gecko/content/media/FileBlockCache.h

214 lines
7.4 KiB
C++

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim:set ts=2 sw=2 sts=2 et cindent: */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this file,
* You can obtain one at http://mozilla.org/MPL/2.0/. */
#ifndef FILE_BLOCK_CACHE_H_
#define FILE_BLOCK_CACHE_H_
#include "mozilla/Attributes.h"
#include "mozilla/Monitor.h"
#include "nsTArray.h"
#include "MediaCache.h"
#include "nsDeque.h"
#include "nsThreadUtils.h"
struct PRFileDesc;
namespace mozilla {
// Manages file I/O for the media cache. Data comes in over the network
// via callbacks on the main thread, however we don't want to write the
// incoming data to the media cache on the main thread, as this could block
// causing UI jank.
//
// So FileBlockCache provides an abstraction for a temporary file accessible
// as an array of blocks, which supports a block move operation, and
// allows synchronous reading and writing from any thread, with writes being
// buffered so as not to block.
//
// Writes and cache block moves (which require reading) are deferred to
// their own non-main thread. This object also ensures that data which has
// been scheduled to be written, but hasn't actually *been* written, is read
// as if it had, i.e. pending writes are cached in readable memory until
// they're flushed to file.
//
// To improve efficiency, writes can only be done at block granularity,
// whereas reads can be done with byte granularity.
//
// Note it's also recommended not to read from the media cache from the main
// thread to prevent jank.
//
// When WriteBlock() or MoveBlock() are called, data about how to complete
// the block change is added to mBlockChanges, indexed by block index, and
// the block index is appended to the mChangeIndexList. This enables
// us to quickly tell if a block has been changed, and ensures we can perform
// the changes in the correct order. An event is dispatched to perform the
// changes listed in mBlockChanges to file. Read() checks mBlockChanges and
// determines the current data to return, reading from file or from
// mBlockChanges as necessary.
class FileBlockCache : public nsRunnable {
public:
enum {
BLOCK_SIZE = MediaCacheStream::BLOCK_SIZE
};
FileBlockCache();
~FileBlockCache();
// Assumes ownership of aFD.
nsresult Open(PRFileDesc* aFD);
// Closes writer, shuts down thread.
void Close();
// Can be called on any thread. This defers to a non-main thread.
nsresult WriteBlock(uint32_t aBlockIndex, const uint8_t* aData);
// Performs block writes and block moves on its own thread.
NS_IMETHOD Run() MOZ_OVERRIDE;
// Synchronously reads data from file. May read from file or memory
// depending on whether written blocks have been flushed to file yet.
// Not recommended to be called from the main thread, as can cause jank.
nsresult Read(int64_t aOffset,
uint8_t* aData,
int32_t aLength,
int32_t* aBytes);
// Moves a block asynchronously. Can be called on any thread.
// This defers file I/O to a non-main thread.
nsresult MoveBlock(int32_t aSourceBlockIndex, int32_t aDestBlockIndex);
// Represents a change yet to be made to a block in the file. The change
// is either a write (and the data to be written is stored in this struct)
// or a move (and the index of the source block is stored instead).
struct BlockChange MOZ_FINAL {
NS_INLINE_DECL_THREADSAFE_REFCOUNTING(BlockChange)
// This block is waiting in memory to be written.
// Stores a copy of the block, so we can write it asynchronously.
BlockChange(const uint8_t* aData)
: mSourceBlockIndex(-1)
{
mData = new uint8_t[BLOCK_SIZE];
memcpy(mData.get(), aData, BLOCK_SIZE);
}
// This block's contents are located in another file
// block, i.e. this block has been moved.
BlockChange(int32_t aSourceBlockIndex)
: mSourceBlockIndex(aSourceBlockIndex) {}
nsAutoArrayPtr<uint8_t> mData;
const int32_t mSourceBlockIndex;
bool IsMove() const {
return mSourceBlockIndex != -1;
}
bool IsWrite() const {
return mSourceBlockIndex == -1 &&
mData.get() != nullptr;
}
private:
// Private destructor, to discourage deletion outside of Release():
~BlockChange()
{
}
};
class Int32Queue : private nsDeque {
public:
int32_t PopFront() {
int32_t front = ObjectAt(0);
nsDeque::PopFront();
return front;
}
void PushBack(int32_t aValue) {
nsDeque::Push(reinterpret_cast<void*>(aValue));
}
bool Contains(int32_t aValue) {
for (int32_t i = 0; i < GetSize(); ++i) {
if (ObjectAt(i) == aValue) {
return true;
}
}
return false;
}
bool IsEmpty() {
return nsDeque::GetSize() == 0;
}
private:
int32_t ObjectAt(int32_t aIndex) {
void* v = nsDeque::ObjectAt(aIndex);
return reinterpret_cast<uintptr_t>(v);
}
};
private:
int64_t BlockIndexToOffset(int32_t aBlockIndex) {
return static_cast<int64_t>(aBlockIndex) * BLOCK_SIZE;
}
// Monitor which controls access to mFD and mFDCurrentPos. Don't hold
// mDataMonitor while holding mFileMonitor! mFileMonitor must be owned
// while accessing any of the following data fields or methods.
Monitor mFileMonitor;
// Moves a block already committed to file.
nsresult MoveBlockInFile(int32_t aSourceBlockIndex,
int32_t aDestBlockIndex);
// Seeks file pointer.
nsresult Seek(int64_t aOffset);
// Reads data from file offset.
nsresult ReadFromFile(int64_t aOffset,
uint8_t* aDest,
int32_t aBytesToRead,
int32_t& aBytesRead);
nsresult WriteBlockToFile(int32_t aBlockIndex, const uint8_t* aBlockData);
// File descriptor we're writing to. This is created externally, but
// shutdown by us.
PRFileDesc* mFD;
// The current file offset in the file.
int64_t mFDCurrentPos;
// Monitor which controls access to all data in this class, except mFD
// and mFDCurrentPos. Don't hold mDataMonitor while holding mFileMonitor!
// mDataMonitor must be owned while accessing any of the following data
// fields or methods.
Monitor mDataMonitor;
// Ensures we either are running the event to preform IO, or an event
// has been dispatched to preform the IO.
// mDataMonitor must be owned while calling this.
void EnsureWriteScheduled();
// Array of block changes to made. If mBlockChanges[offset/BLOCK_SIZE] == nullptr,
// then the block has no pending changes to be written, but if
// mBlockChanges[offset/BLOCK_SIZE] != nullptr, then either there's a block
// cached in memory waiting to be written, or this block is the target of a
// block move.
nsTArray< nsRefPtr<BlockChange> > mBlockChanges;
// Thread upon which block writes and block moves are performed. This is
// created upon open, and shutdown (asynchronously) upon close (on the
// main thread).
nsCOMPtr<nsIThread> mThread;
// Queue of pending block indexes that need to be written or moved.
//nsAutoTArray<int32_t, 8> mChangeIndexList;
Int32Queue mChangeIndexList;
// True if we've dispatched an event to commit all pending block changes
// to file on mThread.
bool mIsWriteScheduled;
// True if the writer is ready to write data to file.
bool mIsOpen;
};
} // End namespace mozilla.
#endif /* FILE_BLOCK_CACHE_H_ */