gecko/content/media/nsBuiltinDecoderReader.cpp

392 lines
13 KiB
C++

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim:set ts=2 sw=2 sts=2 et cindent: */
/* ***** BEGIN LICENSE BLOCK *****
* Version: ML 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is Mozilla code.
*
* The Initial Developer of the Original Code is the Mozilla Foundation.
* Portions created by the Initial Developer are Copyright (C) 2010
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Chris Double <chris.double@double.co.nz>
* Chris Pearce <chris@pearce.org.nz>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include "nsISeekableStream.h"
#include "nsClassHashtable.h"
#include "nsTArray.h"
#include "nsBuiltinDecoder.h"
#include "nsBuiltinDecoderReader.h"
#include "nsBuiltinDecoderStateMachine.h"
#include "mozilla/mozalloc.h"
#include "VideoUtils.h"
using namespace mozilla;
using mozilla::layers::ImageContainer;
using mozilla::layers::PlanarYCbCrImage;
// Un-comment to enable logging of seek bisections.
//#define SEEK_LOGGING
#ifdef PR_LOGGING
extern PRLogModuleInfo* gBuiltinDecoderLog;
#define LOG(type, msg) PR_LOG(gBuiltinDecoderLog, type, msg)
#ifdef SEEK_LOGGING
#define SEEK_LOG(type, msg) PR_LOG(gBuiltinDecoderLog, type, msg)
#else
#define SEEK_LOG(type, msg)
#endif
#else
#define LOG(type, msg)
#define SEEK_LOG(type, msg)
#endif
static PRBool
ValidatePlane(const VideoData::YCbCrBuffer::Plane& aPlane)
{
return aPlane.mWidth <= PlanarYCbCrImage::MAX_DIMENSION &&
aPlane.mHeight <= PlanarYCbCrImage::MAX_DIMENSION &&
aPlane.mStride > 0;
}
VideoData* VideoData::Create(nsVideoInfo& aInfo,
ImageContainer* aContainer,
PRInt64 aOffset,
PRInt64 aTime,
PRInt64 aEndTime,
const YCbCrBuffer& aBuffer,
PRBool aKeyframe,
PRInt64 aTimecode)
{
if (!aContainer) {
return nsnull;
}
// The following situation should never happen unless there is a bug
// in the decoder
if (aBuffer.mPlanes[1].mWidth != aBuffer.mPlanes[2].mWidth ||
aBuffer.mPlanes[1].mHeight != aBuffer.mPlanes[2].mHeight) {
NS_ERROR("C planes with different sizes");
return nsnull;
}
// The following situations could be triggered by invalid input
if (aInfo.mPicture.width <= 0 || aInfo.mPicture.height <= 0) {
NS_WARNING("Empty picture rect");
return nsnull;
}
if (aBuffer.mPlanes[0].mWidth != PRUint32(aInfo.mFrame.width) ||
aBuffer.mPlanes[0].mHeight != PRUint32(aInfo.mFrame.height)) {
NS_WARNING("Unexpected frame size");
return nsnull;
}
if (!ValidatePlane(aBuffer.mPlanes[0]) || !ValidatePlane(aBuffer.mPlanes[1]) ||
!ValidatePlane(aBuffer.mPlanes[2])) {
NS_WARNING("Invalid plane size");
return nsnull;
}
// Ensure the picture size specified in the headers can be extracted out of
// the frame we've been supplied without indexing out of bounds.
PRUint32 picXLimit;
PRUint32 picYLimit;
if (!AddOverflow32(aInfo.mPicture.x, aInfo.mPicture.width, picXLimit) ||
picXLimit > aBuffer.mPlanes[0].mStride ||
!AddOverflow32(aInfo.mPicture.y, aInfo.mPicture.height, picYLimit) ||
picYLimit > aBuffer.mPlanes[0].mHeight)
{
// The specified picture dimensions can't be contained inside the video
// frame, we'll stomp memory if we try to copy it. Fail.
NS_WARNING("Overflowing picture rect");
return nsnull;
}
nsAutoPtr<VideoData> v(new VideoData(aOffset, aTime, aEndTime, aKeyframe, aTimecode));
// Currently our decoder only knows how to output to PLANAR_YCBCR
// format.
Image::Format format = Image::PLANAR_YCBCR;
v->mImage = aContainer->CreateImage(&format, 1);
if (!v->mImage) {
return nsnull;
}
NS_ASSERTION(v->mImage->GetFormat() == Image::PLANAR_YCBCR,
"Wrong format?");
PlanarYCbCrImage* videoImage = static_cast<PlanarYCbCrImage*>(v->mImage.get());
PlanarYCbCrImage::Data data;
data.mYChannel = aBuffer.mPlanes[0].mData;
data.mYSize = gfxIntSize(aBuffer.mPlanes[0].mWidth, aBuffer.mPlanes[0].mHeight);
data.mYStride = aBuffer.mPlanes[0].mStride;
data.mCbChannel = aBuffer.mPlanes[1].mData;
data.mCrChannel = aBuffer.mPlanes[2].mData;
data.mCbCrSize = gfxIntSize(aBuffer.mPlanes[1].mWidth, aBuffer.mPlanes[1].mHeight);
data.mCbCrStride = aBuffer.mPlanes[1].mStride;
data.mPicX = aInfo.mPicture.x;
data.mPicY = aInfo.mPicture.y;
data.mPicSize = gfxIntSize(aInfo.mPicture.width, aInfo.mPicture.height);
videoImage->SetData(data); // Copies buffer
return v.forget();
}
nsBuiltinDecoderReader::nsBuiltinDecoderReader(nsBuiltinDecoder* aDecoder)
: mMonitor("media.decoderreader"),
mDecoder(aDecoder),
mDataOffset(0)
{
MOZ_COUNT_CTOR(nsBuiltinDecoderReader);
}
nsBuiltinDecoderReader::~nsBuiltinDecoderReader()
{
ResetDecode();
MOZ_COUNT_DTOR(nsBuiltinDecoderReader);
}
nsresult nsBuiltinDecoderReader::ResetDecode()
{
nsresult res = NS_OK;
mVideoQueue.Reset();
mAudioQueue.Reset();
return res;
}
nsresult nsBuiltinDecoderReader::GetBufferedBytes(nsTArray<ByteRange>& aRanges)
{
NS_ASSERTION(mDecoder->OnStateMachineThread(),
"Should be on state machine thread.");
mMonitor.AssertCurrentThreadIn();
PRInt64 startOffset = mDataOffset;
nsMediaStream* stream = mDecoder->GetCurrentStream();
while (PR_TRUE) {
PRInt64 endOffset = stream->GetCachedDataEnd(startOffset);
if (endOffset == startOffset) {
// Uncached at startOffset.
endOffset = stream->GetNextCachedData(startOffset);
if (endOffset == -1) {
// Uncached at startOffset until endOffset of stream, or we're at
// the end of stream.
break;
}
} else {
// Bytes [startOffset..endOffset] are cached.
PRInt64 startTime = -1;
PRInt64 endTime = -1;
if (NS_FAILED(ResetDecode())) {
return NS_ERROR_FAILURE;
}
FindStartTime(startOffset, startTime);
if (startTime != -1 &&
((endTime = FindEndTime(endOffset)) != -1))
{
NS_ASSERTION(startOffset < endOffset,
"Start offset must be before end offset");
NS_ASSERTION(startTime < endTime,
"Start time must be before end time");
aRanges.AppendElement(ByteRange(startOffset,
endOffset,
startTime,
endTime));
}
}
startOffset = endOffset;
}
if (NS_FAILED(ResetDecode())) {
return NS_ERROR_FAILURE;
}
return NS_OK;
}
ByteRange
nsBuiltinDecoderReader::GetSeekRange(const nsTArray<ByteRange>& ranges,
PRInt64 aTarget,
PRInt64 aStartTime,
PRInt64 aEndTime,
PRBool aExact)
{
NS_ASSERTION(mDecoder->OnStateMachineThread(),
"Should be on state machine thread.");
PRInt64 so = mDataOffset;
PRInt64 eo = mDecoder->GetCurrentStream()->GetLength();
PRInt64 st = aStartTime;
PRInt64 et = aEndTime;
for (PRUint32 i = 0; i < ranges.Length(); i++) {
const ByteRange &r = ranges[i];
if (r.mTimeStart < aTarget) {
so = r.mOffsetStart;
st = r.mTimeStart;
}
if (r.mTimeEnd >= aTarget && r.mTimeEnd < et) {
eo = r.mOffsetEnd;
et = r.mTimeEnd;
}
if (r.mTimeStart < aTarget && aTarget <= r.mTimeEnd) {
// Target lies exactly in this range.
return ranges[i];
}
}
return aExact ? ByteRange() : ByteRange(so, eo, st, et);
}
VideoData* nsBuiltinDecoderReader::FindStartTime(PRInt64 aOffset,
PRInt64& aOutStartTime)
{
NS_ASSERTION(mDecoder->OnStateMachineThread(), "Should be on state machine thread.");
if (NS_FAILED(ResetDecode())) {
return nsnull;
}
// Extract the start times of the bitstreams in order to calculate
// the duration.
PRInt64 videoStartTime = PR_INT64_MAX;
PRInt64 audioStartTime = PR_INT64_MAX;
VideoData* videoData = nsnull;
if (HasVideo()) {
videoData = DecodeToFirstData(&nsBuiltinDecoderReader::DecodeVideoFrame,
mVideoQueue);
if (videoData) {
videoStartTime = videoData->mTime;
}
}
if (HasAudio()) {
SoundData* soundData = DecodeToFirstData(&nsBuiltinDecoderReader::DecodeAudioData,
mAudioQueue);
if (soundData) {
audioStartTime = soundData->mTime;
}
}
PRInt64 startTime = PR_MIN(videoStartTime, audioStartTime);
if (startTime != PR_INT64_MAX) {
aOutStartTime = startTime;
}
return videoData;
}
PRInt64 nsBuiltinDecoderReader::FindEndTime(PRInt64 aEndOffset)
{
return -1;
}
template<class Data>
Data* nsBuiltinDecoderReader::DecodeToFirstData(DecodeFn aDecodeFn,
MediaQueue<Data>& aQueue)
{
PRBool eof = PR_FALSE;
while (!eof && aQueue.GetSize() == 0) {
{
MonitorAutoEnter decoderMon(mDecoder->GetMonitor());
if (mDecoder->GetDecodeState() == nsDecoderStateMachine::DECODER_STATE_SHUTDOWN) {
return nsnull;
}
}
eof = !(this->*aDecodeFn)();
}
Data* d = nsnull;
return (d = aQueue.PeekFront()) ? d : nsnull;
}
nsresult nsBuiltinDecoderReader::DecodeToTarget(PRInt64 aTarget)
{
// Decode forward to the target frame. Start with video, if we have it.
if (HasVideo()) {
PRBool eof = PR_FALSE;
PRInt64 startTime = -1;
while (HasVideo() && !eof) {
while (mVideoQueue.GetSize() == 0 && !eof) {
PRBool skip = PR_FALSE;
eof = !DecodeVideoFrame(skip, 0);
{
MonitorAutoExit exitReaderMon(mMonitor);
MonitorAutoEnter decoderMon(mDecoder->GetMonitor());
if (mDecoder->GetDecodeState() == nsBuiltinDecoderStateMachine::DECODER_STATE_SHUTDOWN) {
return NS_ERROR_FAILURE;
}
}
}
if (mVideoQueue.GetSize() == 0) {
break;
}
nsAutoPtr<VideoData> video(mVideoQueue.PeekFront());
// If the frame end time is less than the seek target, we won't want
// to display this frame after the seek, so discard it.
if (video && video->mEndTime < aTarget) {
if (startTime == -1) {
startTime = video->mTime;
}
mVideoQueue.PopFront();
video = nsnull;
} else {
video.forget();
break;
}
}
{
MonitorAutoExit exitReaderMon(mMonitor);
MonitorAutoEnter decoderMon(mDecoder->GetMonitor());
if (mDecoder->GetDecodeState() == nsBuiltinDecoderStateMachine::DECODER_STATE_SHUTDOWN) {
return NS_ERROR_FAILURE;
}
}
LOG(PR_LOG_DEBUG, ("First video frame after decode is %lld", startTime));
}
if (HasAudio()) {
// Decode audio forward to the seek target.
PRBool eof = PR_FALSE;
while (HasAudio() && !eof) {
while (!eof && mAudioQueue.GetSize() == 0) {
eof = !DecodeAudioData();
{
MonitorAutoExit exitReaderMon(mMonitor);
MonitorAutoEnter decoderMon(mDecoder->GetMonitor());
if (mDecoder->GetDecodeState() == nsBuiltinDecoderStateMachine::DECODER_STATE_SHUTDOWN) {
return NS_ERROR_FAILURE;
}
}
}
nsAutoPtr<SoundData> audio(mAudioQueue.PeekFront());
if (audio && audio->mTime + audio->mDuration <= aTarget) {
mAudioQueue.PopFront();
audio = nsnull;
} else {
audio.forget();
break;
}
}
}
return NS_OK;
}