gecko/content/base/public/nsIXMLHttpRequest.idl
2010-02-24 21:58:18 -08:00

411 lines
16 KiB
Plaintext

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include "nsIDOMEventTarget.idl"
interface nsIChannel;
interface nsIDOMDocument;
interface nsIDOMEventListener;
interface nsIPrincipal;
interface nsIScriptContext;
interface nsIURI;
interface nsIVariant;
interface nsPIDOMWindow;
interface nsIInputStream;
[scriptable, uuid(6ce0a193-b033-4c3d-b748-f851b09261f5)]
interface nsIXMLHttpRequestEventTarget : nsIDOMEventTarget {
// event handler attributes
attribute nsIDOMEventListener onabort;
attribute nsIDOMEventListener onerror;
attribute nsIDOMEventListener onload;
attribute nsIDOMEventListener onloadstart;
attribute nsIDOMEventListener onprogress;
};
[scriptable, uuid(09ff3682-7759-4441-a765-f70e1a1fabcf)]
interface nsIXMLHttpRequestUpload : nsIXMLHttpRequestEventTarget {
// for future use
};
/**
* Mozilla's XMLHttpRequest is modelled after Microsoft's IXMLHttpRequest
* object. The goal has been to make Mozilla's version match Microsoft's
* version as closely as possible, but there are bound to be some differences.
*
* In general, Microsoft's documentation for IXMLHttpRequest can be used.
* Mozilla's interface definitions provide some additional documentation. The
* web page to look at is http://www.mozilla.org/xmlextras/
*
* Mozilla's XMLHttpRequest object can be created in JavaScript like this:
* new XMLHttpRequest()
* compare to Internet Explorer:
* new ActiveXObject("Msxml2.XMLHTTP")
*
* From JavaScript, the methods and properties visible in the XMLHttpRequest
* object are a combination of nsIXMLHttpRequest and nsIJSXMLHttpRequest;
* there is no need to differentiate between those interfaces.
*
* From native code, the way to set up onload and onerror handlers is a bit
* different. Here is a comment from Johnny Stenback <jst@netscape.com>:
*
* The mozilla implementation of nsIXMLHttpRequest implements the interface
* nsIDOMEventTarget and that's how you're supported to add event listeners.
* Try something like this:
*
* nsCOMPtr<nsIDOMEventTarget> target(do_QueryInterface(myxmlhttpreq));
*
* target->AddEventListener(NS_LITERAL_STRING("load"), mylistener,
* PR_FALSE)
*
* where mylistener is your event listener object that implements the
* interface nsIDOMEventListener.
*
* The 'onload', 'onerror', and 'onreadystatechange' attributes moved to
* nsIJSXMLHttpRequest, but if you're coding in C++ you should avoid using
* those.
*
* Conclusion: Do not use event listeners on XMLHttpRequest from C++, unless
* you're aware of all the security implications. And then think twice about
* it.
*/
[scriptable, uuid(6bb91106-85f0-4d93-8cb4-e57b3d0624f2)]
interface nsIXMLHttpRequest : nsISupports
{
/**
* The request uses a channel in order to perform the
* request. This attribute represents the channel used
* for the request. NULL if the channel has not yet been
* created.
*
* In a multipart request case, this is the initial channel, not the
* different parts in the multipart request.
*
* Mozilla only. Requires elevated privileges to access.
*/
readonly attribute nsIChannel channel;
/**
* The response to the request is parsed as if it were a
* text/xml stream. This attributes represents the response as
* a DOM Document object. NULL if the request is unsuccessful or
* has not yet been sent.
*/
readonly attribute nsIDOMDocument responseXML;
/**
* The response to the request as text.
* NULL if the request is unsuccessful or
* has not yet been sent.
*/
readonly attribute AString responseText;
/**
* The status of the response to the request for HTTP requests.
*/
readonly attribute unsigned long status;
/**
* The string representing the status of the response for
* HTTP requests.
*/
readonly attribute AUTF8String statusText;
/**
* If the request has been sent already, this method will
* abort the request.
*/
void abort();
/**
* Returns all of the response headers as a string for HTTP
* requests.
*
* Note that this will return all the headers from the *current*
* part of a multipart request, not from the original channel.
*
* @returns A string containing all of the response headers.
* NULL if the response has not yet been received.
*/
string getAllResponseHeaders();
/**
* Returns the text of the header with the specified name for
* HTTP requests.
*
* @param header The name of the header to retrieve
* @returns A string containing the text of the header specified.
* NULL if the response has not yet been received or the
* header does not exist in the response.
*/
ACString getResponseHeader(in AUTF8String header);
/**
* Native (non-script) method to initialize a request. Note that
* the request is not sent until the <code>send</code> method
* is invoked.
*
* If there is an "active" request (that is, if open() or openRequest() has
* been called already), this is equivalent to calling abort().
*
* @param method The HTTP method, for example "POST" or "GET". Ignored
* if the URL is not a HTTP(S) URL.
* @param url The URL to which to send the request.
* @param async Whether the request is synchronous or asynchronous
* i.e. whether send returns only after the response
* is received or if it returns immediately after
* sending the request. In the latter case, notification
* of completion is sent through the event listeners.
* This argument must be true if the multipart
* attribute has been set to true, or an exception will
* be thrown.
* @param user A username for authentication if necessary.
* @param password A password for authentication if necessary.
*/
[noscript] void openRequest(in AUTF8String method,
in AUTF8String url,
in boolean async,
in AString user,
in AString password);
/**
* Meant to be a script-only method for initializing a request.
* The parameters are similar to the ones detailed in the
* description of <code>openRequest</code>, but the last
* 3 are optional.
*
* If there is an "active" request (that is, if open() or openRequest() has
* been called already), this is equivalent to calling abort().
*
* @param method The HTTP method - either "POST" or "GET". Ignored
* if the URL is not a HTTP URL.
* @param url The URL to which to send the request.
* @param async (optional) Whether the request is synchronous or
* asynchronous i.e. whether send returns only after
* the response is received or if it returns immediately after
* sending the request. In the latter case, notification
* of completion is sent through the event listeners.
* The default value is true.
* This argument must be true if the multipart
* attribute has been set to true, or an exception will
* be thrown.
* @param user (optional) A username for authentication if necessary.
* The default value is the empty string
* @param password (optional) A password for authentication if necessary.
* The default value is the empty string
*/
[optional_argc] void open(in AUTF8String method, in AUTF8String url,
[optional] in boolean async,
[optional] in DOMString user,
[optional] in DOMString password);
/**
* Sends the request. If the request is asynchronous, returns
* immediately after sending the request. If it is synchronous
* returns only after the response has been received.
*
* All event listeners must be set before calling send().
*
* After the initial response, all event listeners will be cleared.
* // XXXbz what does that mean, exactly?
*
* @param body Either an instance of nsIDOMDocument, nsIInputStream
* or a string (nsISupportsString in the native calling
* case). This is used to populate the body of the
* HTTP request if the HTTP request method is "POST".
* If the parameter is a nsIDOMDocument, it is serialized.
* If the parameter is a nsIInputStream, then it must be
* compatible with nsIUploadChannel.setUploadStream, and a
* Content-Length header will be added to the HTTP request
* with a value given by nsIInputStream.available. Any
* headers included at the top of the stream will be
* treated as part of the message body. The MIME type of
* the stream should be specified by setting the Content-
* Type header via the setRequestHeader method before
* calling send.
*/
void send([optional] in nsIVariant body);
/**
* A variant of the send() method used to send binary data.
*
* @param body The request body as a DOM string. The string data will be
* converted to a single-byte string by truncation (i.e., the
* high-order byte of each character will be discarded).
*/
void sendAsBinary(in DOMString body);
/**
* Sets a HTTP request header for HTTP requests. You must call open
* before setting the request headers.
*
* @param header The name of the header to set in the request.
* @param value The body of the header.
*/
void setRequestHeader(in AUTF8String header, in AUTF8String value);
/**
* The state of the request.
*
* Possible values:
* 0 UNINITIALIZED open() has not been called yet.
* 1 LOADING send() has not been called yet.
* 2 LOADED send() has been called, headers and status are available.
* 3 INTERACTIVE Downloading, responseText holds the partial data.
* 4 COMPLETED Finished with all operations.
*/
readonly attribute long readyState;
/**
* Override the mime type returned by the server (if any). This may
* be used, for example, to force a stream to be treated and parsed
* as text/xml, even if the server does not report it as such. This
* must be done before the <code>send</code> method is invoked.
*
* @param mimetype The type used to override that returned by the server
* (if any).
*/
void overrideMimeType(in AUTF8String mimetype);
/**
* Set to true if the response is expected to be a stream of
* possibly multiple (XML) documents. If set to true, the content
* type of the initial response must be multipart/x-mixed-replace or
* an error will be triggerd. All requests must be asynchronous.
*
* This enables server push. For each XML document that's written to
* this request, a new XML DOM document is created and the onload
* handler is called inbetween documents. Note that when this is
* set, the onload handler and other event handlers are not reset
* after the first XML document is loaded, and the onload handler
* will be called as each part of the response is received.
*/
attribute boolean multipart;
/**
* Set to true if this is a background service request. This will
* prevent a load group being associated with the request, and
* suppress any security dialogs from being shown * to the user.
* In the cases where one of those dialogs would be shown, the request
* will simply fail instead.
*/
attribute boolean mozBackgroundRequest;
/**
* When set to true attempts to make cross-site Access-Control requests
* with credentials such as cookies and authorization headers.
*
* Never affects same-site requests.
*
* Defaults to false.
*/
attribute boolean withCredentials;
/**
* Initialize the object for use from C++ code with the principal, script
* context, and owner window that should be used.
*
* @param principal The principal to use for the request. This must not be
* null.
* @param scriptContext The script context to use for the request. May be
* null.
* @param ownerWindow The associated window for the request. May be null.
* @param baseURI The base URI to use when resolving relative URIs. May be
* null.
*/
[noscript] void init(in nsIPrincipal principal,
in nsIScriptContext scriptContext,
in nsPIDOMWindow ownerWindow,
in nsIURI baseURI);
/**
* Upload process can be tracked by adding event listener to |upload|.
*/
readonly attribute nsIXMLHttpRequestUpload upload;
/**
* Meant to be a script-only mechanism for setting a callback function.
* The attribute is expected to be JavaScript function object. When the
* readyState changes, the callback function will be called.
* This attribute should not be used from native code!!
*
* After the initial response, all event listeners will be cleared.
* // XXXbz what does that mean, exactly?
*
* Call open() before setting an onreadystatechange listener.
*/
attribute nsIDOMEventListener onreadystatechange;
};
[scriptable, uuid(840d0d00-e83e-4a29-b3c7-67e96e90a499)]
interface nsIXHRSendable : nsISupports {
void getSendInfo(out nsIInputStream body,
out ACString contentType,
out ACString charset);
};
/**
* DEPRECATED.
*/
[scriptable, uuid(423fdd3d-41c9-4149-8fe5-b14a1d3912a0)]
interface nsIJSXMLHttpRequest : nsISupports {
/**
* Meant to be a script-only mechanism for setting an upload progress event
* listener.
* This attribute should not be used from native code!!
* This event listener may be called multiple times during the upload..
*
* After the initial response, all event listeners will be cleared.
* // XXXbz what does that mean, exactly?
*
* This event listener must be set BEFORE calling open().
*
* Mozilla only.
*/
attribute nsIDOMEventListener onuploadprogress;
};
%{ C++
#define NS_XMLHTTPREQUEST_CID \
{ /* d164e770-4157-11d4-9a42-000064657374 */ \
0xd164e770, 0x4157, 0x11d4, \
{0x9a, 0x42, 0x00, 0x00, 0x64, 0x65, 0x73, 0x74} }
#define NS_XMLHTTPREQUEST_CONTRACTID \
"@mozilla.org/xmlextras/xmlhttprequest;1"
%}