gecko/browser/devtools/sourceeditor/source-editor.jsm

445 lines
13 KiB
JavaScript

/* vim:set ts=2 sw=2 sts=2 et tw=80:
* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Source Editor component.
*
* The Initial Developer of the Original Code is
* The Mozilla Foundation.
* Portions created by the Initial Developer are Copyright (C) 2011
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Mihai Sucan <mihai.sucan@gmail.com> (original author)
* Spyros Livathinos <livathinos.spyros@gmail.com>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK *****/
"use strict";
const Cu = Components.utils;
Cu.import("resource://gre/modules/Services.jsm");
Cu.import("resource://gre/modules/XPCOMUtils.jsm");
Cu.import("resource:///modules/source-editor-ui.jsm");
const PREF_EDITOR_COMPONENT = "devtools.editor.component";
const SOURCEEDITOR_L10N = "chrome://browser/locale/devtools/sourceeditor.properties";
var component = Services.prefs.getCharPref(PREF_EDITOR_COMPONENT);
var obj = {};
try {
if (component == "ui") {
throw new Error("The ui editor component is not available.");
}
Cu.import("resource:///modules/source-editor-" + component + ".jsm", obj);
} catch (ex) {
Cu.reportError(ex);
Cu.reportError("SourceEditor component failed to load: " + component);
// If the component does not exist, clear the user pref back to the default.
Services.prefs.clearUserPref(PREF_EDITOR_COMPONENT);
// Load the default editor component.
component = Services.prefs.getCharPref(PREF_EDITOR_COMPONENT);
Cu.import("resource:///modules/source-editor-" + component + ".jsm", obj);
}
// Export the SourceEditor.
var SourceEditor = obj.SourceEditor;
var EXPORTED_SYMBOLS = ["SourceEditor"];
// Add the constants used by all SourceEditors.
XPCOMUtils.defineLazyGetter(SourceEditorUI, "strings", function() {
return Services.strings.createBundle(SOURCEEDITOR_L10N);
});
/**
* Known SourceEditor preferences.
*/
SourceEditor.PREFS = {
TAB_SIZE: "devtools.editor.tabsize",
EXPAND_TAB: "devtools.editor.expandtab",
COMPONENT: PREF_EDITOR_COMPONENT,
};
/**
* Predefined source editor modes for JavaScript, CSS and other languages.
*/
SourceEditor.MODES = {
JAVASCRIPT: "js",
CSS: "css",
TEXT: "text",
HTML: "html",
XML: "xml",
};
/**
* Predefined themes for syntax highlighting.
*/
SourceEditor.THEMES = {
MOZILLA: "mozilla",
};
/**
* Source editor configuration defaults.
* @see SourceEditor.init
*/
SourceEditor.DEFAULTS = {
/**
* The text you want shown when the editor opens up.
* @type string
*/
initialText: "",
/**
* The editor mode, based on the file type you want to edit. You can use one of
* the predefined modes.
*
* @see SourceEditor.MODES
* @type string
*/
mode: SourceEditor.MODES.TEXT,
/**
* The syntax highlighting theme you want. You can use one of the predefined
* themes, or you can point to your CSS file.
*
* @see SourceEditor.THEMES.
* @type string
*/
theme: SourceEditor.THEMES.MOZILLA,
/**
* How many steps should the undo stack hold.
* @type number
*/
undoLimit: 200,
/**
* Define how many spaces to use for a tab character. This value is overridden
* by a user preference, see SourceEditor.PREFS.TAB_SIZE.
*
* @type number
*/
tabSize: 4,
/**
* Tells if you want tab characters to be expanded to spaces. This value is
* overridden by a user preference, see SourceEditor.PREFS.EXPAND_TAB.
* @type boolean
*/
expandTab: true,
/**
* Tells if you want the editor to be read only or not.
* @type boolean
*/
readOnly: false,
/**
* Display the line numbers gutter.
* @type boolean
*/
showLineNumbers: false,
/**
* Display the annotations gutter/ruler. This gutter currently supports
* annotations of breakpoint type.
* @type boolean
*/
showAnnotationRuler: false,
/**
* Display the overview gutter/ruler. This gutter presents an overview of the
* current annotations in the editor, for example the breakpoints.
* @type boolean
*/
showOverviewRuler: false,
/**
* Highlight the current line.
* @type boolean
*/
highlightCurrentLine: true,
/**
* An array of objects that allows you to define custom editor keyboard
* bindings. Each object can have:
* - action - name of the editor action to invoke.
* - code - keyCode for the shortcut.
* - accel - boolean for the Accel key (Cmd on Macs, Ctrl on Linux/Windows).
* - shift - boolean for the Shift key.
* - alt - boolean for the Alt key.
* - callback - optional function to invoke, if the action is not predefined
* in the editor.
* @type array
*/
keys: null,
};
/**
* Known editor events you can listen for.
*/
SourceEditor.EVENTS = {
/**
* The contextmenu event is fired when the editor context menu is invoked. The
* event object properties:
* - x - the pointer location on the x axis, relative to the document the
* user is editing.
* - y - the pointer location on the y axis, relative to the document the
* user is editing.
* - screenX - the pointer location on the x axis, relative to the screen.
* This value comes from the DOM contextmenu event.screenX property.
* - screenY - the pointer location on the y axis, relative to the screen.
* This value comes from the DOM contextmenu event.screenY property.
*/
CONTEXT_MENU: "ContextMenu",
/**
* The TextChanged event is fired when the editor content changes. The event
* object properties:
* - start - the character offset in the document where the change has
* occured.
* - removedCharCount - the number of characters removed from the document.
* - addedCharCount - the number of characters added to the document.
*/
TEXT_CHANGED: "TextChanged",
/**
* The Selection event is fired when the editor selection changes. The event
* object properties:
* - oldValue - the old selection range.
* - newValue - the new selection range.
* Both ranges are objects which hold two properties: start and end.
*/
SELECTION: "Selection",
/**
* The focus event is fired when the editor is focused.
*/
FOCUS: "Focus",
/**
* The blur event is fired when the editor goes out of focus.
*/
BLUR: "Blur",
/**
* The MouseMove event is sent when the user moves the mouse over a line
* annotation. The event object properties:
* - event - the DOM mousemove event object.
* - x and y - the mouse coordinates relative to the document being edited.
*/
MOUSE_MOVE: "MouseMove",
/**
* The MouseOver event is sent when the mouse pointer enters a line
* annotation. The event object properties:
* - event - the DOM mouseover event object.
* - x and y - the mouse coordinates relative to the document being edited.
*/
MOUSE_OVER: "MouseOver",
/**
* This MouseOut event is sent when the mouse pointer exits a line
* annotation. The event object properties:
* - event - the DOM mouseout event object.
* - x and y - the mouse coordinates relative to the document being edited.
*/
MOUSE_OUT: "MouseOut",
/**
* The BreakpointChange event is fired when a new breakpoint is added or when
* a breakpoint is removed - either through API use or through the editor UI.
* Event object properties:
* - added - array that holds the new breakpoints.
* - removed - array that holds the breakpoints that have been removed.
* Each object in the added/removed arrays holds two properties: line and
* condition.
*/
BREAKPOINT_CHANGE: "BreakpointChange",
};
/**
* Extend a destination object with properties from a source object.
*
* @param object aDestination
* @param object aSource
*/
function extend(aDestination, aSource)
{
for (let name in aSource) {
if (!aDestination.hasOwnProperty(name)) {
aDestination[name] = aSource[name];
}
}
}
/**
* Add methods common to all components.
*/
extend(SourceEditor.prototype, {
_lastFind: null,
/**
* Find a string in the editor.
*
* @param string aString
* The string you want to search for. If |aString| is not given the
* currently selected text is used.
* @param object [aOptions]
* Optional find options:
* - start: (integer) offset to start searching from. Default: 0 if
* backwards is false. If backwards is true then start = text.length.
* - ignoreCase: (boolean) tells if you want the search to be case
* insensitive or not. Default: false.
* - backwards: (boolean) tells if you want the search to go backwards
* from the given |start| offset. Default: false.
* @return integer
* The offset where the string was found.
*/
find: function SE_find(aString, aOptions)
{
if (typeof(aString) != "string") {
return -1;
}
aOptions = aOptions || {};
let str = aOptions.ignoreCase ? aString.toLowerCase() : aString;
let text = this.getText();
if (aOptions.ignoreCase) {
text = text.toLowerCase();
}
let index = aOptions.backwards ?
text.lastIndexOf(str, aOptions.start) :
text.indexOf(str, aOptions.start);
let lastFoundIndex = index;
if (index == -1 && this.lastFind && this.lastFind.index > -1 &&
this.lastFind.str === aString &&
this.lastFind.ignoreCase === !!aOptions.ignoreCase) {
lastFoundIndex = this.lastFind.index;
}
this._lastFind = {
str: aString,
index: index,
lastFound: lastFoundIndex,
ignoreCase: !!aOptions.ignoreCase,
};
return index;
},
/**
* Find the next occurrence of the last search operation.
*
* @param boolean aWrap
* Tells if you want to restart the search from the beginning of the
* document if the string is not found.
* @return integer
* The offset where the string was found.
*/
findNext: function SE_findNext(aWrap)
{
if (!this.lastFind && this.lastFind.lastFound == -1) {
return -1;
}
let options = {
start: this.lastFind.lastFound + this.lastFind.str.length,
ignoreCase: this.lastFind.ignoreCase,
};
let index = this.find(this.lastFind.str, options);
if (index == -1 && aWrap) {
options.start = 0;
index = this.find(this.lastFind.str, options);
}
return index;
},
/**
* Find the previous occurrence of the last search operation.
*
* @param boolean aWrap
* Tells if you want to restart the search from the end of the
* document if the string is not found.
* @return integer
* The offset where the string was found.
*/
findPrevious: function SE_findPrevious(aWrap)
{
if (!this.lastFind && this.lastFind.lastFound == -1) {
return -1;
}
let options = {
start: this.lastFind.lastFound - this.lastFind.str.length,
ignoreCase: this.lastFind.ignoreCase,
backwards: true,
};
let index;
if (options.start > 0) {
index = this.find(this.lastFind.str, options);
} else {
index = this._lastFind.index = -1;
}
if (index == -1 && aWrap) {
options.start = this.getCharCount() - 1;
index = this.find(this.lastFind.str, options);
}
return index;
},
});
/**
* Retrieve the last find operation result. This object holds the following
* properties:
* - str: the last search string.
* - index: stores the result of the most recent find operation. This is the
* index in the text where |str| was found or -1 otherwise.
* - lastFound: tracks the index where |str| was last found, throughout
* multiple find operations. This can be -1 if |str| was never found in the
* document.
* - ignoreCase: tells if the search was case insensitive or not.
* @type object
*/
Object.defineProperty(SourceEditor.prototype, "lastFind", {
get: function() { return this._lastFind; },
enumerable: true,
configurable: true,
});