wine/gecko
0
0
Fork 0
mirror of https://gitlab.winehq.org/wine/wine-gecko.git synced 2024-09-13 09:24:08 -07:00
Code Issues Packages Projects Releases Wiki Activity
7228396780
gecko/toolkit/mozapps/installer/windows/nsis/common.nsh

5249 lines
145 KiB
Plaintext
Executable File
Raw Blame History

# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is the Mozilla Installer code.
#
# The Initial Developer of the Original Code is Mozilla Foundation
# Portions created by the Initial Developer are Copyright (C) 2006
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
# Robert Strong <robert.bugzilla@gmail.com>
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
################################################################################
# Helper defines and macros for toolkit applications
/**
* Avoid creating macros / functions that overwrite registers (see the
* GetLongPath macro for one way to avoid this)!
*
* Before using the registers exchange the passed in params and save existing
* register values to the stack.
*
* Exch $R9 ; exhange the original $R9 with the top of the stack
* Exch 1 ; exchange the top of the stack with 1 below the top of the stack
* Exch $R8 ; exchange the original $R8 with the top of the stack
* Exch 2 ; exchange the top of the stack with 2 below the top of the stack
* Exch $R7 ; exchange the original $R7 with the top of the stack
* Push $R6 ; push the original $R6 onto the top of the stack
* Push $R5 ; push the original $R5 onto the top of the stack
* Push $R4 ; push the original $R4 onto the top of the stack
*
* <do stuff>
*
* ; Restore the values.
* Pop $R4 ; restore the value for $R4 from the top of the stack
* Pop $R5 ; restore the value for $R5 from the top of the stack
* Pop $R6 ; restore the value for $R6 from the top of the stack
* Exch $R7 ; exchange the new $R7 value with the top of the stack
* Exch 2 ; exchange the top of the stack with 2 below the top of the stack
* Exch $R8 ; exchange the new $R8 value with the top of the stack
* Exch 1 ; exchange the top of the stack with 2 below the top of the stack
* Exch $R9 ; exchange the new $R9 value with the top of the stack
*
*
* When inserting macros in common.nsh from another macro in common.nsh that
* can be used from the uninstaller _MOZFUNC_UN will be undefined when it is
* inserted. Use the following to redefine _MOZFUNC_UN with its original value
* (see the RegCleanMain macro for an example).
*
* !define _MOZFUNC_UN_TMP ${_MOZFUNC_UN}
* !insertmacro ${_MOZFUNC_UN_TMP}FileJoin
* !insertmacro ${_MOZFUNC_UN_TMP}LineFind
* !insertmacro ${_MOZFUNC_UN_TMP}TextCompareNoDetails
* !insertmacro ${_MOZFUNC_UN_TMP}TrimNewLines
* !undef _MOZFUNC_UN
* !define _MOZFUNC_UN ${_MOZFUNC_UN_TMP}
* !undef _MOZFUNC_UN_TMP
*/
; When including a file provided by NSIS check if its verbose macro is defined
; to prevent loading the file a second time.
!ifmacrondef TEXTFUNC_VERBOSE
!include TextFunc.nsh
!endif
!ifmacrondef FILEFUNC_VERBOSE
!include FileFunc.nsh
!endif
!ifmacrondef LOGICLIB_VERBOSITY
!include LogicLib.nsh
!endif
!ifndef WINMESSAGES_INCLUDED
!include WinMessages.nsh
!endif
!ifndef MUI_VERBOSE
!include MUI.nsh
!endif
; When including WinVer.nsh check if ___WINVER__NSH___ is defined to prevent
; loading the file a second time. NSIS versions prior to 2.21 didn't include
; WinVer.nsh so include it with the /NOFATAL option.
!ifndef ___WINVER__NSH___
!include /NONFATAL WinVer.nsh
!endif
; NSIS provided macros that we have overridden.
!include overrides.nsh
################################################################################
# Macros for debugging
/**
* The following two macros assist with verifying that a macro doesn't
* overwrite any registers.
*
* Usage:
* ${debugSetRegisters}
* <do stuff>
* ${debugDisplayRegisters}
*/
/**
* Sets all register values to their name to assist with verifying that a macro
* doesn't overwrite any registers.
*/
!macro debugSetRegisters
StrCpy $0 "$$0"
StrCpy $1 "$$1"
StrCpy $2 "$$2"
StrCpy $3 "$$3"
StrCpy $4 "$$4"
StrCpy $5 "$$5"
StrCpy $6 "$$6"
StrCpy $7 "$$7"
StrCpy $8 "$$8"
StrCpy $9 "$$9"
StrCpy $R0 "$$R0"
StrCpy $R1 "$$R1"
StrCpy $R2 "$$R2"
StrCpy $R3 "$$R3"
StrCpy $R4 "$$R4"
StrCpy $R5 "$$R5"
StrCpy $R6 "$$R6"
StrCpy $R7 "$$R7"
StrCpy $R8 "$$R8"
StrCpy $R9 "$$R9"
!macroend
!define debugSetRegisters "!insertmacro debugSetRegisters"
/**
* Displays all register values to assist with verifying that a macro doesn't
* overwrite any registers.
*/
!macro debugDisplayRegisters
MessageBox MB_OK \
"Register Values:$\n\
$$0 = $0$\n$$1 = $1$\n$$2 = $2$\n$$3 = $3$\n$$4 = $4$\n\
$$5 = $5$\n$$6 = $6$\n$$7 = $7$\n$$8 = $8$\n$$9 = $9$\n\
$$R0 = $R0$\n$$R1 = $R1$\n$$R2 = $R2$\n$$R3 = $R3$\n$$R4 = $R4$\n\
$$R5 = $R5$\n$$R6 = $R6$\n$$R7 = $R7$\n$$R8 = $R8$\n$$R9 = $R9"
!macroend
!define debugDisplayRegisters "!insertmacro debugDisplayRegisters"
################################################################################
# Modern User Interface (MUI) override macros
; Modified version of the following MUI macros to support Mozilla localization.
; MUI_LANGUAGE
; MUI_LANGUAGEFILE_BEGIN
; MOZ_MUI_LANGUAGEFILE_END
; See <NSIS App Dir>/Contrib/Modern UI/System.nsh for more information
!define MUI_INSTALLOPTIONS_READ "!insertmacro MUI_INSTALLOPTIONS_READ"
!macro MOZ_MUI_LANGUAGE LANGUAGE
!verbose push
!verbose ${MUI_VERBOSE}
!include "${LANGUAGE}.nsh"
!verbose pop
!macroend
!macro MOZ_MUI_LANGUAGEFILE_BEGIN LANGUAGE
!ifndef MUI_INSERT
!define MUI_INSERT
!insertmacro MUI_INSERT
!endif
!ifndef "MUI_LANGUAGEFILE_${LANGUAGE}_USED"
!define "MUI_LANGUAGEFILE_${LANGUAGE}_USED"
LoadLanguageFile "${LANGUAGE}.nlf"
!else
!error "Modern UI language file ${LANGUAGE} included twice!"
!endif
!macroend
; Custom version of MUI_LANGUAGEFILE_END. The macro to add the default MUI
; strings and the macros for several strings that are part of the NSIS MUI and
; not in our locale files have been commented out.
!macro MOZ_MUI_LANGUAGEFILE_END
# !include "${NSISDIR}\Contrib\Modern UI\Language files\Default.nsh"
!ifdef MUI_LANGUAGEFILE_DEFAULT_USED
!undef MUI_LANGUAGEFILE_DEFAULT_USED
!warning "${LANGUAGE} Modern UI language file version doesn't match. Using default English texts for missing strings."
!endif
!insertmacro MUI_LANGUAGEFILE_DEFINE "MUI_${LANGUAGE}_LANGNAME" "MUI_LANGNAME"
!ifndef MUI_LANGDLL_PUSHLIST
!define MUI_LANGDLL_PUSHLIST "'${MUI_${LANGUAGE}_LANGNAME}' ${LANG_${LANGUAGE}} "
!else
!ifdef MUI_LANGDLL_PUSHLIST_TEMP
!undef MUI_LANGDLL_PUSHLIST_TEMP
!endif
!define MUI_LANGDLL_PUSHLIST_TEMP "${MUI_LANGDLL_PUSHLIST}"
!undef MUI_LANGDLL_PUSHLIST
!define MUI_LANGDLL_PUSHLIST "'${MUI_${LANGUAGE}_LANGNAME}' ${LANG_${LANGUAGE}} ${MUI_LANGDLL_PUSHLIST_TEMP}"
!endif
!insertmacro MUI_LANGUAGEFILE_LANGSTRING_PAGE WELCOME "MUI_TEXT_WELCOME_INFO_TITLE"
!insertmacro MUI_LANGUAGEFILE_LANGSTRING_PAGE WELCOME "MUI_TEXT_WELCOME_INFO_TEXT"
!insertmacro MUI_LANGUAGEFILE_LANGSTRING_PAGE LICENSE "MUI_TEXT_LICENSE_TITLE"
!insertmacro MUI_LANGUAGEFILE_LANGSTRING_PAGE LICENSE "MUI_TEXT_LICENSE_SUBTITLE"
!insertmacro MUI_LANGUAGEFILE_MULTILANGSTRING_PAGE LICENSE "MUI_INNERTEXT_LICENSE_TOP"
# !insertmacro MUI_LANGUAGEFILE_LANGSTRING_PAGE LICENSE "MUI_INNERTEXT_LICENSE_BOTTOM"
!ifdef MUI_INNERTEXT_LICENSE_BOTTOM_CHECKBOX
!insertmacro MUI_LANGUAGEFILE_LANGSTRING_PAGE LICENSE "MUI_INNERTEXT_LICENSE_BOTTOM_CHECKBOX"
!endif
!ifdef MUI_INNERTEXT_LICENSE_BOTTOM_RADIOBUTTONS
!insertmacro MUI_LANGUAGEFILE_LANGSTRING_PAGE LICENSE "MUI_INNERTEXT_LICENSE_BOTTOM_RADIOBUTTONS"
!endif
!insertmacro MUI_LANGUAGEFILE_LANGSTRING_PAGE COMPONENTS "MUI_TEXT_COMPONENTS_TITLE"
!insertmacro MUI_LANGUAGEFILE_LANGSTRING_PAGE COMPONENTS "MUI_TEXT_COMPONENTS_SUBTITLE"
!insertmacro MUI_LANGUAGEFILE_MULTILANGSTRING_PAGE COMPONENTS "MUI_INNERTEXT_COMPONENTS_DESCRIPTION_TITLE"
!insertmacro MUI_LANGUAGEFILE_MULTILANGSTRING_PAGE COMPONENTS "MUI_INNERTEXT_COMPONENTS_DESCRIPTION_INFO"
!insertmacro MUI_LANGUAGEFILE_LANGSTRING_PAGE DIRECTORY "MUI_TEXT_DIRECTORY_TITLE"
!insertmacro MUI_LANGUAGEFILE_LANGSTRING_PAGE DIRECTORY "MUI_TEXT_DIRECTORY_SUBTITLE"
!insertmacro MUI_LANGUAGEFILE_LANGSTRING_PAGE STARTMENU "MUI_TEXT_STARTMENU_TITLE"
!insertmacro MUI_LANGUAGEFILE_LANGSTRING_PAGE STARTMENU "MUI_TEXT_STARTMENU_SUBTITLE"
!insertmacro MUI_LANGUAGEFILE_LANGSTRING_PAGE STARTMENU "MUI_INNERTEXT_STARTMENU_TOP"
# !insertmacro MUI_LANGUAGEFILE_LANGSTRING_PAGE STARTMENU "MUI_INNERTEXT_STARTMENU_CHECKBOX"
!insertmacro MUI_LANGUAGEFILE_LANGSTRING_PAGE INSTFILES "MUI_TEXT_INSTALLING_TITLE"
!insertmacro MUI_LANGUAGEFILE_LANGSTRING_PAGE INSTFILES "MUI_TEXT_INSTALLING_SUBTITLE"
!insertmacro MUI_LANGUAGEFILE_LANGSTRING_PAGE INSTFILES "MUI_TEXT_FINISH_TITLE"
!insertmacro MUI_LANGUAGEFILE_LANGSTRING_PAGE INSTFILES "MUI_TEXT_FINISH_SUBTITLE"
!insertmacro MUI_LANGUAGEFILE_LANGSTRING_PAGE INSTFILES "MUI_TEXT_ABORT_TITLE"
!insertmacro MUI_LANGUAGEFILE_LANGSTRING_PAGE INSTFILES "MUI_TEXT_ABORT_SUBTITLE"
!insertmacro MUI_LANGUAGEFILE_MULTILANGSTRING_PAGE FINISH "MUI_BUTTONTEXT_FINISH"
!insertmacro MUI_LANGUAGEFILE_LANGSTRING_PAGE FINISH "MUI_TEXT_FINISH_INFO_TITLE"
!insertmacro MUI_LANGUAGEFILE_LANGSTRING_PAGE FINISH "MUI_TEXT_FINISH_INFO_TEXT"
!insertmacro MUI_LANGUAGEFILE_LANGSTRING_PAGE FINISH "MUI_TEXT_FINISH_INFO_REBOOT"
!insertmacro MUI_LANGUAGEFILE_MULTILANGSTRING_PAGE FINISH "MUI_TEXT_FINISH_REBOOTNOW"
!insertmacro MUI_LANGUAGEFILE_MULTILANGSTRING_PAGE FINISH "MUI_TEXT_FINISH_REBOOTLATER"
# !insertmacro MUI_LANGUAGEFILE_MULTILANGSTRING_PAGE FINISH "MUI_TEXT_FINISH_RUN"
# !insertmacro MUI_LANGUAGEFILE_MULTILANGSTRING_PAGE FINISH "MUI_TEXT_FINISH_SHOWREADME"
!insertmacro MUI_LANGUAGEFILE_LANGSTRING_DEFINE MUI_ABORTWARNING "MUI_TEXT_ABORTWARNING"
!insertmacro MUI_LANGUAGEFILE_UNLANGSTRING_PAGE WELCOME "MUI_UNTEXT_WELCOME_INFO_TITLE"
!insertmacro MUI_LANGUAGEFILE_UNLANGSTRING_PAGE WELCOME "MUI_UNTEXT_WELCOME_INFO_TEXT"
!insertmacro MUI_LANGUAGEFILE_UNLANGSTRING_PAGE CONFIRM "MUI_UNTEXT_CONFIRM_TITLE"
!insertmacro MUI_LANGUAGEFILE_UNLANGSTRING_PAGE CONFIRM "MUI_UNTEXT_CONFIRM_SUBTITLE"
# !insertmacro MUI_LANGUAGEFILE_UNLANGSTRING_PAGE LICENSE "MUI_UNTEXT_LICENSE_TITLE"
# !insertmacro MUI_LANGUAGEFILE_UNLANGSTRING_PAGE LICENSE "MUI_UNTEXT_LICENSE_SUBTITLE"
# !insertmacro MUI_LANGUAGEFILE_UNLANGSTRING_PAGE LICENSE "MUI_UNINNERTEXT_LICENSE_BOTTOM"
# !insertmacro MUI_LANGUAGEFILE_UNLANGSTRING_PAGE LICENSE "MUI_UNINNERTEXT_LICENSE_BOTTOM_CHECKBOX"
# !insertmacro MUI_LANGUAGEFILE_UNLANGSTRING_PAGE LICENSE "MUI_UNINNERTEXT_LICENSE_BOTTOM_RADIOBUTTONS"
# !insertmacro MUI_LANGUAGEFILE_UNLANGSTRING_PAGE COMPONENTS "MUI_UNTEXT_COMPONENTS_TITLE"
# !insertmacro MUI_LANGUAGEFILE_UNLANGSTRING_PAGE COMPONENTS "MUI_UNTEXT_COMPONENTS_SUBTITLE"
# !insertmacro MUI_LANGUAGEFILE_UNLANGSTRING_PAGE DIRECTORY "MUI_UNTEXT_DIRECTORY_TITLE"
# !insertmacro MUI_LANGUAGEFILE_UNLANGSTRING_PAGE DIRECTORY "MUI_UNTEXT_DIRECTORY_SUBTITLE"
!insertmacro MUI_LANGUAGEFILE_UNLANGSTRING_PAGE INSTFILES "MUI_UNTEXT_UNINSTALLING_TITLE"
!insertmacro MUI_LANGUAGEFILE_UNLANGSTRING_PAGE INSTFILES "MUI_UNTEXT_UNINSTALLING_SUBTITLE"
!insertmacro MUI_LANGUAGEFILE_UNLANGSTRING_PAGE INSTFILES "MUI_UNTEXT_FINISH_TITLE"
!insertmacro MUI_LANGUAGEFILE_UNLANGSTRING_PAGE INSTFILES "MUI_UNTEXT_FINISH_SUBTITLE"
!insertmacro MUI_LANGUAGEFILE_UNLANGSTRING_PAGE INSTFILES "MUI_UNTEXT_ABORT_TITLE"
!insertmacro MUI_LANGUAGEFILE_UNLANGSTRING_PAGE INSTFILES "MUI_UNTEXT_ABORT_SUBTITLE"
!insertmacro MUI_LANGUAGEFILE_UNLANGSTRING_PAGE FINISH "MUI_UNTEXT_FINISH_INFO_TITLE"
!insertmacro MUI_LANGUAGEFILE_UNLANGSTRING_PAGE FINISH "MUI_UNTEXT_FINISH_INFO_TEXT"
!insertmacro MUI_LANGUAGEFILE_UNLANGSTRING_PAGE FINISH "MUI_UNTEXT_FINISH_INFO_REBOOT"
!insertmacro MUI_LANGUAGEFILE_LANGSTRING_DEFINE MUI_UNABORTWARNING "MUI_UNTEXT_ABORTWARNING"
!macroend
################################################################################
# Macros for creating Install Options ini files
!macro createComponentsINI
WriteINIStr "$PLUGINSDIR\components.ini" "Settings" NumFields "5"
WriteINIStr "$PLUGINSDIR\components.ini" "Field 1" Type "label"
WriteINIStr "$PLUGINSDIR\components.ini" "Field 1" Text "$(OPTIONAL_COMPONENTS_LABEL)"
WriteINIStr "$PLUGINSDIR\components.ini" "Field 1" Left "0"
WriteINIStr "$PLUGINSDIR\components.ini" "Field 1" Right "-1"
WriteINIStr "$PLUGINSDIR\components.ini" "Field 1" Top "5"
WriteINIStr "$PLUGINSDIR\components.ini" "Field 1" Bottom "15"
${If} ${FileExists} "$EXEDIR\optional\extensions\inspector@mozilla.org"
WriteINIStr "$PLUGINSDIR\components.ini" "Field 2" Type "checkbox"
WriteINIStr "$PLUGINSDIR\components.ini" "Field 2" Text "$(DOMI_TITLE)"
WriteINIStr "$PLUGINSDIR\components.ini" "Field 2" Left "15"
WriteINIStr "$PLUGINSDIR\components.ini" "Field 2" Right "-1"
WriteINIStr "$PLUGINSDIR\components.ini" "Field 2" Top "20"
WriteINIStr "$PLUGINSDIR\components.ini" "Field 2" Bottom "30"
WriteINIStr "$PLUGINSDIR\components.ini" "Field 2" State "1"
WriteINIStr "$PLUGINSDIR\components.ini" "Field 2" Flags "GROUP"
${EndIf}
${If} ${FileExists} "$EXEDIR\optional\extensions\inspector@mozilla.org"
WriteINIStr "$PLUGINSDIR\components.ini" "Field 3" Type "label"
WriteINIStr "$PLUGINSDIR\components.ini" "Field 3" Text "$(DOMI_TEXT)"
WriteINIStr "$PLUGINSDIR\components.ini" "Field 3" Left "30"
WriteINIStr "$PLUGINSDIR\components.ini" "Field 3" Right "-1"
WriteINIStr "$PLUGINSDIR\components.ini" "Field 3" Top "32"
WriteINIStr "$PLUGINSDIR\components.ini" "Field 3" Bottom "52"
${EndIf}
!macroend
!macro createShortcutsINI
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Settings" NumFields "4"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 1" Type "label"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 1" Text "$(CREATE_ICONS_DESC)"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 1" Left "0"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 1" Right "-1"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 1" Top "5"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 1" Bottom "15"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 2" Type "checkbox"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 2" Text "$(ICONS_DESKTOP)"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 2" Left "15"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 2" Right "-1"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 2" Top "20"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 2" Bottom "30"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 2" State "1"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 2" Flags "GROUP"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 3" Type "checkbox"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 3" Text "$(ICONS_STARTMENU)"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 3" Left "15"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 3" Right "-1"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 3" Top "40"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 3" Bottom "50"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 3" State "1"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 4" Type "checkbox"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 4" Text "$(ICONS_QUICKLAUNCH)"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 4" Left "15"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 4" Right "-1"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 4" Top "60"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 4" Bottom "70"
WriteINIStr "$PLUGINSDIR\shortcuts.ini" "Field 4" State "1"
!macroend
!macro createBasicCustomOptionsINI
WriteINIStr "$PLUGINSDIR\options.ini" "Settings" NumFields "5"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 1" Type "label"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 1" Text "$(OPTIONS_SUMMARY)"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 1" Left "0"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 1" Right "-1"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 1" Top "0"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 1" Bottom "10"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 2" Type "RadioButton"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 2" Text "$(OPTION_STANDARD_RADIO)"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 2" Left "15"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 2" Right "-1"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 2" Top "25"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 2" Bottom "35"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 2" State "1"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 2" Flags "GROUP"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 3" Type "RadioButton"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 3" Text "$(OPTION_CUSTOM_RADIO)"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 3" Left "15"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 3" Right "-1"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 3" Top "55"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 3" Bottom "65"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 3" State "0"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 4" Type "label"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 4" Text "$(OPTION_STANDARD_DESC)"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 4" Left "30"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 4" Right "-1"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 4" Top "37"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 4" Bottom "57"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 5" Type "label"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 5" Text "$(OPTION_CUSTOM_DESC)"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 5" Left "30"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 5" Right "-1"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 5" Top "67"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 5" Bottom "87"
!macroend
!macro createBasicCompleteCustomOptionsINI
WriteINIStr "$PLUGINSDIR\options.ini" "Settings" NumFields "7"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 1" Type "label"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 1" Text "$(OPTIONS_DESC)"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 1" Left "0"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 1" Right "-1"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 1" Top "0"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 1" Bottom "10"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 2" Type "RadioButton"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 2" Text "$(OPTION_STANDARD_RADIO)"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 2" Left "15"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 2" Right "-1"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 2" Top "25"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 2" Bottom "35"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 2" State "1"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 2" Flags "GROUP"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 3" Type "RadioButton"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 3" Text "$(OPTION_COMPLETE_RADIO)"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 3" Left "15"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 3" Right "-1"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 3" Top "55"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 3" Bottom "65"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 3" State "0"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 4" Type "RadioButton"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 4" Text "$(OPTION_CUSTOM_RADIO)"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 4" Left "15"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 4" Right "-1"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 4" Top "85"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 4" Bottom "95"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 4" State "0"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 5" Type "label"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 5" Text "$(OPTION_STANDARD_DESC)"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 5" Left "30"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 5" Right "-1"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 5" Top "37"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 5" Bottom "57"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 6" Type "label"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 6" Text "$(OPTION_COMPLETE_DESC)"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 6" Left "30"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 6" Right "-1"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 6" Top "67"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 6" Bottom "87"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 7" Type "label"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 7" Text "$(OPTION_CUSTOM_DESC)"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 7" Left "30"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 7" Right "-1"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 7" Top "97"
WriteINIStr "$PLUGINSDIR\options.ini" "Field 7" Bottom "117"
!macroend
!macro createSummaryINI
WriteINIStr "$PLUGINSDIR\summary.ini" "Settings" NumFields "3"
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 1" Type "label"
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 1" Text "$(SUMMARY_INSTALLED_TO)"
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 1" Left "0"
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 1" Right "-1"
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 1" Top "5"
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 1" Bottom "15"
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 2" Type "text"
; The contents of this control must be set as follows in the pre function
; ${MUI_INSTALLOPTIONS_READ} $1 "summary.ini" "Field 2" "HWND"
; SendMessage $1 ${WM_SETTEXT} 0 "STR:$INSTDIR"
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 2" state ""
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 2" Left "0"
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 2" Right "-1"
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 2" Top "17"
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 2" Bottom "30"
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 2" flags "READONLY"
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 3" Type "label"
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 3" Text "$(SUMMARY_CLICK)"
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 3" Left "0"
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 3" Right "-1"
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 3" Top "130"
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 3" Bottom "150"
${If} "$TmpVal" == "true"
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 4" Type "label"
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 4" Text "$(SUMMARY_REBOOT_REQUIRED_INSTALL)"
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 4" Left "0"
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 4" Right "-1"
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 4" Top "35"
WriteINIStr "$PLUGINSDIR\summary.ini" "Field 4" Bottom "45"
WriteINIStr "$PLUGINSDIR\summary.ini" "Settings" NumFields "4"
${EndIf}
!macroend
!macro un.createUnConfirmINI
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Settings" NumFields "5"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 1" Type "label"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 1" Text "$(UN_CONFIRM_UNINSTALLED_FROM)"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 1" Left "0"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 1" Right "-1"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 1" Top "5"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 1" Bottom "15"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 2" Type "text"
; The contents of this control must be set as follows in the pre function
; ${MUI_INSTALLOPTIONS_READ} $1 "unconfirm.ini" "Field 2" "HWND"
; SendMessage $1 ${WM_SETTEXT} 0 "STR:$INSTDIR"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 2" State ""
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 2" Left "0"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 2" Right "-1"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 2" Top "17"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 2" Bottom "30"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 2" flags "READONLY"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 3" Type "checkbox"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 3" Text "$(UN_REMOVE_PROFILES)"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 3" Left "0"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 3" Right "-1"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 3" Top "40"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 3" Bottom "50"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 3" State "0"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 3" flags "NOTIFY"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 4" Type "text"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 4" State "$(UN_REMOVE_PROFILES_DESC)"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 4" Left "0"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 4" Right "-1"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 4" Top "52"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 4" Bottom "120"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 4" flags "MULTILINE|READONLY"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 5" Type "label"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 5" Text "$(UN_CONFIRM_CLICK)"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 5" Left "0"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 5" Right "-1"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 5" Top "130"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 5" Bottom "150"
${If} "$TmpVal" == "true"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 6" Type "label"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 6" Text "$(SUMMARY_REBOOT_REQUIRED_UNINSTALL)"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 6" Left "0"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 6" Right "-1"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 6" Top "35"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 6" Bottom "45"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Settings" NumFields "6"
; To insert this control reset Top / Bottom for controls below this one
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 3" Top "55"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 3" Bottom "65"
WriteINIStr "$PLUGINSDIR\unconfirm.ini" "Field 4" Top "67"
${EndIf}
!macroend
/**
* DEPRECATED - use GetParent instead.
*/
!macro GetParentDir
Exch $R0
Push $R1
Push $R2
Push $R3
StrLen $R3 $R0
${DoWhile} 1 > 0
IntOp $R1 $R1 - 1
${If} $R1 <= -$R3
${Break}
${EndIf}
StrCpy $R2 $R0 1 $R1
${If} $R2 == "\"
${Break}
${EndIf}
${Loop}
StrCpy $R0 $R0 $R1
Pop $R3
Pop $R2
Pop $R1
Exch $R0
!macroend
!define GetParentDir "!insertmacro GetParentDir"
/**
* DEPRECATED - use GetPathFromString and RemoveQuotesFromPath
*
* Removes quotes and trailing path separator from registry string paths.
* @param $R0
* Contains the registry string
* @return Modified string at the top of the stack.
*/
!macro GetPathFromRegStr
Exch $R0
Push $R8
Push $R9
StrCpy $R9 "$R0" "" -1
StrCmp $R9 '"' +2 0
StrCmp $R9 "'" 0 +2
StrCpy $R0 "$R0" -1
StrCpy $R9 "$R0" 1
StrCmp $R9 '"' +2 0
StrCmp $R9 "'" 0 +2
StrCpy $R0 "$R0" "" 1
StrCpy $R9 "$R0" "" -1
StrCmp $R9 "\" 0 +2
StrCpy $R0 "$R0" -1
ClearErrors
GetFullPathName $R8 $R0
IfErrors +2 0
StrCpy $R0 $R8
ClearErrors
Pop $R9
Pop $R8
Exch $R0
!macroend
!define GetPathFromRegStr "!insertmacro GetPathFromRegStr"
################################################################################
# Macros for handling files in use
/**
* Checks for files in use.
*
* Example usage:
*
* ; The first string to be pushed onto the stack MUST be "end" to indicate
* ; that there are no more relative file paths to check.
* Push "end"
* Push "chrome\toolkit.jar"
* Push "freebl3.dll"
* ; The last file pushed should be the app's main exe so if it is in use this
* ; macro will return after the first check.
* Push "${FileMainEXE}"
* ${CheckForFilesInUse} $R9
*
* !IMPORTANT - this macro uses the $R7, $R8, and $R9 registers and makes no
* attempt to restore their original values.
*
* @return _RESULT
* false if all of the files popped from the stack are not in use.
* True if any of the files popped from the stack are in use.
* $R7 = Temporary backup directory where the files will be copied to.
* $R8 = value popped from the stack. This will either be a relative file path
* from the $INSTDIR or "end" to indicate that there are no additional
* files to check.
* $R9 = _RESULT
*/
!macro CheckForFilesInUse
!ifndef ${_MOZFUNC_UN}CheckForFilesInUse
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}CheckForFilesInUse "!insertmacro ${_MOZFUNC_UN}CheckForFilesInUseCall"
Function ${_MOZFUNC_UN}CheckForFilesInUse
; Create a temporary backup directory.
GetTempFileName $R7 "$INSTDIR"
Delete "$R7"
SetOutPath "$R7"
StrCpy $R9 "false"
start:
Pop $R8
StrCmp "$R8" "end" end +1
IfFileExists "$INSTDIR\$R8" +1 start
ClearErrors
CopyFiles /SILENT "$INSTDIR\$R8" "$R7\$R8"
IfErrors +4 +1
Delete "$INSTDIR\$R8"
IfErrors +1 start
Delete "$R7\$R8"
StrCpy $R9 "true"
end:
SetOutPath "$INSTDIR"
CopyFiles /SILENT "$R7\*" "$INSTDIR\"
RmDir /r "$R7"
ClearErrors
Push $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro CheckForFilesInUseCall _RESULT
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call CheckForFilesInUse
Pop ${_RESULT}
!verbose pop
!macroend
!macro un.CheckForFilesInUseCall _RESULT
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call un.CheckForFilesInUse
Pop ${_RESULT}
!verbose pop
!macroend
!macro un.CheckForFilesInUse
!ifndef un.CheckForFilesInUse
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro CheckForFilesInUse
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
/**
* The macros below will automatically prepend un. to the function names when
* they are defined (e.g. !define un.RegCleanMain).
*/
!verbose push
!verbose 3
!ifndef _MOZFUNC_VERBOSE
!define _MOZFUNC_VERBOSE 3
!endif
!verbose ${_MOZFUNC_VERBOSE}
!define MOZFUNC_VERBOSE "!insertmacro MOZFUNC_VERBOSE"
!define _MOZFUNC_UN
!define _MOZFUNC_S
!verbose pop
!macro MOZFUNC_VERBOSE _VERBOSE
!verbose push
!verbose 3
!undef _MOZFUNC_VERBOSE
!define _MOZFUNC_VERBOSE ${_VERBOSE}
!verbose pop
!macroend
/**
* Displays a MessageBox and then calls abort to prevent continuing to the
* next page when the specified Window Class is found.
*
* @param _WINDOW_CLASS
* The Window Class to search for with FindWindow.
* @param _MSG
* The message text to display in the message box.
*
* $R7 = return value from FindWindow
* $R8 = _WINDOW_CLASS
* $R9 = _MSG
*/
!macro ManualCloseAppPrompt
!ifndef ${_MOZFUNC_UN}ManualCloseAppPrompt
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}ManualCloseAppPrompt "!insertmacro ${_MOZFUNC_UN}ManualCloseAppPromptCall"
Function ${_MOZFUNC_UN}ManualCloseAppPrompt
Exch $R9
Exch 1
Exch $R8
Push $R7
FindWindow $R7 "$R8"
IntCmp $R7 0 +3 +1 +1
MessageBox MB_OK|MB_ICONQUESTION "$R9"
Abort
Pop $R7
Exch $R8
Exch 1
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro ManualCloseAppPromptCall _WINDOW_CLASS _MSG
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_WINDOW_CLASS}"
Push "${_MSG}"
Call ManualCloseAppPrompt
!verbose pop
!macroend
!macro un.ManualCloseAppPromptCall _WINDOW_CLASS _MSG
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_WINDOW_CLASS}"
Push "${_MSG}"
Call un.ManualCloseAppPrompt
!verbose pop
!macroend
!macro un.ManualCloseAppPrompt
!ifndef un.ManualCloseAppPrompt
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro ManualCloseAppPrompt
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
/**
* Posts WM_QUIT to the application's message window which is found using the
* message window's class. This macro uses the nsProcess plugin available
* from http://nsis.sourceforge.net/NsProcess_plugin
*
* @param _MSG
* The message text to display in the message box.
* @param _PROMPT
* If false don't prompt the user and automatically exit the
* application if it is running.
*
* $R6 = return value for nsProcess::_FindProcess and nsProcess::_KillProcess
* $R7 = return value from FindWindow
* $R8 = _PROMPT
* $R9 = _MSG
*/
!macro CloseApp
!ifndef ${_MOZFUNC_UN}CloseApp
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}CloseApp "!insertmacro ${_MOZFUNC_UN}CloseAppCall"
Function ${_MOZFUNC_UN}CloseApp
Exch $R9
Exch 1
Exch $R8
Push $R7
Push $R6
loop:
Push $R6
nsProcess::_FindProcess /NOUNLOAD "${FileMainEXE}"
Pop $R6
StrCmp $R6 0 +1 end
StrCmp $R8 "false" +2 +1
MessageBox MB_OKCANCEL|MB_ICONQUESTION "$R9" IDCANCEL exit 0
FindWindow $R7 "${WindowClass}"
IntCmp $R7 0 +4 +1 +1
System::Call 'user32::PostMessage(i r17, i ${WM_QUIT}, i 0, i 0)'
# The amount of time to wait for the app to shutdown before prompting again
Sleep 5000
Push $R6
nsProcess::_FindProcess /NOUNLOAD "${FileMainEXE}"
Pop $R6
StrCmp $R6 0 +1 end
Push $R6
nsProcess::_KillProcess /NOUNLOAD "${FileMainEXE}"
Pop $R6
Sleep 2000
Goto loop
exit:
nsProcess::_Unload
Quit
end:
nsProcess::_Unload
Pop $R6
Pop $R7
Exch $R8
Exch 1
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro CloseAppCall _MSG _PROMPT
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_MSG}"
Push "${_PROMPT}"
Call CloseApp
!verbose pop
!macroend
!macro un.CloseApp
!ifndef un.CloseApp
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro CloseApp
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
!macro un.CloseAppCall _MSG _PROMPT
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_MSG}"
Push "${_PROMPT}"
Call un.CloseApp
!verbose pop
!macroend
################################################################################
# Macros for working with the registry
/**
* Writes a registry string using SHCTX and the supplied params and logs the
* action to the install log and the uninstall log if _LOG_UNINSTALL equals 1.
*
* Define NO_LOG to prevent all logging when calling this from the uninstaller.
*
* @param _ROOT
* The registry key root as defined by NSIS (e.g. HKLM, HKCU, etc.).
* This will only be used for logging.
* @param _KEY
* The subkey in relation to the key root.
* @param _NAME
* The key value name to write to.
* @param _STR
* The string to write to the key value name.
* @param _LOG_UNINSTALL
* 0 = don't add to uninstall log, 1 = add to uninstall log.
*
* $R5 = _ROOT
* $R6 = _KEY
* $R7 = _NAME
* $R8 = _STR
* $R9 = _LOG_UNINSTALL
*/
!macro WriteRegStr2
!ifndef ${_MOZFUNC_UN}WriteRegStr2
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}WriteRegStr2 "!insertmacro ${_MOZFUNC_UN}WriteRegStr2Call"
Function ${_MOZFUNC_UN}WriteRegStr2
Exch $R9
Exch 1
Exch $R8
Exch 2
Exch $R7
Exch 3
Exch $R6
Exch 4
Exch $R5
ClearErrors
WriteRegStr SHCTX "$R6" "$R7" "$R8"
!ifndef NO_LOG
IfErrors 0 +3
FileWrite $fhInstallLog " ** ERROR Adding Registry String: $R5 | $R6 | $R7 | $R8 **$\r$\n"
GoTo +4
StrCmp "$R9" "1" +1 +2
FileWrite $fhUninstallLog "RegVal: $R5 | $R6 | $R7$\r$\n"
FileWrite $fhInstallLog " Added Registry String: $R5 | $R6 | $R7 | $R8$\r$\n"
!endif
Exch $R5
Exch 4
Exch $R6
Exch 3
Exch $R7
Exch 2
Exch $R8
Exch 1
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro WriteRegStr2Call _ROOT _KEY _NAME _STR _LOG_UNINSTALL
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_ROOT}"
Push "${_KEY}"
Push "${_NAME}"
Push "${_STR}"
Push "${_LOG_UNINSTALL}"
Call WriteRegStr2
!verbose pop
!macroend
!macro un.WriteRegStr2Call _ROOT _KEY _NAME _STR _LOG_UNINSTALL
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_ROOT}"
Push "${_KEY}"
Push "${_NAME}"
Push "${_STR}"
Push "${_LOG_UNINSTALL}"
Call un.WriteRegStr2
!verbose pop
!macroend
!macro un.WriteRegStr2
!ifndef un.WriteRegStr2
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro WriteRegStr2
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
/**
* Writes a registry dword using SHCTX and the supplied params and logs the
* action to the install log and the uninstall log if _LOG_UNINSTALL equals 1.
*
* Define NO_LOG to prevent all logging when calling this from the uninstaller.
*
* @param _ROOT
* The registry key root as defined by NSIS (e.g. HKLM, HKCU, etc.).
* This will only be used for logging.
* @param _KEY
* The subkey in relation to the key root.
* @param _NAME
* The key value name to write to.
* @param _DWORD
* The dword to write to the key value name.
* @param _LOG_UNINSTALL
* 0 = don't add to uninstall log, 1 = add to uninstall log.
*
* $R5 = _ROOT
* $R6 = _KEY
* $R7 = _NAME
* $R8 = _DWORD
* $R9 = _LOG_UNINSTALL
*/
!macro WriteRegDWORD2
!ifndef ${_MOZFUNC_UN}WriteRegDWORD2
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}WriteRegDWORD2 "!insertmacro ${_MOZFUNC_UN}WriteRegDWORD2Call"
Function ${_MOZFUNC_UN}WriteRegDWORD2
Exch $R9
Exch 1
Exch $R8
Exch 2
Exch $R7
Exch 3
Exch $R6
Exch 4
Exch $R5
ClearErrors
WriteRegDWORD SHCTX "$R6" "$R7" "$R8"
!ifndef NO_LOG
IfErrors 0 +3
FileWrite $fhInstallLog " ** ERROR Adding Registry DWord: $R5 | $R6 | $R7 | $R8 **$\r$\n"
GoTo +4
StrCmp "$R9" "1" +1 +2
FileWrite $fhUninstallLog "RegVal: $R5 | $R6 | $R7$\r$\n"
FileWrite $fhInstallLog " Added Registry DWord: $R5 | $R6 | $R7 | $R8$\r$\n"
!endif
Exch $R5
Exch 4
Exch $R6
Exch 3
Exch $R7
Exch 2
Exch $R8
Exch 1
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro WriteRegDWORD2Call _ROOT _KEY _NAME _DWORD _LOG_UNINSTALL
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_ROOT}"
Push "${_KEY}"
Push "${_NAME}"
Push "${_DWORD}"
Push "${_LOG_UNINSTALL}"
Call WriteRegDWORD2
!verbose pop
!macroend
!macro un.WriteRegDWORD2Call _ROOT _KEY _NAME _DWORD _LOG_UNINSTALL
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_ROOT}"
Push "${_KEY}"
Push "${_NAME}"
Push "${_DWORD}"
Push "${_LOG_UNINSTALL}"
Call un.WriteRegDWORD2
!verbose pop
!macroend
!macro un.WriteRegDWORD2
!ifndef un.WriteRegDWORD2
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro WriteRegDWORD2
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
/**
* Writes a registry string to HKCR using the supplied params and logs the
* action to the install log and the uninstall log if _LOG_UNINSTALL equals 1.
*
* Define NO_LOG to prevent all logging when calling this from the uninstaller.
*
* @param _ROOT
* The registry key root as defined by NSIS (e.g. HKLM, HKCU, etc.).
* This will only be used for logging.
* @param _KEY
* The subkey in relation to the key root.
* @param _NAME
* The key value name to write to.
* @param _STR
* The string to write to the key value name.
* @param _LOG_UNINSTALL
* 0 = don't add to uninstall log, 1 = add to uninstall log.
*
* $R5 = _ROOT
* $R6 = _KEY
* $R7 = _NAME
* $R8 = _STR
* $R9 = _LOG_UNINSTALL
*/
!macro WriteRegStrHKCR
!ifndef ${_MOZFUNC_UN}WriteRegStrHKCR
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}WriteRegStrHKCR "!insertmacro ${_MOZFUNC_UN}WriteRegStrHKCRCall"
Function ${_MOZFUNC_UN}WriteRegStrHKCR
Exch $R9
Exch 1
Exch $R8
Exch 2
Exch $R7
Exch 3
Exch $R6
Exch 4
Exch $R5
ClearErrors
WriteRegStr HKCR "$R6" "$R7" "$R8"
!ifndef NO_LOG
IfErrors 0 +3
FileWrite $fhInstallLog " ** ERROR Adding Registry String: $R5 | $R6 | $R7 | $R8 **$\r$\n"
GoTo +4
StrCmp "$R9" "1" +1 +2
FileWrite $fhUninstallLog "RegVal: $R5 | $R6 | $R7$\r$\n"
FileWrite $fhInstallLog " Added Registry String: $R5 | $R6 | $R7 | $R8$\r$\n"
!endif
Exch $R5
Exch 4
Exch $R6
Exch 3
Exch $R7
Exch 2
Exch $R8
Exch 1
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro WriteRegStrHKCRCall _ROOT _KEY _NAME _STR _LOG_UNINSTALL
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_ROOT}"
Push "${_KEY}"
Push "${_NAME}"
Push "${_STR}"
Push "${_LOG_UNINSTALL}"
Call WriteRegStrHKCR
!verbose pop
!macroend
!macro un.WriteRegStrHKCRCall _ROOT _KEY _NAME _STR _LOG_UNINSTALL
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_ROOT}"
Push "${_KEY}"
Push "${_NAME}"
Push "${_STR}"
Push "${_LOG_UNINSTALL}"
Call un.WriteRegStrHKCR
!verbose pop
!macroend
!macro un.WriteRegStrHKCR
!ifndef un.WriteRegStrHKCR
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro WriteRegStrHKCR
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
/**
* Creates a registry key. NSIS doesn't supply a RegCreateKey method and instead
* will auto create keys when a reg key name value pair is set.
* i - int (includes char, byte, short, handles, pointers and so on)
* t - text, string (LPCSTR, pointer to first character)
* * - pointer specifier -> the proc needs the pointer to type, affects next
* char (parameter) [ex: '*i' - pointer to int]
* see the NSIS documentation for additional information.
*/
!define RegCreateKey "Advapi32::RegCreateKeyA(i, t, *i) i"
/**
* Creates a registry key. This will log the actions to the install and
* uninstall logs. Alternatively you can set a registry value to create the key
* and then delete the value.
*
* Define NO_LOG to prevent all logging when calling this from the uninstaller.
*
* @param _ROOT
* The registry key root as defined by NSIS (e.g. HKLM, HKCU, etc.).
* @param _KEY
* The subkey in relation to the key root.
* @param _LOG_UNINSTALL
* 0 = don't add to uninstall log, 1 = add to uninstall log.
*
* $R4 = [out] handle to newly created registry key. If this is not a key
* located in one of the predefined registry keys this must be closed
* with RegCloseKey (this should not be needed unless someone decides to
* do something extremely squirrelly with NSIS).
* $R5 = return value from RegCreateKeyA (represented by r15 in the system call).
* $R6 = [in] hKey passed to RegCreateKeyA.
* $R7 = _ROOT
* $R8 = _KEY
* $R9 = _LOG_UNINSTALL
*/
!macro CreateRegKey
!ifndef ${_MOZFUNC_UN}CreateRegKey
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}CreateRegKey "!insertmacro ${_MOZFUNC_UN}CreateRegKeyCall"
Function ${_MOZFUNC_UN}CreateRegKey
Exch $R9
Exch 1
Exch $R8
Exch 2
Exch $R7
Push $R6
Push $R5
Push $R4
StrCmp $R7 "HKCR" +1 +2
StrCpy $R6 "0x80000000"
StrCmp $R7 "HKCU" +1 +2
StrCpy $R6 "0x80000001"
StrCmp $R7 "HKLM" +1 +2
StrCpy $R6 "0x80000002"
; see definition of RegCreateKey
System::Call "${RegCreateKey}($R6, '$R8', .r14) .r15"
!ifndef NO_LOG
; if $R5 is not 0 then there was an error creating the registry key.
IntCmp $R5 0 +3 +3
FileWrite $fhInstallLog " ** ERROR Adding Registry Key: $R7 | $R8 **$\r$\n"
GoTo +4
StrCmp "$R9" "1" +1 +2
FileWrite $fhUninstallLog "RegKey: $R7 | $R8$\r$\n"
FileWrite $fhInstallLog " Added Registry Key: $R7 | $R8$\r$\n"
!endif
Pop $R4
Pop $R5
Pop $R6
Exch $R7
Exch 2
Exch $R8
Exch 1
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro CreateRegKeyCall _ROOT _KEY _LOG_UNINSTALL
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_ROOT}"
Push "${_KEY}"
Push "${_LOG_UNINSTALL}"
Call CreateRegKey
!verbose pop
!macroend
!macro un.CreateRegKeyCall _ROOT _KEY _LOG_UNINSTALL
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_ROOT}"
Push "${_KEY}"
Push "${_LOG_UNINSTALL}"
Call un.CreateRegKey
!verbose pop
!macroend
!macro un.CreateRegKey
!ifndef un.CreateRegKey
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro CreateRegKey
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
################################################################################
# Macros for adding file and protocol handlers
/**
* Writes common registry values for a handler using SHCTX.
*
* @param _KEY
* The subkey in relation to the key root.
* @param _VALOPEN
* The path and args to launch the application.
* @param _VALICON
* The path to an exe that contains an icon and the icon resource id.
* @param _DISPNAME
* The display name for the handler. If emtpy no value will be set.
* @param _ISPROTOCOL
* Sets protocol handler specific registry values when "true".
* @param _ISDDE
* Sets DDE specific registry values when "true".
*
* $R3 = string value of the current registry key path.
* $R4 = _KEY
* $R5 = _VALOPEN
* $R6 = _VALICON
* $R7 = _DISPNAME
* $R8 = _ISPROTOCOL
* $R9 = _ISDDE
*/
!macro AddHandlerValues
!ifndef ${_MOZFUNC_UN}AddHandlerValues
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}AddHandlerValues "!insertmacro ${_MOZFUNC_UN}AddHandlerValuesCall"
Function ${_MOZFUNC_UN}AddHandlerValues
Exch $R9
Exch 1
Exch $R8
Exch 2
Exch $R7
Exch 3
Exch $R6
Exch 4
Exch $R5
Exch 5
Exch $R4
Push $R3
StrCmp "$R7" "" +6 +1
ReadRegStr $R3 SHCTX "$R4" "FriendlyTypeName"
StrCmp "$R3" "" +1 +3
WriteRegStr SHCTX "$R4" "" "$R7"
WriteRegStr SHCTX "$R4" "FriendlyTypeName" "$R7"
StrCmp "$R8" "true" +1 +8
WriteRegStr SHCTX "$R4" "URL Protocol" ""
StrCpy $R3 ""
ClearErrors
ReadRegDWord $R3 SHCTX "$R4" "EditFlags"
StrCmp $R3 "" +1 +3 ; Only add EditFlags if a value doesn't exist
DeleteRegValue SHCTX "$R4" "EditFlags"
WriteRegDWord SHCTX "$R4" "EditFlags" 0x00000002
StrCmp "$R6" "" +2 +1
WriteRegStr SHCTX "$R4\DefaultIcon" "" "$R6"
StrCmp "$R5" "" +2 +1
WriteRegStr SHCTX "$R4\shell\open\command" "" "$R5"
!ifdef DDEApplication
StrCmp "$R9" "true" +1 +11
WriteRegStr SHCTX "$R4\shell\open\ddeexec" "" "$\"%1$\",,0,0,,,,"
WriteRegStr SHCTX "$R4\shell\open\ddeexec" "NoActivateHandler" ""
WriteRegStr SHCTX "$R4\shell\open\ddeexec\Application" "" "${DDEApplication}"
WriteRegStr SHCTX "$R4\shell\open\ddeexec\Topic" "" "WWW_OpenURL"
; The ifexec key may have been added by another application so try to
; delete it to prevent it from breaking this app's shell integration.
; Also, IE 6 and below doesn't remove this key when it sets itself as the
; default handler and if this key exists IE's shell integration breaks.
DeleteRegKey HKLM "$R4\shell\open\ddeexec\ifexec"
DeleteRegKey HKCU "$R4\shell\open\ddeexec\ifexec"
!endif
ClearErrors
Pop $R3
Exch $R4
Exch 5
Exch $R5
Exch 4
Exch $R6
Exch 3
Exch $R7
Exch 2
Exch $R8
Exch 1
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro AddHandlerValuesCall _KEY _VALOPEN _VALICON _DISPNAME _ISPROTOCOL _ISDDE
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_KEY}"
Push "${_VALOPEN}"
Push "${_VALICON}"
Push "${_DISPNAME}"
Push "${_ISPROTOCOL}"
Push "${_ISDDE}"
Call AddHandlerValues
!verbose pop
!macroend
!macro un.AddHandlerValuesCall _KEY _VALOPEN _VALICON _DISPNAME _ISPROTOCOL _ISDDE
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_KEY}"
Push "${_VALOPEN}"
Push "${_VALICON}"
Push "${_DISPNAME}"
Push "${_ISPROTOCOL}"
Push "${_ISDDE}"
Call un.AddHandlerValues
!verbose pop
!macroend
!macro un.AddHandlerValues
!ifndef un.AddHandlerValues
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro AddHandlerValues
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
/**
* Writes common registry values for a handler that uses DDE using SHCTX.
*
* @param _KEY
* The key name in relation to the HKCR root. SOFTWARE\Classes is
* prefixed to this value when using SHCTX.
* @param _VALOPEN
* The path and args to launch the application.
* @param _VALICON
* The path to an exe that contains an icon and the icon resource id.
* @param _DISPNAME
* The display name for the handler. If emtpy no value will be set.
* @param _ISPROTOCOL
* Sets protocol handler specific registry values when "true".
* @param _DDE_APPNAME
* Sets DDE specific registry values when not an empty string.
*
* $R0 = storage for SOFTWARE\Classes
* $R1 = string value of the current registry key path.
* $R2 = _KEY
* $R3 = _VALOPEN
* $R4 = _VALICON
* $R5 = _DISPNAME
* $R6 = _ISPROTOCOL
* $R7 = _DDE_APPNAME
* $R8 = _DDE_DEFAULT
* $R9 = _DDE_TOPIC
*/
!macro AddDDEHandlerValues
!ifndef ${_MOZFUNC_UN}AddDDEHandlerValues
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}AddDDEHandlerValues "!insertmacro ${_MOZFUNC_UN}AddDDEHandlerValuesCall"
Function ${_MOZFUNC_UN}AddDDEHandlerValues
Exch $R9
Exch 1
Exch $R8
Exch 2
Exch $R7
Exch 3
Exch $R6
Exch 4
Exch $R5
Exch 5
Exch $R4
Exch 6
Exch $R3
Exch 7
Exch $R2
Push $R1
Push $R0
StrCpy $R0 "SOFTWARE\Classes"
StrCmp "$R5" "" +6 +1
ReadRegStr $R1 SHCTX "$R2" "FriendlyTypeName"
StrCmp "$R1" "" +1 +3
WriteRegStr SHCTX "$R0\$R2" "" "$R5"
WriteRegStr SHCTX "$R0\$R2" "FriendlyTypeName" "$R5"
StrCmp "$R6" "true" +1 +8
WriteRegStr SHCTX "$R0\$R2" "URL Protocol" ""
StrCpy $R1 ""
ClearErrors
ReadRegDWord $R1 SHCTX "$R0\$R2" "EditFlags"
StrCmp $R1 "" +1 +3 ; Only add EditFlags if a value doesn't exist
DeleteRegValue SHCTX "$R0\$R2" "EditFlags"
WriteRegDWord SHCTX "$R0\$R2" "EditFlags" 0x00000002
StrCmp "$R4" "" +2 +1
WriteRegStr SHCTX "$R0\$R2\DefaultIcon" "" "$R4"
WriteRegStr SHCTX "$R0\$R2\shell\open\command" "" "$R3"
WriteRegStr SHCTX "$R0\$R2\shell\open\ddeexec" "" "$R8"
WriteRegStr SHCTX "$R0\$R2\shell\open\ddeexec" "NoActivateHandler" ""
WriteRegStr SHCTX "$R0\$R2\shell\open\ddeexec\Application" "" "$R7"
WriteRegStr SHCTX "$R0\$R2\shell\open\ddeexec\Topic" "" "$R9"
; The ifexec key may have been added by another application so try to
; delete it to prevent it from breaking this app's shell integration.
; Also, IE 6 and below doesn't remove this key when it sets itself as the
; default handler and if this key exists IE's shell integration breaks.
DeleteRegKey HKLM "$R0\$R2\shell\open\ddeexec\ifexec"
DeleteRegKey HKCU "$R0\$R2\shell\open\ddeexec\ifexec"
ClearErrors
Pop $R0
Pop $R1
Exch $R2
Exch 7
Exch $R3
Exch 6
Exch $R4
Exch 5
Exch $R5
Exch 4
Exch $R6
Exch 3
Exch $R7
Exch 2
Exch $R8
Exch 1
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro AddDDEHandlerValuesCall _KEY _VALOPEN _VALICON _DISPNAME _ISPROTOCOL _DDE_APPNAME _DDE_DEFAULT _DDE_TOPIC
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_KEY}"
Push "${_VALOPEN}"
Push "${_VALICON}"
Push "${_DISPNAME}"
Push "${_ISPROTOCOL}"
Push "${_DDE_APPNAME}"
Push "${_DDE_DEFAULT}"
Push "${_DDE_TOPIC}"
Call AddDDEHandlerValues
!verbose pop
!macroend
!macro un.AddDDEHandlerValuesCall _KEY _VALOPEN _VALICON _DISPNAME _ISPROTOCOL _DDE_APPNAME _DDE_DEFAULT _DDE_TOPIC
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_KEY}"
Push "${_VALOPEN}"
Push "${_VALICON}"
Push "${_DISPNAME}"
Push "${_ISPROTOCOL}"
Push "${_DDE_APPNAME}"
Push "${_DDE_DEFAULT}"
Push "${_DDE_TOPIC}"
Call un.AddDDEHandlerValues
!verbose pop
!macroend
!macro un.AddDDEHandlerValues
!ifndef un.AddDDEHandlerValues
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro AddDDEHandlerValues
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
################################################################################
# Macros for retrieving existing install paths
/**
* Finds a second installation of the application so we can make informed
* decisions about registry operations. This uses SHCTX to determine the
* registry hive so you must call SetShellVarContext first.
*
* @param _KEY
* The registry subkey (typically this will be Software\Mozilla).
* @return _RESULT
* false if a second install isn't found, path to the main exe if a
* second install is found.
*
* $R3 = stores the long path to $INSTDIR
* $R4 = counter for the outer loop's EnumRegKey
* $R5 = return value from ReadRegStr and RemoveQuotesFromPath
* $R6 = return value from GetParent
* $R7 = return value from the loop's EnumRegKey
* $R8 = storage for _KEY
* $R9 = _KEY and _RESULT
*/
!macro GetSecondInstallPath
!ifndef ${_MOZFUNC_UN}GetSecondInstallPath
!define _MOZFUNC_UN_TMP ${_MOZFUNC_UN}
!insertmacro ${_MOZFUNC_UN_TMP}GetLongPath
!insertmacro ${_MOZFUNC_UN_TMP}GetParent
!insertmacro ${_MOZFUNC_UN_TMP}RemoveQuotesFromPath
!undef _MOZFUNC_UN
!define _MOZFUNC_UN ${_MOZFUNC_UN_TMP}
!undef _MOZFUNC_UN_TMP
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}GetSecondInstallPath "!insertmacro ${_MOZFUNC_UN}GetSecondInstallPathCall"
Function ${_MOZFUNC_UN}GetSecondInstallPath
Exch $R9
Push $R8
Push $R7
Push $R6
Push $R5
Push $R4
Push $R3
${${_MOZFUNC_UN}GetLongPath} "$INSTDIR" $R3
StrCpy $R4 0 ; set the counter for the loop to 0
StrCpy $R8 "$R9" ; Registry key path to search
StrCpy $R9 "false" ; default return value
loop:
EnumRegKey $R7 SHCTX $R8 $R4
StrCmp $R7 "" end +1 ; if empty there are no more keys to enumerate
IntOp $R4 $R4 + 1 ; increment the loop's counter
ClearErrors
ReadRegStr $R5 SHCTX "$R8\$R7\bin" "PathToExe"
IfErrors loop
${${_MOZFUNC_UN}RemoveQuotesFromPath} "$R5" $R5
IfFileExists "$R5" +1 loop
${${_MOZFUNC_UN}GetLongPath} "$R5" $R5
${${_MOZFUNC_UN}GetParent} "$R5" $R6
StrCmp "$R6" "$R3" loop +1
StrCmp "$R6\${FileMainEXE}" "$R5" +1 loop
StrCpy $R9 "$R5"
end:
ClearErrors
Pop $R3
Pop $R4
Pop $R5
Pop $R6
Pop $R7
Pop $R8
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro GetSecondInstallPathCall _KEY _RESULT
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_KEY}"
Call GetSecondInstallPath
Pop ${_RESULT}
!verbose pop
!macroend
!macro un.GetSecondInstallPathCall _KEY _RESULT
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_KEY}"
Call un.GetSecondInstallPath
Pop ${_RESULT}
!verbose pop
!macroend
!macro un.GetSecondInstallPath
!ifndef un.GetSecondInstallPath
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro GetSecondInstallPath
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
/**
* Finds an existing installation path for the application based on the
* application's executable name so we can default to using this path for the
* install. If there is zero or more than one installation of the application
* then we default to the default installation path. This uses SHCTX to
* determine the registry hive to read from so you must call SetShellVarContext
* first.
*
* @param _KEY
* The registry subkey (typically this will be Software\Mozilla\App Name).
* @return _RESULT
* false if a single install location for this app name isn't found,
* path to the install directory if a single install location is found.
*
* $R5 = counter for the loop's EnumRegKey
* $R6 = return value from EnumRegKey
* $R7 = return value from ReadRegStr
* $R8 = storage for _KEY
* $R9 = _KEY and _RESULT
*/
!macro GetSingleInstallPath
!ifndef ${_MOZFUNC_UN}GetSingleInstallPath
!define _MOZFUNC_UN_TMP ${_MOZFUNC_UN}
!insertmacro ${_MOZFUNC_UN_TMP}GetLongPath
!insertmacro ${_MOZFUNC_UN_TMP}GetParent
!insertmacro ${_MOZFUNC_UN_TMP}RemoveQuotesFromPath
!undef _MOZFUNC_UN
!define _MOZFUNC_UN ${_MOZFUNC_UN_TMP}
!undef _MOZFUNC_UN_TMP
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}GetSingleInstallPath "!insertmacro ${_MOZFUNC_UN}GetSingleInstallPathCall"
Function ${_MOZFUNC_UN}GetSingleInstallPath
Exch $R9
Push $R8
Push $R7
Push $R6
Push $R5
StrCpy $R8 $R9
StrCpy $R9 "false"
StrCpy $R5 0 ; set the counter for the loop to 0
loop:
ClearErrors
EnumRegKey $R6 SHCTX $R8 $R5
IfErrors cleanup
StrCmp $R6 "" cleanup +1 ; if empty there are no more keys to enumerate
IntOp $R5 $R5 + 1 ; increment the loop's counter
ClearErrors
ReadRegStr $R7 SHCTX "$R8\$R6\Main" "PathToExe"
IfErrors loop
${${_MOZFUNC_UN}RemoveQuotesFromPath} "$R7" $R7
GetFullPathName $R7 "$R7"
IfErrors loop
StrCmp "$R9" "false" +1 +3
StrCpy $R9 "$R7"
GoTo Loop
StrCpy $R9 "false"
cleanup:
StrCmp $R9 "false" end +1
${${_MOZFUNC_UN}GetLongPath} "$R9" $R9
${${_MOZFUNC_UN}GetParent} "$R9" $R9
end:
ClearErrors
Pop $R5
Pop $R6
Pop $R7
Pop $R8
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro GetSingleInstallPathCall _KEY _RESULT
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_KEY}"
Call GetSingleInstallPath
Pop ${_RESULT}
!verbose pop
!macroend
!macro un.GetSingleInstallPathCall _KEY _RESULT
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_KEY}"
Call un.GetSingleInstallPath
Pop ${_RESULT}
!verbose pop
!macroend
!macro un.GetSingleInstallPath
!ifndef un.GetSingleInstallPath
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro GetSingleInstallPath
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
################################################################################
# Macros for working with the file system
/**
* Attempts to delete a file if it exists. This will fail if the file is in use.
*
* @param _FILE
* The path to the file that is to be deleted.
*/
!macro DeleteFile _FILE
${If} ${FileExists} "${_FILE}"
Delete "${_FILE}"
${EndIf}
!macroend
!define DeleteFile "!insertmacro DeleteFile"
/**
* Removes a directory if it exists and is empty.
*
* @param _DIR
* The path to the directory that is to be removed.
*/
!macro RemoveDir _DIR
${If} ${FileExists} "${_DIR}"
RmDir "${_DIR}"
${EndIf}
!macroend
!define RemoveDir "!insertmacro RemoveDir"
/**
* Checks whether we can write to the install directory. If the install
* directory already exists this will attempt to create a temporary file in the
* install directory and then delete it. If it does not exist this will attempt
* to create the directory and then delete it. If we can write to the install
* directory this will return true... if not, this will return false.
*
* @return _RESULT
* true if the install directory can be written to otherwise false.
*
* $R7 = temp filename in installation directory returned from GetTempFileName
* $R8 = filehandle to temp file used for writing
* $R9 = _RESULT
*/
!macro CanWriteToInstallDir
!ifndef ${_MOZFUNC_UN}CanWriteToInstallDir
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}CanWriteToInstallDir "!insertmacro ${_MOZFUNC_UN}CanWriteToInstallDirCall"
Function ${_MOZFUNC_UN}CanWriteToInstallDir
Push $R9
Push $R8
Push $R7
StrCpy $R9 "true"
IfFileExists "$INSTDIR" +1 checkCreateDir
GetTempFileName $R7 "$INSTDIR"
FileOpen $R8 $R7 w
FileWrite $R8 "Write Access Test"
FileClose $R8
IfFileExists "$R7" +3 +1
StrCpy $R9 "false"
GoTo end
Delete $R7
GoTo end
checkCreateDir:
CreateDirectory "$INSTDIR"
IfFileExists "$INSTDIR" +3 +1
StrCpy $R9 "false"
GoTo end
RmDir "$INSTDIR"
end:
ClearErrors
Pop $R7
Pop $R8
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro CanWriteToInstallDirCall _RESULT
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call CanWriteToInstallDir
Pop ${_RESULT}
!verbose pop
!macroend
!macro un.CanWriteToInstallDirCall _RESULT
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call un.CanWriteToInstallDir
Pop ${_RESULT}
!verbose pop
!macroend
!macro un.CanWriteToInstallDir
!ifndef un.CanWriteToInstallDir
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro CanWriteToInstallDir
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
/**
* Checks whether there is sufficient free space available on the installation
* directory's drive. If there is sufficient free space this will return true...
* if not, this will return false. This will only calculate the size of the
* first three sections.
*
* @return _RESULT
* true if there is sufficient free space otherwise false.
*
* $R2 = return value from greater than comparison (0=false 1=true)
* $R3 = free space for the install directory's drive
* $R4 = install directory root
* $R5 = return value from SectionGetSize
* $R6 = return value from 'and' comparison of SectionGetFlags (1=selected)
* $R7 = return value from SectionGetFlags
* $R8 = size in KB required for this installation
* $R9 = _RESULT
*/
!macro CheckDiskSpace
!ifndef ${_MOZFUNC_UN}CheckDiskSpace
!define _MOZFUNC_UN_TMP ${_MOZFUNC_UN}
!insertmacro ${_MOZFUNC_UN_TMP}GetRoot
!insertmacro ${_MOZFUNC_UN_TMP}DriveSpace
!undef _MOZFUNC_UN
!define _MOZFUNC_UN ${_MOZFUNC_UN_TMP}
!undef _MOZFUNC_UN_TMP
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}CheckDiskSpace "!insertmacro ${_MOZFUNC_UN}CheckDiskSpaceCall"
Function ${_MOZFUNC_UN}CheckDiskSpace
Push $R9
Push $R8
Push $R7
Push $R6
Push $R5
Push $R4
Push $R3
Push $R2
StrCpy $R9 "true"
SectionGetSize 0 $R8
SectionGetFlags 1 $R7
IntOp $R6 ${SF_SELECTED} & $R7
IntCmp $R6 0 +3 +1 +1
SectionGetSize 1 $R5
IntOp $R8 $R8 + $R5
SectionGetFlags 2 $R7
IntOp $R6 ${SF_SELECTED} & $R7
IntCmp $R6 0 +3 +1 +1
SectionGetSize 2 $R5
IntOp $R8 $R8 + $R5
${${_MOZFUNC_UN}GetRoot} "$INSTDIR" $R4
${${_MOZFUNC_UN}DriveSpace} "$R4" "/D=F /S=K" $R3
System::Int64Op $R3 > $R8
Pop $R2
IntCmp $R2 1 end +1 +1
StrCpy $R9 "false"
end:
ClearErrors
Pop $R2
Pop $R3
Pop $R4
Pop $R5
Pop $R6
Pop $R7
Pop $R8
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro CheckDiskSpaceCall _RESULT
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call CheckDiskSpace
Pop ${_RESULT}
!verbose pop
!macroend
!macro un.CheckDiskSpaceCall _RESULT
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call un.CheckDiskSpace
Pop ${_RESULT}
!verbose pop
!macroend
!macro un.CheckDiskSpace
!ifndef un.CheckDiskSpace
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro CheckDiskSpace
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
/**
* Returns the path found within a passed in string. The path is quoted or not
* with the exception of an unquoted non 8dot3 path without arguments that is
* also not a DefaultIcon path, is a 8dot3 path or not, has command line
* arguments, or is a registry DefaultIcon path (e.g. <path to binary>,# where #
* is the icon's resuorce id). The string does not need to be a valid path or
* exist. It is up to the caller to pass in a string of one of the forms noted
* above and to verify existence if necessary.
*
* Examples:
* In: C:\PROGRA~1\MOZILL~1\FIREFOX.EXE -flag "%1"
* In: C:\PROGRA~1\MOZILL~1\FIREFOX.EXE,0
* In: C:\PROGRA~1\MOZILL~1\FIREFOX.EXE
* In: "C:\PROGRA~1\MOZILL~1\FIREFOX.EXE"
* In: "C:\PROGRA~1\MOZILL~1\FIREFOX.EXE" -flag "%1"
* Out: C:\PROGRA~1\MOZILL~1\FIREFOX.EXE
*
* In: "C:\Program Files\Mozilla Firefox\firefox.exe" -flag "%1"
* In: C:\Program Files\Mozilla Firefox\firefox.exe,0
* In: "C:\Program Files\Mozilla Firefox\firefox.exe"
* Out: C:\Program Files\Mozilla Firefox\firefox.exe
*
* @param _IN_PATH
* The string containing the path.
* @param _OUT_PATH
* The register to store the path to.
*
* $R7 = counter for the outer loop's EnumRegKey
* $R8 = return value from ReadRegStr
* $R9 = _IN_PATH and _OUT_PATH
*/
!macro GetPathFromString
!ifndef ${_MOZFUNC_UN}GetPathFromString
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}GetPathFromString "!insertmacro ${_MOZFUNC_UN}GetPathFromStringCall"
Function ${_MOZFUNC_UN}GetPathFromString
Exch $R9
Push $R8
Push $R7
StrCpy $R7 0 ; Set the counter to 0.
; Handle quoted paths with arguments.
StrCpy $R8 $R9 1 ; Copy the first char.
StrCmp $R8 '"' +2 +1 ; Is it a "?
StrCmp $R8 "'" +1 +9 ; Is it a '?
StrCpy $R9 $R9 "" 1 ; Remove the first char.
IntOp $R7 $R7 + 1 ; Increment the counter.
StrCpy $R8 $R9 1 $R7 ; Starting from the counter copy the next char.
StrCmp $R8 "" end +1 ; Are there no more chars?
StrCmp $R8 '"' +2 +1 ; Is it a " char?
StrCmp $R8 "'" +1 -4 ; Is it a ' char?
StrCpy $R9 $R9 $R7 ; Copy chars up to the counter.
GoTo end
; Handle DefaultIcon paths. DefaultIcon paths are not quoted and end with
; a , and a number.
IntOp $R7 $R7 - 1 ; Decrement the counter.
StrCpy $R8 $R9 1 $R7 ; Copy one char from the end minus the counter.
StrCmp $R8 '' +4 +1 ; Are there no more chars?
StrCmp $R8 ',' +1 -3 ; Is it a , char?
StrCpy $R9 $R9 $R7 ; Copy chars up to the end minus the counter.
GoTo end
; Handle unquoted paths with arguments. An unquoted path with arguments
; must be an 8dot3 path.
StrCpy $R7 -1 ; Set the counter to -1 so it will start at 0.
IntOp $R7 $R7 + 1 ; Increment the counter.
StrCpy $R8 $R9 1 $R7 ; Starting from the counter copy the next char.
StrCmp $R8 "" end +1 ; Are there no more chars?
StrCmp $R8 " " +1 -3 ; Is it a space char?
StrCpy $R9 $R9 $R7 ; Copy chars up to the counter.
end:
ClearErrors
Pop $R7
Pop $R8
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro GetPathFromStringCall _IN_PATH _OUT_PATH
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_IN_PATH}"
Call GetPathFromString
Pop ${_OUT_PATH}
!verbose pop
!macroend
!macro un.GetPathFromStringCall _IN_PATH _OUT_PATH
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_IN_PATH}"
Call un.GetPathFromString
Pop ${_OUT_PATH}
!verbose pop
!macroend
!macro un.GetPathFromString
!ifndef un.GetPathFromString
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro GetPathFromString
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
/**
* Removes the quotes from each end of a string if present.
*
* @param _IN_PATH
* The string containing the path.
* @param _OUT_PATH
* The register to store the long path.
*
* $R7 = storage for single character comparison
* $R8 = storage for _IN_PATH
* $R9 = _IN_PATH and _OUT_PATH
*/
!macro RemoveQuotesFromPath
!ifndef ${_MOZFUNC_UN}RemoveQuotesFromPath
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}RemoveQuotesFromPath "!insertmacro ${_MOZFUNC_UN}RemoveQuotesFromPathCall"
Function ${_MOZFUNC_UN}RemoveQuotesFromPath
Exch $R9
Push $R8
Push $R7
StrCpy $R7 "$R9" 1
StrCmp $R7 "$\"" +1 +2
StrCpy $R9 "$R9" "" 1
StrCpy $R7 "$R9" "" -1
StrCmp $R7 "$\"" +1 +2
StrCpy $R9 "$R9" -1
Pop $R7
Pop $R8
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro RemoveQuotesFromPathCall _IN_PATH _OUT_PATH
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_IN_PATH}"
Call RemoveQuotesFromPath
Pop ${_OUT_PATH}
!verbose pop
!macroend
!macro un.RemoveQuotesFromPathCall _IN_PATH _OUT_PATH
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_IN_PATH}"
Call un.RemoveQuotesFromPath
Pop ${_OUT_PATH}
!verbose pop
!macroend
!macro un.RemoveQuotesFromPath
!ifndef un.RemoveQuotesFromPath
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro RemoveQuotesFromPath
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
/**
* Returns the long path for an existing file or directory. GetLongPathNameA
* may not be available on Win95 if Microsoft Layer for Unicode is not
* installed and GetFullPathName only returns a long path for the last file or
* directory that doesn't end with a \ in the path that it is passed. If the
* path does not exist on the file system this will return an empty string. To
* provide a consistent result trailing back-slashes are always removed.
*
* Note: 1024 used by GetLongPathNameA is the maximum NSIS string length.
*
* @param _IN_PATH
* The string containing the path.
* @param _OUT_PATH
* The register to store the long path.
*
* $R4 = counter value when the previous \ was found
* $R5 = directory or file name found during loop
* $R6 = return value from GetLongPathNameA and loop counter
* $R7 = long path from GetLongPathNameA and single char from path for comparison
* $R8 = storage for _IN_PATH
* $R9 = _IN_PATH _OUT_PATH
*/
!macro GetLongPath
!ifndef ${_MOZFUNC_UN}GetLongPath
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}GetLongPath "!insertmacro ${_MOZFUNC_UN}GetLongPathCall"
Function ${_MOZFUNC_UN}GetLongPath
Exch $R9
Push $R8
Push $R7
Push $R6
Push $R5
Push $R4
ClearErrors
StrCpy $R8 "$R9"
StrCpy $R9 ""
GetFullPathName $R8 "$R8"
IfErrors end_GetLongPath +1 ; If the path doesn't exist return an empty string.
; Remove trailing \'s from the path.
StrCpy $R6 "$R8" "" -1
StrCmp $R6 "\" +1 +2
StrCpy $R9 "$R8" -1
System::Call 'kernel32::GetLongPathNameA(t r18, t .r17, i 1024)i .r16'
StrCmp "$R7" "" +4 +1 ; Empty string when GetLongPathNameA is not present.
StrCmp $R6 0 +3 +1 ; Should never equal 0 since the path exists.
StrCpy $R9 "$R7"
GoTo end_GetLongPath
; Do it the hard way.
StrCpy $R4 0 ; Stores the position in the string of the last \ found.
StrCpy $R6 -1 ; Set the counter to -1 so it will start at 0.
loop_GetLongPath:
IntOp $R6 $R6 + 1 ; Increment the counter.
StrCpy $R7 $R8 1 $R6 ; Starting from the counter copy the next char.
StrCmp $R7 "" +2 +1 ; Are there no more chars?
StrCmp $R7 "\" +1 -3 ; Is it a \?
; Copy chars starting from the previously found \ to the counter.
StrCpy $R5 $R8 $R6 $R4
; If this is the first \ found we want to swap R9 with R5 so a \ will
; be appended to the drive letter and colon (e.g. C: will become C:\).
StrCmp $R4 0 +1 +3
StrCpy $R9 $R5
StrCpy $R5 ""
GetFullPathName $R9 "$R9\$R5"
StrCmp $R7 "" end_GetLongPath +1 ; Are there no more chars?
; Store the counter for the current \ and prefix it for StrCpy operations.
StrCpy $R4 "+$R6"
IntOp $R6 $R6 + 1 ; Increment the counter so we skip over the \.
StrCpy $R8 $R8 "" $R6 ; Copy chars starting from the counter to the end.
StrCpy $R6 -1 ; Reset the counter to -1 so it will start over at 0.
GoTo loop_GetLongPath
end_GetLongPath:
ClearErrors
Pop $R4
Pop $R5
Pop $R6
Pop $R7
Pop $R8
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro GetLongPathCall _IN_PATH _OUT_PATH
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_IN_PATH}"
Call GetLongPath
Pop ${_OUT_PATH}
!verbose pop
!macroend
!macro un.GetLongPathCall _IN_PATH _OUT_PATH
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_IN_PATH}"
Call un.GetLongPath
Pop ${_OUT_PATH}
!verbose pop
!macroend
!macro un.GetLongPath
!ifndef un.GetLongPath
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro GetLongPath
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
################################################################################
# Macros for cleaning up the registry and file system
/**
* Removes registry keys that reference this install location and for paths that
* no longer exist. This uses SHCTX to determine the registry hive so you must
* call SetShellVarContext first.
*
* @param _KEY
* The registry subkey (typically this will be Software\Mozilla).
*
* XXXrstrong - there is the potential for Key: Software/Mozilla/AppName,
* ValueName: CurrentVersion, ValueData: AppVersion to reference a key that is
* no longer available due to this cleanup. This should be no worse than prior
* to this reg cleanup since the referenced key would be for an app that is no
* longer installed on the system.
*
* $R1 = stores the long path to $INSTDIR
* $R2 = return value from the stack from the GetParent and GetLongPath macros
* $R3 = return value from the outer loop's EnumRegKey
* $R4 = return value from the inner loop's EnumRegKey
* $R5 = return value from ReadRegStr
* $R6 = counter for the outer loop's EnumRegKey
* $R7 = counter for the inner loop's EnumRegKey
* $R8 = return value from the stack from the RemoveQuotesFromPath macro
* $R9 = _KEY
*/
!macro RegCleanMain
!ifndef ${_MOZFUNC_UN}RegCleanMain
!define _MOZFUNC_UN_TMP ${_MOZFUNC_UN}
!insertmacro ${_MOZFUNC_UN_TMP}GetParent
!insertmacro ${_MOZFUNC_UN_TMP}GetLongPath
!insertmacro ${_MOZFUNC_UN_TMP}RemoveQuotesFromPath
!undef _MOZFUNC_UN
!define _MOZFUNC_UN ${_MOZFUNC_UN_TMP}
!undef _MOZFUNC_UN_TMP
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}RegCleanMain "!insertmacro ${_MOZFUNC_UN}RegCleanMainCall"
Function ${_MOZFUNC_UN}RegCleanMain
Exch $R9
Push $R8
Push $R7
Push $R6
Push $R5
Push $R4
Push $R3
Push $R2
Push $R1
${${_MOZFUNC_UN}GetLongPath} "$INSTDIR" $R1
StrCpy $R6 0 ; set the counter for the outer loop to 0
outerloop:
EnumRegKey $R3 SHCTX $R9 $R6
StrCmp $R3 "" end +1 ; if empty there are no more keys to enumerate
IntOp $R6 $R6 + 1 ; increment the outer loop's counter
ClearErrors
ReadRegStr $R5 SHCTX "$R9\$R3\bin" "PathToExe"
IfErrors 0 outercontinue
StrCpy $R7 0 ; set the counter for the inner loop to 0
innerloop:
EnumRegKey $R4 SHCTX "$R9\$R3" $R7
StrCmp $R4 "" outerloop +1 ; if empty there are no more keys to enumerate
IntOp $R7 $R7 + 1 ; increment the inner loop's counter
ClearErrors
ReadRegStr $R5 SHCTX "$R9\$R3\$R4\Main" "PathToExe"
IfErrors innerloop
${${_MOZFUNC_UN}RemoveQuotesFromPath} "$R5" $R8
${${_MOZFUNC_UN}GetParent} "$R8" $R2
${${_MOZFUNC_UN}GetLongPath} "$R2" $R2
IfFileExists "$R2" +1 innerloop
StrCmp "$R2" "$R1" +1 innerloop
ClearErrors
DeleteRegKey SHCTX "$R9\$R3\$R4"
IfErrors innerloop
IntOp $R7 $R7 - 1 ; decrement the inner loop's counter when the key is deleted successfully.
ClearErrors
DeleteRegKey /ifempty SHCTX "$R9\$R3"
IfErrors innerloop outerdecrement
outercontinue:
${${_MOZFUNC_UN}RemoveQuotesFromPath} "$R5" $R8
${${_MOZFUNC_UN}GetParent} "$R8" $R2
${${_MOZFUNC_UN}GetLongPath} "$R2" $R2
IfFileExists "$R2" +1 outerloop
StrCmp "$R2" "$R1" +1 outerloop
ClearErrors
DeleteRegKey SHCTX "$R9\$R3"
IfErrors outerloop
outerdecrement:
IntOp $R6 $R6 - 1 ; decrement the outer loop's counter when the key is deleted successfully.
GoTo outerloop
end:
ClearErrors
Pop $R1
Pop $R2
Pop $R3
Pop $R4
Pop $R5
Pop $R6
Pop $R7
Pop $R8
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro RegCleanMainCall _KEY
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_KEY}"
Call RegCleanMain
!verbose pop
!macroend
!macro un.RegCleanMainCall _KEY
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_KEY}"
Call un.RegCleanMain
!verbose pop
!macroend
!macro un.RegCleanMain
!ifndef un.RegCleanMain
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro RegCleanMain
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
/**
* Removes all registry keys from \Software\Windows\CurrentVersion\Uninstall
* that reference this install location. This uses SHCTX to determine the
* registry hive so you must call SetShellVarContext first.
*
* $R4 = stores the long path to $INSTDIR
* $R5 = return value from ReadRegStr
* $R6 = string for the base reg key (e.g. Software\Microsoft\Windows\CurrentVersion\Uninstall)
* $R7 = return value from EnumRegKey
* $R8 = counter for EnumRegKey
* $R9 = return value from the stack from the RemoveQuotesFromPath and GetLongPath macros
*/
!macro RegCleanUninstall
!ifndef ${_MOZFUNC_UN}RegCleanUninstall
!define _MOZFUNC_UN_TMP ${_MOZFUNC_UN}
!insertmacro ${_MOZFUNC_UN_TMP}GetLongPath
!insertmacro ${_MOZFUNC_UN_TMP}RemoveQuotesFromPath
!undef _MOZFUNC_UN
!define _MOZFUNC_UN ${_MOZFUNC_UN_TMP}
!undef _MOZFUNC_UN_TMP
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}RegCleanUninstall "!insertmacro ${_MOZFUNC_UN}RegCleanUninstallCall"
Function ${_MOZFUNC_UN}RegCleanUninstall
Push $R9
Push $R8
Push $R7
Push $R6
Push $R5
Push $R4
${${_MOZFUNC_UN}GetLongPath} "$INSTDIR" $R4
StrCpy $R6 "Software\Microsoft\Windows\CurrentVersion\Uninstall"
StrCpy $R7 ""
StrCpy $R8 0
loop:
EnumRegKey $R7 SHCTX $R6 $R8
StrCmp $R7 "" end +1
IntOp $R8 $R8 + 1 ; Increment the counter
ClearErrors
ReadRegStr $R5 SHCTX "$R6\$R7" "InstallLocation"
IfErrors loop
${${_MOZFUNC_UN}RemoveQuotesFromPath} "$R5" $R9
${${_MOZFUNC_UN}GetLongPath} "$R9" $R9
StrCmp "$R9" "$R4" +1 loop
ClearErrors
DeleteRegKey SHCTX "$R6\$R7"
IfErrors loop
IntOp $R8 $R8 - 1 ; Decrement the counter on successful deletion
GoTo loop
end:
ClearErrors
Pop $R4
Pop $R5
Pop $R6
Pop $R7
Pop $R8
Pop $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro RegCleanUninstallCall
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call RegCleanUninstall
!verbose pop
!macroend
!macro un.RegCleanUninstallCall
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call un.RegCleanUninstall
!verbose pop
!macroend
!macro un.RegCleanUninstall
!ifndef un.RegCleanUninstall
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro RegCleanUninstall
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
/**
* Removes an application specific handler registry key under Software\Classes
* for both HKCU and HKLM when its open command refers to this install
* location or the install location doesn't exist.
*
* @param _HANDLER_NAME
* The registry name for the handler.
*
* $R7 = stores the long path to the $INSTDIR
* $R8 = stores the path to the open command's parent directory
* $R9 = _HANDLER_NAME
*/
!macro RegCleanAppHandler
!ifndef ${_MOZFUNC_UN}RegCleanAppHandler
!define _MOZFUNC_UN_TMP ${_MOZFUNC_UN}
!insertmacro ${_MOZFUNC_UN_TMP}GetLongPath
!insertmacro ${_MOZFUNC_UN_TMP}GetParent
!insertmacro ${_MOZFUNC_UN_TMP}GetPathFromString
!undef _MOZFUNC_UN
!define _MOZFUNC_UN ${_MOZFUNC_UN_TMP}
!undef _MOZFUNC_UN_TMP
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}RegCleanAppHandler "!insertmacro ${_MOZFUNC_UN}RegCleanAppHandlerCall"
Function ${_MOZFUNC_UN}RegCleanAppHandler
Exch $R9
Push $R8
Push $R7
ClearErrors
ReadRegStr $R8 HKCU "Software\Classes\$R9\shell\open\command" ""
IfErrors next +1
${${_MOZFUNC_UN}GetPathFromString} "$R8" $R8
${${_MOZFUNC_UN}GetParent} "$R8" $R8
IfFileExists "$R8" +3 +1
DeleteRegKey HKCU "Software\Classes\$R9"
GoTo next
${${_MOZFUNC_UN}GetLongPath} "$R8" $R8
${${_MOZFUNC_UN}GetLongPath} "$INSTDIR" $R7
StrCmp "$R7" "$R8" +1 next
DeleteRegKey HKCU "Software\Classes\$R9"
next:
ReadRegStr $R8 HKLM "Software\Classes\$R9\shell\open\command" ""
IfErrors end
${${_MOZFUNC_UN}GetPathFromString} "$R8" $R8
${${_MOZFUNC_UN}GetParent} "$R8" $R8
IfFileExists "$R8" +3 +1
DeleteRegKey HKLM "Software\Classes\$R9"
GoTo end
${${_MOZFUNC_UN}GetLongPath} "$R8" $R8
${${_MOZFUNC_UN}GetLongPath} "$INSTDIR" $R7
StrCmp "$R7" "$R8" +1 end
DeleteRegKey HKLM "Software\Classes\$R9"
end:
Pop $R7
Pop $R8
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro RegCleanAppHandlerCall _HANDLER_NAME
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_HANDLER_NAME}"
Call RegCleanAppHandler
!verbose pop
!macroend
!macro un.RegCleanAppHandlerCall _HANDLER_NAME
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_HANDLER_NAME}"
Call un.RegCleanAppHandler
!verbose pop
!macroend
!macro un.RegCleanAppHandler
!ifndef un.RegCleanAppHandler
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro RegCleanAppHandler
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
/**
* Cleans up the registry for a protocol handler when its open command
* refers to this install location. For HKCU the registry key is deleted
* and for HKLM the values set by the application are deleted.
*
* @param _HANDLER_NAME
* The registry name for the handler.
*
* $R7 = stores the long path to $INSTDIR
* $R8 = stores the the long path to the open command's parent directory
* $R9 = _HANDLER_NAME
*/
!macro un.RegCleanProtocolHandler
!ifndef un.RegCleanProtocolHandler
!insertmacro un.GetLongPath
!insertmacro un.GetParent
!insertmacro un.GetPathFromString
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define un.RegCleanProtocolHandler "!insertmacro un.RegCleanProtocolHandlerCall"
Function un.RegCleanProtocolHandler
Exch $R9
Push $R8
Push $R7
ReadRegStr $R8 HKCU "Software\Classes\$R9\shell\open\command" ""
${un.GetLongPath} "$INSTDIR" $R7
StrCmp "$R8" "" next +1
${un.GetPathFromString} "$R8" $R8
${un.GetParent} "$R8" $R8
${un.GetLongPath} "$R8" $R8
StrCmp "$R7" "$R8" +1 next
DeleteRegKey HKCU "Software\Classes\$R9"
next:
ReadRegStr $R8 HKLM "Software\Classes\$R9\shell\open\command" ""
StrCmp "$R8" "" end +1
${un.GetLongPath} "$INSTDIR" $R7
${un.GetPathFromString} "$R8" $R8
${un.GetParent} "$R8" $R8
${un.GetLongPath} "$R8" $R8
StrCmp "$R7" "$R8" +1 end
DeleteRegValue HKLM "Software\Classes\$R9\DefaultIcon" ""
DeleteRegValue HKLM "Software\Classes\$R9\shell\open" ""
DeleteRegValue HKLM "Software\Classes\$R9\shell\ddeexec" ""
DeleteRegValue HKLM "Software\Classes\$R9\shell\ddeexec\Application" ""
DeleteRegValue HKLM "Software\Classes\$R9\shell\ddeexec\Topic" ""
end:
Pop $R7
Pop $R8
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro un.RegCleanProtocolHandlerCall _HANDLER_NAME
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_HANDLER_NAME}"
Call un.RegCleanProtocolHandler
!verbose pop
!macroend
/**
* Cleans up the registry for a file handler when the passed in value equals
* the default value for the file handler. For HKCU the registry key is deleted
* and for HKLM the default value is deleted.
*
* @param _HANDLER_NAME
* The registry name for the handler.
* @param _DEFAULT_VALUE
* The value to check for against the handler's default value.
*
* $R6 = stores the long path to $INSTDIR
* $R7 = _DEFAULT_VALUE
* $R9 = _HANDLER_NAME
*/
!macro RegCleanFileHandler
!ifndef ${_MOZFUNC_UN}RegCleanFileHandler
!define _MOZFUNC_UN_TMP ${_MOZFUNC_UN}
!insertmacro ${_MOZFUNC_UN_TMP}GetLongPath
!insertmacro ${_MOZFUNC_UN_TMP}GetParent
!insertmacro ${_MOZFUNC_UN_TMP}GetPathFromString
!undef _MOZFUNC_UN
!define _MOZFUNC_UN ${_MOZFUNC_UN_TMP}
!undef _MOZFUNC_UN_TMP
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}RegCleanFileHandler "!insertmacro ${_MOZFUNC_UN}RegCleanFileHandlerCall"
Function ${_MOZFUNC_UN}RegCleanFileHandler
Exch $R9
Exch 1
Exch $R8
Push $R7
ReadRegStr $R7 HKCU "Software\Classes\$R9" ""
StrCmp "$R7" "$R8" +1 +2
DeleteRegKey HKCU "Software\Classes\$R9"
ReadRegStr $R7 HKLM "Software\Classes\$R9" ""
StrCmp "$R7" "$R8" +1 +2
DeleteRegValue HKLM "Software\Classes\$R9" ""
ClearErrors
Pop $R7
Exch $R8
Exch 1
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro RegCleanFileHandlerCall _HANDLER_NAME _DEFAULT_VALUE
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_DEFAULT_VALUE}"
Push "${_HANDLER_NAME}"
Call RegCleanFileHandler
!verbose pop
!macroend
!macro un.RegCleanFileHandlerCall _HANDLER_NAME _DEFAULT_VALUE
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_DEFAULT_VALUE}"
Push "${_HANDLER_NAME}"
Call un.RegCleanFileHandler
!verbose pop
!macroend
!macro un.RegCleanFileHandler
!ifndef un.RegCleanFileHandler
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro RegCleanFileHandler
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
/**
* Checks if a handler's open command points to this installation directory.
*
* @param _HANDLER_NAME
* The registry name for the handler.
* @param _RESULT
* true if it is the handler's open command points to this
* installation directory and false if it does not.
*
* $R7 = stores the value of the open command and the path macros return values
* $R8 = stores the handler's registry key name
* $R9 = _DEFAULT_VALUE and _RESULT
*/
!macro IsHandlerForInstallDir
!ifndef ${_MOZFUNC_UN}IsHandlerForInstallDir
!define _MOZFUNC_UN_TMP ${_MOZFUNC_UN}
!insertmacro ${_MOZFUNC_UN_TMP}GetLongPath
!insertmacro ${_MOZFUNC_UN_TMP}GetParent
!insertmacro ${_MOZFUNC_UN_TMP}GetPathFromString
!undef _MOZFUNC_UN
!define _MOZFUNC_UN ${_MOZFUNC_UN_TMP}
!undef _MOZFUNC_UN_TMP
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}IsHandlerForInstallDir "!insertmacro ${_MOZFUNC_UN}IsHandlerForInstallDirCall"
Function ${_MOZFUNC_UN}IsHandlerForInstallDir
Exch $R9
Push $R8
Push $R7
StrCpy $R8 "$R9"
StrCpy $R9 "false"
ReadRegStr $R7 HKCR "$R8\shell\open\command" ""
StrCmp "$R7" "" end
${GetPathFromString} "$R7" $R7
${GetParent} "$R7" $R7
${GetLongPath} "$R7" $R7
StrCmp "$R7" "$INSTDIR" +1 end
StrCpy $R9 "true"
end:
ClearErrors
Pop $R7
Pop $R8
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro IsHandlerForInstallDirCall _HANDLER_NAME _RESULT
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_HANDLER_NAME}"
Call IsHandlerForInstallDir
Pop "${_RESULT}"
!verbose pop
!macroend
!macro un.IsHandlerForInstallDirCall _HANDLER_NAME _RESULT
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_HANDLER_NAME}"
Call un.IsHandlerForInstallDir
Pop "${_RESULT}"
!verbose pop
!macroend
!macro un.IsHandlerForInstallDir
!ifndef un.IsHandlerForInstallDir
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro IsHandlerForInstallDir
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
/**
* If present removes the VirtualStore directory for this installation. Uses the
* program files directory path and the current install location to determine
* the sub-directory in the VirtualStore directory.
*/
!macro CleanVirtualStore
!ifndef ${_MOZFUNC_UN}CleanVirtualStore
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}CleanVirtualStore "!insertmacro ${_MOZFUNC_UN}CleanVirtualStoreCall"
Function ${_MOZFUNC_UN}CleanVirtualStore
Push $R9
Push $R8
Push $R7
StrLen $R9 "$INSTDIR"
; Get the installation's directory name including the preceding slash
start:
IntOp $R8 $R8 - 1
IntCmp $R8 -$R9 end end +1
StrCpy $R7 "$INSTDIR" 1 $R8
StrCmp $R7 "\" +1 start
StrCpy $R9 "$INSTDIR" "" $R8
ClearErrors
GetFullPathName $R8 "$PROGRAMFILES$R9"
IfErrors end
GetFullPathName $R7 "$INSTDIR"
; Compare the installation's directory path with the path created by
; concatenating the installation's directory name and the path to the
; program files directory.
StrCmp "$R7" "$R8" +1 end
StrCpy $R8 "$PROGRAMFILES" "" 2 ; Remove the drive letter and colon
StrCpy $R7 "$PROFILE\AppData\Local\VirtualStore$R8$R9"
IfFileExists "$R7" 0 end
RmDir /r "$R7"
end:
ClearErrors
Pop $R7
Pop $R8
Pop $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro CleanVirtualStoreCall
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call CleanVirtualStore
!verbose pop
!macroend
!macro un.CleanVirtualStoreCall
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call un.CleanVirtualStore
!verbose pop
!macroend
!macro un.CleanVirtualStore
!ifndef un.CleanVirtualStore
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro CleanVirtualStore
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
/**
* Deletes all relative profiles specified in an application's profiles.ini and
* performs various other cleanup.
*
* @param _REL_PROFILE_PATH
* The relative path to the profile directory.
*
* $R6 = value of IsRelative read from profiles.ini
* $R7 = value of Path to profile read from profiles.ini
* $R8 = counter for reading profiles (e.g. Profile0, Profile1, etc.)
* $R9 = _REL_PROFILE_PATH
*/
!macro DeleteRelativeProfiles
!ifndef ${_MOZFUNC_UN}DeleteRelativeProfiles
!define _MOZFUNC_UN_TMP ${_MOZFUNC_UN}
!insertmacro ${_MOZFUNC_UN_TMP}WordReplace
!undef _MOZFUNC_UN
!define _MOZFUNC_UN ${_MOZFUNC_UN_TMP}
!undef _MOZFUNC_UN_TMP
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}DeleteRelativeProfiles "!insertmacro ${_MOZFUNC_UN}DeleteRelativeProfilesCall"
Function ${_MOZFUNC_UN}DeleteRelativeProfiles
Exch $R9
Push $R8
Push $R7
Push $R6
SetShellVarContext current
StrCpy $R8 -1
loop:
IntOp $R8 $R8 + 1 ; Increment the counter.
ReadINIStr $R7 "$APPDATA\$R9\profiles.ini" "Profile$R8" "Path"
IfErrors end +1
; Only remove relative profiles
ReadINIStr $R6 "$APPDATA\$R9\profiles.ini" "Profile$R8" "IsRelative"
StrCmp "$R6" "1" +1 loop
; Relative paths in profiles.ini use / as a separator
${${_MOZFUNC_UN}WordReplace} "$R7" "/" "\" "+" $R7
IfFileExists "$LOCALAPPDATA\$R9\$R7" +1 +2
RmDir /r "$LOCALAPPDATA\$R9\$R7"
IfFileExists "$APPDATA\$R9\$R7" +1 +2
RmDir /r "$APPDATA\$R9\$R7"
GoTo loop
end:
; Remove profiles directory under LOCALAPPDATA (e.g. cache, etc.) since
; they are at times abandoned.
RmDir /r "$LOCALAPPDATA\$R9\Profiles"
RmDir /r "$APPDATA\$R9\Crash Reports"
Delete "$APPDATA\$R9\profiles.ini"
Delete "$APPDATA\$R9\console.log"
Delete "$APPDATA\$R9\pluginreg.dat"
Pop $R6
Pop $R7
Pop $R8
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro DeleteRelativeProfilesCall _REL_PROFILE_PATH
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_REL_PROFILE_PATH}"
Call DeleteRelativeProfiles
!verbose pop
!macroend
!macro un.DeleteRelativeProfilesCall _REL_PROFILE_PATH
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_REL_PROFILE_PATH}"
Call un.DeleteRelativeProfiles
!verbose pop
!macroend
!macro un.DeleteRelativeProfiles
!ifndef un.DeleteRelativeProfiles
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro DeleteRelativeProfiles
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
################################################################################
# Macros for parsing and updating the uninstall.log and removed-files.log
/**
* Updates the uninstall.log with new files added by software update.
*
* When modifying this macro be aware that LineFind uses all registers except
* $R0-$R3 so be cautious. Callers of this macro are not affected.
*/
!macro UpdateUninstallLog
!ifndef UpdateUninstallLog
!insertmacro FileJoin
!insertmacro LineFind
!insertmacro TextCompareNoDetails
!insertmacro TrimNewLines
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define UpdateUninstallLog "!insertmacro UpdateUninstallLogCall"
Function UpdateUninstallLog
Push $R3
Push $R2
Push $R1
Push $R0
ClearErrors
GetFullPathName $R3 "$INSTDIR\uninstall"
IfFileExists "$R3\uninstall.update" +2 0
Return
${LineFind} "$R3\uninstall.update" "" "1:-1" "CleanupUpdateLog"
GetTempFileName $R2 "$R3"
FileOpen $R1 $R2 w
${TextCompareNoDetails} "$R3\uninstall.update" "$R3\uninstall.log" "SlowDiff" "CreateUpdateDiff"
FileClose $R1
IfErrors +2 0
${FileJoin} "$R3\uninstall.log" "$R2" "$R3\uninstall.log"
${DeleteFile} "$R2"
ClearErrors
Pop $R0
Pop $R1
Pop $R2
Pop $R3
FunctionEnd
; This callback MUST use labels vs. relative line numbers.
Function CleanupUpdateLog
StrCpy $R2 "$R9" 12
StrCmp "$R2" "EXECUTE ADD " +1 skip
StrCpy $R9 "$R9" "" 12
Push $R6
Push $R5
Push $R4
StrCpy $R4 "" ; Initialize to an empty string.
StrCpy $R6 -1 ; Set the counter to -1 so it will start at 0.
loop:
IntOp $R6 $R6 + 1 ; Increment the counter.
StrCpy $R5 $R9 1 $R6 ; Starting from the counter copy the next char.
StrCmp $R5 "" copy ; Are there no more chars?
StrCmp $R5 "/" +1 +2 ; Is the char a /?
StrCpy $R5 "\" ; Replace the char with a \.
StrCpy $R4 "$R4$R5"
GoTo loop
copy:
StrCpy $R9 "File: \$R4"
Pop $R6
Pop $R5
Pop $R4
GoTo end
skip:
StrCpy $0 "SkipWrite"
end:
Push $0
FunctionEnd
Function CreateUpdateDiff
${TrimNewLines} "$9" $9
StrCmp $9 "" +2 +1
FileWrite $R1 "$9$\r$\n"
Push 0
FunctionEnd
!verbose pop
!endif
!macroend
!macro UpdateUninstallLogCall
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call UpdateUninstallLog
!verbose pop
!macroend
/**
* Updates the uninstall.log with entries from uninstall.bak. The uninstall.bak
* is the uninstall.log renamed to uninstall.bak at the beginning of the
* installation
*
* When modifying this macro be aware that LineFind uses all registers except
* $R0-$R3 so be cautious. Callers of this macro are not affected.
*/
!macro UpdateFromPreviousLog
!ifndef UpdateFromPreviousLog
!insertmacro FileJoin
!insertmacro GetTime
!insertmacro TextCompareNoDetails
!insertmacro TrimNewLines
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define UpdateFromPreviousLog "!insertmacro UpdateFromPreviousLogCall"
Function UpdateFromPreviousLog
Push $R9
Push $R8
Push $R7
Push $R6
Push $R5
Push $R4
Push $R3
Push $R2
Push $R1
Push $R0
Push $9
; Diff and add missing entries from the previous file log if it exists
IfFileExists "$INSTDIR\uninstall\uninstall.bak" +1 end
StrCpy $R0 "$INSTDIR\uninstall\uninstall.log"
StrCpy $R1 "$INSTDIR\uninstall\uninstall.bak"
GetTempFileName $R2
FileOpen $R3 $R2 w
${TextCompareNoDetails} "$R1" "$R0" "SlowDiff" "UpdateFromPreviousLog_AddToLog"
FileClose $R3
IfErrors +2
${FileJoin} "$INSTDIR\uninstall\uninstall.log" "$R2" "$INSTDIR\uninstall\uninstall.log"
${DeleteFile} "$INSTDIR\uninstall\uninstall.bak"
${DeleteFile} "$R2"
end:
Pop $9
Pop $R0
Pop $R1
Pop $R2
Pop $R3
Pop $R4
Pop $R5
Pop $R6
Pop $R7
Pop $R8
Push $R9
FunctionEnd
Function UpdateFromPreviousLog_AddToLog
${TrimNewLines} "$9" $9
StrCmp $9 "" end +1
FileWrite $R3 "$9$\r$\n"
${LogMsg} "Added To Uninstall Log: $9"
end:
Push 0
FunctionEnd
!verbose pop
!endif
!macroend
!macro UpdateFromPreviousLogCall
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call UpdateFromPreviousLog
!verbose pop
!macroend
/**
* Parses the removed-files.log to remove files, and directories prior to
* installing.
*
* When modifying this macro be aware that LineFind uses all registers except
* $R0-$R3 so be cautious. Callers of this macro are not affected.
*/
!macro ParseRemovedFilesLog
!ifndef ParseRemovedFilesLog
!insertmacro LineFind
!insertmacro TrimNewLines
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ParseRemovedFilesLog "!insertmacro ParseRemovedFilesLogCall"
Function ParseRemovedFilesLog
Push $R9
Push $R8
Push $R7
Push $R6
Push $R5
Push $R4
Push $R3
Push $R2
Push $R1
Push $R0
IfFileExists "$EXEDIR\removed-files.log" +1 end
${LogHeader} "Removing Obsolete Files and Directories"
${LineFind} "$EXEDIR\removed-files.log" "/NUL" "1:-1" "ParseRemovedFilesLog_RemoveFile"
${LineFind} "$EXEDIR\removed-files.log" "/NUL" "1:-1" "ParseRemovedFilesLog_RemoveDir"
end:
Pop $R0
Pop $R1
Pop $R2
Pop $R3
Pop $R4
Pop $R5
Pop $R6
Pop $R7
Pop $R8
Pop $R9
FunctionEnd
Function ParseRemovedFilesLog_RemoveFile
${TrimNewLines} "$R9" $R9
StrCpy $R1 "$R9" 5
StrCmp $R1 "File:" +1 end
StrCpy $R9 "$R9" "" 6
IfFileExists "$INSTDIR$R9" +1 end
ClearErrors
${DeleteFile} "$INSTDIR$R9"
IfErrors +3 +1
${LogMsg} "Deleted File: $INSTDIR$R9"
GoTo end
ClearErrors
Rename "$INSTDIR$R9" "$INSTDIR$R9.moz-delete"
IfErrors +1 reboot_delete
; Original file will be deleted on reboot
Delete /REBOOTOK "$INSTDIR$R9"
${LogMsg} "Delayed Delete File (Reboot Required): $INSTDIR$R9"
GoTo end
; Renamed file will be deleted on reboot
reboot_delete:
Delete /REBOOTOK "$INSTDIR$R9.moz-delete"
${LogMsg} "Delayed Delete File (Reboot Required): $INSTDIR$R9.moz-delete"
GoTo end
end:
ClearErrors
Push 0
FunctionEnd
; The xpinstall based installer removed directories even when they aren't
; empty so this does as well.
Function ParseRemovedFilesLog_RemoveDir
${TrimNewLines} "$R9" $R9
StrCpy $R1 "$R9" 4
StrCmp "$R1" "Dir:" +1 end
StrCpy $R9 "$R9" "" 5
StrCpy $R1 "$R9" "" -1
StrCmp "$R1" "\" +1 +2
StrCpy $R9 "$R9" -1
IfFileExists "$INSTDIR$R9" +1 end
ClearErrors
RmDir /r "$INSTDIR$R9"
IfErrors +1 +3
${LogMsg} "** ERROR Removing Directory: $INSTDIR$R9 **"
GoTo end
${LogMsg} "Removed Directory: $INSTDIR$R9"
end:
ClearErrors
Push 0
FunctionEnd
!verbose pop
!endif
!macroend
!macro ParseRemovedFilesLogCall
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call ParseRemovedFilesLog
!verbose pop
!macroend
/**
* Copies files from a source directory to a destination directory with logging
* to the uninstall.log. If any destination files are in use a reboot will be
* necessary to complete the installation and the reboot flag (see IfRebootFlag
* in the NSIS documentation).
*
* @param _PATH_TO_SOURCE
* Source path to copy the files from. This must not end with a \.
*
* @param _PATH_TO_DESTINATION
* Destination path to copy the files to. This must not end with a \.
*
* @param _PREFIX_ERROR_CREATEDIR
* Prefix for the directory creation error message. The directory path
* will be inserted below this string.
*
* @param _SUFFIX_ERROR_CREATEDIR
* Prefix for the directory creation error message. The directory path
* will be inserted above this string.
*
* $0 = destination file's parent directory used in the create_dir label
* $R0 = copied value from $R6 (e.g. _PATH_TO_SOURCE)
* $R1 = copied value from $R7 (e.g. _PATH_TO_DESTINATION)
* $R2 = string length of the path to source
* $R3 = relative path from the path to source
* $R4 = copied value from $R8 (e.g. _PREFIX_ERROR_CREATEDIR)
* $R5 = copied value from $R9 (e.g. _SUFFIX_ERROR_CREATEDIR)
* note: the LocateNoDetails macro uses these registers so we copy the values
* to other registers.
* $R6 = initially _PATH_TO_SOURCE and then set to "size" ($R6="" if directory,
* $R6="0" if file with /S=)"path\name" in callback
* $R7 = initially _PATH_TO_DESTINATION and then set to "name" in callback
* $R8 = initially _PREFIX_ERROR_CREATEDIR and then set to "path" in callback
* $R9 = initially _SUFFIX_ERROR_CREATEDIR and then set to "path\name" in
* callback
*/
!macro CopyFilesFromDir
!ifndef CopyFilesFromDir
!insertmacro LocateNoDetails
!insertmacro OnEndCommon
!insertmacro WordReplace
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define CopyFilesFromDir "!insertmacro CopyFilesFromDirCall"
Function CopyFilesFromDir
Exch $R9
Exch 1
Exch $R8
Exch 2
Exch $R7
Exch 3
Exch $R6
Push $R5
Push $R4
Push $R3
Push $R2
Push $R1
Push $R0
Push $0
StrCpy $R0 "$R6"
StrCpy $R1 "$R7"
StrCpy $R4 "$R8"
StrCpy $R5 "$R9"
StrLen $R2 $R0
${LocateNoDetails} "$R0" "/L=FD" "CopyFileCallback"
Pop $0
Pop $R0
Pop $R1
Pop $R2
Pop $R3
Pop $R4
Pop $R5
Exch $R6
Exch 3
Exch $R7
Exch 2
Exch $R8
Exch 1
Exch $R9
FunctionEnd
Function CopyFileCallback
StrCpy $R3 $R8 "" $R2 ; $R3 always begins with a \.
retry:
ClearErrors
StrCmp $R6 "" +1 copy_file
IfFileExists "$R1$R3\$R7" end +1
StrCpy $0 "$R1$R3\$R7"
create_dir:
ClearErrors
CreateDirectory "$0"
IfFileExists "$0" +1 err_create_dir ; protect against looping.
${LogMsg} "Created Directory: $0"
StrCmp $R6 "" end copy_file
err_create_dir:
${LogMsg} "** ERROR Creating Directory: $0 **"
MessageBox MB_RETRYCANCEL|MB_ICONQUESTION "$R4$\r$\n$\r$\n$0$\r$\n$\r$\n$R5" IDRETRY retry
${OnEndCommon}
Quit
copy_file:
StrCpy $0 "$R1$R3"
IfFileExists "$0" +1 create_dir
ClearErrors
${DeleteFile} "$R1$R3\$R7"
IfErrors +1 dest_clear
ClearErrors
Rename "$R1$R3\$R7" "$R1$R3\$R7.moz-delete"
IfErrors +1 reboot_delete
; file will replace destination file on reboot
Rename "$R9" "$R9.moz-upgrade"
CopyFiles /SILENT "$R9.moz-upgrade" "$R1$R3"
Rename /REBOOTOK "$R1$R3\$R7.moz-upgrade" "$R1$R3\$R7"
${LogMsg} "Copied File: $R1$R3\$R7.moz-upgrade"
${LogMsg} "Delayed Install File (Reboot Required): $R1$R3\$R7"
GoTo log_uninstall
; file will be deleted on reboot
reboot_delete:
CopyFiles /SILENT $R9 "$R1$R3"
Delete /REBOOTOK "$R1$R3\$R7.moz-delete"
${LogMsg} "Installed File: $R1$R3\$R7"
${LogMsg} "Delayed Delete File (Reboot Required): $R1$R3\$R7.moz-delete"
GoTo log_uninstall
; destination file doesn't exist - coast is clear
dest_clear:
CopyFiles /SILENT $R9 "$R1$R3"
${LogMsg} "Installed File: $R1$R3\$R7"
log_uninstall:
; If the file is installed into the installation directory remove the
; installation directory's path from the file path when writing to the
; uninstall.log so it will be a relative path. This allows the same
; helper.exe to be used with zip builds if we supply an uninstall.log.
${WordReplace} "$R1$R3\$R7" "$INSTDIR" "" "+" $R3
${LogUninstall} "File: $R3"
end:
Push 0
FunctionEnd
!verbose pop
!endif
!macroend
!macro CopyFilesFromDirCall _PATH_TO_SOURCE _PATH_TO_DESTINATION \
_PREFIX_ERROR_CREATEDIR _SUFFIX_ERROR_CREATEDIR
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_PATH_TO_SOURCE}"
Push "${_PATH_TO_DESTINATION}"
Push "${_PREFIX_ERROR_CREATEDIR}"
Push "${_SUFFIX_ERROR_CREATEDIR}"
Call CopyFilesFromDir
!verbose pop
!macroend
/**
* Parses the uninstall.log to unregister dll's, remove files, and remove
* empty directories for this installation.
*
* When modifying this macro be aware that LineFind uses all registers except
* $R0-$R3 so be cautious. Callers of this macro are not affected.
*/
!macro un.ParseUninstallLog
!ifndef un.ParseUninstallLog
!insertmacro un.LineFind
!insertmacro un.TrimNewLines
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define un.ParseUninstallLog "!insertmacro un.ParseUninstallLogCall"
Function un.ParseUninstallLog
Push $R9
Push $R8
Push $R7
Push $R6
Push $R5
Push $R4
Push $R3
Push $R2
Push $R1
Push $R0
Push $TmpVal
IfFileExists "$INSTDIR\uninstall\uninstall.log" +1 end
; Copy the uninstall log file to a temporary file
GetTempFileName $TmpVal
CopyFiles /SILENT /FILESONLY "$INSTDIR\uninstall\uninstall.log" "$TmpVal"
; Unregister DLL's
${un.LineFind} "$TmpVal" "/NUL" "1:-1" "un.UnRegDLLsCallback"
; Delete files
${un.LineFind} "$TmpVal" "/NUL" "1:-1" "un.RemoveFilesCallback"
; Remove empty directories
${un.LineFind} "$TmpVal" "/NUL" "1:-1" "un.RemoveDirsCallback"
; Delete the temporary uninstall log file
Delete /REBOOTOK "$TmpVal"
end:
Pop $TmpVal
Pop $R0
Pop $R1
Pop $R2
Pop $R3
Pop $R4
Pop $R5
Pop $R6
Pop $R7
Pop $R8
Pop $R9
FunctionEnd
Function un.RemoveFilesCallback
${un.TrimNewLines} "$R9" $R9
StrCpy $R1 "$R9" 5
StrCmp "$R1" "File:" +1 end
StrCpy $R9 "$R9" "" 6
StrCpy $R0 "$R9" 1
StrCpy $R1 "$INSTDIR$R9"
StrCmp "$R0" "\" +2 +1
StrCpy $R1 "$R9"
IfFileExists "$R1" +1 end
Delete "$R1"
IfErrors +1 end
ClearErrors
Rename "$R1" "$R1.moz-delete"
IfErrors +1 +3
Delete /REBOOTOK "$R1"
GoTo end
Delete /REBOOTOK "$R1.moz-delete"
end:
ClearErrors
Push 0
FunctionEnd
Function un.UnRegDLLsCallback
${un.TrimNewLines} "$R9" $R9
StrCpy $R1 "$R9" 7
StrCmp $R1 "DLLReg:" +1 end
StrCpy $R9 "$R9" "" 8
StrCpy $R0 "$R9" 1
StrCpy $R1 "$INSTDIR$R9"
StrCmp $R0 "\" +2 +1
StrCpy $R1 "$R9"
UnRegDLL $R1
end:
ClearErrors
Push 0
FunctionEnd
; Using locate will leave file handles open to some of the directories
; which will prevent the deletion of these directories. This parses the
; uninstall.log and uses the file entries to find / remove empty
; directories.
Function un.RemoveDirsCallback
${un.TrimNewLines} "$R9" $R9
StrCpy $R0 "$R9" 5 ; Copy the first five chars
StrCmp "$R0" "File:" +1 end
StrCpy $R9 "$R9" "" 6 ; Copy string starting after the 6th char
StrCpy $R0 "$R9" 1 ; Copy the first char
StrCpy $R1 "$INSTDIR$R9" ; Copy the install dir path and suffix it with the string
StrCmp "$R0" "\" loop ; If this is a relative path goto the loop
StrCpy $R1 "$R9" ; Already a full path so copy the string
loop:
${un.GetParent} "$R1" $R1 ; Get the parent directory for the path
StrCmp "$R1" "$INSTDIR" end ; If the directory is the install dir goto end
; We only try to remove empty directories but the Desktop, StartMenu, and
; QuickLaunch directories can be empty so guard against removing them.
SetShellVarContext all ; Set context to all users
StrCmp "$R1" "$DESKTOP" end ; All users desktop
StrCmp "$R1" "$STARTMENU" end ; All users start menu
SetShellVarContext current ; Set context to all users
StrCmp "$R1" "$DESKTOP" end ; Current user desktop
StrCmp "$R1" "$STARTMENU" end ; Current user start menu
StrCmp "$R1" "$QUICKLAUNCH" end ; Current user quick launch
IfFileExists "$R1" +1 +3 ; Only try to remove the dir if it exists
ClearErrors
RmDir "$R1" ; Remove the dir
IfErrors end ; If we fail there is no use trying to remove its parent dir
StrCmp "$R0" "\" loop end ; Only loop when the path is relative to the install dir
end:
ClearErrors
Push 0
FunctionEnd
!verbose pop
!endif
!macroend
!macro un.ParseUninstallLogCall
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call un.ParseUninstallLog
!verbose pop
!macroend
################################################################################
# Macros for custom branding
/**
* Sets BrandFullName and / or BrandShortName to values provided in the specified
* ini file and defaults to BrandShortName and BrandFullName as defined in
* branding.nsi when the associated ini file entry is not specified.
*
* ini file format:
* [Branding]
* BrandFullName=Custom Full Name
* BrandShortName=Custom Short Name
*
* @param _PATH_TO_INI
* Path to the ini file.
*
* $R6 = return value from ReadINIStr
* $R7 = stores BrandShortName
* $R8 = stores BrandFullName
* $R9 = _PATH_TO_INI
*/
!macro SetBrandNameVars
!ifndef ${_MOZFUNC_UN}SetBrandNameVars
!define _MOZFUNC_UN_TMP ${_MOZFUNC_UN}
!insertmacro ${_MOZFUNC_UN_TMP}WordReplace
!undef _MOZFUNC_UN
!define _MOZFUNC_UN ${_MOZFUNC_UN_TMP}
!undef _MOZFUNC_UN_TMP
; Prevent declaring vars twice when the SetBrandNameVars macro is
; inserted into both the installer and uninstaller.
!ifndef SetBrandNameVars
Var BrandFullName
Var BrandFullNameDA
Var BrandShortName
!endif
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}SetBrandNameVars "!insertmacro ${_MOZFUNC_UN}SetBrandNameVarsCall"
Function ${_MOZFUNC_UN}SetBrandNameVars
Exch $R9
Push $R8
Push $R7
Push $R6
StrCpy $R8 "${BrandFullName}"
StrCpy $R7 "${BrandShortName}"
IfFileExists "$R9" +1 finish
ClearErrors
ReadINIStr $R6 $R9 "Branding" "BrandFullName"
IfErrors +2 +1
StrCpy $R8 "$R6"
ClearErrors
ReadINIStr $R6 $R9 "Branding" "BrandShortName"
IfErrors +2 +1
StrCpy $R7 "$R6"
finish:
StrCpy $BrandFullName "$R8"
${${_MOZFUNC_UN}WordReplace} "$R8" "&" "&&" "+" $R8
StrCpy $BrandFullNameDA "$R8"
StrCpy $BrandShortName "$R7"
Pop $R6
Pop $R7
Pop $R8
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro SetBrandNameVarsCall _PATH_TO_INI
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_PATH_TO_INI}"
Call SetBrandNameVars
!verbose pop
!macroend
!macro un.SetBrandNameVarsCall _PATH_TO_INI
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_PATH_TO_INI}"
Call un.SetBrandNameVars
!verbose pop
!macroend
!macro un.SetBrandNameVars
!ifndef un.SetBrandNameVars
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro SetBrandNameVars
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
/**
* Replaces the wizard's header image with the one specified.
*
* @param _PATH_TO_IMAGE
* Fully qualified path to the bitmap to use for the header image.
*
* $R8 = hwnd for the control returned from GetDlgItem.
* $R9 = _PATH_TO_IMAGE
*/
!macro ChangeMUIHeaderImage
!ifndef ${_MOZFUNC_UN}ChangeMUIHeaderImage
Var hHeaderBitmap
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}ChangeMUIHeaderImage "!insertmacro ${_MOZFUNC_UN}ChangeMUIHeaderImageCall"
Function ${_MOZFUNC_UN}ChangeMUIHeaderImage
Exch $R9
Push $R8
GetDlgItem $R8 $HWNDPARENT 1046
System::Call 'user32::LoadImage(i 0, t "$R9", i 0, i 0, i 0, i 0x0010|0x2000) i.s'
Pop $hHeaderBitmap
SendMessage $R8 ${STM_SETIMAGE} 0 $hHeaderBitmap
; There is no way to specify a show function for a custom page so hide
; and then show the control to force the bitmap to redraw.
ShowWindow $R8 ${SW_HIDE}
ShowWindow $R8 ${SW_SHOW}
Pop $R8
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro ChangeMUIHeaderImageCall _PATH_TO_IMAGE
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_PATH_TO_IMAGE}"
Call ChangeMUIHeaderImage
!verbose pop
!macroend
!macro un.ChangeMUIHeaderImageCall _PATH_TO_IMAGE
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_PATH_TO_IMAGE}"
Call un.ChangeMUIHeaderImage
!verbose pop
!macroend
!macro un.ChangeMUIHeaderImage
!ifndef un.ChangeMUIHeaderImage
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro ChangeMUIHeaderImage
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
################################################################################
# User interface callback helper defines and macros
/* Install type defines */
!ifndef INSTALLTYPE_BASIC
!define INSTALLTYPE_BASIC 1
!endif
!ifndef INSTALLTYPE_ADVANCED
!define INSTALLTYPE_ADVANCED 2
!endif
!ifndef INSTALLTYPE_CUSTOM
!define INSTALLTYPE_CUSTOM 4
!endif
/**
* Checks whether to display the current page (e.g. if not performing a custom
* install don't display the custom pages).
*/
!macro CheckCustomCommon
!ifndef CheckCustomCommon
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define CheckCustomCommon "!insertmacro CheckCustomCommonCall"
Function CheckCustomCommon
; Abort if not a custom install
IntCmp $InstallType ${INSTALLTYPE_CUSTOM} +2 +1 +1
Abort
FunctionEnd
!verbose pop
!endif
!macroend
!macro CheckCustomCommonCall
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call CheckCustomCommon
!verbose pop
!macroend
/**
* Unloads dll's and releases references when the installer and uninstaller
* exit.
*/
!macro OnEndCommon
!ifndef ${_MOZFUNC_UN}OnEndCommon
!define _MOZFUNC_UN_TMP ${_MOZFUNC_UN}
!insertmacro ${_MOZFUNC_UN_TMP}UnloadUAC
!undef _MOZFUNC_UN
!define _MOZFUNC_UN ${_MOZFUNC_UN_TMP}
!undef _MOZFUNC_UN_TMP
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}OnEndCommon "!insertmacro ${_MOZFUNC_UN}OnEndCommonCall"
Function ${_MOZFUNC_UN}OnEndCommon
${${_MOZFUNC_UN}UnloadUAC}
StrCmp $hHeaderBitmap "" +3 +1
System::Call "gdi32::DeleteObject(i s)" $hHeaderBitmap
StrCpy $hHeaderBitmap ""
System::Free 0
FunctionEnd
!verbose pop
!endif
!macroend
!macro OnEndCommonCall
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call OnEndCommon
!verbose pop
!macroend
!macro un.OnEndCommonCall
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call un.OnEndCommon
!verbose pop
!macroend
!macro un.OnEndCommon
!ifndef un.OnEndCommon
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro OnEndCommon
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
/**
* Called from the installer's .onInit function not to be confused with the
* uninstaller's .onInit or the uninstaller's un.onInit functions.
*
* @param _WARN_UNSUPPORTED_MSG
* Message displayed when the Windows version is not supported.
*
* $R5 = return value from the GetSize macro
* $R6 = general string values, return value from GetTempFileName, return
* value from the GetSize macro
* $R7 = full path to the configuration ini file
* $R8 = return value from the GetParameters macro
* $R9 = _WARN_UNSUPPORTED_MSG
*/
!macro InstallOnInitCommon
!ifndef InstallOnInitCommon
!insertmacro CloseApp
!insertmacro ElevateUAC
!insertmacro GetOptions
!insertmacro GetParameters
!insertmacro GetSize
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define InstallOnInitCommon "!insertmacro InstallOnInitCommonCall"
Function InstallOnInitCommon
Exch $R9
Push $R8
Push $R7
Push $R6
Push $R5
!ifdef ___WINVER__NSH___
${Unless} ${AtLeastWin2000}
MessageBox MB_OK|MB_ICONSTOP "$R9" IDOK
; Nothing initialized so no need to call OnEndCommon
Quit
${EndUnless}
!endif
${GetParameters} $R8
; Require elevation if the user can elevate
${ElevateUAC}
${If} $R8 != ""
ClearErrors
${GetOptions} "$R8" "-ms" $R7
${If} ${Errors}
; Default install type
StrCpy $InstallType ${INSTALLTYPE_BASIC}
; Support for specifying an installation configuration file.
ClearErrors
${GetOptions} "$R8" "/INI=" $R7
${Unless} ${Errors}
; The configuration file must also exist
${If} ${FileExists} "$R7"
SetSilent silent
ReadINIStr $R8 $R7 "Install" "InstallDirectoryName"
${If} $R8 != ""
StrCpy $INSTDIR "$PROGRAMFILES\$R8"
${Else}
ReadINIStr $R8 $R7 "Install" "InstallDirectoryPath"
${If} $R8 != ""
StrCpy $INSTDIR "$R8"
${EndIf}
${EndIf}
${If} $INSTDIR == ""
; Check if there is an existing uninstall registry entry for this
; version of the application and if present install into that location
StrCpy $R6 "Software\Microsoft\Windows\CurrentVersion\Uninstall\${BrandFullNameInternal} (${AppVersion})"
ReadRegStr $R8 HKLM "$R6" "InstallLocation"
${If} $R8 == ""
StrCpy $INSTDIR "$PROGRAMFILES\${BrandFullName}"
${Else}
GetFullPathName $INSTDIR "$R8"
${Unless} ${FileExists} "$INSTDIR"
StrCpy $INSTDIR "$PROGRAMFILES\${BrandFullName}"
${EndUnless}
${EndIf}
${EndIf}
; Quit if we are unable to create the installation directory or we are
; unable to write to a file in the installation directory.
ClearErrors
${If} ${FileExists} "$INSTDIR"
GetTempFileName $R6 "$INSTDIR"
FileOpen $R5 $R6 w
FileWrite $R5 "Write Access Test"
FileClose $R5
Delete $R6
${If} ${Errors}
; Nothing initialized so no need to call OnEndCommon
Quit
${EndIf}
${Else}
CreateDirectory "$INSTDIR"
${If} ${Errors}
; Nothing initialized so no need to call OnEndCommon
Quit
${EndIf}
${EndIf}
ReadINIStr $R8 $R7 "Install" "CloseAppNoPrompt"
${If} $R8 == "true"
; Try to close the app if the exe is in use.
ClearErrors
${If} ${FileExists} "$INSTDIR\${FileMainEXE}"
${DeleteFile} "$INSTDIR\${FileMainEXE}"
${EndIf}
${If} ${Errors}
ClearErrors
${CloseApp} "false" ""
ClearErrors
${DeleteFile} "$INSTDIR\${FileMainEXE}"
; If unsuccessful try one more time and if it still fails Quit
${If} ${Errors}
ClearErrors
${CloseApp} "false" ""
ClearErrors
${DeleteFile} "$INSTDIR\${FileMainEXE}"
${If} ${Errors}
; Nothing initialized so no need to call OnEndCommon
Quit
${EndIf}
${EndIf}
${EndIf}
${EndIf}
ReadINIStr $R8 $R7 "Install" "QuickLaunchShortcut"
${If} $R8 == "false"
StrCpy $AddQuickLaunchSC "0"
${Else}
StrCpy $AddQuickLaunchSC "1"
${EndIf}
ReadINIStr $R8 $R7 "Install" "DesktopShortcut"
${If} $R8 == "false"
StrCpy $AddDesktopSC "0"
${Else}
StrCpy $AddDesktopSC "1"
${EndIf}
ReadINIStr $R8 $R7 "Install" "StartMenuShortcuts"
${If} $R8 == "false"
StrCpy $AddStartMenuSC "0"
${Else}
StrCpy $AddStartMenuSC "1"
${EndIf}
ReadINIStr $R8 $R7 "Install" "StartMenuDirectoryName"
${If} $R8 != ""
StrCpy $StartMenuDir "$R8"
${EndIf}
${EndIf}
${EndUnless}
${Else}
; Support for the deprecated -ms command line argument. The new command
; line arguments are not supported when -ms is used.
SetSilent silent
${EndIf}
${EndIf}
ClearErrors
Pop $R5
Pop $R6
Pop $R7
Pop $R8
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro InstallOnInitCommonCall _WARN_UNSUPPORTED_MSG
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push ${_WARN_UNSUPPORTED_MSG}
Call InstallOnInitCommon
!verbose pop
!macroend
/**
* Called from the uninstaller's .onInit function not to be confused with the
* installer's .onInit or the uninstaller's un.onInit functions.
*/
!macro UninstallOnInitCommon
!ifndef UninstallOnInitCommon
!insertmacro ElevateUAC
!insertmacro GetLongPath
!insertmacro GetOptions
!insertmacro GetParameters
!insertmacro UnloadUAC
!insertmacro UpdateUninstallLog
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define UninstallOnInitCommon "!insertmacro UninstallOnInitCommonCall"
Function UninstallOnInitCommon
; Prevent launching the application when a reboot is required and this
; executable is the main application executable
IfFileExists "$EXEDIR\${FileMainEXE}.moz-upgrade" +1 +4
MessageBox MB_YESNO "$(WARN_RESTART_REQUIRED_UPGRADE)" IDNO +2
Reboot
Quit ; Nothing initialized so no need to call OnEndCommon
GetFullPathName $INSTDIR "$EXEDIR\.."
${GetLongPath} "$INSTDIR" $INSTDIR
IfFileExists "$INSTDIR\${FileMainEXE}" +2 +1
Quit ; Nothing initialized so no need to call OnEndCommon
; Prevent all operations (e.g. set as default, postupdate, etc.) when a
; reboot is required and the executable launched is helper.exe
IfFileExists "$INSTDIR\${FileMainEXE}.moz-upgrade" +1 +4
MessageBox MB_YESNO "$(WARN_RESTART_REQUIRED_UPGRADE)" IDNO +2
Reboot
Quit ; Nothing initialized so no need to call OnEndCommon
${GetParameters} $R0
StrCmp "$R0" "" continue +1
; Require elevation if the user can elevate
ClearErrors
${GetOptions} "$R0" "/HideShortcuts" $R2
IfErrors showshortcuts +1
${ElevateUAC}
${HideShortcuts}
GoTo finish
; Require elevation if the user can elevate
showshortcuts:
ClearErrors
${GetOptions} "$R0" "/ShowShortcuts" $R2
IfErrors defaultappuser +1
${ElevateUAC}
${ShowShortcuts}
GoTo finish
; Require elevation if the the StartMenuInternet registry keys require
; updating and the user can elevate
defaultappuser:
ClearErrors
${GetOptions} "$R0" "/SetAsDefaultAppUser" $R2
IfErrors defaultappglobal +1
${SetAsDefaultAppUser}
GoTo finish
; Require elevation if the user can elevate
defaultappglobal:
ClearErrors
${GetOptions} "$R0" "/SetAsDefaultAppGlobal" $R2
IfErrors postupdate +1
${ElevateUAC}
${SetAsDefaultAppGlobal}
GoTo finish
; Do not attempt to elevate. The application launching this executable is
; responsible for elevation if it is required.
postupdate:
${WordReplace} "$R0" "$\"" "" "+" $R0
ClearErrors
${GetOptions} "$R0" "/PostUpdate" $R2
IfErrors continue +1
; If the uninstall.log does not exist don't perform post update
; operations. This prevents updating the registry for zip builds.
IfFileExists "$EXEDIR\uninstall.log" +1 finish
${PostUpdate}
ClearErrors
${GetOptions} "$R0" "/UninstallLog=" $R2
IfErrors updateuninstalllog +1
StrCmp "$R2" "" finish +1
GetFullPathName $R3 "$R2"
IfFileExists "$R3" +1 finish
Delete "$INSTDIR\uninstall\*wizard*"
Delete "$INSTDIR\uninstall\uninstall.log"
CopyFiles /SILENT /FILESONLY "$R3" "$INSTDIR\uninstall\"
${GetParent} "$R3" $R4
Delete "$R3"
RmDir "$R4"
GoTo finish
; Do not attempt to elevate. The application launching this executable is
; responsible for elevation if it is required.
updateuninstalllog:
${UpdateUninstallLog}
finish:
${UnloadUAC}
System::Call "shell32::SHChangeNotify(i, i, i, i) v (0x08000000, 0, 0, 0)"
Quit ; Nothing initialized so no need to call OnEndCommon
continue:
; If the uninstall.log does not exist don't perform uninstall
; operations. This prevents running the uninstaller for zip builds.
IfFileExists "$INSTDIR\uninstall\uninstall.log" +2 +1
Quit ; Nothing initialized so no need to call OnEndCommon
; Require elevation if the user can elevate
${ElevateUAC}
; If we made it this far then this installer is being used as an uninstaller.
WriteUninstaller "$EXEDIR\uninstaller.exe"
StrCpy $R1 "$\"$EXEDIR\uninstaller.exe$\""
StrCmp $R0 "/S" +1 +2
StrCpy $R1 "$\"$EXEDIR\uninstaller.exe$\" /S"
; When the uninstaller is launched it copies itself to the temp directory
; so it won't be in use so it can delete itself.
ExecWait $R1
${DeleteFile} "$EXEDIR\uninstaller.exe"
${UnloadUAC}
SetErrorLevel 0
Quit ; Nothing initialized so no need to call OnEndCommon
FunctionEnd
!verbose pop
!endif
!macroend
!macro UninstallOnInitCommonCall
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call UninstallOnInitCommon
!verbose pop
!macroend
/**
* Called from the MUI preDirectory function
*
* $R9 = returned value from GetSingleInstallPath, CheckDiskSpace, and
* CanWriteToInstallDir macros
*/
!macro PreDirectoryCommon
!ifndef PreDirectoryCommon
!insertmacro CanWriteToInstallDir
!insertmacro CheckDiskSpace
!insertmacro GetLongPath
!ifndef NO_INSTDIR_FROM_REG
!insertmacro GetSingleInstallPath
!endif
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define PreDirectoryCommon "!insertmacro PreDirectoryCommonCall"
Function PreDirectoryCommon
Push $R9
!ifndef NO_INSTDIR_FROM_REG
SetShellVarContext all ; Set SHCTX to HKLM
${GetSingleInstallPath} "Software\Mozilla\${BrandFullNameInternal}" $R9
StrCmp "$R9" "false" +1 fix_install_dir
SetShellVarContext current ; Set SHCTX to HKCU
${GetSingleInstallPath} "Software\Mozilla\${BrandFullNameInternal}" $R9
fix_install_dir:
StrCmp "$R9" "false" +2 +1
StrCpy $INSTDIR "$R9"
!endif
IfFileExists "$INSTDIR" +1 check_install_dir
; Always display the long path if the path already exists.
${GetLongPath} "$INSTDIR" $INSTDIR
; The call to GetLongPath returns a long path without a trailing
; back-slash. Append a \ to the path to prevent the directory
; name from being appended when using the NSIS create new folder.
; http://www.nullsoft.com/free/nsis/makensis.htm#InstallDir
StrCpy $INSTDIR "$INSTDIR\"
check_install_dir:
IntCmp $InstallType ${INSTALLTYPE_CUSTOM} end +1 +1
${CheckDiskSpace} $R9
StrCmp $R9 "false" end +1
${CanWriteToInstallDir} $R9
StrCmp $R9 "false" end +1
Abort
end:
Pop $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro PreDirectoryCommonCall
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call PreDirectoryCommon
!verbose pop
!macroend
/**
* Called from the MUI leaveDirectory function
*
* @param _WARN_DISK_SPACE
* Message displayed when there isn't enough disk space to perform the
* installation.
* @param _WARN_WRITE_ACCESS
* Message displayed when the installer does not have write access to
* $INSTDIR.
*
* $R7 = returned value from CheckDiskSpace and CanWriteToInstallDir macros
* $R8 = _WARN_DISK_SPACE
* $R9 = _WARN_WRITE_ACCESS
*/
!macro LeaveDirectoryCommon
!ifndef LeaveDirectoryCommon
!insertmacro CheckDiskSpace
!insertmacro CanWriteToInstallDir
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define LeaveDirectoryCommon "!insertmacro LeaveDirectoryCommonCall"
Function LeaveDirectoryCommon
Exch $R9
Exch 1
Exch $R8
Push $R7
${CheckDiskSpace} $R7
StrCmp $R7 "false" +1 +3
MessageBox MB_OK "$R8"
Abort
${CanWriteToInstallDir} $R7
StrCmp $R7 "false" +1 +3
MessageBox MB_OK "$R9"
Abort
Pop $R7
Exch $R8
Exch 1
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro LeaveDirectoryCommonCall _WARN_DISK_SPACE _WARN_WRITE_ACCESS
!verbose push
Push "${_WARN_DISK_SPACE}"
Push "${_WARN_WRITE_ACCESS}"
!verbose ${_MOZFUNC_VERBOSE}
Call LeaveDirectoryCommon
!verbose pop
!macroend
################################################################################
# Install Section common macros.
/**
* Performs common cleanup operations prior to the actual installation.
* This macro should be called first when installation starts.
*/
!macro InstallStartCleanupCommon
!ifndef InstallStartCleanupCommon
!insertmacro CleanVirtualStore
!insertmacro EndUninstallLog
!insertmacro ParseRemovedFilesLog
!insertmacro UpdateFromPreviousLog
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define InstallStartCleanupCommon "!insertmacro InstallStartCleanupCommonCall"
Function InstallStartCleanupCommon
; Remove files not removed by parsing the removed-files.log
Delete "$INSTDIR\install_wizard.log"
Delete "$INSTDIR\install_status.log"
RmDir /r "$INSTDIR\updates"
Delete "$INSTDIR\updates.xml"
Delete "$INSTDIR\active-update.xml"
RmDir /r "$INSTDIR\distribution"
; Remove files from the uninstall directory.
IfFileExists "$INSTDIR\uninstall" +1 +7
Delete "$INSTDIR\uninstall\*wizard*"
Delete "$INSTDIR\uninstall\uninstall.ini"
Delete "$INSTDIR\uninstall\cleanup.log"
Delete "$INSTDIR\uninstall\uninstall.update"
IfFileExists "$INSTDIR\uninstall\uninstall.log" +1 +2
Rename "$INSTDIR\uninstall\uninstall.log" "$INSTDIR\uninstall\uninstall.bak"
; Since we write to the uninstall.log in this directory during the
; installation create the directory if it doesn't already exist.
IfFileExists "$INSTDIR\uninstall" +2 +1
CreateDirectory "$INSTDIR\uninstall"
; Remove files that may be left behind by the application in the
; VirtualStore directory.
${CleanVirtualStore}
; Remove the files and directories in the removed-files.log
${ParseRemovedFilesLog}
FunctionEnd
!verbose pop
!endif
!macroend
!macro InstallStartCleanupCommonCall
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call InstallStartCleanupCommon
!verbose pop
!macroend
/**
* Performs common cleanup operations after the actual installation.
* This macro should be called last during the installation.
*/
!macro InstallEndCleanupCommon
!ifndef InstallEndCleanupCommon
!insertmacro EndUninstallLog
!insertmacro UpdateFromPreviousLog
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define InstallEndCleanupCommon "!insertmacro InstallEndCleanupCommonCall"
Function InstallEndCleanupCommon
; Close the file handle to the uninstall.log
${EndUninstallLog}
${UpdateFromPreviousLog}
FunctionEnd
!verbose pop
!endif
!macroend
!macro InstallEndCleanupCommonCall
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call InstallEndCleanupCommon
!verbose pop
!macroend
################################################################################
# UAC Related Macros
/**
* Provides UAC elevation support for Vista and above (requires the UAC plugin).
*
* $0 = return values from calls to the UAC plugin (always uses $0)
* $R9 = return values from GetParameters and GetOptions macros
*/
!macro ElevateUAC
!ifndef ${_MOZFUNC_UN}ElevateUAC
!ifdef USE_UAC_PLUGIN
!ifdef ___WINVER__NSH___
!define _MOZFUNC_UN_TMP ${_MOZFUNC_UN}
!insertmacro ${_MOZFUNC_UN_TMP}GetOptions
!insertmacro ${_MOZFUNC_UN_TMP}GetParameters
!undef _MOZFUNC_UN
!define _MOZFUNC_UN ${_MOZFUNC_UN_TMP}
!undef _MOZFUNC_UN_TMP
!endif
!endif
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}ElevateUAC "!insertmacro ${_MOZFUNC_UN}ElevateUACCall"
Function ${_MOZFUNC_UN}ElevateUAC
; USE_UAC_PLUGIN is temporary until Thunderbird has been updated to use the UAC plugin
!ifdef USE_UAC_PLUGIN
!ifdef ___WINVER__NSH___
Push $R9
Push $0
${If} ${AtLeastWinVista}
UAC::IsAdmin
; If the user is not an admin already
${If} "$0" != "1"
UAC::SupportsUAC
; If the system supports UAC
${If} "$0" == "1"
UAC::GetElevationType
; If the user account has a split token
${If} "$0" == "3"
UAC::RunElevated
UAC::Unload
; Nothing besides UAC initialized so no need to call OnEndCommon
Quit
${EndIf}
${EndIf}
${Else}
${GetParameters} $R9
${If} $R9 != ""
ClearErrors
${GetOptions} "$R9" "/UAC:" $0
; If the command line contains /UAC then we need to initialize
; the UAC plugin to use UAC::ExecCodeSegment to execute code in
; the non-elevated context.
${Unless} ${Errors}
UAC::RunElevated
${EndUnless}
${EndIf}
${EndIf}
${EndIf}
Pop $0
Pop $R9
!endif
!endif
FunctionEnd
!verbose pop
!endif
!macroend
!macro ElevateUACCall
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call ElevateUAC
!verbose pop
!macroend
!macro un.ElevateUACCall
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call un.ElevateUAC
!verbose pop
!macroend
!macro un.ElevateUAC
!ifndef un.ElevateUAC
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro ElevateUAC
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
/**
* Unloads the UAC plugin so the NSIS plugins can be removed when the installer
* and uninstaller exit.
*
* $R9 = return values from GetParameters and GetOptions macros
*/
!macro UnloadUAC
!ifndef ${_MOZFUNC_UN}UnloadUAC
!ifdef USE_UAC_PLUGIN
!ifdef ___WINVER__NSH___
!define _MOZFUNC_UN_TMP_UnloadUAC ${_MOZFUNC_UN}
!insertmacro ${_MOZFUNC_UN_TMP_UnloadUAC}GetOptions
!insertmacro ${_MOZFUNC_UN_TMP_UnloadUAC}GetParameters
!undef _MOZFUNC_UN
!define _MOZFUNC_UN ${_MOZFUNC_UN_TMP_UnloadUAC}
!undef _MOZFUNC_UN_TMP_UnloadUAC
!endif
!endif
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define ${_MOZFUNC_UN}UnloadUAC "!insertmacro ${_MOZFUNC_UN}UnloadUACCall"
Function ${_MOZFUNC_UN}UnloadUAC
!ifdef USE_UAC_PLUGIN
!ifdef ___WINVER__NSH___
Push $R9
${Unless} ${AtLeastWinVista}
Return
${EndUnless}
ClearErrors
${${_MOZFUNC_UN}GetParameters} $R9
${${_MOZFUNC_UN}GetOptions} "$R9" "/UAC:" $R9
; If the command line contains /UAC then we need to unload the UAC plugin
IfErrors +2 +1
UAC::Unload
ClearErrors
Pop $R9
!endif
!endif
FunctionEnd
!verbose pop
!endif
!macroend
!macro UnloadUACCall
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call UnloadUAC
!verbose pop
!macroend
!macro un.UnloadUACCall
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call un.UnloadUAC
!verbose pop
!macroend
!macro un.UnloadUAC
!ifndef un.UnloadUAC
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!undef _MOZFUNC_UN
!define _MOZFUNC_UN "un."
!insertmacro UnloadUAC
!undef _MOZFUNC_UN
!define _MOZFUNC_UN
!verbose pop
!endif
!macroend
################################################################################
# Macros for logging
#
# Since these are used by other macros they should be inserted first. All of
# these macros can be easily inserted using the _LoggingCommon macro.
/**
* Adds all logging macros in the correct order in one fell swoop as well as
* the vars for the install.log and uninstall.log file handles.
*/
!macro _LoggingCommon
Var /GLOBAL fhInstallLog
Var /GLOBAL fhUninstallLog
!insertmacro StartInstallLog
!insertmacro EndInstallLog
!insertmacro StartUninstallLog
!insertmacro EndUninstallLog
!macroend
!define _LoggingCommon "!insertmacro _LoggingCommon"
/**
* Creates a file named install.log in the install directory (e.g. $INSTDIR)
* and adds the installation started message to the install.log for this
* installation. This also adds the fhInstallLog and fhUninstallLog vars used
* for logging.
*
* $fhInstallLog = filehandle for $INSTDIR\install.log
*
* @param _APP_NAME
* Typically the BrandFullName
* @param _AB_CD
* The locale identifier
* @param _APP_VERSION
* The application version
* @param _GRE_VERSION
* The Gecko Runtime Engine version
*
* $R6 = _APP_NAME
* $R7 = _AB_CD
* $R8 = _APP_VERSION
* $R9 = _GRE_VERSION
*/
!macro StartInstallLog
!ifndef StartInstallLog
!insertmacro GetTime
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define StartInstallLog "!insertmacro StartInstallLogCall"
Function StartInstallLog
Exch $R9
Exch 1
Exch $R8
Exch 2
Exch $R7
Exch 3
Exch $R6
Push $R5
Push $R4
Push $R3
Push $R2
Push $R1
Push $R0
Push $9
FileOpen $fhInstallLog "$INSTDIR\install.log" w
${GetTime} "" "L" $9 $R0 $R1 $R2 $R3 $R4 $R5
FileWrite $fhInstallLog "$R6 Installation Started: $R1-$R0-$9 $R3:$R4:$R5"
${WriteLogSeparator}
${LogHeader} "Installation Details"
${LogMsg} "Install Dir: $INSTDIR"
${LogMsg} "Locale : $R7"
${LogMsg} "App Version: $R8"
${LogMsg} "GRE Version: $R9"
Pop $9
Pop $R0
Pop $R1
Pop $R2
Pop $R3
Pop $R4
Pop $R5
Exch $R6
Exch 3
Exch $R7
Exch 2
Exch $R8
Exch 1
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro StartInstallLogCall _APP_NAME _AB_CD _APP_VERSION _GRE_VERSION
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_APP_NAME}"
Push "${_AB_CD}"
Push "${_APP_VERSION}"
Push "${_GRE_VERSION}"
Call StartInstallLog
!verbose pop
!macroend
/**
* Writes the installation finished message to the install.log and closes the
* file handles to the install.log and uninstall.log
*
* @param _APP_NAME
*
* $R9 = _APP_NAME
*/
!macro EndInstallLog
!ifndef EndInstallLog
!insertmacro GetTime
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define EndInstallLog "!insertmacro EndInstallLogCall"
Function EndInstallLog
Exch $R9
Push $R8
Push $R7
Push $R6
Push $R5
Push $R4
Push $R3
Push $R2
${WriteLogSeparator}
${GetTime} "" "L" $R2 $R3 $R4 $R5 $R6 $R7 $R8
FileWrite $fhInstallLog "$R9 Installation Finished: $R4-$R3-$R2 $R6:$R7:$R8$\r$\n"
FileClose $fhInstallLog
Pop $R2
Pop $R3
Pop $R4
Pop $R5
Pop $R6
Pop $R7
Pop $R8
Exch $R9
FunctionEnd
!verbose pop
!endif
!macroend
!macro EndInstallLogCall _APP_NAME
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Push "${_APP_NAME}"
Call EndInstallLog
!verbose pop
!macroend
/**
* Opens the file handle to the uninstall.log.
*
* $fhUninstallLog = filehandle for $INSTDIR\uninstall\uninstall.log
*/
!macro StartUninstallLog
!ifndef StartUninstallLog
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define StartUninstallLog "!insertmacro StartUninstallLogCall"
Function StartUninstallLog
FileOpen $fhUninstallLog "$INSTDIR\uninstall\uninstall.log" w
FunctionEnd
!verbose pop
!endif
!macroend
!macro StartUninstallLogCall
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call StartUninstallLog
!verbose pop
!macroend
/**
* Closes the file handle to the uninstall.log.
*/
!macro EndUninstallLog
!ifndef EndUninstallLog
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
!define EndUninstallLog "!insertmacro EndUninstallLogCall"
Function EndUninstallLog
FileClose $fhUninstallLog
FunctionEnd
!verbose pop
!endif
!macroend
!macro EndUninstallLogCall
!verbose push
!verbose ${_MOZFUNC_VERBOSE}
Call EndUninstallLog
!verbose pop
!macroend
/**
* Adds a section header to the human readable log.
*
* @param _HEADER
* The header text to write to the log.
*/
!macro LogHeader _HEADER
${WriteLogSeparator}
FileWrite $fhInstallLog "${_HEADER}"
${WriteLogSeparator}
!macroend
!define LogHeader "!insertmacro LogHeader"
/**
* Adds a section message to the human readable log.
*
* @param _MSG
* The message text to write to the log.
*/
!macro LogMsg _MSG
FileWrite $fhInstallLog " ${_MSG}$\r$\n"
!macroend
!define LogMsg "!insertmacro LogMsg"
/**
* Adds an uninstall entry to the uninstall log.
*
* @param _MSG
* The message text to write to the log.
*/
!macro LogUninstall _MSG
FileWrite $fhUninstallLog "${_MSG}$\r$\n"
!macroend
!define LogUninstall "!insertmacro LogUninstall"
/**
* Adds a section divider to the human readable log.
*/
!macro WriteLogSeparator
FileWrite $fhInstallLog "$\r$\n----------------------------------------\
---------------------------------------$\r$\n"
!macroend
!define WriteLogSeparator "!insertmacro WriteLogSeparator"
Reference in New Issue View Git Blame Copy Permalink