gecko/modules/libjar/nsIZipReader.idl

280 lines
11 KiB
Plaintext

/* -*- Mode: IDL; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is Mozilla Communicator client code, released
* March 31, 1998.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Daniel Veditz <dveditz@netscape.com>
* Don Bragg <dbragg@netscape.com>
* Samir Gehani <sgehani@netscape.com>
* Mitch Stoltz <mstoltz@netscape.com>
* Jeff Walden <jwalden+code@mit.edu>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include "nsISupports.idl"
interface nsIUTF8StringEnumerator;
interface nsIInputStream;
interface nsIFile;
interface nsIPrincipal;
[scriptable, uuid(e1c028bc-c478-11da-95a8-00e08161165f)]
interface nsIZipEntry : nsISupports
{
/**
* The type of compression used for the item. The possible values and
* their meanings are defined in the zip file specification at
* http://www.pkware.com/business_and_developers/developer/appnote/
*/
readonly attribute unsigned short compression;
/**
* The compressed size of the data in the item.
*/
readonly attribute unsigned long size;
/**
* The uncompressed size of the data in the item.
*/
readonly attribute unsigned long realSize;
/**
* The CRC-32 hash of the file in the entry.
*/
readonly attribute unsigned long CRC32;
/**
* True if the name of the entry ends with '/' and false otherwise.
*/
readonly attribute boolean isDirectory;
/**
* The time at which this item was last modified.
*/
readonly attribute PRTime lastModifiedTime;
/**
* Use this attribute to determine whether this item is an actual zip entry
* or is one synthesized for part of a real entry's path. A synthesized
* entry represents a directory within the zip file which has no
* corresponding entry within the zip file. For example, the entry for the
* directory foo/ in a zip containing exactly one entry for foo/bar.txt
* is synthetic. If the zip file contains an actual entry for a directory,
* this attribute will be false for the nsIZipEntry for that directory.
* It is impossible for a file to be synthetic.
*/
readonly attribute boolean isSynthetic;
};
[scriptable, uuid(7bb925d6-833a-486c-8ef2-9bc15c670a60)]
interface nsIZipReader : nsISupports
{
/**
* Opens a zip file for reading.
* It is allowed to open with another file,
* but it needs to be closed first with close().
*/
void open(in nsIFile zipFile);
/**
* Opens a zip file inside a zip file for reading.
*/
void openInner(in nsIZipReader zipReader, in string zipEntry);
/**
* The file that represents the zip with which this zip reader was
* initialized.
*/
readonly attribute nsIFile file;
/**
* Closes a zip reader. Subsequent attempts to extract files or read from
* its input stream will result in an error.
*/
void close();
/**
* Tests the integrity of the archive by performing a CRC check
* on each item expanded into memory. If an entry is specified
* the integrity of only that item is tested. If NULL is passed
* in the integrity of all items in the archive are tested.
*/
void test(in string aEntryName);
/**
* Extracts a zip entry into a local file specified by outFile.
* The entry must be stored in the zip in either uncompressed or
* DEFLATE-compressed format for the extraction to be successful.
* If the entry is a directory, the directory will be extracted
* non-recursively.
*/
void extract(in string zipEntry, in nsIFile outFile);
/**
* Returns a nsIZipEntry describing a specified zip entry.
*/
nsIZipEntry getEntry(in string zipEntry);
/**
* Checks whether the zipfile contains an entry specified by entryName.
*/
boolean hasEntry(in AUTF8String zipEntry);
/**
* Returns a string enumerator containing the matching entry names.
*
* @param aPattern
* A regular expression used to find matching entries in the zip file.
* Set this parameter to null to get all entries; otherwise, use the
* following syntax:
*
* o * matches anything
* o ? matches one character
* o $ matches the end of the string
* o [abc] matches one occurrence of a, b, or c. The only character that
* must be escaped inside the brackets is ]. ^ and - must never
* appear in the first and second positions within the brackets,
* respectively. (In the former case, the behavior specified for
* '[^az]' will happen.)
* o [a-z] matches any character between a and z. The characters a and z
* must either both be letters or both be numbers, with the
* character represented by 'a' having a lower ASCII value than
* the character represented by 'z'.
* o [^az] matches any character except a or z. If ] is to appear inside
* the brackets as a character to not match, it must be escaped.
* o pat~pat2 returns matches to the pattern 'pat' which do not also match
* the pattern 'pat2'. This may be used to perform filtering
* upon the results of one pattern to remove all matches which
* also match another pattern. For example, because '*'
* matches any string and '*z*' matches any string containing a
* 'z', '*~*z*' will match all strings except those containing
* a 'z'. Note that a pattern may not use '~' multiple times,
* so a string such as '*~*z*~*y*' is not a valid pattern.
* o (foo|bar) will match either the pattern foo or the pattern bar.
* Neither of the patterns foo or bar may use the 'pat~pat2'
* syntax described immediately above.
* o \ will escape a special character. Escaping is required for all
* special characters unless otherwise specified.
* o All other characters match case-sensitively.
*
* An aPattern not conforming to this syntax has undefined behavior.
*
* @throws NS_ERROR_ILLEGAL_VALUE on many but not all invalid aPattern
* values.
*/
nsIUTF8StringEnumerator findEntries(in string aPattern);
/**
* Returns an input stream containing the contents of the specified zip
* entry.
* @param zipEntry the name of the entry to open the stream from
*/
nsIInputStream getInputStream(in string zipEntry);
/**
* Returns an input stream containing the contents of the specified zip
* entry. If the entry refers to a directory (ends with '/'), a directory stream
* is opened, otherwise the contents of the file entry is returned.
* @param aJarSpec the Spec of the URI for the JAR (only used for directory streams)
* @param zipEntry the name of the entry to open the stream from
*/
nsIInputStream getInputStreamWithSpec(in AUTF8String aJarSpec, in string zipEntry);
/**
* Returns an object describing the entity which signed
* an entry. parseManifest must be called first. If aEntryName is an
* entry in the jar, getInputStream must be called after parseManifest.
* If aEntryName is an external file which has meta-information
* stored in the jar, verifyExternalFile (not yet implemented) must
* be called before getPrincipal.
*/
nsIPrincipal getCertificatePrincipal(in string aEntryName);
readonly attribute PRUint32 manifestEntriesCount;
};
////////////////////////////////////////////////////////////////////////////////
// nsIZipReaderCache
[scriptable, uuid(52c45d86-0cc3-11d4-986e-00c04fa0cf4a)]
interface nsIZipReaderCache : nsISupports
{
/**
* Initializes a new zip reader cache.
* @param cacheSize - the number of released entries to maintain before
* beginning to throw some out (note that the number of outstanding
* entries can be much greater than this number -- this is the count
* for those otherwise unused entries)
*/
void init(in unsigned long cacheSize);
/**
* Returns a (possibly shared) nsIZipReader for an nsIFile.
*
* If the zip reader for given file is not in the cache, a new zip reader
* is created, initialized, and opened (see nsIZipReader::init and
* nsIZipReader::open). Otherwise the previously created zip reader is
* returned.
*
* @note If someone called close() on the shared nsIZipReader, this method
* will return the closed zip reader.
*/
nsIZipReader getZip(in nsIFile zipFile);
/**
* Returns a (possibly shared) nsIZipReader for a zip inside another zip
*
* See getZip
*/
nsIZipReader getInnerZip(in nsIFile zipFile, in string zipEntry);
};
////////////////////////////////////////////////////////////////////////////////
%{C++
#define NS_ZIPREADER_CID \
{ /* 7526a738-9632-11d3-8cd9-0060b0fc14a3 */ \
0x7526a738, \
0x9632, \
0x11d3, \
{0x8c, 0xd9, 0x00, 0x60, 0xb0, 0xfc, 0x14, 0xa3} \
}
#define NS_ZIPREADERCACHE_CID \
{ /* 1b117e16-0cad-11d4-986e-00c04fa0cf4a */ \
0x1b117e16, \
0x0cad, \
0x11d4, \
{0x98, 0x6e, 0x00, 0xc0, 0x4f, 0xa0, 0xcf, 0x4a} \
}
%}
////////////////////////////////////////////////////////////////////////////////