gecko/netwerk/protocol/http/SpdyStream2.cpp

912 lines
31 KiB
C++

/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set sw=2 ts=8 et tw=80 : */
/* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */
#include "nsHttp.h"
#include "SpdySession2.h"
#include "SpdyStream2.h"
#include "nsAlgorithm.h"
#include "prnetdb.h"
#include "nsHttpRequestHead.h"
#include "mozilla/Telemetry.h"
#include "nsISocketTransport.h"
#include "nsISupportsPriority.h"
#include "nsHttpHandler.h"
#ifdef DEBUG
// defined by the socket transport service while active
extern PRThread *gSocketThread;
#endif
namespace mozilla {
namespace net {
SpdyStream2::SpdyStream2(nsAHttpTransaction *httpTransaction,
SpdySession2 *spdySession,
nsISocketTransport *socketTransport,
uint32_t chunkSize,
z_stream *compressionContext,
int32_t priority)
: mUpstreamState(GENERATING_SYN_STREAM),
mTransaction(httpTransaction),
mSession(spdySession),
mSocketTransport(socketTransport),
mSegmentReader(nullptr),
mSegmentWriter(nullptr),
mStreamID(0),
mChunkSize(chunkSize),
mSynFrameComplete(0),
mRequestBlockedOnRead(0),
mSentFinOnData(0),
mRecvdFin(0),
mFullyOpen(0),
mSentWaitingFor(0),
mSetTCPSocketBuffer(0),
mTxInlineFrameSize(SpdySession2::kDefaultBufferSize),
mTxInlineFrameUsed(0),
mTxStreamFrameSize(0),
mZlib(compressionContext),
mRequestBodyLenRemaining(0),
mPriority(priority),
mTotalSent(0),
mTotalRead(0)
{
NS_ABORT_IF_FALSE(PR_GetCurrentThread() == gSocketThread, "wrong thread");
LOG3(("SpdyStream2::SpdyStream2 %p", this));
mTxInlineFrame = new char[mTxInlineFrameSize];
}
SpdyStream2::~SpdyStream2()
{
mStreamID = SpdySession2::kDeadStreamID;
}
// ReadSegments() is used to write data down the socket. Generally, HTTP
// request data is pulled from the approriate transaction and
// converted to SPDY data. Sometimes control data like a window-update is
// generated instead.
nsresult
SpdyStream2::ReadSegments(nsAHttpSegmentReader *reader,
uint32_t count,
uint32_t *countRead)
{
LOG3(("SpdyStream2 %p ReadSegments reader=%p count=%d state=%x",
this, reader, count, mUpstreamState));
NS_ABORT_IF_FALSE(PR_GetCurrentThread() == gSocketThread, "wrong thread");
nsresult rv = NS_ERROR_UNEXPECTED;
mRequestBlockedOnRead = 0;
switch (mUpstreamState) {
case GENERATING_SYN_STREAM:
case GENERATING_REQUEST_BODY:
case SENDING_REQUEST_BODY:
// Call into the HTTP Transaction to generate the HTTP request
// stream. That stream will show up in OnReadSegment().
mSegmentReader = reader;
rv = mTransaction->ReadSegments(this, count, countRead);
mSegmentReader = nullptr;
// Check to see if the transaction's request could be written out now.
// If not, mark the stream for callback when writing can proceed.
if (NS_SUCCEEDED(rv) &&
mUpstreamState == GENERATING_SYN_STREAM &&
!mSynFrameComplete)
mSession->TransactionHasDataToWrite(this);
// mTxinlineFrameUsed represents any queued un-sent frame. It might
// be 0 if there is no such frame, which is not a gurantee that we
// don't have more request body to send - just that any data that was
// sent comprised a complete SPDY frame. Likewise, a non 0 value is
// a queued, but complete, spdy frame length.
// Mark that we are blocked on read if the http transaction needs to
// provide more of the request message body and there is nothing queued
// for writing
if (rv == NS_BASE_STREAM_WOULD_BLOCK && !mTxInlineFrameUsed)
mRequestBlockedOnRead = 1;
if (!mTxInlineFrameUsed && NS_SUCCEEDED(rv) && (!*countRead)) {
LOG3(("ReadSegments %p: Sending request data complete, mUpstreamState=%x",
this, mUpstreamState));
if (mSentFinOnData) {
ChangeState(UPSTREAM_COMPLETE);
}
else {
GenerateDataFrameHeader(0, true);
ChangeState(SENDING_FIN_STREAM);
mSession->TransactionHasDataToWrite(this);
rv = NS_BASE_STREAM_WOULD_BLOCK;
}
}
break;
case SENDING_SYN_STREAM:
// We were trying to send the SYN-STREAM but were blocked from trying
// to transmit it the first time(s).
mSegmentReader = reader;
rv = TransmitFrame(nullptr, nullptr);
mSegmentReader = nullptr;
*countRead = 0;
if (NS_SUCCEEDED(rv)) {
NS_ABORT_IF_FALSE(!mTxInlineFrameUsed,
"Transmit Frame should be all or nothing");
if (mSentFinOnData) {
ChangeState(UPSTREAM_COMPLETE);
rv = NS_OK;
}
else {
rv = NS_BASE_STREAM_WOULD_BLOCK;
ChangeState(GENERATING_REQUEST_BODY);
mSession->TransactionHasDataToWrite(this);
}
}
break;
case SENDING_FIN_STREAM:
// We were trying to send the FIN-STREAM but were blocked from
// sending it out - try again.
if (!mSentFinOnData) {
mSegmentReader = reader;
rv = TransmitFrame(nullptr, nullptr);
mSegmentReader = nullptr;
NS_ABORT_IF_FALSE(NS_FAILED(rv) || !mTxInlineFrameUsed,
"Transmit Frame should be all or nothing");
if (NS_SUCCEEDED(rv))
ChangeState(UPSTREAM_COMPLETE);
}
else {
rv = NS_OK;
mTxInlineFrameUsed = 0; // cancel fin data packet
ChangeState(UPSTREAM_COMPLETE);
}
*countRead = 0;
// don't change OK to WOULD BLOCK. we are really done sending if OK
break;
case UPSTREAM_COMPLETE:
*countRead = 0;
rv = NS_OK;
break;
default:
NS_ABORT_IF_FALSE(false, "SpdyStream2::ReadSegments unknown state");
break;
}
return rv;
}
// WriteSegments() is used to read data off the socket. Generally this is
// just the SPDY frame header and from there the appropriate SPDYStream
// is identified from the Stream-ID. The http transaction associated with
// that read then pulls in the data directly.
nsresult
SpdyStream2::WriteSegments(nsAHttpSegmentWriter *writer,
uint32_t count,
uint32_t *countWritten)
{
LOG3(("SpdyStream2::WriteSegments %p count=%d state=%x",
this, count, mUpstreamState));
NS_ABORT_IF_FALSE(PR_GetCurrentThread() == gSocketThread, "wrong thread");
NS_ABORT_IF_FALSE(!mSegmentWriter, "segment writer in progress");
mSegmentWriter = writer;
nsresult rv = mTransaction->WriteSegments(writer, count, countWritten);
mSegmentWriter = nullptr;
return rv;
}
PLDHashOperator
SpdyStream2::hdrHashEnumerate(const nsACString &key,
nsAutoPtr<nsCString> &value,
void *closure)
{
SpdyStream2 *self = static_cast<SpdyStream2 *>(closure);
self->CompressToFrame(key);
self->CompressToFrame(value.get());
return PL_DHASH_NEXT;
}
nsresult
SpdyStream2::ParseHttpRequestHeaders(const char *buf,
uint32_t avail,
uint32_t *countUsed)
{
// Returns NS_OK even if the headers are incomplete
// set mSynFrameComplete flag if they are complete
NS_ABORT_IF_FALSE(PR_GetCurrentThread() == gSocketThread, "wrong thread");
NS_ABORT_IF_FALSE(mUpstreamState == GENERATING_SYN_STREAM, "wrong state");
LOG3(("SpdyStream2::ParseHttpRequestHeaders %p avail=%d state=%x",
this, avail, mUpstreamState));
mFlatHttpRequestHeaders.Append(buf, avail);
// We can use the simple double crlf because firefox is the
// only client we are parsing
int32_t endHeader = mFlatHttpRequestHeaders.Find("\r\n\r\n");
if (endHeader == kNotFound) {
// We don't have all the headers yet
LOG3(("SpdyStream2::ParseHttpRequestHeaders %p "
"Need more header bytes. Len = %d",
this, mFlatHttpRequestHeaders.Length()));
*countUsed = avail;
return NS_OK;
}
// We have recvd all the headers, trim the local
// buffer of the final empty line, and set countUsed to reflect
// the whole header has been consumed.
uint32_t oldLen = mFlatHttpRequestHeaders.Length();
mFlatHttpRequestHeaders.SetLength(endHeader + 2);
*countUsed = avail - (oldLen - endHeader) + 4;
mSynFrameComplete = 1;
// It is now OK to assign a streamID that we are assured will
// be monotonically increasing amongst syn-streams on this
// session
mStreamID = mSession->RegisterStreamID(this);
NS_ABORT_IF_FALSE(mStreamID & 1,
"Spdy Stream Channel ID must be odd");
if (mStreamID >= 0x80000000) {
// streamID must fit in 31 bits. This is theoretically possible
// because stream ID assignment is asynchronous to stream creation
// because of the protocol requirement that the ID in syn-stream
// be monotonically increasing. In reality this is really not possible
// because new streams stop being added to a session with 0x10000000 / 2
// IDs still available and no race condition is going to bridge that gap,
// so we can be comfortable on just erroring out for correctness in that
// case.
LOG3(("Stream assigned out of range ID: 0x%X", mStreamID));
return NS_ERROR_UNEXPECTED;
}
// Now we need to convert the flat http headers into a set
// of SPDY headers.. writing to mTxInlineFrame{sz}
mTxInlineFrame[0] = SpdySession2::kFlag_Control;
mTxInlineFrame[1] = 2; /* version */
mTxInlineFrame[2] = 0;
mTxInlineFrame[3] = SpdySession2::CONTROL_TYPE_SYN_STREAM;
// 4 to 7 are length and flags, we'll fill that in later
uint32_t networkOrderID = PR_htonl(mStreamID);
memcpy(mTxInlineFrame + 8, &networkOrderID, 4);
// this is the associated-to field, which is not used sending
// from the client in the http binding
memset (mTxInlineFrame + 12, 0, 4);
// Priority flags are the C0 mask of byte 16.
//
// The other 6 bits of 16 are unused. Spdy/3 will expand
// priority to 3 bits.
//
// When Spdy/3 implements WINDOW_UPDATE the lowest priority
// streams over a threshold (32?) should be given tiny
// receive windows, separate from their spdy priority
//
if (mPriority >= nsISupportsPriority::PRIORITY_LOW)
mTxInlineFrame[16] = SpdySession2::kPri03;
else if (mPriority >= nsISupportsPriority::PRIORITY_NORMAL)
mTxInlineFrame[16] = SpdySession2::kPri02;
else if (mPriority >= nsISupportsPriority::PRIORITY_HIGH)
mTxInlineFrame[16] = SpdySession2::kPri01;
else
mTxInlineFrame[16] = SpdySession2::kPri00;
mTxInlineFrame[17] = 0; /* unused */
const char *methodHeader = mTransaction->RequestHead()->Method().get();
nsCString hostHeader;
mTransaction->RequestHead()->GetHeader(nsHttp::Host, hostHeader);
nsCString versionHeader;
if (mTransaction->RequestHead()->Version() == NS_HTTP_VERSION_1_1)
versionHeader = NS_LITERAL_CSTRING("HTTP/1.1");
else
versionHeader = NS_LITERAL_CSTRING("HTTP/1.0");
nsClassHashtable<nsCStringHashKey, nsCString> hdrHash;
// use mRequestHead() to get a sense of how big to make the hash,
// even though we are parsing the actual text stream because
// it is legit to append headers.
hdrHash.Init(1 + (mTransaction->RequestHead()->Headers().Count() * 2));
const char *beginBuffer = mFlatHttpRequestHeaders.BeginReading();
// need to hash all the headers together to remove duplicates, special
// headers, etc..
int32_t crlfIndex = mFlatHttpRequestHeaders.Find("\r\n");
while (true) {
int32_t startIndex = crlfIndex + 2;
crlfIndex = mFlatHttpRequestHeaders.Find("\r\n", false, startIndex);
if (crlfIndex == -1)
break;
int32_t colonIndex = mFlatHttpRequestHeaders.Find(":", false, startIndex,
crlfIndex - startIndex);
if (colonIndex == -1)
break;
nsDependentCSubstring name = Substring(beginBuffer + startIndex,
beginBuffer + colonIndex);
// all header names are lower case in spdy
ToLowerCase(name);
if (name.Equals("method") ||
name.Equals("version") ||
name.Equals("scheme") ||
name.Equals("keep-alive") ||
name.Equals("accept-encoding") ||
name.Equals("te") ||
name.Equals("connection") ||
name.Equals("url"))
continue;
nsCString *val = hdrHash.Get(name);
if (!val) {
val = new nsCString();
hdrHash.Put(name, val);
}
int32_t valueIndex = colonIndex + 1;
while (valueIndex < crlfIndex && beginBuffer[valueIndex] == ' ')
++valueIndex;
nsDependentCSubstring v = Substring(beginBuffer + valueIndex,
beginBuffer + crlfIndex);
if (!val->IsEmpty())
val->Append(static_cast<char>(0));
val->Append(v);
if (name.Equals("content-length")) {
int64_t len;
if (nsHttp::ParseInt64(val->get(), nullptr, &len))
mRequestBodyLenRemaining = len;
}
}
mTxInlineFrameUsed = 18;
// Do not naively log the request headers here beacuse they might
// contain auth. The http transaction already logs the sanitized request
// headers at this same level so it is not necessary to do so here.
// The header block length
uint16_t count = hdrHash.Count() + 4; /* method, scheme, url, version */
CompressToFrame(count);
// method, scheme, url, and version headers for request line
CompressToFrame(NS_LITERAL_CSTRING("method"));
CompressToFrame(methodHeader, strlen(methodHeader));
CompressToFrame(NS_LITERAL_CSTRING("scheme"));
CompressToFrame(NS_LITERAL_CSTRING("https"));
CompressToFrame(NS_LITERAL_CSTRING("url"));
CompressToFrame(mTransaction->RequestHead()->RequestURI());
CompressToFrame(NS_LITERAL_CSTRING("version"));
CompressToFrame(versionHeader);
hdrHash.Enumerate(hdrHashEnumerate, this);
CompressFlushFrame();
// 4 to 7 are length and flags, which we can now fill in
(reinterpret_cast<uint32_t *>(mTxInlineFrame.get()))[1] =
PR_htonl(mTxInlineFrameUsed - 8);
NS_ABORT_IF_FALSE(!mTxInlineFrame[4],
"Size greater than 24 bits");
// Determine whether to put the fin bit on the syn stream frame or whether
// to wait for a data packet to put it on.
if (mTransaction->RequestHead()->Method() == nsHttp::Get ||
mTransaction->RequestHead()->Method() == nsHttp::Connect ||
mTransaction->RequestHead()->Method() == nsHttp::Head) {
// for GET, CONNECT, and HEAD place the fin bit right on the
// syn stream packet
mSentFinOnData = 1;
mTxInlineFrame[4] = SpdySession2::kFlag_Data_FIN;
}
else if (mTransaction->RequestHead()->Method() == nsHttp::Post ||
mTransaction->RequestHead()->Method() == nsHttp::Put ||
mTransaction->RequestHead()->Method() == nsHttp::Options) {
// place fin in a data frame even for 0 length messages, I've seen
// the google gateway be unhappy with fin-on-syn for 0 length POST
}
else if (!mRequestBodyLenRemaining) {
// for other HTTP extension methods, rely on the content-length
// to determine whether or not to put fin on syn
mSentFinOnData = 1;
mTxInlineFrame[4] = SpdySession2::kFlag_Data_FIN;
}
Telemetry::Accumulate(Telemetry::SPDY_SYN_SIZE, mTxInlineFrameUsed - 18);
// The size of the input headers is approximate
uint32_t ratio =
(mTxInlineFrameUsed - 18) * 100 /
(11 + mTransaction->RequestHead()->RequestURI().Length() +
mFlatHttpRequestHeaders.Length());
Telemetry::Accumulate(Telemetry::SPDY_SYN_RATIO, ratio);
return NS_OK;
}
void
SpdyStream2::UpdateTransportReadEvents(uint32_t count)
{
mTotalRead += count;
mTransaction->OnTransportStatus(mSocketTransport,
NS_NET_STATUS_RECEIVING_FROM,
mTotalRead);
}
void
SpdyStream2::UpdateTransportSendEvents(uint32_t count)
{
mTotalSent += count;
// normally on non-windows platform we use TCP autotuning for
// the socket buffers, and this works well (managing enough
// buffers for BDP while conserving memory) for HTTP even when
// it creates really deep queues. However this 'buffer bloat' is
// a problem for spdy because it ruins the low latency properties
// necessary for PING and cancel to work meaningfully.
//
// If this stream represents a large upload, disable autotuning for
// the session and cap the send buffers by default at 128KB.
// (10Mbit/sec @ 100ms)
//
uint32_t bufferSize = gHttpHandler->SpdySendBufferSize();
if ((mTotalSent > bufferSize) && !mSetTCPSocketBuffer) {
mSetTCPSocketBuffer = 1;
mSocketTransport->SetSendBufferSize(bufferSize);
}
if (mUpstreamState != SENDING_FIN_STREAM)
mTransaction->OnTransportStatus(mSocketTransport,
NS_NET_STATUS_SENDING_TO,
mTotalSent);
if (!mSentWaitingFor && !mRequestBodyLenRemaining) {
mSentWaitingFor = 1;
mTransaction->OnTransportStatus(mSocketTransport,
NS_NET_STATUS_WAITING_FOR,
0);
}
}
nsresult
SpdyStream2::TransmitFrame(const char *buf,
uint32_t *countUsed)
{
// If TransmitFrame returns SUCCESS than all the data is sent (or at least
// buffered at the session level), if it returns WOULD_BLOCK then none of
// the data is sent.
// You can call this function with no data and no out parameter in order to
// flush internal buffers that were previously blocked on writing. You can
// of course feed new data to it as well.
NS_ABORT_IF_FALSE(mTxInlineFrameUsed, "empty stream frame in transmit");
NS_ABORT_IF_FALSE(mSegmentReader, "TransmitFrame with null mSegmentReader");
NS_ABORT_IF_FALSE((buf && countUsed) || (!buf && !countUsed),
"TransmitFrame arguments inconsistent");
uint32_t transmittedCount;
nsresult rv;
LOG3(("SpdyStream2::TransmitFrame %p inline=%d stream=%d",
this, mTxInlineFrameUsed, mTxStreamFrameSize));
if (countUsed)
*countUsed = 0;
// In the (relatively common) event that we have a small amount of data
// split between the inlineframe and the streamframe, then move the stream
// data into the inlineframe via copy in order to coalesce into one write.
// Given the interaction with ssl this is worth the small copy cost.
if (mTxStreamFrameSize && mTxInlineFrameUsed &&
mTxStreamFrameSize < SpdySession2::kDefaultBufferSize &&
mTxInlineFrameUsed + mTxStreamFrameSize < mTxInlineFrameSize) {
LOG3(("Coalesce Transmit"));
memcpy (mTxInlineFrame + mTxInlineFrameUsed,
buf, mTxStreamFrameSize);
if (countUsed)
*countUsed += mTxStreamFrameSize;
mTxInlineFrameUsed += mTxStreamFrameSize;
mTxStreamFrameSize = 0;
}
rv = mSegmentReader->CommitToSegmentSize(mTxStreamFrameSize +
mTxInlineFrameUsed);
if (rv == NS_BASE_STREAM_WOULD_BLOCK)
mSession->TransactionHasDataToWrite(this);
if (NS_FAILED(rv)) // this will include WOULD_BLOCK
return rv;
// This function calls mSegmentReader->OnReadSegment to report the actual SPDY
// bytes through to the SpdySession2 and then the HttpConnection which calls
// the socket write function. It will accept all of the inline and stream
// data because of the above 'commitment' even if it has to buffer
rv = mSegmentReader->OnReadSegment(mTxInlineFrame, mTxInlineFrameUsed,
&transmittedCount);
LOG3(("SpdyStream2::TransmitFrame for inline session=%p "
"stream=%p result %x len=%d",
mSession, this, rv, transmittedCount));
NS_ABORT_IF_FALSE(rv != NS_BASE_STREAM_WOULD_BLOCK,
"inconsistent inline commitment result");
if (NS_FAILED(rv))
return rv;
NS_ABORT_IF_FALSE(transmittedCount == mTxInlineFrameUsed,
"inconsistent inline commitment count");
SpdySession2::LogIO(mSession, this, "Writing from Inline Buffer",
mTxInlineFrame, transmittedCount);
if (mTxStreamFrameSize) {
if (!buf) {
// this cannot happen
NS_ABORT_IF_FALSE(false, "Stream transmit with null buf argument to "
"TransmitFrame()");
LOG(("Stream transmit with null buf argument to TransmitFrame()\n"));
return NS_ERROR_UNEXPECTED;
}
rv = mSegmentReader->OnReadSegment(buf, mTxStreamFrameSize,
&transmittedCount);
LOG3(("SpdyStream2::TransmitFrame for regular session=%p "
"stream=%p result %x len=%d",
mSession, this, rv, transmittedCount));
NS_ABORT_IF_FALSE(rv != NS_BASE_STREAM_WOULD_BLOCK,
"inconsistent stream commitment result");
if (NS_FAILED(rv))
return rv;
NS_ABORT_IF_FALSE(transmittedCount == mTxStreamFrameSize,
"inconsistent stream commitment count");
SpdySession2::LogIO(mSession, this, "Writing from Transaction Buffer",
buf, transmittedCount);
*countUsed += mTxStreamFrameSize;
}
// calling this will trigger waiting_for if mRequestBodyLenRemaining is 0
UpdateTransportSendEvents(mTxInlineFrameUsed + mTxStreamFrameSize);
mTxInlineFrameUsed = 0;
mTxStreamFrameSize = 0;
return NS_OK;
}
void
SpdyStream2::ChangeState(enum stateType newState)
{
LOG3(("SpdyStream2::ChangeState() %p from %X to %X",
this, mUpstreamState, newState));
mUpstreamState = newState;
return;
}
void
SpdyStream2::GenerateDataFrameHeader(uint32_t dataLength, bool lastFrame)
{
LOG3(("SpdyStream2::GenerateDataFrameHeader %p len=%d last=%d",
this, dataLength, lastFrame));
NS_ABORT_IF_FALSE(PR_GetCurrentThread() == gSocketThread, "wrong thread");
NS_ABORT_IF_FALSE(!mTxInlineFrameUsed, "inline frame not empty");
NS_ABORT_IF_FALSE(!mTxStreamFrameSize, "stream frame not empty");
NS_ABORT_IF_FALSE(!(dataLength & 0xff000000), "datalength > 24 bits");
(reinterpret_cast<uint32_t *>(mTxInlineFrame.get()))[0] = PR_htonl(mStreamID);
(reinterpret_cast<uint32_t *>(mTxInlineFrame.get()))[1] =
PR_htonl(dataLength);
NS_ABORT_IF_FALSE(!(mTxInlineFrame[0] & 0x80),
"control bit set unexpectedly");
NS_ABORT_IF_FALSE(!mTxInlineFrame[4], "flag bits set unexpectedly");
mTxInlineFrameUsed = 8;
mTxStreamFrameSize = dataLength;
if (lastFrame) {
mTxInlineFrame[4] |= SpdySession2::kFlag_Data_FIN;
if (dataLength)
mSentFinOnData = 1;
}
}
void
SpdyStream2::CompressToFrame(const nsACString &str)
{
CompressToFrame(str.BeginReading(), str.Length());
}
void
SpdyStream2::CompressToFrame(const nsACString *str)
{
CompressToFrame(str->BeginReading(), str->Length());
}
// Dictionary taken from
// http://dev.chromium.org/spdy/spdy-protocol/spdy-protocol-draft2
// Name/Value Header Block Format
// spec indicates that the compression dictionary is not null terminated
// but in reality it is. see:
// https://groups.google.com/forum/#!topic/spdy-dev/2pWxxOZEIcs
const char *SpdyStream2::kDictionary =
"optionsgetheadpostputdeletetraceacceptaccept-charsetaccept-encodingaccept-"
"languageauthorizationexpectfromhostif-modified-sinceif-matchif-none-matchi"
"f-rangeif-unmodifiedsincemax-forwardsproxy-authorizationrangerefererteuser"
"-agent10010120020120220320420520630030130230330430530630740040140240340440"
"5406407408409410411412413414415416417500501502503504505accept-rangesageeta"
"glocationproxy-authenticatepublicretry-afterservervarywarningwww-authentic"
"ateallowcontent-basecontent-encodingcache-controlconnectiondatetrailertran"
"sfer-encodingupgradeviawarningcontent-languagecontent-lengthcontent-locati"
"oncontent-md5content-rangecontent-typeetagexpireslast-modifiedset-cookieMo"
"ndayTuesdayWednesdayThursdayFridaySaturdaySundayJanFebMarAprMayJunJulAugSe"
"pOctNovDecchunkedtext/htmlimage/pngimage/jpgimage/gifapplication/xmlapplic"
"ation/xhtmltext/plainpublicmax-agecharset=iso-8859-1utf-8gzipdeflateHTTP/1"
".1statusversionurl";
// use for zlib data types
void *
SpdyStream2::zlib_allocator(void *opaque, uInt items, uInt size)
{
return moz_xmalloc(items * size);
}
// use for zlib data types
void
SpdyStream2::zlib_destructor(void *opaque, void *addr)
{
moz_free(addr);
}
void
SpdyStream2::ExecuteCompress(uint32_t flushMode)
{
// Expect mZlib->avail_in and mZlib->next_in to be set.
// Append the compressed version of next_in to mTxInlineFrame
do
{
uint32_t avail = mTxInlineFrameSize - mTxInlineFrameUsed;
if (avail < 1) {
SpdySession2::EnsureBuffer(mTxInlineFrame,
mTxInlineFrameSize + 2000,
mTxInlineFrameUsed,
mTxInlineFrameSize);
avail = mTxInlineFrameSize - mTxInlineFrameUsed;
}
mZlib->next_out = reinterpret_cast<unsigned char *> (mTxInlineFrame.get()) +
mTxInlineFrameUsed;
mZlib->avail_out = avail;
deflate(mZlib, flushMode);
mTxInlineFrameUsed += avail - mZlib->avail_out;
} while (mZlib->avail_in > 0 || !mZlib->avail_out);
}
void
SpdyStream2::CompressToFrame(uint16_t data)
{
// convert the data to network byte order and write that
// to the compressed stream
data = PR_htons(data);
mZlib->next_in = reinterpret_cast<unsigned char *> (&data);
mZlib->avail_in = 2;
ExecuteCompress(Z_NO_FLUSH);
}
void
SpdyStream2::CompressToFrame(const char *data, uint32_t len)
{
// Format calls for a network ordered 16 bit length
// followed by the utf8 string
// for now, silently truncate headers greater than 64KB. Spdy/3 will
// fix this by making the len a 32 bit quantity
if (len > 0xffff)
len = 0xffff;
uint16_t networkLen = PR_htons(len);
// write out the length
mZlib->next_in = reinterpret_cast<unsigned char *> (&networkLen);
mZlib->avail_in = 2;
ExecuteCompress(Z_NO_FLUSH);
// write out the data
mZlib->next_in = (unsigned char *)data;
mZlib->avail_in = len;
ExecuteCompress(Z_NO_FLUSH);
}
void
SpdyStream2::CompressFlushFrame()
{
mZlib->next_in = (unsigned char *) "";
mZlib->avail_in = 0;
ExecuteCompress(Z_SYNC_FLUSH);
}
void
SpdyStream2::Close(nsresult reason)
{
mTransaction->Close(reason);
}
//-----------------------------------------------------------------------------
// nsAHttpSegmentReader
//-----------------------------------------------------------------------------
nsresult
SpdyStream2::OnReadSegment(const char *buf,
uint32_t count,
uint32_t *countRead)
{
LOG3(("SpdyStream2::OnReadSegment %p count=%d state=%x",
this, count, mUpstreamState));
NS_ABORT_IF_FALSE(PR_GetCurrentThread() == gSocketThread, "wrong thread");
NS_ABORT_IF_FALSE(mSegmentReader, "OnReadSegment with null mSegmentReader");
nsresult rv = NS_ERROR_UNEXPECTED;
uint32_t dataLength;
switch (mUpstreamState) {
case GENERATING_SYN_STREAM:
// The buffer is the HTTP request stream, including at least part of the
// HTTP request header. This state's job is to build a SYN_STREAM frame
// from the header information. count is the number of http bytes available
// (which may include more than the header), and in countRead we return
// the number of those bytes that we consume (i.e. the portion that are
// header bytes)
rv = ParseHttpRequestHeaders(buf, count, countRead);
if (NS_FAILED(rv))
return rv;
LOG3(("ParseHttpRequestHeaders %p used %d of %d. complete = %d",
this, *countRead, count, mSynFrameComplete));
if (mSynFrameComplete) {
NS_ABORT_IF_FALSE(mTxInlineFrameUsed,
"OnReadSegment SynFrameComplete 0b");
rv = TransmitFrame(nullptr, nullptr);
NS_ABORT_IF_FALSE(NS_FAILED(rv) || !mTxInlineFrameUsed,
"Transmit Frame should be all or nothing");
// normalize a blocked write into an ok one if we have consumed the data
// while parsing headers as some code will take WOULD_BLOCK to mean an
// error with nothing processed.
// (e.g. nsHttpTransaction::ReadRequestSegment())
if (rv == NS_BASE_STREAM_WOULD_BLOCK && *countRead)
rv = NS_OK;
// mTxInlineFrameUsed > 0 means the current frame is in progress
// of sending. mTxInlineFrameUsed is dropped to 0 after both the frame
// and its payload (if any) are completely sent out. Here during
// GENERATING_SYN_STREAM state we are sending just the http headers.
// Only when the frame is completely sent out do we proceed to
// GENERATING_REQUEST_BODY state.
if (mTxInlineFrameUsed)
ChangeState(SENDING_SYN_STREAM);
else
ChangeState(GENERATING_REQUEST_BODY);
break;
}
NS_ABORT_IF_FALSE(*countRead == count,
"Header parsing not complete but unused data");
break;
case GENERATING_REQUEST_BODY:
dataLength = NS_MIN(count, mChunkSize);
LOG3(("SpdyStream2 %p id %x request len remaining %d, "
"count avail %d, chunk used %d",
this, mStreamID, mRequestBodyLenRemaining, count, dataLength));
if (dataLength > mRequestBodyLenRemaining)
return NS_ERROR_UNEXPECTED;
mRequestBodyLenRemaining -= dataLength;
GenerateDataFrameHeader(dataLength, !mRequestBodyLenRemaining);
ChangeState(SENDING_REQUEST_BODY);
// NO BREAK
case SENDING_REQUEST_BODY:
NS_ABORT_IF_FALSE(mTxInlineFrameUsed, "OnReadSegment Send Data Header 0b");
rv = TransmitFrame(buf, countRead);
NS_ABORT_IF_FALSE(NS_FAILED(rv) || !mTxInlineFrameUsed,
"Transmit Frame should be all or nothing");
LOG3(("TransmitFrame() rv=%x returning %d data bytes. "
"Header is %d Body is %d.",
rv, *countRead, mTxInlineFrameUsed, mTxStreamFrameSize));
// normalize a partial write with a WOULD_BLOCK into just a partial write
// as some code will take WOULD_BLOCK to mean an error with nothing
// written (e.g. nsHttpTransaction::ReadRequestSegment()
if (rv == NS_BASE_STREAM_WOULD_BLOCK && *countRead)
rv = NS_OK;
// If that frame was all sent, look for another one
if (!mTxInlineFrameUsed)
ChangeState(GENERATING_REQUEST_BODY);
break;
case SENDING_SYN_STREAM:
rv = NS_BASE_STREAM_WOULD_BLOCK;
break;
case SENDING_FIN_STREAM:
NS_ABORT_IF_FALSE(false,
"resuming partial fin stream out of OnReadSegment");
break;
default:
NS_ABORT_IF_FALSE(false, "SpdyStream2::OnReadSegment non-write state");
break;
}
return rv;
}
//-----------------------------------------------------------------------------
// nsAHttpSegmentWriter
//-----------------------------------------------------------------------------
nsresult
SpdyStream2::OnWriteSegment(char *buf,
uint32_t count,
uint32_t *countWritten)
{
LOG3(("SpdyStream2::OnWriteSegment %p count=%d state=%x",
this, count, mUpstreamState));
NS_ABORT_IF_FALSE(PR_GetCurrentThread() == gSocketThread, "wrong thread");
NS_ABORT_IF_FALSE(mSegmentWriter, "OnWriteSegment with null mSegmentWriter");
return mSegmentWriter->OnWriteSegment(buf, count, countWritten);
}
} // namespace mozilla::net
} // namespace mozilla