gecko/ipc/ril/Ril.cpp

382 lines
10 KiB
C++

/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/* vim: set sw=4 ts=8 et ft=cpp: */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is Mozilla Code.
*
* The Initial Developer of the Original Code is
* The Mozilla Foundation
* Portions created by the Initial Developer are Copyright (C) 2011
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Chris Jones <jones.chris.g@gmail.com>
* Kyle Machulis <kyle@nonpolynomial.com>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include <fcntl.h>
#include <unistd.h>
#include <queue>
#include <sys/socket.h>
#include <sys/un.h>
#include <sys/select.h>
#include <sys/types.h>
#include "base/eintr_wrapper.h"
#include "base/message_loop.h"
#include "mozilla/FileUtils.h"
#include "mozilla/Monitor.h"
#include "mozilla/Util.h"
#include "nsAutoPtr.h"
#include "nsIThread.h"
#include "nsXULAppAPI.h"
#include "Ril.h"
#if defined(MOZ_WIDGET_GONK)
#include <android/log.h>
#define LOG(args...) __android_log_print(ANDROID_LOG_INFO, "Gonk", args)
#else
#define LOG(args...) printf(args);
#endif
#define RIL_SOCKET_NAME "/dev/socket/rilproxy"
using namespace base;
using namespace std;
// Network port to connect to for adb forwarded sockets when doing
// desktop development.
const uint32_t RIL_TEST_PORT = 6200;
namespace mozilla {
namespace ipc {
struct RilClient : public RefCounted<RilClient>,
public MessageLoopForIO::Watcher
{
typedef queue<RilRawData*> RilRawDataQueue;
RilClient() : mSocket(-1)
, mMutex("RilClient.mMutex")
, mBlockedOnWrite(false)
, mCurrentRilRawData(NULL)
, mIOLoop(MessageLoopForIO::current())
{ }
virtual ~RilClient() { }
bool OpenSocket();
virtual void OnFileCanReadWithoutBlocking(int fd);
virtual void OnFileCanWriteWithoutBlocking(int fd);
ScopedClose mSocket;
MessageLoopForIO::FileDescriptorWatcher mReadWatcher;
MessageLoopForIO::FileDescriptorWatcher mWriteWatcher;
nsAutoPtr<RilRawData> mIncoming;
Mutex mMutex;
RilRawDataQueue mOutgoingQ;
bool mBlockedOnWrite;
MessageLoopForIO* mIOLoop;
nsAutoPtr<RilRawData> mCurrentRilRawData;
size_t mCurrentWriteOffset;
};
static RefPtr<RilClient> sClient;
static RefPtr<RilConsumer> sConsumer;
//-----------------------------------------------------------------------------
// This code runs on the IO thread.
//
class RilReconnectTask : public Task {
virtual void Run();
};
void RilReconnectTask::Run() {
if (sClient->OpenSocket()) {
return;
}
sClient->mIOLoop->PostDelayedTask(FROM_HERE, new RilReconnectTask(), 1000);
}
class RilWriteTask : public Task {
virtual void Run();
};
void RilWriteTask::Run() {
sClient->OnFileCanWriteWithoutBlocking(sClient->mSocket.mFd);
}
static void
ConnectToRil(Monitor* aMonitor, bool* aSuccess)
{
MOZ_ASSERT(!sClient);
sClient = new RilClient();
sClient->mIOLoop->PostTask(FROM_HERE, new RilReconnectTask());
*aSuccess = true;
{
MonitorAutoLock lock(*aMonitor);
lock.Notify();
}
// aMonitor may have gone out of scope by now, don't touch it
}
bool
RilClient::OpenSocket()
{
#if defined(MOZ_WIDGET_GONK)
// Using a network socket to test basic functionality
// before we see how this works on the phone.
struct sockaddr_un addr;
socklen_t alen;
size_t namelen;
int err;
memset(&addr, 0, sizeof(addr));
strcpy(addr.sun_path, RIL_SOCKET_NAME);
addr.sun_family = AF_LOCAL;
mSocket.mFd = socket(AF_LOCAL, SOCK_STREAM, 0);
alen = strlen(RIL_SOCKET_NAME) + offsetof(struct sockaddr_un, sun_path) + 1;
#else
struct hostent *hp;
struct sockaddr_in addr;
socklen_t alen;
hp = gethostbyname("localhost");
if (hp == 0) return false;
memset(&addr, 0, sizeof(addr));
addr.sin_family = hp->h_addrtype;
addr.sin_port = htons(RIL_TEST_PORT);
memcpy(&addr.sin_addr, hp->h_addr, hp->h_length);
mSocket.mFd = socket(hp->h_addrtype, SOCK_STREAM, 0);
alen = sizeof(addr);
#endif
if (mSocket.mFd < 0) {
LOG("Cannot create socket for RIL!\n");
return false;
}
if (connect(mSocket.mFd, (struct sockaddr *) &addr, alen) < 0) {
LOG("Cannot open socket for RIL!\n");
close(mSocket.mFd);
return false;
}
// Set close-on-exec bit.
int flags = fcntl(mSocket.mFd, F_GETFD);
if (-1 == flags) {
return false;
}
flags |= FD_CLOEXEC;
if (-1 == fcntl(mSocket.mFd, F_SETFD, flags)) {
return false;
}
// Select non-blocking IO.
if (-1 == fcntl(mSocket.mFd, F_SETFL, O_NONBLOCK)) {
return false;
}
if (!mIOLoop->WatchFileDescriptor(mSocket.mFd,
true,
MessageLoopForIO::WATCH_READ,
&mReadWatcher,
this)) {
return false;
}
LOG("Socket open for RIL\n");
return true;
}
void
RilClient::OnFileCanReadWithoutBlocking(int fd)
{
// Keep reading data until either
//
// - mIncoming is completely read
// If so, sConsumer->MessageReceived(mIncoming.forget())
//
// - mIncoming isn't completely read, but there's no more
// data available on the socket
// If so, break;
MOZ_ASSERT(fd == mSocket.mFd);
while (true) {
if (!mIncoming) {
mIncoming = new RilRawData();
int ret = read(fd, mIncoming->mData, 1024);
if (ret <= 0) {
LOG("Cannot read from network, error %d\n", ret);
// At this point, assume that we can't actually access
// the socket anymore, and start a reconnect loop.
mIncoming.forget();
mReadWatcher.StopWatchingFileDescriptor();
mWriteWatcher.StopWatchingFileDescriptor();
close(mSocket.mFd);
mIOLoop->PostTask(FROM_HERE, new RilReconnectTask());
return;
}
mIncoming->mSize = ret;
sConsumer->MessageReceived(mIncoming.forget());
if (ret < 1024) {
return;
}
}
}
}
void
RilClient::OnFileCanWriteWithoutBlocking(int fd)
{
// Try to write the bytes of mCurrentRilRawData. If all were written, continue.
//
// Otherwise, save the byte position of the next byte to write
// within mCurrentRilRawData, and request another write when the
// system won't block.
//
MOZ_ASSERT(fd == mSocket.mFd);
while (!mOutgoingQ.empty() || mCurrentRilRawData != NULL) {
if(!mCurrentRilRawData) {
mCurrentRilRawData = mOutgoingQ.front();
mOutgoingQ.pop();
mCurrentWriteOffset = 0;
}
const uint8_t *toWrite;
toWrite = mCurrentRilRawData->mData;
while (mCurrentWriteOffset < mCurrentRilRawData->mSize) {
ssize_t write_amount = mCurrentRilRawData->mSize - mCurrentWriteOffset;
ssize_t written;
written = write (fd, toWrite + mCurrentWriteOffset,
write_amount);
if(written > 0) {
mCurrentWriteOffset += written;
}
if (written != write_amount) {
break;
}
}
if(mCurrentWriteOffset != mCurrentRilRawData->mSize) {
MessageLoopForIO::current()->WatchFileDescriptor(
fd,
false,
MessageLoopForIO::WATCH_WRITE,
&mWriteWatcher,
this);
return;
}
mCurrentRilRawData = NULL;
}
}
static void
DisconnectFromRil(Monitor* aMonitor)
{
// XXX This might "strand" messages in the outgoing queue. We'll
// assume that's OK for now.
sClient = nsnull;
{
MonitorAutoLock lock(*aMonitor);
lock.Notify();
}
}
//-----------------------------------------------------------------------------
// This code runs on any thread.
//
bool
StartRil(RilConsumer* aConsumer)
{
MOZ_ASSERT(aConsumer);
sConsumer = aConsumer;
Monitor monitor("StartRil.monitor");
bool success;
{
MonitorAutoLock lock(monitor);
XRE_GetIOMessageLoop()->PostTask(
FROM_HERE,
NewRunnableFunction(ConnectToRil, &monitor, &success));
lock.Wait();
}
return success;
}
bool
SendRilRawData(RilRawData** aMessage)
{
if (!sClient) {
return false;
}
RilRawData *msg = *aMessage;
*aMessage = nsnull;
{
MutexAutoLock lock(sClient->mMutex);
sClient->mOutgoingQ.push(msg);
}
sClient->mIOLoop->PostTask(FROM_HERE, new RilWriteTask());
return true;
}
void
StopRil()
{
Monitor monitor("StopRil.monitor");
{
MonitorAutoLock lock(monitor);
XRE_GetIOMessageLoop()->PostTask(
FROM_HERE,
NewRunnableFunction(DisconnectFromRil, &monitor));
lock.Wait();
}
sConsumer = nsnull;
}
} // namespace ipc
} // namespace mozilla