gecko/content/base/public/nsIDocumentEncoder.idl

321 lines
12 KiB
Plaintext

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* the Mozilla Foundation.
* Portions created by the Initial Developer are Copyright (C) 2006
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Josh Lurz <jlurz24@gmail.com>
*
* Alternatively, the contents of this file may be used under the terms of
* either of the GNU General Public License Version 2 or later (the "GPL"),
* or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include "nsISupports.idl"
interface nsIDOMDocument;
interface nsIDOMRange;
interface nsISelection;
interface nsIDOMNode;
interface nsIOutputStream;
[scriptable, uuid(c0da5b87-0ba7-4d7c-8cb3-fcb02af4253d)]
interface nsIDocumentEncoderNodeFixup : nsISupports
{
/**
* Create a fixed up version of a node. This method is called before
* each node in a document is about to be persisted. The implementor
* may return a new node with fixed up attributes or null. If null is
* returned the node should be used as-is.
* @param aNode Node to fixup.
* @param [OUT] aSerializeCloneKids True if the document encoder should
* apply recursive serialization to the children of the fixed up node
* instead of the children of the original node.
* @return The resulting fixed up node.
*/
nsIDOMNode fixupNode(in nsIDOMNode aNode, out boolean aSerializeCloneKids);
};
[scriptable, uuid(f85c5a20-258d-11db-a98b-0800200c9a66)]
interface nsIDocumentEncoder : nsISupports
{
// Output methods flag bits. There are a frightening number of these,
// because everyone wants something a little bit different
/**
* Output only the selection (as opposed to the whole document).
*/
const unsigned long OutputSelectionOnly = (1 << 0);
/** Plaintext output: Convert html to plaintext that looks like the html.
* Implies wrap (except inside <pre>), since html wraps.
* HTML, XHTML and XML output: do prettyprinting, ignoring existing formatting.
* XML output : it doesn't implicitly wrap
*/
const unsigned long OutputFormatted = (1 << 1);
/** Don't do prettyprinting. Don't do any wrapping that's not in the existing
* HTML/XML source. This option overrides OutputFormatted if both are set.
* HTML/XHTML output: If neither are set, there won't be prettyprinting too, but
* long lines will be wrapped.
* Supported also in XML and Plaintext output.
* @note This option does not affect entity conversion.
*/
const unsigned long OutputRaw = (1 << 2);
/**
* Do not print html head tags.
* XHTML/HTML output only.
*/
const unsigned long OutputBodyOnly = (1 << 3);
/**
* Output as though the content is preformatted
* (e.g. maybe it's wrapped in a PRE or PRE_WRAP style tag)
* Plaintext output only.
* XXXbz How does this interact with
* OutputFormatted/OutputRaw/OutputPreformatted/OutputFormatFlowed?
*/
const unsigned long OutputPreformatted = (1 << 4);
/**
* Wrap even if we're not doing formatted output (e.g. for text fields).
* Supported in XML, XHTML, HTML and Plaintext output.
* Set implicitly in HTML/XHTML output when no OutputRaw.
* Ignored when OutputRaw.
* XXXLJ: set implicitly in HTML/XHTML output, to keep compatible behaviors
* for old callers of this interface
* XXXbz How does this interact with OutputFormatFlowed?
*/
const unsigned long OutputWrap = (1 << 5);
/**
* Output for format flowed (RFC 2646). This is used when converting
* to text for mail sending. This differs just slightly
* but in an important way from normal formatted, and that is that
* lines are space stuffed. This can't (correctly) be done later.
* PlainText output only.
* XXXbz How does this interact with
* OutputFormatted/OutputRaw/OutputPreformatted/OutputWrap?
*/
const unsigned long OutputFormatFlowed = (1 << 6);
/**
* Convert links, image src, and script src to absolute URLs when possible.
* XHTML/HTML output only.
*/
const unsigned long OutputAbsoluteLinks = (1 << 7);
/**
* Attempt to encode entities standardized at W3C (HTML, MathML, etc).
* This is a catch-all flag for documents with mixed contents. Beware of
* interoperability issues. See below for other flags which might likely
* do what you want.
* XHTML/HTML output only.
*/
const unsigned long OutputEncodeW3CEntities = (1 << 8);
/**
* LineBreak processing: if this flag is set than CR line breaks will
* be written. If neither this nor OutputLFLineBreak is set, then we
* will use platform line breaks. The combination of the two flags will
* cause CRLF line breaks to be written.
*/
const unsigned long OutputCRLineBreak = (1 << 9);
/**
* LineBreak processing: if this flag is set than LF line breaks will
* be written. If neither this nor OutputCRLineBreak is set, then we
* will use platform line breaks. The combination of the two flags will
* cause CRLF line breaks to be written.
*/
const unsigned long OutputLFLineBreak = (1 << 10);
/**
* Output the content of noscript elements (only for serializing
* to plaintext).
*/
const unsigned long OutputNoScriptContent = (1 << 11);
/**
* Output the content of noframes elements (only for serializing
* to plaintext).
*/
const unsigned long OutputNoFramesContent = (1 << 12);
/**
* Don't allow any formatting nodes (e.g. <br>, <b>) inside a <pre>.
* This is used primarily by mail. XHTML/HTML output only.
*/
const unsigned long OutputNoFormattingInPre = (1 << 13);
/**
* Encode entities when outputting to a string.
* E.g. If set, we'll output &nbsp; if clear, we'll output 0xa0.
* The basic set is just &nbsp; &amp; &lt; &gt; &quot; for interoperability
* with older products that don't support &alpha; and friends.
* XHTML/HTML output only.
*/
const unsigned long OutputEncodeBasicEntities = (1 << 14);
/**
* Encode entities when outputting to a string.
* The Latin1 entity set additionally includes 8bit accented letters
* between 128 and 255.
* XHTML/HTML output only.
*/
const unsigned long OutputEncodeLatin1Entities = (1 << 15);
/**
* Encode entities when outputting to a string.
* The HTML entity set additionally includes accented letters, greek
* letters, and other special markup symbols as defined in HTML4.
* XHTML/HTML output only.
*/
const unsigned long OutputEncodeHTMLEntities = (1 << 16);
/**
* Normally &nbsp; is replaced with a space character when
* encoding data as plain text, set this flag if that's
* not desired.
* Plaintext output only.
*/
const unsigned long OutputPersistNBSP = (1 << 17);
/**
* Normally when serializing the whole document using the HTML or
* XHTML serializer, the encoding declaration is rewritten to match.
* This flag suppresses that behavior.
*/
const unsigned long OutputDontRewriteEncodingDeclaration = (1 << 18);
/**
* Initialize with a pointer to the document and the mime type.
* @param aDocument Document to encode.
* @param aMimeType MimeType to use. May also be set by SetMimeType.
* @param aFlags Flags to use while encoding. May also be set by SetFlags.
*/
void init(in nsIDOMDocument aDocument,
in AString aMimeType,
in unsigned long aFlags);
/**
* If the selection is set to a non-null value, then the
* selection is used for encoding, otherwise the entire
* document is encoded.
* @param aSelection The selection to encode.
*/
void setSelection(in nsISelection aSelection);
/**
* If the range is set to a non-null value, then the
* range is used for encoding, otherwise the entire
* document or selection is encoded.
* @param aRange The range to encode.
*/
void setRange(in nsIDOMRange aRange);
/**
* If the node is set to a non-null value, then the
* node is used for encoding, otherwise the entire
* document or range or selection is encoded.
* @param aNode The node to encode.
*/
void setNode(in nsIDOMNode aNode);
/**
* If the container is set to a non-null value, then its
* child nodes are used for encoding, otherwise the entire
* document or range or selection or node is encoded.
* @param aContainer The node which child nodes will be encoded.
*/
void setContainerNode(in nsIDOMNode aContainer);
/**
* Documents typically have an intrinsic character set,
* but if no intrinsic value is found, the platform character set
* is used. This function overrides both the intrinisc and platform
* charset.
* @param aCharset Overrides the both the intrinsic or platform
* character set when encoding the document.
*
* Possible result codes: NS_ERROR_NO_CHARSET_CONVERTER
*/
void setCharset(in ACString aCharset);
/**
* Set a wrap column. This may have no effect in some types of encoders.
* @param aWrapColumn Column to which to wrap.
*/
void setWrapColumn(in unsigned long aWrapColumn);
/**
* The mime type preferred by the encoder. This piece of api was
* added because the copy encoder may need to switch mime types on you
* if you ask it to copy html that really represents plaintext content.
* Call this AFTER Init() and SetSelection() have both been called.
*/
readonly attribute AString mimeType;
/**
* Encode the document and send the result to the nsIOutputStream.
*
* Possible result codes are the stream errors which might have
* been encountered.
* @param aStream Stream into which to encode.
*/
void encodeToStream(in nsIOutputStream aStream);
/**
* Encode the document into a string.
*
* @return The document encoded into a string.
*/
AString encodeToString();
/**
* Encode the document into a string. Stores the extra context information
* into the two arguments.
* @param [OUT] aContextString The string where the parent heirarchy
* information will be stored.
* @param [OUT] aInfoString The string where extra context info will
* be stored.
* @return The document encoded as a string.
*
*/
AString encodeToStringWithContext( out AString aContextString,
out AString aInfoString);
/**
* Set the fixup object associated with node persistence.
* @param aFixup The fixup object.
*/
void setNodeFixup(in nsIDocumentEncoderNodeFixup aFixup);
};