gecko/nsprpub/pr/include/private/pprthred.h
2008-06-06 08:36:51 -04:00

374 lines
13 KiB
C

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Netscape Portable Runtime (NSPR).
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998-2000
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#ifndef pprthred_h___
#define pprthred_h___
/*
** API for PR private functions. These calls are to be used by internal
** developers only.
*/
#include "nspr.h"
#if defined(XP_OS2)
#define INCL_DOS
#define INCL_DOSERRORS
#define INCL_WIN
#include <os2.h>
#endif
PR_BEGIN_EXTERN_C
/*---------------------------------------------------------------------------
** THREAD PRIVATE FUNCTIONS
---------------------------------------------------------------------------*/
/*
** Associate a thread object with an existing native thread.
** "type" is the type of thread object to attach
** "priority" is the priority to assign to the thread
** "stack" defines the shape of the threads stack
**
** This can return NULL if some kind of error occurs, or if memory is
** tight. This call invokes "start(obj,arg)" and returns when the
** function returns. The thread object is automatically destroyed.
**
** This call is not normally needed unless you create your own native
** thread. PR_Init does this automatically for the primordial thread.
*/
NSPR_API(PRThread*) PR_AttachThread(PRThreadType type,
PRThreadPriority priority,
PRThreadStack *stack);
/*
** Detach the nspr thread from the currently executing native thread.
** The thread object will be destroyed and all related data attached
** to it. The exit procs will be invoked.
**
** This call is not normally needed unless you create your own native
** thread. PR_Exit will automatially detach the nspr thread object
** created by PR_Init for the primordial thread.
**
** This call returns after the nspr thread object is destroyed.
*/
NSPR_API(void) PR_DetachThread(void);
/*
** Get the id of the named thread. Each thread is assigned a unique id
** when it is created or attached.
*/
NSPR_API(PRUint32) PR_GetThreadID(PRThread *thread);
/*
** Set the procedure that is called when a thread is dumped. The procedure
** will be applied to the argument, arg, when called. Setting the procedure
** to NULL effectively removes it.
*/
typedef void (*PRThreadDumpProc)(PRFileDesc *fd, PRThread *t, void *arg);
NSPR_API(void) PR_SetThreadDumpProc(
PRThread* thread, PRThreadDumpProc dump, void *arg);
/*
** Get this thread's affinity mask. The affinity mask is a 32 bit quantity
** marking a bit for each processor this process is allowed to run on.
** The processor mask is returned in the mask argument.
** The least-significant-bit represents processor 0.
**
** Returns 0 on success, -1 on failure.
*/
NSPR_API(PRInt32) PR_GetThreadAffinityMask(PRThread *thread, PRUint32 *mask);
/*
** Set this thread's affinity mask.
**
** Returns 0 on success, -1 on failure.
*/
NSPR_API(PRInt32) PR_SetThreadAffinityMask(PRThread *thread, PRUint32 mask );
/*
** Set the default CPU Affinity mask.
**
*/
NSPR_API(PRInt32) PR_SetCPUAffinityMask(PRUint32 mask);
/*
** Show status of all threads to standard error output.
*/
NSPR_API(void) PR_ShowStatus(void);
/*
** Set thread recycle mode to on (1) or off (0)
*/
NSPR_API(void) PR_SetThreadRecycleMode(PRUint32 flag);
/*---------------------------------------------------------------------------
** THREAD PRIVATE FUNCTIONS FOR GARBAGE COLLECTIBLE THREADS
---------------------------------------------------------------------------*/
/*
** Only Garbage collectible threads participate in resume all, suspend all and
** enumeration operations. They are also different during creation when
** platform specific action may be needed (For example, all Solaris GC able
** threads are bound threads).
*/
/*
** Same as PR_CreateThread except that the thread is marked as garbage
** collectible.
*/
NSPR_API(PRThread*) PR_CreateThreadGCAble(PRThreadType type,
void (*start)(void *arg),
void *arg,
PRThreadPriority priority,
PRThreadScope scope,
PRThreadState state,
PRUint32 stackSize);
/*
** Same as PR_AttachThread except that the thread being attached is marked as
** garbage collectible.
*/
NSPR_API(PRThread*) PR_AttachThreadGCAble(PRThreadType type,
PRThreadPriority priority,
PRThreadStack *stack);
/*
** Mark the thread as garbage collectible.
*/
NSPR_API(void) PR_SetThreadGCAble(void);
/*
** Unmark the thread as garbage collectible.
*/
NSPR_API(void) PR_ClearThreadGCAble(void);
/*
** This routine prevents all other GC able threads from running. This call is needed by
** the garbage collector.
*/
NSPR_API(void) PR_SuspendAll(void);
/*
** This routine unblocks all other GC able threads that were suspended from running by
** PR_SuspendAll(). This call is needed by the garbage collector.
*/
NSPR_API(void) PR_ResumeAll(void);
/*
** Return the thread stack pointer of the given thread.
** Needed by the garbage collector.
*/
NSPR_API(void *) PR_GetSP(PRThread *thread);
/*
** Save the registers that the GC would find interesting into the thread
** "t". isCurrent will be non-zero if the thread state that is being
** saved is the currently executing thread. Return the address of the
** first register to be scanned as well as the number of registers to
** scan in "np".
**
** If "isCurrent" is non-zero then it is allowed for the thread context
** area to be used as scratch storage to hold just the registers
** necessary for scanning.
**
** This function simply calls the internal function _MD_HomeGCRegisters().
*/
NSPR_API(PRWord *) PR_GetGCRegisters(PRThread *t, int isCurrent, int *np);
/*
** (Get|Set)ExecutionEnvironent
**
** Used by Java to associate it's execution environment so garbage collector
** can find it. If return is NULL, then it's probably not a collectable thread.
**
** There's no locking required around these calls.
*/
NSPR_API(void*) GetExecutionEnvironment(PRThread *thread);
NSPR_API(void) SetExecutionEnvironment(PRThread* thread, void *environment);
/*
** Enumeration function that applies "func(thread,i,arg)" to each active
** thread in the process. The enumerator returns PR_SUCCESS if the enumeration
** should continue, any other value is considered failure, and enumeration
** stops, returning the failure value from PR_EnumerateThreads.
** Needed by the garbage collector.
*/
typedef PRStatus (PR_CALLBACK *PREnumerator)(PRThread *t, int i, void *arg);
NSPR_API(PRStatus) PR_EnumerateThreads(PREnumerator func, void *arg);
/*
** Signature of a thread stack scanning function. It is applied to every
** contiguous group of potential pointers within a thread. Count denotes the
** number of pointers.
*/
typedef PRStatus
(PR_CALLBACK *PRScanStackFun)(PRThread* t,
void** baseAddr, PRUword count, void* closure);
/*
** Applies scanFun to all contiguous groups of potential pointers
** within a thread. This includes the stack, registers, and thread-local
** data. If scanFun returns a status value other than PR_SUCCESS the scan
** is aborted, and the status value is returned.
*/
NSPR_API(PRStatus)
PR_ThreadScanStackPointers(PRThread* t,
PRScanStackFun scanFun, void* scanClosure);
/*
** Calls PR_ThreadScanStackPointers for every thread.
*/
NSPR_API(PRStatus)
PR_ScanStackPointers(PRScanStackFun scanFun, void* scanClosure);
/*
** Returns a conservative estimate on the amount of stack space left
** on a thread in bytes, sufficient for making decisions about whether
** to continue recursing or not.
*/
NSPR_API(PRUword)
PR_GetStackSpaceLeft(PRThread* t);
/*---------------------------------------------------------------------------
** THREAD CPU PRIVATE FUNCTIONS
---------------------------------------------------------------------------*/
/*
** Get a pointer to the primordial CPU.
*/
NSPR_API(struct _PRCPU *) _PR_GetPrimordialCPU(void);
/*---------------------------------------------------------------------------
** THREAD SYNCHRONIZATION PRIVATE FUNCTIONS
---------------------------------------------------------------------------*/
/*
** Create a new named monitor (named for debugging purposes).
** Monitors are re-entrant locks with a built-in condition variable.
**
** This may fail if memory is tight or if some operating system resource
** is low.
*/
NSPR_API(PRMonitor*) PR_NewNamedMonitor(const char* name);
/*
** Test and then lock the lock if it's not already locked by some other
** thread. Return PR_FALSE if some other thread owned the lock at the
** time of the call.
*/
NSPR_API(PRBool) PR_TestAndLock(PRLock *lock);
/*
** Test and then enter the mutex associated with the monitor if it's not
** already entered by some other thread. Return PR_FALSE if some other
** thread owned the mutex at the time of the call.
*/
NSPR_API(PRBool) PR_TestAndEnterMonitor(PRMonitor *mon);
/*
** Return the number of times that the current thread has entered the
** mutex. Returns zero if the current thread has not entered the mutex.
*/
NSPR_API(PRIntn) PR_GetMonitorEntryCount(PRMonitor *mon);
/*
** Just like PR_CEnterMonitor except that if the monitor is owned by
** another thread NULL is returned.
*/
NSPR_API(PRMonitor*) PR_CTestAndEnterMonitor(void *address);
/*---------------------------------------------------------------------------
** PLATFORM-SPECIFIC THREAD SYNCHRONIZATION FUNCTIONS
---------------------------------------------------------------------------*/
#if defined(XP_MAC)
NSPR_API(void) PR_Mac_WaitForAsyncNotify(PRIntervalTime timeout);
NSPR_API(void) PR_Mac_PostAsyncNotify(PRThread *thread);
#endif /* XP_MAC */
/*---------------------------------------------------------------------------
** PLATFORM-SPECIFIC INITIALIZATION FUNCTIONS
---------------------------------------------------------------------------*/
#if defined(IRIX)
/*
** Irix specific initialization funtion to be called before PR_Init
** is called by the application. Sets the CONF_INITUSERS and CONF_INITSIZE
** attributes of the shared arena set up by nspr.
**
** The environment variables _NSPR_IRIX_INITUSERS and _NSPR_IRIX_INITSIZE
** can also be used to set these arena attributes. If _NSPR_IRIX_INITUSERS
** is set, but not _NSPR_IRIX_INITSIZE, the value of the CONF_INITSIZE
** attribute of the nspr arena is scaled as a function of the
** _NSPR_IRIX_INITUSERS value.
**
** If the _PR_Irix_Set_Arena_Params() is called in addition to setting the
** environment variables, the values of the environment variables are used.
**
*/
NSPR_API(void) _PR_Irix_Set_Arena_Params(PRInt32 initusers, PRInt32 initsize);
#endif /* IRIX */
#if defined(XP_OS2)
/*
** These functions need to be called at the start and end of a thread.
** An EXCEPTIONREGISTRATIONRECORD must be declared on the stack and its
** address passed to the two functions.
*/
NSPR_API(void) PR_OS2_SetFloatExcpHandler(EXCEPTIONREGISTRATIONRECORD* e);
NSPR_API(void) PR_OS2_UnsetFloatExcpHandler(EXCEPTIONREGISTRATIONRECORD* e);
#endif /* XP_OS2 */
/* I think PR_GetMonitorEntryCount is useless. All you really want is this... */
#define PR_InMonitor(m) (PR_GetMonitorEntryCount(m) > 0)
/*---------------------------------------------------------------------------
** Special X-Lock hack for client
---------------------------------------------------------------------------*/
#ifdef XP_UNIX
extern void PR_XLock(void);
extern void PR_XUnlock(void);
extern PRBool PR_XIsLocked(void);
#endif /* XP_UNIX */
PR_END_EXTERN_C
#endif /* pprthred_h___ */