gecko/build/upload.py
2010-04-30 14:54:51 -04:00

228 lines
10 KiB
Python

#!/usr/bin/python
#
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is mozilla.org code.
#
# The Initial Developer of the Original Code is
# The Mozilla Foundation
# Portions created by the Initial Developer are Copyright (C) 2008
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
# Ted Mielczarek <ted.mielczarek@gmail.com>
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
#
# When run directly, this script expects the following environment variables
# to be set:
# UPLOAD_HOST : host to upload files to
# UPLOAD_USER : username on that host
# UPLOAD_PATH : path on that host to put the files in
#
# And will use the following optional environment variables if set:
# UPLOAD_SSH_KEY : path to a ssh private key to use
# UPLOAD_PORT : port to use for ssh
# POST_UPLOAD_CMD: a commandline to run on the remote host after uploading.
# UPLOAD_PATH and the full paths of all files uploaded will
# be appended to the commandline.
#
# All files to be uploaded should be passed as commandline arguments to this
# script. The script takes one other parameter, --base-path, which you can use
# to indicate that files should be uploaded including their paths relative
# to the base path.
import sys, os
from optparse import OptionParser
from subprocess import Popen, PIPE
from util import check_call
def RequireEnvironmentVariable(v):
"""Return the value of the environment variable named v, or print
an error and exit if it's unset (or empty)."""
if not v in os.environ or os.environ[v] == "":
print "Error: required environment variable %s not set" % v
sys.exit(1)
return os.environ[v]
def OptionalEnvironmentVariable(v):
"""Return the value of the environment variable named v, or None
if it's unset (or empty)."""
if v in os.environ and os.environ[v] != "":
return os.environ[v]
return None
def FixupMsysPath(path):
"""MSYS helpfully translates absolute pathnames in environment variables
and commandline arguments into Windows native paths. This sucks if you're
trying to pass an absolute path on a remote server. This function attempts
to un-mangle such paths."""
if 'OSTYPE' in os.environ and os.environ['OSTYPE'] == 'msys':
# sort of awful, find out where our shell is (should be in msys/bin)
# and strip the first part of that path out of the other path
if 'SHELL' in os.environ:
sh = os.environ['SHELL']
msys = sh[:sh.find('/bin')]
if path.startswith(msys):
path = path[len(msys):]
return path
def WindowsPathToMsysPath(path):
"""Translate a Windows pathname to an MSYS pathname.
Necessary because we call out to ssh/scp, which are MSYS binaries
and expect MSYS paths."""
if sys.platform != 'win32':
return path
(drive, path) = os.path.splitdrive(os.path.abspath(path))
return "/" + drive[0] + path.replace('\\','/')
def AppendOptionalArgsToSSHCommandline(cmdline, port, ssh_key):
"""Given optional port and ssh key values, append valid OpenSSH
commandline arguments to the list cmdline if the values are not None."""
if port is not None:
cmdline.append("-P%d" % port)
if ssh_key is not None:
# Don't interpret ~ paths - ssh can handle that on its own
if not ssh_key.startswith('~'):
ssh_key = WindowsPathToMsysPath(ssh_key)
cmdline.extend(["-o", "IdentityFile=%s" % ssh_key])
def DoSSHCommand(command, user, host, port=None, ssh_key=None):
"""Execute command on user@host using ssh. Optionally use
port and ssh_key, if provided."""
cmdline = ["ssh"]
AppendOptionalArgsToSSHCommandline(cmdline, port, ssh_key)
cmdline.extend(["%s@%s" % (user, host), command])
cmd = Popen(cmdline, stdout=PIPE)
retcode = cmd.wait()
if retcode != 0:
raise Exception("Command %s returned non-zero exit code: %i" % \
(cmdline, retcode))
return cmd.stdout.read().strip()
def DoSCPFile(file, remote_path, user, host, port=None, ssh_key=None):
"""Upload file to user@host:remote_path using scp. Optionally use
port and ssh_key, if provided."""
cmdline = ["scp"]
AppendOptionalArgsToSSHCommandline(cmdline, port, ssh_key)
cmdline.extend([WindowsPathToMsysPath(file),
"%s@%s:%s" % (user, host, remote_path)])
check_call(cmdline)
def GetRemotePath(path, local_file, base_path):
"""Given a remote path to upload to, a full path to a local file, and an
optional full path that is a base path of the local file, construct the
full remote path to place the file in. If base_path is not None, include
the relative path from base_path to file."""
if base_path is None or not local_file.startswith(base_path):
return path
dir = os.path.dirname(local_file)
# strip base_path + extra slash and make it unixy
dir = dir[len(base_path)+1:].replace('\\','/')
return path + dir
def UploadFiles(user, host, path, files, verbose=False, port=None, ssh_key=None, base_path=None, upload_to_temp_dir=False, post_upload_command=None):
"""Upload each file in the list files to user@host:path. Optionally pass
port and ssh_key to the ssh commands. If base_path is not None, upload
files including their path relative to base_path. If upload_to_temp_dir is
True files will be uploaded to a temporary directory on the remote server.
Generally, you should have a post upload command specified in these cases
that can move them around to their correct location(s).
If post_upload_command is not None, execute that command on the remote host
after uploading all files, passing it the upload path, and the full paths to
all files uploaded.
If verbose is True, print status updates while working."""
if upload_to_temp_dir:
path = DoSSHCommand("mktemp -d", user, host, port=port, ssh_key=ssh_key)
if not path.endswith("/"):
path += "/"
if base_path is not None:
base_path = os.path.abspath(base_path)
remote_files = []
try:
for file in files:
file = os.path.abspath(file)
if not os.path.isfile(file):
raise IOError("File not found: %s" % file)
# first ensure that path exists remotely
remote_path = GetRemotePath(path, file, base_path)
DoSSHCommand("mkdir -p " + remote_path, user, host, port=port, ssh_key=ssh_key)
if verbose:
print "Uploading " + file
DoSCPFile(file, remote_path, user, host, port=port, ssh_key=ssh_key)
remote_files.append(remote_path + '/' + os.path.basename(file))
if post_upload_command is not None:
if verbose:
print "Running post-upload command: " + post_upload_command
file_list = '"' + '" "'.join(remote_files) + '"'
DoSSHCommand('%s "%s" %s' % (post_upload_command, path, file_list), user, host, port=port, ssh_key=ssh_key)
finally:
if upload_to_temp_dir:
DoSSHCommand("rm -rf %s" % path, user, host, port=port,
ssh_key=ssh_key)
if verbose:
print "Upload complete"
if __name__ == '__main__':
host = RequireEnvironmentVariable('UPLOAD_HOST')
user = RequireEnvironmentVariable('UPLOAD_USER')
path = OptionalEnvironmentVariable('UPLOAD_PATH')
upload_to_temp_dir = OptionalEnvironmentVariable('UPLOAD_TO_TEMP')
port = OptionalEnvironmentVariable('UPLOAD_PORT')
if port is not None:
port = int(port)
key = OptionalEnvironmentVariable('UPLOAD_SSH_KEY')
post_upload_command = OptionalEnvironmentVariable('POST_UPLOAD_CMD')
if (not path and not upload_to_temp_dir) or (path and upload_to_temp_dir):
print "One (and only one of UPLOAD_PATH or UPLOAD_TO_TEMP must be " + \
"defined."
sys.exit(1)
if sys.platform == 'win32':
if path is not None:
path = FixupMsysPath(path)
if post_upload_command is not None:
post_upload_command = FixupMsysPath(post_upload_command)
parser = OptionParser(usage="usage: %prog [options] <files>")
parser.add_option("-b", "--base-path",
action="store", dest="base_path",
help="Preserve file paths relative to this path when uploading. If unset, all files will be uploaded directly to UPLOAD_PATH.")
(options, args) = parser.parse_args()
if len(args) < 1:
print "You must specify at least one file to upload"
sys.exit(1)
try:
UploadFiles(user, host, path, args, base_path=options.base_path,
port=port, ssh_key=key, upload_to_temp_dir=upload_to_temp_dir,
post_upload_command=post_upload_command,
verbose=True)
except IOError, (strerror):
print strerror
sys.exit(1)
except Exception, (err):
print err
sys.exit(2)