gecko/js/tests/ecma/Date/15.9.4.3.js

186 lines
5.9 KiB
JavaScript

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is Mozilla Communicator client code, released
* March 31, 1998.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
gTestfile = '15.9.4.3.js';
var SECTION = "15.9.4.3";
var TITLE = "Date.UTC( year, month, date, hours, minutes, seconds, ms )";
// Dates around 1970
addNewTestCase( Date.UTC( 1970,0,1,0,0,0,0),
"Date.UTC( 1970,0,1,0,0,0,0)",
utc(1970,0,1,0,0,0,0) );
addNewTestCase( Date.UTC( 1969,11,31,23,59,59,999),
"Date.UTC( 1969,11,31,23,59,59,999)",
utc(1969,11,31,23,59,59,999) );
addNewTestCase( Date.UTC( 1972,1,29,23,59,59,999),
"Date.UTC( 1972,1,29,23,59,59,999)",
utc(1972,1,29,23,59,59,999) );
addNewTestCase( Date.UTC( 1972,2,1,23,59,59,999),
"Date.UTC( 1972,2,1,23,59,59,999)",
utc(1972,2,1,23,59,59,999) );
addNewTestCase( Date.UTC( 1968,1,29,23,59,59,999),
"Date.UTC( 1968,1,29,23,59,59,999)",
utc(1968,1,29,23,59,59,999) );
addNewTestCase( Date.UTC( 1968,2,1,23,59,59,999),
"Date.UTC( 1968,2,1,23,59,59,999)",
utc(1968,2,1,23,59,59,999) );
addNewTestCase( Date.UTC( 1969,0,1,0,0,0,0),
"Date.UTC( 1969,0,1,0,0,0,0)",
utc(1969,0,1,0,0,0,0) );
addNewTestCase( Date.UTC( 1969,11,31,23,59,59,1000),
"Date.UTC( 1969,11,31,23,59,59,1000)",
utc(1970,0,1,0,0,0,0) );
addNewTestCase( Date.UTC( 1969,Number.NaN,31,23,59,59,999),
"Date.UTC( 1969,Number.NaN,31,23,59,59,999)",
utc(1969,Number.NaN,31,23,59,59,999) );
// Dates around 2000
addNewTestCase( Date.UTC( 1999,11,31,23,59,59,999),
"Date.UTC( 1999,11,31,23,59,59,999)",
utc(1999,11,31,23,59,59,999) );
addNewTestCase( Date.UTC( 2000,0,1,0,0,0,0),
"Date.UTC( 2000,0,1,0,0,0,0)",
utc(2000,0,1,0,0,0,0) );
// Dates around 1900
addNewTestCase( Date.UTC( 1899,11,31,23,59,59,999),
"Date.UTC( 1899,11,31,23,59,59,999)",
utc(1899,11,31,23,59,59,999) );
addNewTestCase( Date.UTC( 1900,0,1,0,0,0,0),
"Date.UTC( 1900,0,1,0,0,0,0)",
utc(1900,0,1,0,0,0,0) );
addNewTestCase( Date.UTC( 1973,0,1,0,0,0,0),
"Date.UTC( 1973,0,1,0,0,0,0)",
utc(1973,0,1,0,0,0,0) );
addNewTestCase( Date.UTC( 1776,6,4,12,36,13,111),
"Date.UTC( 1776,6,4,12,36,13,111)",
utc(1776,6,4,12,36,13,111) );
addNewTestCase( Date.UTC( 2525,9,18,15,30,1,123),
"Date.UTC( 2525,9,18,15,30,1,123)",
utc(2525,9,18,15,30,1,123) );
// Dates around 29 Feb 2000
addNewTestCase( Date.UTC( 2000,1,29,0,0,0,0 ),
"Date.UTC( 2000,1,29,0,0,0,0 )",
utc(2000,1,29,0,0,0,0) );
addNewTestCase( Date.UTC( 2000,1,29,8,0,0,0 ),
"Date.UTC( 2000,1,29,8,0,0,0 )",
utc(2000,1,29,8,0,0,0) );
// Dates around 1 Jan 2005
addNewTestCase( Date.UTC( 2005,0,1,0,0,0,0 ),
"Date.UTC( 2005,0,1,0,0,0,0 )",
utc(2005,0,1,0,0,0,0) );
addNewTestCase( Date.UTC( 2004,11,31,16,0,0,0 ),
"Date.UTC( 2004,11,31,16,0,0,0 )",
utc(2004,11,31,16,0,0,0) );
test();
function addNewTestCase( DateCase, DateString, ExpectDate) {
DateCase = DateCase;
new TestCase( SECTION, DateString, ExpectDate.value, DateCase );
new TestCase( SECTION, DateString, ExpectDate.value, DateCase );
}
function MyDate() {
this.year = 0;
this.month = 0;
this.date = 0;
this.hours = 0;
this.minutes = 0;
this.seconds = 0;
this.ms = 0;
}
function utc( year, month, date, hours, minutes, seconds, ms ) {
d = new MyDate();
d.year = Number(year);
if (month)
d.month = Number(month);
if (date)
d.date = Number(date);
if (hours)
d.hours = Number(hours);
if (minutes)
d.minutes = Number(minutes);
if (seconds)
d.seconds = Number(seconds);
if (ms)
d.ms = Number(ms);
if ( isNaN(d.year) && 0 <= ToInteger(d.year) && d.year <= 99 ) {
d.year = 1900 + ToInteger(d.year);
}
if (isNaN(month) || isNaN(year) || isNaN(date) || isNaN(hours) ||
isNaN(minutes) || isNaN(seconds) || isNaN(ms) ) {
d.year = Number.NaN;
d.month = Number.NaN;
d.date = Number.NaN;
d.hours = Number.NaN;
d.minutes = Number.NaN;
d.seconds = Number.NaN;
d.ms = Number.NaN;
d.value = Number.NaN;
d.time = Number.NaN;
d.day =Number.NaN;
return d;
}
d.day = MakeDay( d.year, d.month, d.date );
d.time = MakeTime( d.hours, d.minutes, d.seconds, d.ms );
d.value = (TimeClip( MakeDate(d.day,d.time)));
return d;
}
function UTCTime( t ) {
sign = ( t < 0 ) ? -1 : 1;
return ( (t +(TZ_DIFF*msPerHour)) );
}