gecko/gfx/layers/basic/BasicImages.cpp

/* -*- Mode: C++; tab-width: 20; indent-tabs-mode: nil; c-basic-offset: 4 -*-
 * ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is Mozilla Corporation code.
 *
 * The Initial Developer of the Original Code is Mozilla Foundation.
 * Portions created by the Initial Developer are Copyright (C) 2009
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *   Robert O'Callahan <robert@ocallahan.org>
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

#include "mozilla/Monitor.h"

#include "ImageLayers.h"
#include "BasicLayers.h"
#include "gfxImageSurface.h"

#ifdef XP_MACOSX
#include "gfxQuartzImageSurface.h"
#endif

#include "cairo.h"

using mozilla::Monitor;

namespace mozilla {
namespace layers {

/**
 * All our images can yield up a cairo surface and their size.
 */
class BasicImageImplData {
public:
  /**
   * This must be called on the main thread.
   */
  virtual already_AddRefed<gfxASurface> GetAsSurface() = 0;

  gfxIntSize GetSize() { return mSize; }

protected:
  gfxIntSize mSize;
};

/**
 * Since BasicLayers only paint on the main thread, handling a CairoImage
 * is extremely simple. We just hang on to a reference to the surface and
 * return that surface when BasicImageLayer::Paint asks for it via
 * BasicImageContainer::GetAsSurface.
 */
class BasicCairoImage : public CairoImage, public BasicImageImplData {
public:
  BasicCairoImage() : CairoImage(static_cast<BasicImageImplData*>(this)) {}

  virtual void SetData(const Data& aData)
  {
    mSurface = aData.mSurface;
    mSize = aData.mSize;
  }

  virtual already_AddRefed<gfxASurface> GetAsSurface()
  {
    NS_ASSERTION(NS_IsMainThread(), "Must be main thread");
    nsRefPtr<gfxASurface> surface = mSurface.get();
    return surface.forget();
  }

protected:
  nsCountedRef<nsMainThreadSurfaceRef> mSurface;
};

/**
 * We handle YCbCr by converting to RGB when the image is initialized
 * (which should be done off the main thread). The RGB results are stored
 * in a memory buffer and converted to a cairo surface lazily.
 */
class BasicPlanarYCbCrImage : public PlanarYCbCrImage, public BasicImageImplData {
public:
  BasicPlanarYCbCrImage() :
    PlanarYCbCrImage(static_cast<BasicImageImplData*>(this)),
    mToARGB(nsnull)
    {}

  virtual void SetRGBConverter(ToARGBHook aHook) { mToARGB = aHook; }
  virtual void SetData(const Data& aData);

  virtual already_AddRefed<gfxASurface> GetAsSurface();

protected:
  ToARGBHook                           mToARGB;
  nsAutoArrayPtr<PRUint8>              mBuffer;
  nsCountedRef<nsMainThreadSurfaceRef> mSurface;
};

void
BasicPlanarYCbCrImage::SetData(const Data& aData)
{
  // Do some sanity checks to prevent integer overflow
  if (aData.mYSize.width > 16384 || aData.mYSize.height > 16384) {
    NS_ERROR("Illegal width or height");
    return;
  }
  size_t size = aData.mYSize.width*aData.mYSize.height*4;
  mBuffer = new PRUint8[size];
  if (!mBuffer) {
    // out of memory
    return;
  }

  // Convert from YCbCr to RGB now
  mToARGB(aData, mBuffer);
  mSize = aData.mYSize;
}

static cairo_user_data_key_t imageSurfaceDataKey;

static void
DestroyBuffer(void* aBuffer)
{
  delete[] static_cast<PRUint8*>(aBuffer);
}

already_AddRefed<gfxASurface>
BasicPlanarYCbCrImage::GetAsSurface()
{
  NS_ASSERTION(NS_IsMainThread(), "Must be main thread");

  if (mSurface) {
    nsRefPtr<gfxASurface> result = mSurface.get();
    return result.forget();
  }

  if (!mBuffer) {
    return nsnull;
  }
  nsRefPtr<gfxImageSurface> imgSurface =
      new gfxImageSurface(mBuffer, mSize,
                          mSize.width * 4,
                          gfxASurface::ImageFormatRGB24);
  if (!imgSurface) {
    return nsnull;
  }

  // Pass ownership of the buffer to the surface
  imgSurface->SetData(&imageSurfaceDataKey, mBuffer.forget(), DestroyBuffer);

  nsRefPtr<gfxASurface> result = imgSurface.get();
#if defined(XP_MACOSX)
  nsRefPtr<gfxQuartzImageSurface> quartzSurface =
    new gfxQuartzImageSurface(imgSurface);
  if (quartzSurface) {
    result = quartzSurface.forget();
  }
#endif
  mSurface = result.get();

  return result.forget();
}

/**
 * Our image container is very simple. It's really just a factory
 * for the image objects. We use a Monitor to synchronize access to
 * mImage.
 */
class BasicImageContainer : public ImageContainer {
public:
  BasicImageContainer(BasicLayerManager* aManager) :
    ImageContainer(aManager), mMonitor("BasicImageContainer")
  {}
  virtual already_AddRefed<Image> CreateImage(const Image::Format* aFormats,
                                              PRUint32 aNumFormats);
  virtual void SetCurrentImage(Image* aImage);
  virtual already_AddRefed<Image> GetCurrentImage();
  virtual already_AddRefed<gfxASurface> GetCurrentAsSurface(gfxIntSize* aSize);

protected:
  Monitor mMonitor;
  nsRefPtr<Image> mImage;
};

/**
 * Returns true if aFormat is in the given format array.
 */
static PRBool
FormatInList(const Image::Format* aFormats, PRUint32 aNumFormats,
             Image::Format aFormat)
{
  for (PRUint32 i = 0; i < aNumFormats; ++i) {
    if (aFormats[i] == aFormat) {
      return PR_TRUE;
    }
  }
  return PR_FALSE;
}

already_AddRefed<Image>
BasicImageContainer::CreateImage(const Image::Format* aFormats,
                                 PRUint32 aNumFormats)
{
  nsRefPtr<Image> image;
  // Prefer cairo surfaces because they're native for us
  if (FormatInList(aFormats, aNumFormats, Image::CAIRO_SURFACE)) {
    image = new BasicCairoImage();
  } else if (FormatInList(aFormats, aNumFormats, Image::PLANAR_YCBCR)) {
    image = new BasicPlanarYCbCrImage();
  }
  return image.forget();
}

void
BasicImageContainer::SetCurrentImage(Image* aImage)
{
  MonitorAutoEnter mon(mMonitor);
  mImage = aImage;
}

already_AddRefed<Image>
BasicImageContainer::GetCurrentImage()
{
  MonitorAutoEnter mon(mMonitor);
  nsRefPtr<Image> image = mImage;
  return image.forget();
}

static BasicImageImplData*
ToImageData(Image* aImage)
{
  return static_cast<BasicImageImplData*>(aImage->GetImplData());
}

already_AddRefed<gfxASurface>
BasicImageContainer::GetCurrentAsSurface(gfxIntSize* aSizeResult)
{
  NS_PRECONDITION(NS_IsMainThread(), "Must be called on main thread");

  MonitorAutoEnter mon(mMonitor);
  if (!mImage) {
    return nsnull;
  }
  *aSizeResult = ToImageData(mImage)->GetSize();
  return ToImageData(mImage)->GetAsSurface();
}

already_AddRefed<ImageContainer>
BasicLayerManager::CreateImageContainer()
{
  nsRefPtr<ImageContainer> container = new BasicImageContainer(this);
  return container.forget();
}

}
}