gecko/nsprpub/pr/tests/errset.c

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is the Netscape security libraries.
 *
 * The Initial Developer of the Original Code is
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 1998-2000
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

/***********************************************************************
**
** Name: errset.c
**
** Description: errset.c exercises the functions in prerror.c.
** This code is a unit test of the prerror.c capability.
**
** Note: There's some fluff in here. The guts of the test
** were plagerized from another test. So, sue me.
**
**
*/
#include "prerror.h"
#include "plgetopt.h"
#include "prlog.h"

#include <stdio.h>
#include <string.h>

static int _debug_on = 0;

struct errinfo {
	PRErrorCode errcode;
	char 		*errname;
};

struct errinfo errcodes[] = {
{PR_OUT_OF_MEMORY_ERROR,			"PR_OUT_OF_MEMORY_ERROR"},
{PR_UNKNOWN_ERROR, "An intentionally long error message text intended to force a delete of the current errorString buffer and get another one."},
{PR_BAD_DESCRIPTOR_ERROR,			"PR_BAD_DESCRIPTOR_ERROR"},
{PR_WOULD_BLOCK_ERROR,				"PR_WOULD_BLOCK_ERROR"},
{PR_ACCESS_FAULT_ERROR,				"PR_ACCESS_FAULT_ERROR"},
{PR_INVALID_METHOD_ERROR,			"PR_INVALID_METHOD_ERROR"},
{PR_ILLEGAL_ACCESS_ERROR,			"PR_ILLEGAL_ACCESS_ERROR"},
{PR_UNKNOWN_ERROR,					"PR_UNKNOWN_ERROR"},
{PR_PENDING_INTERRUPT_ERROR,		"PR_PENDING_INTERRUPT_ERROR"},
{PR_NOT_IMPLEMENTED_ERROR,			"PR_NOT_IMPLEMENTED_ERROR"},
{PR_IO_ERROR,						"PR_IO_ERROR"},
{PR_IO_TIMEOUT_ERROR,				"PR_IO_TIMEOUT_ERROR"},
{PR_IO_PENDING_ERROR,				"PR_IO_PENDING_ERROR"},
{PR_DIRECTORY_OPEN_ERROR,			"PR_DIRECTORY_OPEN_ERROR"},
{PR_INVALID_ARGUMENT_ERROR,			"PR_INVALID_ARGUMENT_ERROR"},
{PR_ADDRESS_NOT_AVAILABLE_ERROR,	"PR_ADDRESS_NOT_AVAILABLE_ERROR"},
{PR_ADDRESS_NOT_SUPPORTED_ERROR,	"PR_ADDRESS_NOT_SUPPORTED_ERROR"},
{PR_IS_CONNECTED_ERROR,				"PR_IS_CONNECTED_ERROR"},
{PR_BAD_ADDRESS_ERROR,				"PR_BAD_ADDRESS_ERROR"},
{PR_ADDRESS_IN_USE_ERROR,			"PR_ADDRESS_IN_USE_ERROR"},
{PR_CONNECT_REFUSED_ERROR,			"PR_CONNECT_REFUSED_ERROR"},
{PR_NETWORK_UNREACHABLE_ERROR,		"PR_NETWORK_UNREACHABLE_ERROR"},
{PR_CONNECT_TIMEOUT_ERROR,			"PR_CONNECT_TIMEOUT_ERROR"},
{PR_NOT_CONNECTED_ERROR,			"PR_NOT_CONNECTED_ERROR"},
{PR_LOAD_LIBRARY_ERROR,				"PR_LOAD_LIBRARY_ERROR"},
{PR_UNLOAD_LIBRARY_ERROR,			"PR_UNLOAD_LIBRARY_ERROR"},
{PR_FIND_SYMBOL_ERROR,				"PR_FIND_SYMBOL_ERROR"},
{PR_INSUFFICIENT_RESOURCES_ERROR,	"PR_INSUFFICIENT_RESOURCES_ERROR"},
{PR_DIRECTORY_LOOKUP_ERROR,			"PR_DIRECTORY_LOOKUP_ERROR"},
{PR_TPD_RANGE_ERROR,				"PR_TPD_RANGE_ERROR"},
{PR_PROC_DESC_TABLE_FULL_ERROR,		"PR_PROC_DESC_TABLE_FULL_ERROR"},
{PR_SYS_DESC_TABLE_FULL_ERROR,		"PR_SYS_DESC_TABLE_FULL_ERROR"},
{PR_NOT_SOCKET_ERROR,				"PR_NOT_SOCKET_ERROR"},
{PR_NOT_TCP_SOCKET_ERROR,			"PR_NOT_TCP_SOCKET_ERROR"},
{PR_SOCKET_ADDRESS_IS_BOUND_ERROR,	"PR_SOCKET_ADDRESS_IS_BOUND_ERROR"},
{PR_NO_ACCESS_RIGHTS_ERROR,			"PR_NO_ACCESS_RIGHTS_ERROR"},
{PR_OPERATION_NOT_SUPPORTED_ERROR,	"PR_OPERATION_NOT_SUPPORTED_ERROR"},
{PR_PROTOCOL_NOT_SUPPORTED_ERROR,	"PR_PROTOCOL_NOT_SUPPORTED_ERROR"},
{PR_REMOTE_FILE_ERROR,				"PR_REMOTE_FILE_ERROR"},
{PR_BUFFER_OVERFLOW_ERROR,			"PR_BUFFER_OVERFLOW_ERROR"},
{PR_CONNECT_RESET_ERROR,			"PR_CONNECT_RESET_ERROR"},
{PR_RANGE_ERROR,					"PR_RANGE_ERROR"},
{PR_DEADLOCK_ERROR,					"PR_DEADLOCK_ERROR"},
{PR_FILE_IS_LOCKED_ERROR,			"PR_FILE_IS_LOCKED_ERROR"},
{PR_FILE_TOO_BIG_ERROR,				"PR_FILE_TOO_BIG_ERROR"},
{PR_NO_DEVICE_SPACE_ERROR,			"PR_NO_DEVICE_SPACE_ERROR"},
{PR_PIPE_ERROR,						"PR_PIPE_ERROR"},
{PR_NO_SEEK_DEVICE_ERROR,			"PR_NO_SEEK_DEVICE_ERROR"},
{PR_IS_DIRECTORY_ERROR,				"PR_IS_DIRECTORY_ERROR"},
{PR_LOOP_ERROR,						"PR_LOOP_ERROR"},
{PR_NAME_TOO_LONG_ERROR,			"PR_NAME_TOO_LONG_ERROR"},
{PR_FILE_NOT_FOUND_ERROR,			"PR_FILE_NOT_FOUND_ERROR"},
{PR_NOT_DIRECTORY_ERROR,			"PR_NOT_DIRECTORY_ERROR"},
{PR_READ_ONLY_FILESYSTEM_ERROR,		"PR_READ_ONLY_FILESYSTEM_ERROR"},
{PR_DIRECTORY_NOT_EMPTY_ERROR,		"PR_DIRECTORY_NOT_EMPTY_ERROR"},
{PR_FILESYSTEM_MOUNTED_ERROR,		"PR_FILESYSTEM_MOUNTED_ERROR"},
{PR_NOT_SAME_DEVICE_ERROR,			"PR_NOT_SAME_DEVICE_ERROR"},
{PR_DIRECTORY_CORRUPTED_ERROR,		"PR_DIRECTORY_CORRUPTED_ERROR"},
{PR_FILE_EXISTS_ERROR,				"PR_FILE_EXISTS_ERROR"},
{PR_MAX_DIRECTORY_ENTRIES_ERROR,	"PR_MAX_DIRECTORY_ENTRIES_ERROR"},
{PR_INVALID_DEVICE_STATE_ERROR,		"PR_INVALID_DEVICE_STATE_ERROR"},
{PR_DEVICE_IS_LOCKED_ERROR,			"PR_DEVICE_IS_LOCKED_ERROR"},
{PR_NO_MORE_FILES_ERROR,			"PR_NO_MORE_FILES_ERROR"},
{PR_END_OF_FILE_ERROR,				"PR_END_OF_FILE_ERROR"},
{PR_FILE_SEEK_ERROR,				"PR_FILE_SEEK_ERROR"},
{PR_FILE_IS_BUSY_ERROR,				"PR_FILE_IS_BUSY_ERROR"},
{PR_IN_PROGRESS_ERROR,				"PR_IN_PROGRESS_ERROR"},
{PR_ALREADY_INITIATED_ERROR,		"PR_ALREADY_INITIATED_ERROR"},
{PR_GROUP_EMPTY_ERROR,				"PR_GROUP_EMPTY_ERROR"},
{PR_INVALID_STATE_ERROR,			"PR_INVALID_STATE_ERROR"},
{PR_NETWORK_DOWN_ERROR,				"PR_NETWORK_DOWN_ERROR"},
{PR_SOCKET_SHUTDOWN_ERROR,			"PR_SOCKET_SHUTDOWN_ERROR"},
{PR_CONNECT_ABORTED_ERROR,			"PR_CONNECT_ABORTED_ERROR"},
{PR_HOST_UNREACHABLE_ERROR,			"PR_HOST_UNREACHABLE_ERROR"}
};

int
main(int argc, char **argv)
{

	int count, errnum;

    /*
     * -d           debug mode
     */

    PLOptStatus os;
    PLOptState *opt = PL_CreateOptState(argc, argv, "d");
    while (PL_OPT_EOL != (os = PL_GetNextOpt(opt)))
    {
        if (PL_OPT_BAD == os) continue;
        switch (opt->option)
        {
        case 'd':  /* debug mode */
            _debug_on = 1;
            break;
        default:
            break;
        }
    }
    PL_DestroyOptState(opt);

	count = sizeof(errcodes)/sizeof(errcodes[0]);
	printf("\nNumber of error codes = %d\n\n",count);
	for (errnum = 0; errnum < count; errnum++) {
        PRInt32 len1, len2, err;
        char    msg[256];

        PR_SetError( errnum, -5 );
        err = PR_GetError();
        PR_ASSERT( err == errnum );
        err = PR_GetOSError();
        PR_ASSERT( err == -5 );
        PR_SetErrorText( strlen(errcodes[errnum].errname), errcodes[errnum].errname );
        len1 = PR_GetErrorTextLength();
        len2 = PR_GetErrorText( msg );
        PR_ASSERT( len1 == len2 );
        printf("%5.5d -- %s\n", errnum, msg );
    }

	return 0;
}