gecko/xpcom/tests/gtest/TestPipes.cpp

948 lines
28 KiB
C++

/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set ts=8 sts=2 et sw=2 tw=80: */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */
#include <algorithm>
#include "gtest/gtest.h"
#include "Helpers.h"
#include "mozilla/ReentrantMonitor.h"
#include "nsCOMPtr.h"
#include "nsCRT.h"
#include "nsIAsyncInputStream.h"
#include "nsIAsyncOutputStream.h"
#include "nsICloneableInputStream.h"
#include "nsIInputStream.h"
#include "nsIOutputStream.h"
#include "nsIPipe.h"
#include "nsIThread.h"
#include "nsIRunnable.h"
#include "nsStreamUtils.h"
#include "nsString.h"
#include "nsThreadUtils.h"
#include "prprf.h"
#include "prinrval.h"
using namespace mozilla;
#define ITERATIONS 33333
char kTestPattern[] = "My hovercraft is full of eels.\n";
bool gTrace = false;
static nsresult
WriteAll(nsIOutputStream *os, const char *buf, uint32_t bufLen, uint32_t *lenWritten)
{
const char *p = buf;
*lenWritten = 0;
while (bufLen) {
uint32_t n;
nsresult rv = os->Write(p, bufLen, &n);
if (NS_FAILED(rv)) return rv;
p += n;
bufLen -= n;
*lenWritten += n;
}
return NS_OK;
}
class nsReceiver final : public nsIRunnable {
public:
NS_DECL_THREADSAFE_ISUPPORTS
NS_IMETHOD Run() override {
nsresult rv;
char buf[101];
uint32_t count;
PRIntervalTime start = PR_IntervalNow();
while (true) {
rv = mIn->Read(buf, 100, &count);
if (NS_FAILED(rv)) {
printf("read failed\n");
break;
}
if (count == 0) {
// printf("EOF count = %d\n", mCount);
break;
}
if (gTrace) {
buf[count] = '\0';
printf("read: %s\n", buf);
}
mCount += count;
}
PRIntervalTime end = PR_IntervalNow();
printf("read %d bytes, time = %dms\n", mCount,
PR_IntervalToMilliseconds(end - start));
return rv;
}
explicit nsReceiver(nsIInputStream* in) : mIn(in), mCount(0) {
}
uint32_t GetBytesRead() { return mCount; }
private:
~nsReceiver() {}
protected:
nsCOMPtr<nsIInputStream> mIn;
uint32_t mCount;
};
NS_IMPL_ISUPPORTS(nsReceiver, nsIRunnable)
nsresult
TestPipe(nsIInputStream* in, nsIOutputStream* out)
{
nsRefPtr<nsReceiver> receiver = new nsReceiver(in);
if (!receiver)
return NS_ERROR_OUT_OF_MEMORY;
nsresult rv;
nsCOMPtr<nsIThread> thread;
rv = NS_NewThread(getter_AddRefs(thread), receiver);
if (NS_FAILED(rv)) return rv;
uint32_t total = 0;
PRIntervalTime start = PR_IntervalNow();
for (uint32_t i = 0; i < ITERATIONS; i++) {
uint32_t writeCount;
char *buf = PR_smprintf("%d %s", i, kTestPattern);
uint32_t len = strlen(buf);
rv = WriteAll(out, buf, len, &writeCount);
if (gTrace) {
printf("wrote: ");
for (uint32_t j = 0; j < writeCount; j++) {
putc(buf[j], stdout);
}
printf("\n");
}
PR_smprintf_free(buf);
if (NS_FAILED(rv)) return rv;
total += writeCount;
}
rv = out->Close();
if (NS_FAILED(rv)) return rv;
PRIntervalTime end = PR_IntervalNow();
thread->Shutdown();
printf("wrote %d bytes, time = %dms\n", total,
PR_IntervalToMilliseconds(end - start));
EXPECT_EQ(receiver->GetBytesRead(), total);
return NS_OK;
}
////////////////////////////////////////////////////////////////////////////////
class nsShortReader final : public nsIRunnable {
public:
NS_DECL_THREADSAFE_ISUPPORTS
NS_IMETHOD Run() override {
nsresult rv;
char buf[101];
uint32_t count;
uint32_t total = 0;
while (true) {
//if (gTrace)
// printf("calling Read\n");
rv = mIn->Read(buf, 100, &count);
if (NS_FAILED(rv)) {
printf("read failed\n");
break;
}
if (count == 0) {
break;
}
if (gTrace) {
// For next |printf()| call and possible others elsewhere.
buf[count] = '\0';
printf("read %d bytes: %s\n", count, buf);
}
Received(count);
total += count;
}
printf("read %d bytes\n", total);
return rv;
}
explicit nsShortReader(nsIInputStream* in) : mIn(in), mReceived(0) {
mMon = new ReentrantMonitor("nsShortReader");
}
void Received(uint32_t count) {
ReentrantMonitorAutoEnter mon(*mMon);
mReceived += count;
mon.Notify();
}
uint32_t WaitForReceipt(const uint32_t aWriteCount) {
ReentrantMonitorAutoEnter mon(*mMon);
uint32_t result = mReceived;
while (result < aWriteCount) {
mon.Wait();
EXPECT_TRUE(mReceived > result);
result = mReceived;
}
mReceived = 0;
return result;
}
private:
~nsShortReader() {}
protected:
nsCOMPtr<nsIInputStream> mIn;
uint32_t mReceived;
ReentrantMonitor* mMon;
};
NS_IMPL_ISUPPORTS(nsShortReader, nsIRunnable)
nsresult
TestShortWrites(nsIInputStream* in, nsIOutputStream* out)
{
nsRefPtr<nsShortReader> receiver = new nsShortReader(in);
if (!receiver)
return NS_ERROR_OUT_OF_MEMORY;
nsresult rv;
nsCOMPtr<nsIThread> thread;
rv = NS_NewThread(getter_AddRefs(thread), receiver);
if (NS_FAILED(rv)) return rv;
uint32_t total = 0;
for (uint32_t i = 0; i < ITERATIONS; i++) {
uint32_t writeCount;
char* buf = PR_smprintf("%d %s", i, kTestPattern);
uint32_t len = strlen(buf);
len = len * rand() / RAND_MAX;
len = std::min(1u, len);
rv = WriteAll(out, buf, len, &writeCount);
if (NS_FAILED(rv)) return rv;
EXPECT_EQ(writeCount, len);
total += writeCount;
if (gTrace)
printf("wrote %d bytes: %s\n", writeCount, buf);
PR_smprintf_free(buf);
//printf("calling Flush\n");
out->Flush();
//printf("calling WaitForReceipt\n");
#ifdef DEBUG
const uint32_t received =
receiver->WaitForReceipt(writeCount);
EXPECT_EQ(received, writeCount);
#endif
}
rv = out->Close();
if (NS_FAILED(rv)) return rv;
thread->Shutdown();
printf("wrote %d bytes\n", total);
return NS_OK;
}
////////////////////////////////////////////////////////////////////////////////
class nsPump final : public nsIRunnable
{
public:
NS_DECL_THREADSAFE_ISUPPORTS
NS_IMETHOD Run() override {
nsresult rv;
uint32_t count;
while (true) {
rv = mOut->WriteFrom(mIn, ~0U, &count);
if (NS_FAILED(rv)) {
printf("Write failed\n");
break;
}
if (count == 0) {
printf("EOF count = %d\n", mCount);
break;
}
if (gTrace) {
printf("Wrote: %d\n", count);
}
mCount += count;
}
mOut->Close();
return rv;
}
nsPump(nsIInputStream* in,
nsIOutputStream* out)
: mIn(in), mOut(out), mCount(0) {
}
private:
~nsPump() {}
protected:
nsCOMPtr<nsIInputStream> mIn;
nsCOMPtr<nsIOutputStream> mOut;
uint32_t mCount;
};
NS_IMPL_ISUPPORTS(nsPump, nsIRunnable)
TEST(Pipes, ChainedPipes)
{
nsresult rv;
if (gTrace) {
printf("TestChainedPipes\n");
}
nsCOMPtr<nsIInputStream> in1;
nsCOMPtr<nsIOutputStream> out1;
rv = NS_NewPipe(getter_AddRefs(in1), getter_AddRefs(out1), 20, 1999);
if (NS_FAILED(rv)) return;
nsCOMPtr<nsIInputStream> in2;
nsCOMPtr<nsIOutputStream> out2;
rv = NS_NewPipe(getter_AddRefs(in2), getter_AddRefs(out2), 200, 401);
if (NS_FAILED(rv)) return;
nsRefPtr<nsPump> pump = new nsPump(in1, out2);
if (pump == nullptr) return;
nsCOMPtr<nsIThread> thread;
rv = NS_NewThread(getter_AddRefs(thread), pump);
if (NS_FAILED(rv)) return;
nsRefPtr<nsReceiver> receiver = new nsReceiver(in2);
if (receiver == nullptr) return;
nsCOMPtr<nsIThread> receiverThread;
rv = NS_NewThread(getter_AddRefs(receiverThread), receiver);
if (NS_FAILED(rv)) return;
uint32_t total = 0;
for (uint32_t i = 0; i < ITERATIONS; i++) {
uint32_t writeCount;
char* buf = PR_smprintf("%d %s", i, kTestPattern);
uint32_t len = strlen(buf);
len = len * rand() / RAND_MAX;
len = std::max(1u, len);
rv = WriteAll(out1, buf, len, &writeCount);
if (NS_FAILED(rv)) return;
EXPECT_EQ(writeCount, len);
total += writeCount;
if (gTrace)
printf("wrote %d bytes: %s\n", writeCount, buf);
PR_smprintf_free(buf);
}
if (gTrace) {
printf("wrote total of %d bytes\n", total);
}
rv = out1->Close();
if (NS_FAILED(rv)) return;
thread->Shutdown();
receiverThread->Shutdown();
}
////////////////////////////////////////////////////////////////////////////////
void
RunTests(uint32_t segSize, uint32_t segCount)
{
nsresult rv;
nsCOMPtr<nsIInputStream> in;
nsCOMPtr<nsIOutputStream> out;
uint32_t bufSize = segSize * segCount;
if (gTrace) {
printf("Testing New Pipes: segment size %d buffer size %d\n", segSize, bufSize);
printf("Testing long writes...\n");
}
rv = NS_NewPipe(getter_AddRefs(in), getter_AddRefs(out), segSize, bufSize);
EXPECT_TRUE(NS_SUCCEEDED(rv));
rv = TestPipe(in, out);
EXPECT_TRUE(NS_SUCCEEDED(rv));
if (gTrace) {
printf("Testing short writes...\n");
}
rv = NS_NewPipe(getter_AddRefs(in), getter_AddRefs(out), segSize, bufSize);
EXPECT_TRUE(NS_SUCCEEDED(rv));
rv = TestShortWrites(in, out);
EXPECT_TRUE(NS_SUCCEEDED(rv));
}
TEST(Pipes, Main)
{
RunTests(16, 1);
RunTests(4096, 16);
}
////////////////////////////////////////////////////////////////////////////////
namespace {
static const uint32_t DEFAULT_SEGMENT_SIZE = 4 * 1024;
// An alternate pipe testing routing that uses NS_ConsumeStream() instead of
// manual read loop.
static void TestPipe2(uint32_t aNumBytes,
uint32_t aSegmentSize = DEFAULT_SEGMENT_SIZE)
{
nsCOMPtr<nsIInputStream> reader;
nsCOMPtr<nsIOutputStream> writer;
uint32_t maxSize = std::max(aNumBytes, aSegmentSize);
nsresult rv = NS_NewPipe(getter_AddRefs(reader), getter_AddRefs(writer),
aSegmentSize, maxSize);
ASSERT_TRUE(NS_SUCCEEDED(rv));
nsTArray<char> inputData;
testing::CreateData(aNumBytes, inputData);
testing::WriteAllAndClose(writer, inputData);
testing::ConsumeAndValidateStream(reader, inputData);
}
} // namespace
TEST(Pipes, Blocking_32k)
{
TestPipe2(32 * 1024);
}
TEST(Pipes, Blocking_64k)
{
TestPipe2(64 * 1024);
}
TEST(Pipes, Blocking_128k)
{
TestPipe2(128 * 1024);
}
////////////////////////////////////////////////////////////////////////////////
namespace {
// Utility routine to validate pipe clone before. There are many knobs.
//
// aTotalBytes Total number of bytes to write to the pipe.
// aNumWrites How many separate write calls should be made. Bytes
// are evenly distributed over these write calls.
// aNumInitialClones How many clones of the pipe input stream should be
// made before writing begins.
// aNumToCloseAfterWrite How many streams should be closed after each write.
// One stream is always kept open. This verifies that
// closing one stream does not effect other open
// streams.
// aNumToCloneAfterWrite How many clones to create after each write. Occurs
// after closing any streams. This tests cloning
// active streams on a pipe that is being written to.
// aNumStreamToReadPerWrite How many streams to read fully after each write.
// This tests reading cloned streams at different rates
// while the pipe is being written to.
static void TestPipeClone(uint32_t aTotalBytes,
uint32_t aNumWrites,
uint32_t aNumInitialClones,
uint32_t aNumToCloseAfterWrite,
uint32_t aNumToCloneAfterWrite,
uint32_t aNumStreamsToReadPerWrite,
uint32_t aSegmentSize = DEFAULT_SEGMENT_SIZE)
{
nsCOMPtr<nsIInputStream> reader;
nsCOMPtr<nsIOutputStream> writer;
uint32_t maxSize = std::max(aTotalBytes, aSegmentSize);
// Use async input streams so we can NS_ConsumeStream() the current data
// while the pipe is still being written to.
nsresult rv = NS_NewPipe(getter_AddRefs(reader), getter_AddRefs(writer),
aSegmentSize, maxSize,
true, false); // non-blocking - reader, writer
ASSERT_TRUE(NS_SUCCEEDED(rv));
nsCOMPtr<nsICloneableInputStream> cloneable = do_QueryInterface(reader);
ASSERT_TRUE(cloneable);
ASSERT_TRUE(cloneable->GetCloneable());
nsTArray<nsCString> outputDataList;
nsTArray<nsCOMPtr<nsIInputStream>> streamList;
// first stream is our original reader from the pipe
streamList.AppendElement(reader);
outputDataList.AppendElement();
// Clone the initial input stream the specified number of times
// before performing any writes.
for (uint32_t i = 0; i < aNumInitialClones; ++i) {
nsCOMPtr<nsIInputStream>* clone = streamList.AppendElement();
rv = cloneable->Clone(getter_AddRefs(*clone));
ASSERT_TRUE(NS_SUCCEEDED(rv));
ASSERT_TRUE(*clone);
outputDataList.AppendElement();
}
nsTArray<char> inputData;
testing::CreateData(aTotalBytes, inputData);
const uint32_t bytesPerWrite = ((aTotalBytes - 1)/ aNumWrites) + 1;
uint32_t offset = 0;
uint32_t remaining = aTotalBytes;
uint32_t nextStreamToRead = 0;
while (remaining) {
uint32_t numToWrite = std::min(bytesPerWrite, remaining);
testing::Write(writer, inputData, offset, numToWrite);
offset += numToWrite;
remaining -= numToWrite;
// Close the specified number of streams. This allows us to
// test that one closed clone does not break other open clones.
for (uint32_t i = 0; i < aNumToCloseAfterWrite &&
streamList.Length() > 1; ++i) {
uint32_t lastIndex = streamList.Length() - 1;
streamList[lastIndex]->Close();
streamList.RemoveElementAt(lastIndex);
outputDataList.RemoveElementAt(lastIndex);
if (nextStreamToRead >= streamList.Length()) {
nextStreamToRead = 0;
}
}
// Create the specified number of clones. This lets us verify
// that we can create clones in the middle of pipe reading and
// writing.
for (uint32_t i = 0; i < aNumToCloneAfterWrite; ++i) {
nsCOMPtr<nsIInputStream>* clone = streamList.AppendElement();
rv = cloneable->Clone(getter_AddRefs(*clone));
ASSERT_TRUE(NS_SUCCEEDED(rv));
ASSERT_TRUE(*clone);
// Initialize the new output data to make whats been read to data for
// the original stream. First stream is always the original stream.
nsCString* outputData = outputDataList.AppendElement();
*outputData = outputDataList[0];
}
// Read the specified number of streams. This lets us verify that we
// can read from the clones at different rates while the pipe is being
// written to.
for (uint32_t i = 0; i < aNumStreamsToReadPerWrite; ++i) {
nsCOMPtr<nsIInputStream>& stream = streamList[nextStreamToRead];
nsCString& outputData = outputDataList[nextStreamToRead];
// Can't use ConsumeAndValidateStream() here because we're not
// guaranteed the exact amount read. It should just be at least
// as many as numToWrite.
nsAutoCString tmpOutputData;
rv = NS_ConsumeStream(stream, UINT32_MAX, tmpOutputData);
ASSERT_TRUE(rv == NS_BASE_STREAM_WOULD_BLOCK || NS_SUCCEEDED(rv));
ASSERT_GE(tmpOutputData.Length(), numToWrite);
outputData += tmpOutputData;
nextStreamToRead += 1;
if (nextStreamToRead >= streamList.Length()) {
// Note: When we wrap around on the streams being read, its possible
// we will trigger a segment to be deleted from the pipe. It
// would be nice to validate this here, but we don't have any
// QI'able interface that would let us check easily.
nextStreamToRead = 0;
}
}
}
rv = writer->Close();
ASSERT_TRUE(NS_SUCCEEDED(rv));
nsDependentCSubstring inputString(inputData.Elements(), inputData.Length());
// Finally, read the remaining bytes from each stream. This may be
// different amounts of data depending on how much reading we did while
// writing. Verify that the end result matches the input data.
for (uint32_t i = 0; i < streamList.Length(); ++i) {
nsCOMPtr<nsIInputStream>& stream = streamList[i];
nsCString& outputData = outputDataList[i];
nsAutoCString tmpOutputData;
rv = NS_ConsumeStream(stream, UINT32_MAX, tmpOutputData);
ASSERT_TRUE(rv == NS_BASE_STREAM_WOULD_BLOCK || NS_SUCCEEDED(rv));
stream->Close();
// Append to total amount read from the stream
outputData += tmpOutputData;
ASSERT_EQ(inputString.Length(), outputData.Length());
ASSERT_TRUE(inputString.Equals(outputData));
}
}
} // namespace
TEST(Pipes, Clone_BeforeWrite_ReadAtEnd)
{
TestPipeClone(32 * 1024, // total bytes
16, // num writes
3, // num initial clones
0, // num streams to close after each write
0, // num clones to add after each write
0); // num streams to read after each write
}
TEST(Pipes, Clone_BeforeWrite_ReadDuringWrite)
{
// Since this reads all streams on every write, it should trigger the
// pipe cursor roll back optimization. Currently we can only verify
// this with logging.
TestPipeClone(32 * 1024, // total bytes
16, // num writes
3, // num initial clones
0, // num streams to close after each write
0, // num clones to add after each write
4); // num streams to read after each write
}
TEST(Pipes, Clone_DuringWrite_ReadAtEnd)
{
TestPipeClone(32 * 1024, // total bytes
16, // num writes
0, // num initial clones
0, // num streams to close after each write
1, // num clones to add after each write
0); // num streams to read after each write
}
TEST(Pipes, Clone_DuringWrite_ReadDuringWrite)
{
TestPipeClone(32 * 1024, // total bytes
16, // num writes
0, // num initial clones
0, // num streams to close after each write
1, // num clones to add after each write
1); // num streams to read after each write
}
TEST(Pipes, Clone_DuringWrite_ReadDuringWrite_CloseDuringWrite)
{
// Since this reads streams faster than we clone new ones, it should
// trigger pipe segment deletion periodically. Currently we can
// only verify this with logging.
TestPipeClone(32 * 1024, // total bytes
16, // num writes
1, // num initial clones
1, // num streams to close after each write
2, // num clones to add after each write
3); // num streams to read after each write
}
TEST(Pipes, Write_AsyncWait)
{
nsCOMPtr<nsIAsyncInputStream> reader;
nsCOMPtr<nsIAsyncOutputStream> writer;
const uint32_t segmentSize = 1024;
const uint32_t numSegments = 1;
nsresult rv = NS_NewPipe2(getter_AddRefs(reader), getter_AddRefs(writer),
true, true, // non-blocking - reader, writer
segmentSize, numSegments);
ASSERT_TRUE(NS_SUCCEEDED(rv));
nsTArray<char> inputData;
testing::CreateData(segmentSize, inputData);
uint32_t numWritten = 0;
rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
ASSERT_TRUE(NS_SUCCEEDED(rv));
rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
ASSERT_EQ(NS_BASE_STREAM_WOULD_BLOCK, rv);
nsRefPtr<testing::OutputStreamCallback> cb =
new testing::OutputStreamCallback();
rv = writer->AsyncWait(cb, 0, 0, nullptr);
ASSERT_TRUE(NS_SUCCEEDED(rv));
ASSERT_FALSE(cb->Called());
testing::ConsumeAndValidateStream(reader, inputData);
ASSERT_TRUE(cb->Called());
}
TEST(Pipes, Write_AsyncWait_Clone)
{
nsCOMPtr<nsIAsyncInputStream> reader;
nsCOMPtr<nsIAsyncOutputStream> writer;
const uint32_t segmentSize = 1024;
const uint32_t numSegments = 1;
nsresult rv = NS_NewPipe2(getter_AddRefs(reader), getter_AddRefs(writer),
true, true, // non-blocking - reader, writer
segmentSize, numSegments);
ASSERT_TRUE(NS_SUCCEEDED(rv));
nsCOMPtr<nsIInputStream> clone;
rv = NS_CloneInputStream(reader, getter_AddRefs(clone));
ASSERT_TRUE(NS_SUCCEEDED(rv));
nsTArray<char> inputData;
testing::CreateData(segmentSize, inputData);
uint32_t numWritten = 0;
rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
ASSERT_TRUE(NS_SUCCEEDED(rv));
rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
ASSERT_EQ(NS_BASE_STREAM_WOULD_BLOCK, rv);
nsRefPtr<testing::OutputStreamCallback> cb =
new testing::OutputStreamCallback();
rv = writer->AsyncWait(cb, 0, 0, nullptr);
ASSERT_TRUE(NS_SUCCEEDED(rv));
ASSERT_FALSE(cb->Called());
testing::ConsumeAndValidateStream(reader, inputData);
ASSERT_FALSE(cb->Called());
testing::ConsumeAndValidateStream(clone, inputData);
ASSERT_TRUE(cb->Called());
}
TEST(Pipes, Write_AsyncWait_Clone_CloseOriginal)
{
nsCOMPtr<nsIAsyncInputStream> reader;
nsCOMPtr<nsIAsyncOutputStream> writer;
const uint32_t segmentSize = 1024;
const uint32_t numSegments = 1;
nsresult rv = NS_NewPipe2(getter_AddRefs(reader), getter_AddRefs(writer),
true, true, // non-blocking - reader, writer
segmentSize, numSegments);
ASSERT_TRUE(NS_SUCCEEDED(rv));
nsCOMPtr<nsIInputStream> clone;
rv = NS_CloneInputStream(reader, getter_AddRefs(clone));
ASSERT_TRUE(NS_SUCCEEDED(rv));
nsTArray<char> inputData;
testing::CreateData(segmentSize, inputData);
uint32_t numWritten = 0;
rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
ASSERT_TRUE(NS_SUCCEEDED(rv));
rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
ASSERT_EQ(NS_BASE_STREAM_WOULD_BLOCK, rv);
nsRefPtr<testing::OutputStreamCallback> cb =
new testing::OutputStreamCallback();
rv = writer->AsyncWait(cb, 0, 0, nullptr);
ASSERT_TRUE(NS_SUCCEEDED(rv));
ASSERT_FALSE(cb->Called());
testing::ConsumeAndValidateStream(clone, inputData);
ASSERT_FALSE(cb->Called());
reader->Close();
ASSERT_TRUE(cb->Called());
}
TEST(Pipes, Read_AsyncWait)
{
nsCOMPtr<nsIAsyncInputStream> reader;
nsCOMPtr<nsIAsyncOutputStream> writer;
const uint32_t segmentSize = 1024;
const uint32_t numSegments = 1;
nsresult rv = NS_NewPipe2(getter_AddRefs(reader), getter_AddRefs(writer),
true, true, // non-blocking - reader, writer
segmentSize, numSegments);
ASSERT_TRUE(NS_SUCCEEDED(rv));
nsTArray<char> inputData;
testing::CreateData(segmentSize, inputData);
nsRefPtr<testing::InputStreamCallback> cb =
new testing::InputStreamCallback();
rv = reader->AsyncWait(cb, 0, 0, nullptr);
ASSERT_TRUE(NS_SUCCEEDED(rv));
ASSERT_FALSE(cb->Called());
uint32_t numWritten = 0;
rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
ASSERT_TRUE(NS_SUCCEEDED(rv));
ASSERT_TRUE(cb->Called());
testing::ConsumeAndValidateStream(reader, inputData);
}
TEST(Pipes, Read_AsyncWait_Clone)
{
nsCOMPtr<nsIAsyncInputStream> reader;
nsCOMPtr<nsIAsyncOutputStream> writer;
const uint32_t segmentSize = 1024;
const uint32_t numSegments = 1;
nsresult rv = NS_NewPipe2(getter_AddRefs(reader), getter_AddRefs(writer),
true, true, // non-blocking - reader, writer
segmentSize, numSegments);
ASSERT_TRUE(NS_SUCCEEDED(rv));
nsCOMPtr<nsIInputStream> clone;
rv = NS_CloneInputStream(reader, getter_AddRefs(clone));
ASSERT_TRUE(NS_SUCCEEDED(rv));
nsCOMPtr<nsIAsyncInputStream> asyncClone = do_QueryInterface(clone);
ASSERT_TRUE(asyncClone);
nsTArray<char> inputData;
testing::CreateData(segmentSize, inputData);
nsRefPtr<testing::InputStreamCallback> cb =
new testing::InputStreamCallback();
nsRefPtr<testing::InputStreamCallback> cb2 =
new testing::InputStreamCallback();
rv = reader->AsyncWait(cb, 0, 0, nullptr);
ASSERT_TRUE(NS_SUCCEEDED(rv));
ASSERT_FALSE(cb->Called());
rv = asyncClone->AsyncWait(cb2, 0, 0, nullptr);
ASSERT_TRUE(NS_SUCCEEDED(rv));
ASSERT_FALSE(cb2->Called());
uint32_t numWritten = 0;
rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
ASSERT_TRUE(NS_SUCCEEDED(rv));
ASSERT_TRUE(cb->Called());
ASSERT_TRUE(cb2->Called());
testing::ConsumeAndValidateStream(reader, inputData);
}
namespace {
NS_METHOD
CloseDuringReadFunc(nsIInputStream *aReader,
void* aClosure,
const char* aFromSegment,
uint32_t aToOffset,
uint32_t aCount,
uint32_t* aWriteCountOut)
{
MOZ_ASSERT(aReader);
MOZ_ASSERT(aClosure);
MOZ_ASSERT(aFromSegment);
MOZ_ASSERT(aWriteCountOut);
MOZ_ASSERT(aToOffset == 0);
// This is insanity and you probably should not do this under normal
// conditions. We want to simulate the case where the pipe is closed
// (possibly from other end on another thread) simultaneously with the
// read. This is the easiest way to do trigger this case in a synchronous
// gtest.
MOZ_ALWAYS_TRUE(NS_SUCCEEDED(aReader->Close()));
nsTArray<char>* buffer = static_cast<nsTArray<char>*>(aClosure);
buffer->AppendElements(aFromSegment, aCount);
*aWriteCountOut = aCount;
return NS_OK;
}
void
TestCloseDuringRead(uint32_t aSegmentSize, uint32_t aDataSize)
{
nsCOMPtr<nsIInputStream> reader;
nsCOMPtr<nsIOutputStream> writer;
const uint32_t maxSize = aSegmentSize;
nsresult rv = NS_NewPipe(getter_AddRefs(reader), getter_AddRefs(writer),
aSegmentSize, maxSize);
ASSERT_TRUE(NS_SUCCEEDED(rv));
nsTArray<char> inputData;
testing::CreateData(aDataSize, inputData);
uint32_t numWritten = 0;
rv = writer->Write(inputData.Elements(), inputData.Length(), &numWritten);
ASSERT_TRUE(NS_SUCCEEDED(rv));
nsTArray<char> outputData;
uint32_t numRead = 0;
rv = reader->ReadSegments(CloseDuringReadFunc, &outputData,
inputData.Length(), &numRead);
ASSERT_TRUE(NS_SUCCEEDED(rv));
ASSERT_EQ(inputData.Length(), numRead);
ASSERT_EQ(inputData, outputData);
uint64_t available;
rv = reader->Available(&available);
ASSERT_EQ(NS_BASE_STREAM_CLOSED, rv);
}
} // namespace
TEST(Pipes, Close_During_Read_Partial_Segment)
{
TestCloseDuringRead(1024, 512);
}
TEST(Pipes, Close_During_Read_Full_Segment)
{
TestCloseDuringRead(1024, 1024);
}