenderingContext);
virtual nscoord GetPrefWidth(nsIRenderingContext *aRenderingContext);
virtual nsIFrame* GetContentInsertionFrame() {
nsIFrame* frame = GetFirstChild(nsnull);
// if no children return nsnull
if (!frame)
return nsnull;
return frame->GetContentInsertionFrame();
}
virtual nsresult StealFrame(nsPresContext* aPresContext,
nsIFrame* aChild,
PRBool aForceNormal)
{ // nsColumnSetFrame keeps overflow containers in main child list
return nsContainerFrame::StealFrame(aPresContext, aChild, PR_TRUE);
}
NS_IMETHOD BuildDisplayList(nsDisplayListBuilder* aBuilder,
const nsRect& aDirtyRect,
const nsDisplayListSet& aLists);
virtual nsIAtom* GetType() const;
virtual void PaintColumnRule(nsIRenderingContext* aCtx,
const nsRect& aDirtyRect,
const nsPoint& aPt);
#ifdef DEBUG
NS_IMETHOD GetFrameName(nsAString& aResult) const {
return MakeFrameName(NS_LITERAL_STRING("ColumnSet"), aResult);
}
#endif
protected:
nscoord mLastBalanceHeight;
nsReflowStatus mLastFrameStatus;
virtual PRIntn GetSkipSides() const;
/**
* These are the parameters that control the layout of columns.
*/
struct ReflowConfig {
PRInt32 mBalanceColCount;
nscoord mColWidth;
nscoord mExpectedWidthLeftOver;
nscoord mColGap;
nscoord mColMaxHeight;
};
/**
* Some data that is better calculated during reflow
*/
struct ColumnBalanceData {
// The maximum "content height" of any column
nscoord mMaxHeight;
// The sum of the "content heights" for all columns
nscoord mSumHeight;
// The "content height" of the last column
nscoord mLastHeight;
// The maximum "content height" of all columns that overflowed
// their available height
nscoord mMaxOverflowingHeight;
void Reset() {
mMaxHeight = mSumHeight = mLastHeight = mMaxOverflowingHeight = 0;
}
};
/**
* Similar to nsBlockFrame::DrainOverflowLines. Locate any columns not
* handled by our prev-in-flow, and any columns sitting on our own
* overflow list, and put them in our primary child list for reflowing.
*/
void DrainOverflowColumns();
/**
* The basic reflow strategy is to call this function repeatedly to
* obtain specific parameters that determine the layout of the
* columns. This function will compute those parameters from the CSS
* style. This function will also be responsible for implementing
* the state machine that controls column balancing.
*/
ReflowConfig ChooseColumnStrategy(const nsHTMLReflowState& aReflowState);
/**
* Reflow column children. Returns PR_TRUE iff the content that was reflowed
* fit into the mColMaxHeight.
*/
PRBool ReflowChildren(nsHTMLReflowMetrics& aDesiredSize,
const nsHTMLReflowState& aReflowState,
nsReflowStatus& aStatus,
const ReflowConfig& aConfig,
PRBool aLastColumnUnbounded,
nsCollapsingMargin* aCarriedOutBottomMargin,
ColumnBalanceData& aColData);
};
/**
* Tracking issues:
*
* XXX cursor movement around the top and bottom of colums seems to make the editor
* lose the caret.
*
* XXX should we support CSS columns applied to table elements?
*/
nsIFrame*
NS_NewColumnSetFrame(nsIPresShell* aPresShell, nsStyleContext* aContext, PRUint32 aStateFlags)
{
nsColumnSetFrame* it = new (aPresShell) nsColumnSetFrame(aContext);
if (it) {
// set the state flags (if any are provided)
it->AddStateBits(aStateFlags);
}
return it;
}
nsColumnSetFrame::nsColumnSetFrame(nsStyleContext* aContext)
: nsHTMLContainerFrame(aContext), mLastBalanceHeight(NS_INTRINSICSIZE),
mLastFrameStatus(NS_FRAME_COMPLETE)
{
}
nsIAtom*
nsColumnSetFrame::GetType() const
{
return nsGkAtoms::columnSetFrame;
}
static void
PaintColumnRule(nsIFrame* aFrame, nsIRenderingContext* aCtx,
const nsRect& aDirtyRect, nsPoint aPt)
{
static_cast<nsColumnSetFrame*>(aFrame)->PaintColumnRule(aCtx, aDirtyRect, aPt);
}
void
nsColumnSetFrame::PaintColumnRule(nsIRenderingContext* aCtx,
const nsRect& aDirtyRect,
const nsPoint& aPt)
{
nsIFrame* child = mFrames.FirstChild();
if (!child)
return; // no columns
nsIFrame* nextSibling = child->GetNextSibling();
if (!nextSibling)
return; // 1 column only - this means no gap to draw on
PRBool isRTL = GetStyleVisibility()->mDirection == NS_STYLE_DIRECTION_RTL;
const nsStyleColumn* colStyle = GetStyleColumn();
PRUint8 ruleStyle;
// Per spec, inset => ridge and outset => groove
if (colStyle->mColumnRuleStyle == NS_STYLE_BORDER_STYLE_INSET)
ruleStyle = NS_STYLE_BORDER_STYLE_RIDGE;
else if (colStyle->mColumnRuleStyle == NS_STYLE_BORDER_STYLE_OUTSET)
ruleStyle = NS_STYLE_BORDER_STYLE_GROOVE;
else
ruleStyle = colStyle->mColumnRuleStyle;
nsPresContext* presContext = PresContext();
nscoord ruleWidth = colStyle->GetComputedColumnRuleWidth();
if (!ruleWidth)
return;
nscolor ruleColor;
if (colStyle->mColumnRuleColorIsForeground)
ruleColor = GetStyleColor()->mColor;
else
ruleColor = colStyle->mColumnRuleColor;
// In order to re-use a large amount of code, we treat the column rule as a border.
// We create a new border style object and fill in all the details of the column rule as
// the left border. PaintBorder() does all the rendering for us, so we not
// only save an enormous amount of code but we'll support all the line styles that
// we support on borders!
nsStyleBorder border(presContext);
border.SetBorderWidth(NS_SIDE_LEFT, ruleWidth);
border.SetBorderStyle(NS_SIDE_LEFT, ruleStyle);
border.SetBorderColor(NS_SIDE_LEFT, ruleColor);
// Get our content rect as an absolute coordinate, not relative to
// our parent (which is what the X and Y normally is)
nsRect contentRect = GetContentRect() - GetRect().TopLeft() + aPt;
nsSize ruleSize(ruleWidth, contentRect.height);
while (nextSibling) {
// The frame tree goes RTL in RTL
nsIFrame* leftSibling = isRTL ? nextSibling : child;
nsIFrame* rightSibling = isRTL ? child : nextSibling;
// Each child frame's position coordinates is actually relative to this nsColumnSetFrame.
// linePt will be at the top-left edge to paint the line.
nsPoint edgeOfLeftSibling = leftSibling->GetRect().TopRight() + aPt;
nsPoint edgeOfRightSibling = rightSibling->GetRect().TopLeft() + aPt;
nsPoint linePt((edgeOfLeftSibling.x + edgeOfRightSibling.x - ruleWidth) / 2,
contentRect.y);
nsRect lineRect(linePt, ruleSize);
nsCSSRendering::PaintBorder(presContext, *aCtx, this, aDirtyRect,
lineRect, border, GetStyleContext(),
// Remember, we only have the "left" "border". Skip everything else
(1 << NS_SIDE_TOP | 1 << NS_SIDE_RIGHT | 1 << NS_SIDE_BOTTOM));
child = nextSibling;
nextSibling = nextSibling->GetNextSibling();
}
}
NS_IMETHODIMP
nsColumnSetFrame::SetInitialChildList(nsIAtom* aListName,
nsIFrame* aChildList)
{
NS_ASSERTION(!aListName, "Only default child list supported");
NS_ASSERTION(aChildList && !aChildList->GetNextSibling(),
"initial child list must have exactly one child");
// Queue up the frames for the content frame
return nsHTMLContainerFrame::SetInitialChildList(nsnull, aChildList);
}
static nscoord
GetAvailableContentWidth(const nsHTMLReflowState& aReflowState)
{
if (aReflowState.availableWidth == NS_INTRINSICSIZE) {
return NS_INTRINSICSIZE;
}
nscoord borderPaddingWidth =
aReflowState.mComputedBorderPadding.left +
aReflowState.mComputedBorderPadding.right;
return PR_MAX(0, aReflowState.availableWidth - borderPaddingWidth);
}
static nscoord
GetAvailableContentHeight(const nsHTMLReflowState& aReflowState)
{
if (aReflowState.availableHeight == NS_INTRINSICSIZE) {
return NS_INTRINSICSIZE;
}
nscoord borderPaddingHeight =
aReflowState.mComputedBorderPadding.top +
aReflowState.mComputedBorderPadding.bottom;
return PR_MAX(0, aReflowState.availableHeight - borderPaddingHeight);
}
static nscoord
GetColumnGap(nsColumnSetFrame* aFrame,
const nsStyleColumn* aColStyle)
{
if (eStyleUnit_Normal == aColStyle->mColumnGap.GetUnit())
return aFrame->GetStyleFont()->mFont.size;
if (eStyleUnit_Coord == aColStyle->mColumnGap.GetUnit()) {
nscoord colGap = aColStyle->mColumnGap.GetCoordValue();
NS_ASSERTION(colGap >= 0, "negative column gap");
return colGap;
}
NS_NOTREACHED("Unknown gap type");
return 0;
}
nsColumnSetFrame::ReflowConfig
nsColumnSetFrame::ChooseColumnStrategy(const nsHTMLReflowState& aReflowState)
{
const nsStyleColumn* colStyle = GetStyleColumn();
nscoord availContentWidth = GetAvailableContentWidth(aReflowState);
if (aReflowState.ComputedWidth() != NS_INTRINSICSIZE) {
availContentWidth = aReflowState.ComputedWidth();
}
nscoord colHeight = GetAvailableContentHeight(aReflowState);
if (aReflowState.ComputedHeight() != NS_INTRINSICSIZE) {
colHeight = aReflowState.ComputedHeight();
}
nscoord colGap = GetColumnGap(this, colStyle);
PRInt32 numColumns = colStyle->mColumnCount;
nscoord colWidth;
if (colStyle->mColumnWidth.GetUnit() == eStyleUnit_Coord) {
colWidth = colStyle->mColumnWidth.GetCoordValue();
NS_ASSERTION(colWidth >= 0, "negative column width");
// Reduce column count if necessary to make columns fit in the
// available width. Compute max number of columns that fit in
// availContentWidth, satisfying colGap*(maxColumns - 1) +
// colWidth*maxColumns <= availContentWidth
if (availContentWidth != NS_INTRINSICSIZE && colGap + colWidth > 0
&& numColumns > 0) {
// This expression uses truncated rounding, which is what we
// want
PRInt32 maxColumns = (availContentWidth + colGap)/(colGap + colWidth);
numColumns = PR_MAX(1, PR_MIN(numColumns, maxColumns));
}
} else if (numColumns > 0 && availContentWidth != NS_INTRINSICSIZE) {
nscoord widthMinusGaps = availContentWidth - colGap*(numColumns - 1);
colWidth = widthMinusGaps/numColumns;
} else {
colWidth = NS_INTRINSICSIZE;
}
// Take care of the situation where there's only one column but it's
// still too wide
colWidth = PR_MAX(1, PR_MIN(colWidth, availContentWidth));
nscoord expectedWidthLeftOver = 0;
if (colWidth != NS_INTRINSICSIZE && availContentWidth != NS_INTRINSICSIZE) {
// distribute leftover space
// First, determine how many columns will be showing if the column
// count is auto
if (numColumns <= 0) {
// choose so that colGap*(nominalColumnCount - 1) +
// colWidth*nominalColumnCount is nearly availContentWidth
// make sure to round down
if (colGap + colWidth > 0) {
numColumns = (availContentWidth + colGap)/(colGap + colWidth);
}
if (numColumns <= 0) {
numColumns = 1;
}
}
// Compute extra space and divide it among the columns
nscoord extraSpace =
PR_MAX(0, availContentWidth - (colWidth*numColumns + colGap*(numColumns - 1)));
nscoord extraToColumns = extraSpace/numColumns;
colWidth += extraToColumns;
expectedWidthLeftOver = extraSpace - (extraToColumns*numColumns);
}
// NOTE that the non-balancing behavior for non-auto computed height
// is not in the CSS3 columns draft as of 18 January 2001
if (aReflowState.ComputedHeight() == NS_INTRINSICSIZE) {
// Balancing!
if (numColumns <= 0) {
// Hmm, auto column count, column width or available width is unknown,
// and balancing is required. Let's just use one column then.
numColumns = 1;
}
colHeight = PR_MIN(mLastBalanceHeight, GetAvailableContentHeight(aReflowState));
} else {
// No balancing, so don't limit the column count
numColumns = PR_INT32_MAX;
}
#ifdef DEBUG_roc
printf("*** nsColumnSetFrame::ChooseColumnStrategy: numColumns=%d, colWidth=%d, expectedWidthLeftOver=%d, colHeight=%d, colGap=%d\n",
numColumns, colWidth, expectedWidthLeftOver, colHeight, colGap);
#endif
ReflowConfig config = { numColumns, colWidth, expectedWidthLeftOver, colGap, colHeight };
return config;
}
// XXX copied from nsBlockFrame, should this be moved to nsContainerFrame?
static void
PlaceFrameView(nsIFrame* aFrame)
{
if (aFrame->HasView())
nsContainerFrame::PositionFrameView(aFrame);
else
nsContainerFrame::PositionChildViews(aFrame);
}
static void MoveChildTo(nsIFrame* aParent, nsIFrame* aChild, nsPoint aOrigin) {
if (aChild->GetPosition() == aOrigin) {
return;
}
nsRect r = aChild->GetOverflowRect();
r += aChild->GetPosition();
aParent->Invalidate(r);
r -= aChild->GetPosition();
aChild->SetPosition(aOrigin);
r += aOrigin;
aParent->Invalidate(r);
PlaceFrameView(aChild);
}
nscoord
nsColumnSetFrame::GetMinWidth(nsIRenderingContext *aRenderingContext) {
nscoord width = 0;
if (mFrames.FirstChild()) {
width = mFrames.FirstChild()->GetMinWidth(aRenderingContext);
}
const nsStyleColumn* colStyle = GetStyleColumn();
nscoord colWidth;
if (colStyle->mColumnWidth.GetUnit() == eStyleUnit_Coord) {
colWidth = colStyle->mColumnWidth.GetCoordValue();
// As available width reduces to zero, we reduce our number of columns
// to one, and don't enforce the column width, so just return the min
// of the child's min-width with any specified column width.
width = PR_MIN(width, colWidth);
} else {
NS_ASSERTION(colStyle->mColumnCount > 0,
"column-count and column-width can't both be auto");
// As available width reduces to zero, we still have mColumnCount columns,
// so multiply the child's min-width by the number of columns.
colWidth = width;
width *= colStyle->mColumnCount;
// The multiplication above can make 'width' negative (integer overflow),
// so use PR_MAX to protect against that.
width = PR_MAX(width, colWidth);
}
// XXX count forced column breaks here? Maybe we should return the child's
// min-width times the minimum number of columns.
return width;
}
nscoord
nsColumnSetFrame::GetPrefWidth(nsIRenderingContext *aRenderingContext) {
// Our preferred width is our desired column width, if specified, otherwise
// the child's preferred width, times the number of columns, plus the width
// of any required column gaps
// XXX what about forced column breaks here?
const nsStyleColumn* colStyle = GetStyleColumn();
nscoord colGap = GetColumnGap(this, colStyle);
nscoord colWidth;
if (colStyle->mColumnWidth.GetUnit() == eStyleUnit_Coord) {
colWidth = colStyle->mColumnWidth.GetCoordValue();
} else if (mFrames.FirstChild()) {
colWidth = mFrames.FirstChild()->GetPrefWidth(aRenderingContext);
} else {
colWidth = 0;
}
PRInt32 numColumns = colStyle->mColumnCount;
if (numColumns <= 0) {
// if column-count is auto, assume one column
numColumns = 1;
}
nscoord width = colWidth*numColumns + colGap*(numColumns - 1);
// The multiplication above can make 'width' negative (integer overflow),
// so use PR_MAX to protect against that.
return PR_MAX(width, colWidth);
}
PRBool
nsColumnSetFrame::ReflowChildren(nsHTMLReflowMetrics& aDesiredSize,
const nsHTMLReflowState& aReflowState,
nsReflowStatus& aStatus,
const ReflowConfig& aConfig,
PRBool aUnboundedLastColumn,
nsCollapsingMargin* aBottomMarginCarriedOut,
ColumnBalanceData& aColData)
{
aColData.Reset();
PRBool allFit = PR_TRUE;
PRBool RTL = GetStyleVisibility()->mDirection == NS_STYLE_DIRECTION_RTL;
PRBool shrinkingHeightOnly = !NS_SUBTREE_DIRTY(this) &&
mLastBalanceHeight > aConfig.mColMaxHeight;
#ifdef DEBUG_roc
printf("*** Doing column reflow pass: mLastBalanceHeight=%d, mColMaxHeight=%d, RTL=%d\n, mBalanceColCount=%d, mColWidth=%d, mColGap=%d\n",
mLastBalanceHeight, aConfig.mColMaxHeight, RTL, aConfig.mBalanceColCount,
aConfig.mColWidth, aConfig.mColGap);
#endif
DrainOverflowColumns();
if (mLastBalanceHeight != aConfig.mColMaxHeight) {
mLastBalanceHeight = aConfig.mColMaxHeight;
// XXX Seems like this could fire if incremental reflow pushed the column set
// down so we reflow incrementally with a different available height.
// We need a way to do an incremental reflow and be sure availableHeight
// changes are taken account of! Right now I think block frames with absolute
// children might exit early.
//NS_ASSERTION(aKidReason != eReflowReason_Incremental,
// "incremental reflow should not have changed the balance height");
}
// get our border and padding
const nsMargin &borderPadding = aReflowState.mComputedBorderPadding;
nsRect contentRect(0, 0, 0, 0);
nsRect overflowRect(0, 0, 0, 0);
nsIFrame* child = mFrames.FirstChild();
nsPoint childOrigin = nsPoint(borderPadding.left, borderPadding.top);
// For RTL, figure out where the last column's left edge should be. Since the
// columns might not fill the frame exactly, we need to account for the
// slop. Otherwise we'll waste time moving the columns by some tiny
// amount unnecessarily.
nscoord targetX = borderPadding.left;
if (RTL) {
nscoord availWidth = aReflowState.availableWidth;
if (aReflowState.ComputedWidth() != NS_INTRINSICSIZE) {
availWidth = aReflowState.ComputedWidth();
}
if (availWidth != NS_INTRINSICSIZE) {
childOrigin.x += availWidth - aConfig.mColWidth;
targetX += aConfig.mExpectedWidthLeftOver;
#ifdef DEBUG_roc
printf("*** childOrigin.x = %d\n", childOrigin.x);
#endif
}
}
int columnCount = 0;
int contentBottom = 0;
PRBool reflowNext = PR_FALSE;
while (child) {
// Try to skip reflowing the child. We can't skip if the child is dirty. We also can't
// skip if the next column is dirty, because the next column's first line(s)
// might be pullable back to this column. We can't skip if it's the last child
// because we need to obtain the bottom margin. We can't skip
// if this is the last column and we're supposed to assign unbounded
// height to it, because that could change the available height from
// the last time we reflowed it and we should try to pull all the
// content from its next sibling. (Note that it might be the last
// column, but not be the last child because the desired number of columns
// has changed.)
PRBool skipIncremental = !(GetStateBits() & NS_FRAME_IS_DIRTY)
&& !NS_SUBTREE_DIRTY(child)
&& child->GetNextSibling()
&& !(aUnboundedLastColumn && columnCount == aConfig.mBalanceColCount - 1)
&& !NS_SUBTREE_DIRTY(child->GetNextSibling());
// If we need to pull up content from the prev-in-flow then this is not just
// a height shrink. The prev in flow will have set the dirty bit.
// Check the overflow rect YMost instead of just the child's content height. The child
// may have overflowing content that cares about the available height boundary.
// (It may also have overflowing content that doesn't care about the available height
// boundary, but if so, too bad, this optimization is defeated.)
PRBool skipResizeHeightShrink = shrinkingHeightOnly
&& child->GetOverflowRect().YMost() <= aConfig.mColMaxHeight;
nscoord childContentBottom = 0;
if (!reflowNext && (skipIncremental || skipResizeHeightShrink)) {
// This child does not need to be reflowed, but we may need to move it
MoveChildTo(this, child, childOrigin);
// If this is the last frame then make sure we get the right status
nsIFrame* kidNext = child->GetNextSibling();
if (kidNext) {
aStatus = (kidNext->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER)
? NS_FRAME_OVERFLOW_INCOMPLETE
: NS_FRAME_NOT_COMPLETE;
} else {
aStatus = mLastFrameStatus;
}
childContentBottom = nsLayoutUtils::CalculateContentBottom(child);
#ifdef DEBUG_roc
printf("*** Skipping child #%d %p (incremental %d, resize height shrink %d): status = %d\n",
columnCount, (void*)child, skipIncremental, skipResizeHeightShrink, aStatus);
#endif
} else {
nsSize availSize(aConfig.mColWidth, aConfig.mColMaxHeight);
if (aUnboundedLastColumn && columnCount == aConfig.mBalanceColCount - 1) {
availSize.height = GetAvailableContentHeight(aReflowState);
}
if (reflowNext)
child->AddStateBits(NS_FRAME_IS_DIRTY);
nsHTMLReflowState kidReflowState(PresContext(), aReflowState, child,
availSize, availSize.width,
aReflowState.ComputedHeight());
kidReflowState.mFlags.mIsTopOfPage = PR_TRUE;
kidReflowState.mFlags.mTableIsSplittable = PR_FALSE;
#ifdef DEBUG_roc
printf("*** Reflowing child #%d %p: availHeight=%d\n",
columnCount, (void*)child,availSize.height);
#endif
// Note if the column's next in flow is not being changed by this incremental reflow.
// This may allow the current column to avoid trying to pull lines from the next column.
if (child->GetNextSibling() &&
!(GetStateBits() & NS_FRAME_IS_DIRTY) &&
!(child->GetNextSibling()->GetStateBits() & NS_FRAME_IS_DIRTY)) {
kidReflowState.mFlags.mNextInFlowUntouched = PR_TRUE;
}
nsHTMLReflowMetrics kidDesiredSize(aDesiredSize.mFlags);
// XXX it would be cool to consult the float manager for the
// previous block to figure out the region of floats from the
// previous column that extend into this column, and subtract
// that region from the new float manager. So you could stick a
// really big float in the first column and text in following
// columns would flow around it.
// Reflow the frame
ReflowChild(child, PresContext(), kidDesiredSize, kidReflowState,
childOrigin.x + kidReflowState.mComputedMargin.left,
childOrigin.y + kidReflowState.mComputedMargin.top,
0, aStatus);
reflowNext = (aStatus & NS_FRAME_REFLOW_NEXTINFLOW) != 0;
#ifdef DEBUG_roc
printf("*** Reflowed child #%d %p: status = %d, desiredSize=%d,%d\n",
columnCount, (void*)child, aStatus, kidDesiredSize.width, kidDesiredSize.height);
#endif
NS_FRAME_TRACE_REFLOW_OUT("Column::Reflow", aStatus);
*aBottomMarginCarriedOut = kidDesiredSize.mCarriedOutBottomMargin;
FinishReflowChild(child, PresContext(), &kidReflowState,
kidDesiredSize, childOrigin.x, childOrigin.y, 0);
childContentBottom = nsLayoutUtils::CalculateContentBottom(child);
if (childContentBottom > aConfig.mColMaxHeight) {
allFit = PR_FALSE;
}
if (childContentBottom > availSize.height) {
aColData.mMaxOverflowingHeight = PR_MAX(childContentBottom,
aColData.mMaxOverflowingHeight);
}
}
contentRect.UnionRect(contentRect, child->GetRect());
ConsiderChildOverflow(overflowRect, child);
contentBottom = PR_MAX(contentBottom, childContentBottom);
aColData.mLastHeight = childContentBottom;
aColData.mSumHeight += childContentBottom;
// Build a continuation column if necessary
nsIFrame* kidNextInFlow = child->GetNextInFlow();
if (NS_FRAME_IS_FULLY_COMPLETE(aStatus) && !NS_FRAME_IS_TRUNCATED(aStatus)) {
NS_ASSERTION(!kidNextInFlow, "next in flow should have been deleted");
break;
} else {
++columnCount;
// Make sure that the column has a next-in-flow. If not, we must
// create one to hold the overflowing stuff, even if we're just
// going to put it on our overflow list and let *our*
// next in flow handle it.
if (!kidNextInFlow) {
NS_ASSERTION(aStatus & NS_FRAME_REFLOW_NEXTINFLOW,
"We have to create a continuation, but the block doesn't want us to reflow it?");
// We need to create a continuing column
nsresult rv = CreateNextInFlow(PresContext(), this, child, kidNextInFlow);
if (NS_FAILED(rv)) {
NS_NOTREACHED("Couldn't create continuation");
break;
}
}
// Make sure we reflow a next-in-flow when it switches between being
// normal or overflow container
if (NS_FRAME_OVERFLOW_IS_INCOMPLETE(aStatus)) {
if (!(kidNextInFlow->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER)) {
aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
reflowNext = PR_TRUE;
kidNextInFlow->AddStateBits(NS_FRAME_IS_OVERFLOW_CONTAINER);
}
}
else if (kidNextInFlow->GetStateBits() & NS_FRAME_IS_OVERFLOW_CONTAINER) {
aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
reflowNext = PR_TRUE;
kidNextInFlow->RemoveStateBits(NS_FRAME_IS_OVERFLOW_CONTAINER);
}
if (columnCount >= aConfig.mBalanceColCount) {
// No more columns allowed here. Stop.
aStatus |= NS_FRAME_REFLOW_NEXTINFLOW;
kidNextInFlow->AddStateBits(NS_FRAME_IS_DIRTY);
// Move any of our leftover columns to our overflow list. Our
// next-in-flow will eventually pick them up.
nsIFrame* continuationColumns = child->GetNextSibling();
if (continuationColumns) {
SetOverflowFrames(PresContext(), continuationColumns);
child->SetNextSibling(nsnull);
}
break;
}
}
// Advance to the next column
child = child->GetNextSibling();
if (child) {
if (!RTL) {
childOrigin.x += aConfig.mColWidth + aConfig.mColGap;
} else {
childOrigin.x -= aConfig.mColWidth + aConfig.mColGap;
}
#ifdef DEBUG_roc
printf("*** NEXT CHILD ORIGIN.x = %d\n", childOrigin.x);
#endif
}
}
// If we're doing RTL, we need to make sure our last column is at the left-hand side of the frame.
if (RTL && childOrigin.x != targetX) {
overflowRect = nsRect(0, 0, 0, 0);
contentRect = nsRect(0, 0, 0, 0);
PRInt32 deltaX = targetX - childOrigin.x;
#ifdef DEBUG_roc
printf("*** CHILDORIGIN.x = %d, targetX = %d, DELTAX = %d\n", childOrigin.x, targetX, deltaX);
#endif
for (child = mFrames.FirstChild(); child; child = child->GetNextSibling()) {
MoveChildTo(this, child, child->GetPosition() + nsPoint(deltaX, 0));
ConsiderChildOverflow(overflowRect, child);
contentRect.UnionRect(contentRect, child->GetRect());
}
}
aColData.mMaxHeight = contentBottom;
contentRect.height = PR_MAX(contentRect.height, contentBottom);
mLastFrameStatus = aStatus;
// contentRect included the borderPadding.left,borderPadding.top of the child rects
contentRect -= nsPoint(borderPadding.left, borderPadding.top);
nsSize contentSize = nsSize(contentRect.XMost(), contentRect.YMost());
// Apply computed and min/max values
if (aReflowState.ComputedHeight() != NS_INTRINSICSIZE) {
contentSize.height = aReflowState.ComputedHeight();
} else {
if (NS_UNCONSTRAINEDSIZE != aReflowState.mComputedMaxHeight) {
contentSize.height = PR_MIN(aReflowState.mComputedMaxHeight, contentSize.height);
}
if (NS_UNCONSTRAINEDSIZE != aReflowState.mComputedMinHeight) {
contentSize.height = PR_MAX(aReflowState.mComputedMinHeight, contentSize.height);
}
}
if (aReflowState.ComputedWidth() != NS_INTRINSICSIZE) {
contentSize.width = aReflowState.ComputedWidth();
} else {
if (NS_UNCONSTRAINEDSIZE != aReflowState.mComputedMaxWidth) {
contentSize.width = PR_MIN(aReflowState.mComputedMaxWidth, contentSize.width);
}
if (NS_UNCONSTRAINEDSIZE != aReflowState.mComputedMinWidth) {
contentSize.width = PR_MAX(aReflowState.mComputedMinWidth, contentSize.width);
}
}
aDesiredSize.height = borderPadding.top + contentSize.height +
borderPadding.bottom;
aDesiredSize.width = contentSize.width + borderPadding.left + borderPadding.right;
overflowRect.UnionRect(overflowRect, nsRect(0, 0, aDesiredSize.width, aDesiredSize.height));
aDesiredSize.mOverflowArea = overflowRect;
#ifdef DEBUG_roc
printf("*** DONE PASS feasible=%d\n", allFit && NS_FRAME_IS_FULLY_COMPLETE(aStatus)
&& !NS_FRAME_IS_TRUNCATED(aStatus));
#endif
return allFit && NS_FRAME_IS_FULLY_COMPLETE(aStatus)
&& !NS_FRAME_IS_TRUNCATED(aStatus);
}
void
nsColumnSetFrame::DrainOverflowColumns()
{
// First grab the prev-in-flows overflows and reparent them to this
// frame.
nsColumnSetFrame* prev = static_cast<nsColumnSetFrame*>(GetPrevInFlow());
if (prev) {
nsIFrame* overflows = prev->GetOverflowFrames(PresContext(), PR_TRUE);
if (overflows) {
// Make all the frames on the overflow list mine
nsIFrame* lastFrame = nsnull;
for (nsIFrame* f = overflows; f; f = f->GetNextSibling()) {
f->SetParent(this);
// When pushing and pulling frames we need to check for whether any
// views need to be reparented
nsHTMLContainerFrame::ReparentFrameView(PresContext(), f, prev, this);
// Get the next frame
lastFrame = f;
}
NS_ASSERTION(lastFrame, "overflow list was created with no frames");
lastFrame->SetNextSibling(mFrames.FirstChild());
mFrames.SetFrames(overflows);
}
}
// Now pull back our own overflows and append them to our children.
// We don't need to reparent them since we're already their parent.
nsIFrame* overflows = GetOverflowFrames(PresContext(), PR_TRUE);
if (overflows) {
mFrames.AppendFrames(this, overflows);
}
}
NS_IMETHODIMP
nsColumnSetFrame::Reflow(nsPresContext* aPresContext,
nsHTMLReflowMetrics& aDesiredSize,
const nsHTMLReflowState& aReflowState,
nsReflowStatus& aStatus)
{
DO_GLOBAL_REFLOW_COUNT("nsColumnSetFrame");
DISPLAY_REFLOW(aPresContext, this, aReflowState, aDesiredSize, aStatus);
// Initialize OUT parameter
aStatus = NS_FRAME_COMPLETE;
//------------ Handle Incremental Reflow -----------------
ReflowConfig config = ChooseColumnStrategy(aReflowState);
PRBool isBalancing = config.mBalanceColCount < PR_INT32_MAX;
// If balancing, then we allow the last column to grow to unbounded
// height during the first reflow. This gives us a way to estimate
// what the average column height should be, because we can measure
// the heights of all the columns and sum them up. But don't do this
// if we have a next in flow because we don't want to suck all its
// content back here and then have to push it out again!
nsIFrame* nextInFlow = GetNextInFlow();
PRBool unboundedLastColumn = isBalancing && !nextInFlow;
nsCollapsingMargin carriedOutBottomMargin;
ColumnBalanceData colData;
PRBool feasible = ReflowChildren(aDesiredSize, aReflowState,
aStatus, config, unboundedLastColumn, &carriedOutBottomMargin, colData);
if (isBalancing) {
nscoord availableContentHeight = GetAvailableContentHeight(aReflowState);
// Termination of the algorithm below is guaranteed because
// knownFeasibleHeight - knownInfeasibleHeight decreases in every
// iteration.
nscoord knownFeasibleHeight = NS_INTRINSICSIZE;
nscoord knownInfeasibleHeight = 0;
// We set this flag when we detect that we may contain a frame
// that can break anywhere (thus foiling the linear decrease-by-one
// search)
PRBool maybeContinuousBreakingDetected = PR_FALSE;
while (1) {
nscoord lastKnownFeasibleHeight = knownFeasibleHeight;
// Record what we learned from the last reflow
if (feasible) {
// maxHeight is feasible. Also, mLastBalanceHeight is feasible.
knownFeasibleHeight = PR_MIN(knownFeasibleHeight, colData.mMaxHeight);
knownFeasibleHeight = PR_MIN(knownFeasibleHeight, mLastBalanceHeight);
// Furthermore, no height less than the height of the last
// column can ever be feasible. (We might be able to reduce the
// height of a non-last column by moving content to a later column,
// but we can't do that with the last column.)
if (mFrames.GetLength() == config.mBalanceColCount) {
knownInfeasibleHeight = PR_MAX(knownInfeasibleHeight,
colData.mLastHeight - 1);
}
} else {
knownInfeasibleHeight = PR_MAX(knownInfeasibleHeight, mLastBalanceHeight);
// If a column didn't fit in its available height, then its current
// height must be the minimum height for unbreakable content in
// the column, and therefore no smaller height can be feasible.
knownInfeasibleHeight = PR_MAX(knownInfeasibleHeight,
colData.mMaxOverflowingHeight - 1);
if (unboundedLastColumn) {
// The last column is unbounded, so all content got reflowed, so the
// mColMaxHeight is feasible.
knownFeasibleHeight = PR_MIN(knownFeasibleHeight,
colData.mMaxHeight);
}
}
#ifdef DEBUG_roc
printf("*** nsColumnSetFrame::Reflow balancing knownInfeasible=%d knownFeasible=%d\n",
knownInfeasibleHeight, knownFeasibleHeight);
#endif
if (knownInfeasibleHeight >= knownFeasibleHeight - 1) {
// knownFeasibleHeight is where we want to be
break;
}
if (knownInfeasibleHeight >= availableContentHeight) {
break;
}
if (lastKnownFeasibleHeight - knownFeasibleHeight == 1) {
// We decreased the feasible height by one twip only. This could
// indicate that there is a continuously breakable child frame
// that we are crawling through.
maybeContinuousBreakingDetected = PR_TRUE;
}
nscoord nextGuess = (knownFeasibleHeight + knownInfeasibleHeight)/2;
// The constant of 600 twips is arbitrary. It's about two line-heights.
if (knownFeasibleHeight - nextGuess < 600 &&
!maybeContinuousBreakingDetected) {
// We're close to our target, so just try shrinking just the
// minimum amount that will cause one of our columns to break
// differently.
nextGuess = knownFeasibleHeight - 1;
} else if (unboundedLastColumn) {
// Make a guess by dividing that into N columns. Add some slop
// to try to make it on the feasible side. The constant of
// 600 twips is arbitrary. It's about two line-heights.
nextGuess = colData.mSumHeight/config.mBalanceColCount + 600;
// Sanitize it
nextGuess = PR_MIN(PR_MAX(nextGuess, knownInfeasibleHeight + 1),
knownFeasibleHeight - 1);
} else if (knownFeasibleHeight == NS_INTRINSICSIZE) {
// This can happen when we had a next-in-flow so we didn't
// want to do an unbounded height measuring step. Let's just increase
// from the infeasible height by some reasonable amount.
nextGuess = knownInfeasibleHeight*2 + 600;
}
// Don't bother guessing more than our height constraint.
nextGuess = PR_MIN(availableContentHeight, nextGuess);
#ifdef DEBUG_roc
printf("*** nsColumnSetFrame::Reflow balancing choosing next guess=%d\n", nextGuess);
#endif
config.mColMaxHeight = nextGuess;
unboundedLastColumn = PR_FALSE;
AddStateBits(NS_FRAME_IS_DIRTY);
feasible = ReflowChildren(aDesiredSize, aReflowState,
aStatus, config, PR_FALSE,
&carriedOutBottomMargin, colData);
}
if (!feasible) {
// We may need to reflow one more time at the feasible height to
// get a valid layout.
PRBool skip = PR_FALSE;
if (knownInfeasibleHeight >= availableContentHeight) {
config.mColMaxHeight = availableContentHeight;
if (mLastBalanceHeight == availableContentHeight) {
skip = PR_TRUE;
}
} else {
config.mColMaxHeight = knownFeasibleHeight;
}
if (!skip) {
AddStateBits(NS_FRAME_IS_DIRTY);
ReflowChildren(aDesiredSize, aReflowState, aStatus, config,
PR_FALSE, &carriedOutBottomMargin, colData);
}
}
}
CheckInvalidateSizeChange(aDesiredSize);
FinishAndStoreOverflow(&aDesiredSize);
aDesiredSize.mCarriedOutBottomMargin = carriedOutBottomMargin;
NS_FRAME_SET_TRUNCATION(aStatus, aReflowState, aDesiredSize);
NS_ASSERTION(NS_FRAME_IS_COMPLETE(aStatus) ||
aReflowState.availableHeight != NS_UNCONSTRAINEDSIZE,
"Column set should be complete if the available height is unconstrained");
return NS_OK;
}
NS_IMETHODIMP
nsColumnSetFrame::BuildDisplayList(nsDisplayListBuilder* aBuilder,
const nsRect& aDirtyRect,
const nsDisplayListSet& aLists) {
nsresult rv = DisplayBorderBackgroundOutline(aBuilder, aLists);
NS_ENSURE_SUCCESS(rv, rv);
aLists.BorderBackground()->AppendNewToTop(new (aBuilder)
nsDisplayGeneric(this, ::PaintColumnRule, "ColumnRule"));
nsIFrame* kid = mFrames.FirstChild();
// Our children won't have backgrounds so it doesn't matter where we put them.
while (kid) {
nsresult rv = BuildDisplayListForChild(aBuilder, kid, aDirtyRect, aLists);
NS_ENSURE_SUCCESS(rv, rv);
kid = kid->GetNextSibling();
}
return NS_OK;
}
PRIntn
nsColumnSetFrame::GetSkipSides() const
{
return 0;
}
NS_IMETHODIMP
nsColumnSetFrame::AppendFrames(nsIAtom* aListName,
nsIFrame* aFrameList)
{
NS_NOTREACHED("AppendFrames not supported");
return NS_ERROR_NOT_IMPLEMENTED;
}
NS_IMETHODIMP
nsColumnSetFrame::InsertFrames(nsIAtom* aListName,
nsIFrame* aPrevFrame,
nsIFrame* aFrameList)
{
NS_NOTREACHED("InsertFrames not supported");
return NS_ERROR_NOT_IMPLEMENTED;
}
NS_IMETHODIMP
nsColumnSetFrame::RemoveFrame(nsIAtom* aListName,
nsIFrame* aOldFrame)
{
NS_NOTREACHED("RemoveFrame not supported");
return NS_ERROR_NOT_IMPLEMENTED;
}
Reference in New Issue View Git Blame Copy Permalink