gecko/js/src/nanojit/Nativei386.h

858 lines
31 KiB
C++

/* -*- Mode: C++; c-basic-offset: 4; indent-tabs-mode: t; tab-width: 4 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is [Open Source Virtual Machine].
*
* The Initial Developer of the Original Code is
* Adobe System Incorporated.
* Portions created by the Initial Developer are Copyright (C) 2004-2007
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Adobe AS3 Team
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#ifndef __nanojit_Nativei386__
#define __nanojit_Nativei386__
#ifdef PERFM
#include "../vprof/vprof.h"
#define count_instr() _nvprof("x86",1)
#define count_ret() _nvprof("x86-ret",1); count_instr();
#define count_push() _nvprof("x86-push",1); count_instr();
#define count_pop() _nvprof("x86-pop",1); count_instr();
#define count_st() _nvprof("x86-st",1); count_instr();
#define count_stq() _nvprof("x86-stq",1); count_instr();
#define count_ld() _nvprof("x86-ld",1); count_instr();
#define count_ldq() _nvprof("x86-ldq",1); count_instr();
#define count_call() _nvprof("x86-call",1); count_instr();
#define count_calli() _nvprof("x86-calli",1); count_instr();
#define count_prolog() _nvprof("x86-prolog",1); count_instr();
#define count_alu() _nvprof("x86-alu",1); count_instr();
#define count_mov() _nvprof("x86-mov",1); count_instr();
#define count_fpu() _nvprof("x86-fpu",1); count_instr();
#define count_jmp() _nvprof("x86-jmp",1); count_instr();
#define count_jcc() _nvprof("x86-jcc",1); count_instr();
#define count_fpuld() _nvprof("x86-ldq",1); _nvprof("x86-fpu",1); count_instr()
#define count_aluld() _nvprof("x86-ld",1); _nvprof("x86-alu",1); count_instr()
#define count_alust() _nvprof("x86-ld",1); _nvprof("x86-alu",1); _nvprof("x86-st",1); count_instr()
#define count_pushld() _nvprof("x86-ld",1); _nvprof("x86-push",1); count_instr()
#define count_imt() _nvprof("x86-imt",1) count_instr()
#else
#define count_instr()
#define count_ret()
#define count_push()
#define count_pop()
#define count_st()
#define count_stq()
#define count_ld()
#define count_ldq()
#define count_call()
#define count_calli()
#define count_prolog()
#define count_alu()
#define count_mov()
#define count_fpu()
#define count_jmp()
#define count_jcc()
#define count_fpuld()
#define count_aluld()
#define count_alust()
#define count_pushld()
#define count_imt()
#endif
namespace nanojit
{
const int NJ_LOG2_PAGE_SIZE = 12; // 4K
const int NJ_MAX_REGISTERS = 24; // gpregs, x87 regs, xmm regs
const int NJ_STACK_OFFSET = 0;
#define NJ_MAX_STACK_ENTRY 256
#define NJ_MAX_PARAMETERS 1
// Preserve a 16-byte stack alignment, to support the use of
// SSE instructions like MOVDQA (if not by Tamarin itself,
// then by the C functions it calls).
const int NJ_ALIGN_STACK = 16;
const int32_t LARGEST_UNDERRUN_PROT = 3200; // largest value passed to underrunProtect
typedef uint8_t NIns;
// These are used as register numbers in various parts of the code
typedef enum
{
// general purpose 32bit regs
EAX = 0, // return value, scratch
ECX = 1, // this/arg0, scratch
EDX = 2, // arg1, return-msw, scratch
EBX = 3,
ESP = 4, // stack pointer
EBP = 5, // frame pointer
ESI = 6,
EDI = 7,
SP = ESP, // alias SP to ESP for convenience
FP = EBP, // alias FP to EBP for convenience
// SSE regs come before X87 so we prefer them
XMM0 = 8,
XMM1 = 9,
XMM2 = 10,
XMM3 = 11,
XMM4 = 12,
XMM5 = 13,
XMM6 = 14,
XMM7 = 15,
// X87 regs
FST0 = 16,
FST1 = 17,
FST2 = 18,
FST3 = 19,
FST4 = 20,
FST5 = 21,
FST6 = 22,
FST7 = 23,
FirstReg = 0,
LastReg = 23,
UnknownReg = 24
}
Register;
typedef int RegisterMask;
static const int NumSavedRegs = 3;
static const RegisterMask SavedRegs = 1<<EBX | 1<<EDI | 1<<ESI;
static const RegisterMask GpRegs = SavedRegs | 1<<EAX | 1<<ECX | 1<<EDX;
static const RegisterMask XmmRegs = 1<<XMM0|1<<XMM1|1<<XMM2|1<<XMM3|1<<XMM4|1<<XMM5|1<<XMM6|1<<XMM7;
static const RegisterMask x87Regs = 1<<FST0;
static const RegisterMask FpRegs = x87Regs | XmmRegs;
static const RegisterMask ScratchRegs = 1<<EAX | 1<<ECX | 1<<EDX | FpRegs;
static const RegisterMask AllowableFlagRegs = 1<<EAX |1<<ECX | 1<<EDX | 1<<EBX;
#define _rmask_(r) (1<<(r))
#define _is_xmm_reg_(r) ((_rmask_(r)&XmmRegs)!=0)
#define _is_x87_reg_(r) ((_rmask_(r)&x87Regs)!=0)
#define _is_fp_reg_(r) ((_rmask_(r)&FpRegs)!=0)
#define _is_gp_reg_(r) ((_rmask_(r)&GpRegs)!=0)
#define nextreg(r) Register(r+1)
#define prevreg(r) Register(r-1)
verbose_only( extern const char* regNames[]; )
#define DECLARE_PLATFORM_STATS()
#define DECLARE_PLATFORM_REGALLOC()
#define DECLARE_PLATFORM_ASSEMBLER() \
const static Register argRegs[2], retRegs[2]; \
bool x87Dirty; \
bool pad[3];\
void nativePageReset();\
void nativePageSetup();\
void underrunProtect(int);\
void asm_farg(LInsp);
#define swapptrs() { NIns* _tins = _nIns; _nIns=_nExitIns; _nExitIns=_tins; }
#define IMM32(i) \
_nIns -= 4; \
*((int32_t*)_nIns) = (int32_t)(i)
#define MODRMs(r,d,b,l,i) \
NanoAssert(unsigned(r)<8 && unsigned(b)<8 && unsigned(i)<8); \
if ((d) == 0 && (b) != EBP) { \
_nIns -= 2; \
_nIns[0] = (uint8_t) ( 0<<6 | (r)<<3 | 4); \
_nIns[1] = (uint8_t) ((l)<<6 | (i)<<3 | (b)); \
} else if (isS8(d)) { \
_nIns -= 3; \
_nIns[0] = (uint8_t) ( 1<<6 | (r)<<3 | 4 ); \
_nIns[1] = (uint8_t) ( (l)<<6 | (i)<<3 | (b) ); \
_nIns[2] = (uint8_t) (d); \
} else { \
IMM32(d); \
*(--_nIns) = (uint8_t) ( (l)<<6 | (i)<<3 | (b) ); \
*(--_nIns) = (uint8_t) ( 2<<6 | (r)<<3 | 4 ); \
}
#define MODRMm(r,d,b) \
NanoAssert(unsigned(r)<8 && ((b)==UnknownReg || unsigned(b)<8)); \
if ((b) == UnknownReg) {\
IMM32(d);\
*(--_nIns) = (uint8_t) (0<<6 | (r)<<3 | 5);\
} else if ((b) == ESP) { \
MODRMs(r, d, b, 0, (Register)4); \
} \
else if ( (d) == 0 && (b) != EBP) { \
*(--_nIns) = (uint8_t) ( 0<<6 | (r)<<3 | (b) ); \
} else if (isS8(d)) { \
*(--_nIns) = (uint8_t) (d); \
*(--_nIns) = (uint8_t) ( 1<<6 | (r)<<3 | (b) ); \
} else { \
IMM32(d); \
*(--_nIns) = (uint8_t) ( 2<<6 | (r)<<3 | (b) ); \
}
#define MODRMSIB(reg,base,index,scale,disp) \
if (disp != 0 || base == EBP) { \
if (isS8(disp)) { \
*(--_nIns) = int8_t(disp); \
} else { \
IMM32(disp); \
} \
} \
*(--_nIns) = uint8_t((scale)<<6|(index)<<3|(base)); \
if (disp == 0 && base != EBP) { \
*(--_nIns) = uint8_t(((reg)<<3)|4); \
} else { \
if (isS8(disp)) \
*(--_nIns) = uint8_t((1<<6)|(reg<<3)|4); \
else \
*(--_nIns) = uint8_t((2<<6)|(reg<<3)|4); \
}
#define MODRMdm(r,addr) \
NanoAssert(unsigned(r)<8); \
IMM32(addr); \
*(--_nIns) = (uint8_t)( (r)<<3 | 5 );
#define MODRM(d,s) \
NanoAssert(((unsigned)(d))<8 && ((unsigned)(s))<8); \
*(--_nIns) = (uint8_t) ( 3<<6|(d)<<3|(s) )
#define ALU0(o) \
underrunProtect(1);\
*(--_nIns) = (uint8_t) (o)
#define ALUm(c,r,d,b) \
underrunProtect(8); \
MODRMm(r,d,b); \
*(--_nIns) = uint8_t(c)
#define ALUdm(c,r,addr) \
underrunProtect(6); \
MODRMdm(r,addr); \
*(--_nIns) = uint8_t(c)
#define ALUsib(c,r,base,index,scale,disp) \
underrunProtect(7); \
MODRMSIB(r,base,index,scale,disp); \
*(--_nIns) = uint8_t(c)
#define ALUm16(c,r,d,b) \
underrunProtect(9); \
MODRMm(r,d,b); \
*(--_nIns) = uint8_t(c);\
*(--_nIns) = 0x66
#define ALU2dm(c,r,addr) \
underrunProtect(7); \
MODRMdm(r,addr); \
*(--_nIns) = (uint8_t) (c);\
*(--_nIns) = (uint8_t) ((c)>>8)
#define ALU2m(c,r,d,b) \
underrunProtect(9); \
MODRMm(r,d,b); \
*(--_nIns) = (uint8_t) (c);\
*(--_nIns) = (uint8_t) ((c)>>8)
#define ALU2sib(c,r,base,index,scale,disp) \
underrunProtect(8); \
MODRMSIB(r,base,index,scale,disp); \
*(--_nIns) = (uint8_t) (c); \
*(--_nIns) = (uint8_t) ((c)>>8)
#define ALU(c,d,s) \
underrunProtect(2);\
MODRM(d,s); \
*(--_nIns) = (uint8_t) (c)
#define ALUi(c,r,i) \
underrunProtect(6); \
NanoAssert(unsigned(r)<8);\
if (isS8(i)) { \
*(--_nIns) = uint8_t(i); \
MODRM((c>>3),(r)); \
*(--_nIns) = uint8_t(0x83); \
} else { \
IMM32(i); \
if ( (r) == EAX) { \
*(--_nIns) = (uint8_t) (c); \
} else { \
MODRM((c>>3),(r)); \
*(--_nIns) = uint8_t(0x81); \
} \
}
#define ALUmi(c,d,b,i) \
underrunProtect(10); \
NanoAssert(((unsigned)b)<8); \
if (isS8(i)) { \
*(--_nIns) = uint8_t(i); \
MODRMm((c>>3),(d),(b)); \
*(--_nIns) = uint8_t(0x83); \
} else { \
IMM32(i); \
MODRMm((c>>3),(d),(b)); \
*(--_nIns) = uint8_t(0x81); \
}
#define ALU2(c,d,s) \
underrunProtect(3); \
MODRM((d),(s)); \
_nIns -= 2; \
_nIns[0] = (uint8_t) ( ((c)>>8) ); \
_nIns[1] = (uint8_t) ( (c) )
#define LAHF() do { count_alu(); ALU0(0x9F); asm_output("lahf"); } while(0)
#define SAHF() do { count_alu(); ALU0(0x9E); asm_output("sahf"); } while(0)
#define OR(l,r) do { count_alu(); ALU(0x0b, (l),(r)); asm_output("or %s,%s",gpn(l),gpn(r)); } while(0)
#define AND(l,r) do { count_alu(); ALU(0x23, (l),(r)); asm_output("and %s,%s",gpn(l),gpn(r)); } while(0)
#define XOR(l,r) do { count_alu(); ALU(0x33, (l),(r)); asm_output("xor %s,%s",gpn(l),gpn(r)); } while(0)
#define ADD(l,r) do { count_alu(); ALU(0x03, (l),(r)); asm_output("add %s,%s",gpn(l),gpn(r)); } while(0)
#define SUB(l,r) do { count_alu(); ALU(0x2b, (l),(r)); asm_output("sub %s,%s",gpn(l),gpn(r)); } while(0)
#define MUL(l,r) do { count_alu(); ALU2(0x0faf,(l),(r)); asm_output("mul %s,%s",gpn(l),gpn(r)); } while(0)
#define NOT(r) do { count_alu(); ALU(0xf7, (Register)2,(r)); asm_output("not %s",gpn(r)); } while(0)
#define NEG(r) do { count_alu(); ALU(0xf7, (Register)3,(r)); asm_output("neg %s",gpn(r)); } while(0)
#define SHR(r,s) do { count_alu(); ALU(0xd3, (Register)5,(r)); asm_output("shr %s,%s",gpn(r),gpn(s)); } while(0)
#define SAR(r,s) do { count_alu(); ALU(0xd3, (Register)7,(r)); asm_output("sar %s,%s",gpn(r),gpn(s)); } while(0)
#define SHL(r,s) do { count_alu(); ALU(0xd3, (Register)4,(r)); asm_output("shl %s,%s",gpn(r),gpn(s)); } while(0)
#define SHIFT(c,r,i) \
underrunProtect(3);\
*--_nIns = (uint8_t)(i);\
MODRM((Register)c,r);\
*--_nIns = 0xc1;
#define SHLi(r,i) do { count_alu(); SHIFT(4,r,i); asm_output("shl %s,%d", gpn(r),i); } while(0)
#define SHRi(r,i) do { count_alu(); SHIFT(5,r,i); asm_output("shr %s,%d", gpn(r),i); } while(0)
#define SARi(r,i) do { count_alu(); SHIFT(7,r,i); asm_output("sar %s,%d", gpn(r),i); } while(0)
#define MOVZX8(d,s) do { count_alu(); ALU2(0x0fb6,d,s); asm_output("movzx %s,%s", gpn(d),gpn(s)); } while(0)
#define SUBi(r,i) do { count_alu(); ALUi(0x2d,r,i); asm_output("sub %s,%d",gpn(r),i); } while(0)
#define ADDi(r,i) do { count_alu(); ALUi(0x05,r,i); asm_output("add %s,%d",gpn(r),i); } while(0)
#define ANDi(r,i) do { count_alu(); ALUi(0x25,r,i); asm_output("and %s,%d",gpn(r),i); } while(0)
#define ORi(r,i) do { count_alu(); ALUi(0x0d,r,i); asm_output("or %s,%d",gpn(r),i); } while(0)
#define XORi(r,i) do { count_alu(); ALUi(0x35,r,i); asm_output("xor %s,%d",gpn(r),i); } while(0)
#define ADDmi(d,b,i) do { count_alust(); ALUmi(0x05, d, b, i); asm_output("add %d(%s), %d", d, gpn(b), i); } while(0)
#define TEST(d,s) do { count_alu(); ALU(0x85,d,s); asm_output("test %s,%s",gpn(d),gpn(s)); } while(0)
#define CMP(l,r) do { count_alu(); ALU(0x3b, (l),(r)); asm_output("cmp %s,%s",gpn(l),gpn(r)); } while(0)
#define CMPi(r,i) do { count_alu(); ALUi(0x3d,r,i); asm_output("cmp %s,%d",gpn(r),i); } while(0)
#define MR(d,s) do { count_mov(); ALU(0x8b,d,s); asm_output("mov %s,%s",gpn(d),gpn(s)); } while(0)
#define LEA(r,d,b) do { count_alu(); ALUm(0x8d, r,d,b); asm_output("lea %s,%d(%s)",gpn(r),d,gpn(b)); } while(0)
// lea %r, d(%i*4)
// This addressing mode is not supported by the MODRMSIB macro.
#define LEAmi4(r,d,i) do { count_alu(); IMM32(d); *(--_nIns) = (2<<6)|(i<<3)|5; *(--_nIns) = (0<<6)|(r<<3)|4; *(--_nIns) = 0x8d; asm_output("lea %s, %p(%s*4)", gpn(r), (void*)d, gpn(i)); } while(0)
#define SETE(r) do { count_alu(); ALU2(0x0f94,(r),(r)); asm_output("sete %s",gpn(r)); } while(0)
#define SETNP(r) do { count_alu(); ALU2(0x0f9B,(r),(r)); asm_output("setnp %s",gpn(r)); } while(0)
#define SETL(r) do { count_alu(); ALU2(0x0f9C,(r),(r)); asm_output("setl %s",gpn(r)); } while(0)
#define SETLE(r) do { count_alu(); ALU2(0x0f9E,(r),(r)); asm_output("setle %s",gpn(r)); } while(0)
#define SETG(r) do { count_alu(); ALU2(0x0f9F,(r),(r)); asm_output("setg %s",gpn(r)); } while(0)
#define SETGE(r) do { count_alu(); ALU2(0x0f9D,(r),(r)); asm_output("setge %s",gpn(r)); } while(0)
#define SETB(r) do { count_alu(); ALU2(0x0f92,(r),(r)); asm_output("setb %s",gpn(r)); } while(0)
#define SETBE(r) do { count_alu(); ALU2(0x0f96,(r),(r)); asm_output("setbe %s",gpn(r)); } while(0)
#define SETA(r) do { count_alu(); ALU2(0x0f97,(r),(r)); asm_output("seta %s",gpn(r)); } while(0)
#define SETAE(r) do { count_alu(); ALU2(0x0f93,(r),(r)); asm_output("setae %s",gpn(r)); } while(0)
#define SETC(r) do { count_alu(); ALU2(0x0f90,(r),(r)); asm_output("setc %s",gpn(r)); } while(0)
#define SETO(r) do { count_alu(); ALU2(0x0f92,(r),(r)); asm_output("seto %s",gpn(r)); } while(0)
#define MREQ(dr,sr) do { count_alu(); ALU2(0x0f44,dr,sr); asm_output("cmove %s,%s", gpn(dr),gpn(sr)); } while(0)
#define MRNE(dr,sr) do { count_alu(); ALU2(0x0f45,dr,sr); asm_output("cmovne %s,%s", gpn(dr),gpn(sr)); } while(0)
#define MRL(dr,sr) do { count_alu(); ALU2(0x0f4C,dr,sr); asm_output("cmovl %s,%s", gpn(dr),gpn(sr)); } while(0)
#define MRLE(dr,sr) do { count_alu(); ALU2(0x0f4E,dr,sr); asm_output("cmovle %s,%s", gpn(dr),gpn(sr)); } while(0)
#define MRG(dr,sr) do { count_alu(); ALU2(0x0f4F,dr,sr); asm_output("cmovg %s,%s", gpn(dr),gpn(sr)); } while(0)
#define MRGE(dr,sr) do { count_alu(); ALU2(0x0f4D,dr,sr); asm_output("cmovge %s,%s", gpn(dr),gpn(sr)); } while(0)
#define MRB(dr,sr) do { count_alu(); ALU2(0x0f42,dr,sr); asm_output("cmovb %s,%s", gpn(dr),gpn(sr)); } while(0)
#define MRBE(dr,sr) do { count_alu(); ALU2(0x0f46,dr,sr); asm_output("cmovbe %s,%s", gpn(dr),gpn(sr)); } while(0)
#define MRA(dr,sr) do { count_alu(); ALU2(0x0f47,dr,sr); asm_output("cmova %s,%s", gpn(dr),gpn(sr)); } while(0)
#define MRNC(dr,sr) do { count_alu(); ALU2(0x0f43,dr,sr); asm_output("cmovnc %s,%s", gpn(dr),gpn(sr)); } while(0)
#define MRAE(dr,sr) do { count_alu(); ALU2(0x0f43,dr,sr); asm_output("cmovae %s,%s", gpn(dr),gpn(sr)); } while(0)
#define MRNO(dr,sr) do { count_alu(); ALU2(0x0f41,dr,sr); asm_output("cmovno %s,%s", gpn(dr),gpn(sr)); } while(0)
// these aren't currently used but left in for reference
//#define LDEQ(r,d,b) do { ALU2m(0x0f44,r,d,b); asm_output("cmove %s,%d(%s)", gpn(r),d,gpn(b)); } while(0)
//#define LDNEQ(r,d,b) do { ALU2m(0x0f45,r,d,b); asm_output("cmovne %s,%d(%s)", gpn(r),d,gpn(b)); } while(0)
#define LD(reg,disp,base) do { \
count_ld();\
ALUm(0x8b,reg,disp,base); \
asm_output("mov %s,%d(%s)",gpn(reg),disp,gpn(base)); } while(0)
#define LDdm(reg,addr) do { \
count_ld(); \
ALUdm(0x8b,reg,addr); \
asm_output("mov %s,0(%lx)",gpn(reg),(unsigned long)addr); \
} while (0)
#define SIBIDX(n) "1248"[n]
#define LDsib(reg,disp,base,index,scale) do { \
count_ld(); \
ALUsib(0x8b,reg,base,index,scale,disp); \
asm_output("mov %s,%d(%s+%s*%c)",gpn(reg),disp,gpn(base),gpn(index),SIBIDX(scale)); \
} while (0)
// load 16-bit, sign extend
#define LD16S(r,d,b) do { count_ld(); ALU2m(0x0fbf,r,d,b); asm_output("movsx %s,%d(%s)", gpn(r),d,gpn(b)); } while(0)
// load 16-bit, zero extend
#define LD16Z(r,d,b) do { count_ld(); ALU2m(0x0fb7,r,d,b); asm_output("movsz %s,%d(%s)", gpn(r),d,gpn(b)); } while(0)
#define LD16Zdm(r,addr) do { count_ld(); ALU2dm(0x0fb7,r,addr); asm_output("movsz %s,0(%lx)", gpn(r),(unsigned long)addr); } while (0)
#define LD16Zsib(r,disp,base,index,scale) do { \
count_ld(); \
ALU2sib(0x0fb7,r,base,index,scale,disp); \
asm_output("movsz %s,%d(%s+%s*%c)",gpn(r),disp,gpn(base),gpn(index),SIBIDX(scale)); \
} while (0)
// load 8-bit, zero extend
// note, only 5-bit offsets (!) are supported for this, but that's all we need at the moment
// (movzx actually allows larger offsets mode but 5-bit gives us advantage in Thumb mode)
#define LD8Z(r,d,b) do { NanoAssert((d)>=0&&(d)<=31); ALU2m(0x0fb6,r,d,b); asm_output("movzx %s,%d(%s)", gpn(r),d,gpn(b)); } while(0)
#define LD8Zdm(r,addr) do { \
count_ld(); \
NanoAssert((d)>=0&&(d)<=31); \
ALU2dm(0x0fb6,r,addr); \
asm_output("movzx %s,0(%lx)", gpn(r),(long unsigned)addr); \
} while(0)
#define LD8Zsib(r,disp,base,index,scale) do { \
count_ld(); \
NanoAssert((d)>=0&&(d)<=31); \
ALU2sib(0x0fb6,r,base,index,scale,disp); \
asm_output("movzx %s,%d(%s+%s*%c)",gpn(r),disp,gpn(base),gpn(index),SIBIDX(scale)); \
} while(0)
#define LDi(r,i) do { \
count_ld();\
underrunProtect(5); \
IMM32(i); \
NanoAssert(((unsigned)r)<8); \
*(--_nIns) = (uint8_t) (0xb8 | (r) ); \
asm_output("mov %s,%d",gpn(r),i); } while(0)
#define ST(base,disp,reg) do { \
count_st();\
ALUm(0x89,reg,disp,base); \
asm_output("mov %d(%s),%s",disp,base==UnknownReg?"0":gpn(base),gpn(reg)); } while(0)
#define STi(base,disp,imm) do { \
count_st();\
underrunProtect(12); \
IMM32(imm); \
MODRMm(0, disp, base); \
*(--_nIns) = 0xc7; \
asm_output("mov %d(%s),%d",disp,gpn(base),imm); } while(0)
#define RET() do { count_ret(); ALU0(0xc3); asm_output("ret"); } while(0)
#define NOP() do { count_alu(); ALU0(0x90); asm_output("nop"); } while(0)
#define INT3() do { ALU0(0xcc); asm_output("int3"); } while(0)
#define PUSHi(i) do { \
count_push();\
if (isS8(i)) { \
underrunProtect(2); \
_nIns-=2; _nIns[0] = 0x6a; _nIns[1] = (uint8_t)(i); \
asm_output("push %d",i); \
} else \
{ PUSHi32(i); } } while(0)
#define PUSHi32(i) do { \
count_push();\
underrunProtect(5); \
IMM32(i); \
*(--_nIns) = 0x68; \
asm_output("push %d",i); } while(0)
#define PUSHr(r) do { \
count_push();\
underrunProtect(1); \
NanoAssert(((unsigned)r)<8); \
*(--_nIns) = (uint8_t) ( 0x50 | (r) ); \
asm_output("push %s",gpn(r)); } while(0)
#define PUSHm(d,b) do { \
count_pushld();\
ALUm(0xff, 6, d, b); \
asm_output("push %d(%s)",d,gpn(b)); } while(0)
#define POPr(r) do { \
count_pop();\
underrunProtect(1); \
NanoAssert(((unsigned)r)<8); \
*(--_nIns) = (uint8_t) ( 0x58 | (r) ); \
asm_output("pop %s",gpn(r)); } while(0)
#define JCC32 0x0f
#define JMP8 0xeb
#define JMP32 0xe9
#define JCC(o,t,isfar,n) do { \
count_jcc();\
underrunProtect(6); \
intptr_t tt = (intptr_t)t - (intptr_t)_nIns; \
if (isS8(tt) && !isfar) { \
verbose_only( NIns* next = _nIns; (void)next; ) \
_nIns -= 2; \
_nIns[0] = (uint8_t) ( 0x70 | (o) ); \
_nIns[1] = (uint8_t) (tt); \
asm_output("%s %p",(n),(next+tt)); \
} else { \
verbose_only( NIns* next = _nIns; ) \
IMM32(tt); \
_nIns -= 2; \
_nIns[0] = JCC32; \
_nIns[1] = (uint8_t) ( 0x80 | (o) ); \
asm_output("%s %p",(n),(next+tt)); \
} } while(0)
#define JMP_long(t) do { \
count_jmp();\
underrunProtect(5); \
intptr_t tt = (intptr_t)t - (intptr_t)_nIns; \
JMP_long_nochk_offset(tt); \
verbose_only( verbose_outputf(" %p:",_nIns); ) \
} while(0)
#define JMP(t) do { \
count_jmp();\
underrunProtect(5); \
intptr_t tt = (intptr_t)t - (intptr_t)_nIns; \
if (isS8(tt)) { \
verbose_only( NIns* next = _nIns; (void)next; ) \
_nIns -= 2; \
_nIns[0] = JMP8; \
_nIns[1] = (uint8_t) ( (tt)&0xff ); \
asm_output("jmp %p",(next+tt)); \
} else { \
JMP_long_nochk_offset(tt); \
} } while(0)
// this should only be used when you can guarantee there is enough room on the page
#define JMP_long_nochk_offset(o) do {\
verbose_only( NIns* next = _nIns; (void)next; ) \
IMM32((o)); \
*(--_nIns) = JMP32; \
asm_output("jmp %p",(next+(o))); } while(0)
#define JMP_indirect(r) do { \
underrunProtect(2); \
MODRMm(4, 0, r); \
*(--_nIns) = 0xff; \
asm_output("jmp *(%s)", gpn(r)); } while (0)
#define JE(t, isfar) JCC(0x04, t, isfar, "je")
#define JNE(t, isfar) JCC(0x05, t, isfar, "jne")
#define JP(t, isfar) JCC(0x0A, t, isfar, "jp")
#define JNP(t, isfar) JCC(0x0B, t, isfar, "jnp")
#define JB(t, isfar) JCC(0x02, t, isfar, "jb")
#define JNB(t, isfar) JCC(0x03, t, isfar, "jnb")
#define JBE(t, isfar) JCC(0x06, t, isfar, "jbe")
#define JNBE(t, isfar) JCC(0x07, t, isfar, "jnbe")
#define JA(t, isfar) JCC(0x07, t, isfar, "ja")
#define JNA(t, isfar) JCC(0x06, t, isfar, "jna")
#define JAE(t, isfar) JCC(0x03, t, isfar, "jae")
#define JNAE(t, isfar) JCC(0x02, t, isfar, "jnae")
#define JL(t, isfar) JCC(0x0C, t, isfar, "jl")
#define JNL(t, isfar) JCC(0x0D, t, isfar, "jnl")
#define JLE(t, isfar) JCC(0x0E, t, isfar, "jle")
#define JNLE(t, isfar) JCC(0x0F, t, isfar, "jnle")
#define JG(t, isfar) JCC(0x0F, t, isfar, "jg")
#define JNG(t, isfar) JCC(0x0E, t, isfar, "jng")
#define JGE(t, isfar) JCC(0x0D, t, isfar, "jge")
#define JNGE(t, isfar) JCC(0x0C, t, isfar, "jnge")
#define JC(t, isfar) JCC(0x02, t, isfar, "jc")
#define JNC(t, isfar) JCC(0x03, t, isfar, "jnc")
#define JO(t, isfar) JCC(0x00, t, isfar, "jo")
#define JNO(t, isfar) JCC(0x01, t, isfar, "jno")
// sse instructions
#define SSE(c,d,s) \
underrunProtect(9); \
MODRM((d),(s)); \
_nIns -= 3; \
_nIns[0] = (uint8_t)(((c)>>16)&0xff); \
_nIns[1] = (uint8_t)(((c)>>8)&0xff); \
_nIns[2] = (uint8_t)((c)&0xff)
#define SSEm(c,r,d,b) \
underrunProtect(9); \
MODRMm((r),(d),(b)); \
_nIns -= 3; \
_nIns[0] = (uint8_t)(((c)>>16)&0xff); \
_nIns[1] = (uint8_t)(((c)>>8)&0xff); \
_nIns[2] = (uint8_t)((c)&0xff)
#define LDSD(r,d,b)do { \
count_ldq();\
SSEm(0xf20f10, (r)&7, (d), (b)); \
asm_output("movsd %s,%d(%s)",gpn(r),(d),gpn(b)); \
} while(0)
#define LDSDm(r,addr)do { \
count_ldq();\
underrunProtect(8); \
const double* daddr = addr; \
IMM32(int32_t(daddr));\
*(--_nIns) = uint8_t(((r)&7)<<3|5); \
*(--_nIns) = 0x10;\
*(--_nIns) = 0x0f;\
*(--_nIns) = 0xf2;\
asm_output("movsd %s,(#%p) // =%f",gpn(r),(void*)daddr,*daddr); \
} while(0)
#define STSD(d,b,r)do { \
count_stq();\
SSEm(0xf20f11, (r)&7, (d), (b)); \
asm_output("movsd %d(%s),%s",(d),gpn(b),gpn(r)); \
} while(0)
#define SSE_LDQ(r,d,b)do { \
count_ldq();\
SSEm(0xf30f7e, (r)&7, (d), (b)); \
asm_output("movq %s,%d(%s)",gpn(r),d,gpn(b)); \
} while(0)
#define SSE_STQ(d,b,r)do { \
count_stq();\
SSEm(0x660fd6, (r)&7, (d), (b)); \
asm_output("movq %d(%s),%s",(d),gpn(b),gpn(r)); \
} while(0)
#define SSE_CVTSI2SD(xr,gr) do{ \
count_fpu();\
SSE(0xf20f2a, (xr)&7, (gr)&7); \
asm_output("cvtsi2sd %s,%s",gpn(xr),gpn(gr)); \
} while(0)
#define CVTDQ2PD(dstr,srcr) do{ \
count_fpu();\
SSE(0xf30fe6, (dstr)&7, (srcr)&7); \
asm_output("cvtdq2pd %s,%s",gpn(dstr),gpn(srcr)); \
} while(0)
// move and zero-extend gpreg to xmm reg
#define SSE_MOVD(d,s) do{ \
count_mov();\
if (_is_xmm_reg_(s)) { \
NanoAssert(_is_gp_reg_(d)); \
SSE(0x660f7e, (s)&7, (d)&7); \
} else { \
NanoAssert(_is_gp_reg_(s)); \
NanoAssert(_is_xmm_reg_(d)); \
SSE(0x660f6e, (d)&7, (s)&7); \
} \
asm_output("movd %s,%s",gpn(d),gpn(s)); \
} while(0)
#define SSE_MOVSD(rd,rs) do{ \
count_mov();\
NanoAssert(_is_xmm_reg_(rd) && _is_xmm_reg_(rs));\
SSE(0xf20f10, (rd)&7, (rs)&7); \
asm_output("movsd %s,%s",gpn(rd),gpn(rs)); \
} while(0)
#define SSE_MOVDm(d,b,xrs) do {\
count_st();\
NanoAssert(_is_xmm_reg_(xrs) && _is_gp_reg_(b));\
SSEm(0x660f7e, (xrs)&7, d, b);\
asm_output("movd %d(%s),%s", d, gpn(b), gpn(xrs));\
} while(0)
#define SSE_ADDSD(rd,rs) do{ \
count_fpu();\
NanoAssert(_is_xmm_reg_(rd) && _is_xmm_reg_(rs));\
SSE(0xf20f58, (rd)&7, (rs)&7); \
asm_output("addsd %s,%s",gpn(rd),gpn(rs)); \
} while(0)
#define SSE_ADDSDm(r,addr)do { \
count_fpuld();\
underrunProtect(8); \
NanoAssert(_is_xmm_reg_(r));\
const double* daddr = addr; \
IMM32(int32_t(daddr));\
*(--_nIns) = uint8_t(((r)&7)<<3|5); \
*(--_nIns) = 0x58;\
*(--_nIns) = 0x0f;\
*(--_nIns) = 0xf2;\
asm_output("addsd %s,%p // =%f",gpn(r),(void*)daddr,*daddr); \
} while(0)
#define SSE_SUBSD(rd,rs) do{ \
count_fpu();\
NanoAssert(_is_xmm_reg_(rd) && _is_xmm_reg_(rs));\
SSE(0xf20f5c, (rd)&7, (rs)&7); \
asm_output("subsd %s,%s",gpn(rd),gpn(rs)); \
} while(0)
#define SSE_MULSD(rd,rs) do{ \
count_fpu();\
NanoAssert(_is_xmm_reg_(rd) && _is_xmm_reg_(rs));\
SSE(0xf20f59, (rd)&7, (rs)&7); \
asm_output("mulsd %s,%s",gpn(rd),gpn(rs)); \
} while(0)
#define SSE_DIVSD(rd,rs) do{ \
count_fpu();\
NanoAssert(_is_xmm_reg_(rd) && _is_xmm_reg_(rs));\
SSE(0xf20f5e, (rd)&7, (rs)&7); \
asm_output("divsd %s,%s",gpn(rd),gpn(rs)); \
} while(0)
#define SSE_UCOMISD(rl,rr) do{ \
count_fpu();\
NanoAssert(_is_xmm_reg_(rl) && _is_xmm_reg_(rr));\
SSE(0x660f2e, (rl)&7, (rr)&7); \
asm_output("ucomisd %s,%s",gpn(rl),gpn(rr)); \
} while(0)
#define CVTSI2SDm(xr,d,b) do{ \
count_fpu();\
NanoAssert(_is_xmm_reg_(xr) && _is_gp_reg_(b));\
SSEm(0xf20f2a, (xr)&7, (d), (b)); \
asm_output("cvtsi2sd %s,%d(%s)",gpn(xr),(d),gpn(b)); \
} while(0)
#define SSE_XORPD(r, maskaddr) do {\
count_fpuld();\
underrunProtect(8); \
IMM32(maskaddr);\
*(--_nIns) = uint8_t(((r)&7)<<3|5); \
*(--_nIns) = 0x57;\
*(--_nIns) = 0x0f;\
*(--_nIns) = 0x66;\
asm_output("xorpd %s,[0x%p]",gpn(r),(void*)(maskaddr));\
} while(0)
#define SSE_XORPDr(rd,rs) do{ \
count_fpu();\
SSE(0x660f57, (rd)&7, (rs)&7); \
asm_output("xorpd %s,%s",gpn(rd),gpn(rs)); \
} while(0)
// floating point unit
#define FPUc(o) \
underrunProtect(2); \
*(--_nIns) = ((uint8_t)(o)&0xff); \
*(--_nIns) = (uint8_t)(((o)>>8)&0xff)
#define FPU(o,r) \
underrunProtect(2); \
*(--_nIns) = uint8_t(((uint8_t)(o)&0xff) | (r&7));\
*(--_nIns) = (uint8_t)(((o)>>8)&0xff)
#define FPUm(o,d,b) \
underrunProtect(7); \
MODRMm((uint8_t)(o), d, b); \
*(--_nIns) = (uint8_t)((o)>>8)
#define TEST_AH(i) do { \
count_alu();\
underrunProtect(3); \
*(--_nIns) = ((uint8_t)(i)); \
*(--_nIns) = 0xc4; \
*(--_nIns) = 0xf6; \
asm_output("test ah, %d",i); } while(0)
#define TEST_AX(i) do { \
count_fpu();\
underrunProtect(5); \
*(--_nIns) = (0); \
*(--_nIns) = ((uint8_t)(i)); \
*(--_nIns) = ((uint8_t)((i)>>8)); \
*(--_nIns) = (0); \
*(--_nIns) = 0xa9; \
asm_output("test ax, %d",i); } while(0)
#define FNSTSW_AX() do { count_fpu(); FPUc(0xdfe0); asm_output("fnstsw_ax"); } while(0)
#define FCHS() do { count_fpu(); FPUc(0xd9e0); asm_output("fchs"); } while(0)
#define FLD1() do { count_fpu(); FPUc(0xd9e8); asm_output("fld1"); fpu_push(); } while(0)
#define FLDZ() do { count_fpu(); FPUc(0xd9ee); asm_output("fldz"); fpu_push(); } while(0)
#define FFREE(r) do { count_fpu(); FPU(0xddc0, r); asm_output("ffree %s",fpn(r)); } while(0)
#define FSTQ(p,d,b) do { count_stq(); FPUm(0xdd02|(p), d, b); asm_output("fst%sq %d(%s)",((p)?"p":""),d,gpn(b)); if (p) fpu_pop(); } while(0)
#define FSTPQ(d,b) FSTQ(1,d,b)
#define FCOM(p,d,b) do { count_fpuld(); FPUm(0xdc02|(p), d, b); asm_output("fcom%s %d(%s)",((p)?"p":""),d,gpn(b)); if (p) fpu_pop(); } while(0)
#define FLDQ(d,b) do { count_ldq(); FPUm(0xdd00, d, b); asm_output("fldq %d(%s)",d,gpn(b)); fpu_push();} while(0)
#define FILDQ(d,b) do { count_fpuld(); FPUm(0xdf05, d, b); asm_output("fildq %d(%s)",d,gpn(b)); fpu_push(); } while(0)
#define FILD(d,b) do { count_fpuld(); FPUm(0xdb00, d, b); asm_output("fild %d(%s)",d,gpn(b)); fpu_push(); } while(0)
#define FADD(d,b) do { count_fpu(); FPUm(0xdc00, d, b); asm_output("fadd %d(%s)",d,gpn(b)); } while(0)
#define FSUB(d,b) do { count_fpu(); FPUm(0xdc04, d, b); asm_output("fsub %d(%s)",d,gpn(b)); } while(0)
#define FSUBR(d,b) do { count_fpu(); FPUm(0xdc05, d, b); asm_output("fsubr %d(%s)",d,gpn(b)); } while(0)
#define FMUL(d,b) do { count_fpu(); FPUm(0xdc01, d, b); asm_output("fmul %d(%s)",d,gpn(b)); } while(0)
#define FDIV(d,b) do { count_fpu(); FPUm(0xdc06, d, b); asm_output("fdiv %d(%s)",d,gpn(b)); } while(0)
#define FDIVR(d,b) do { count_fpu(); FPUm(0xdc07, d, b); asm_output("fdivr %d(%s)",d,gpn(b)); } while(0)
#define FINCSTP() do { count_fpu(); FPUc(0xd9f7); asm_output("fincstp"); } while(0)
#define FSTP(r) do { count_fpu(); FPU(0xddd8, r&7); asm_output("fstp %s",fpn(r)); fpu_pop();} while(0)
#define FCOMP() do { count_fpu(); FPUc(0xD8D9); asm_output("fcomp"); fpu_pop();} while(0)
#define FCOMPP() do { count_fpu(); FPUc(0xDED9); asm_output("fcompp"); fpu_pop();fpu_pop();} while(0)
#define FLDr(r) do { count_ldq(); FPU(0xd9c0,r); asm_output("fld %s",fpn(r)); fpu_push(); } while(0)
#define EMMS() do { count_fpu(); FPUc(0x0f77); asm_output("emms"); } while (0)
// standard direct call
#define CALL(c) do { \
count_call();\
underrunProtect(5); \
int offset = (c->_address) - ((int)_nIns); \
IMM32( (uint32_t)offset ); \
*(--_nIns) = 0xE8; \
verbose_only(asm_output("call %s",(c->_name));) \
debug_only(if ((c->_argtypes&3)==ARGSIZE_F) fpu_push();)\
} while (0)
// indirect call thru register
#define CALLr(c,r) do { \
count_calli();\
underrunProtect(2);\
ALU(0xff, 2, (r));\
verbose_only(asm_output("call %s",gpn(r));) \
debug_only(if ((c->_argtypes&3)==ARGSIZE_F) fpu_push();)\
} while (0)
}
#endif // __nanojit_Nativei386__