gecko/security/nss/lib/freebl/ecl/ecp_jm.c

/* 
 * ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is the elliptic curve math library for prime field curves.
 *
 * The Initial Developer of the Original Code is
 * Sun Microsystems, Inc.
 * Portions created by the Initial Developer are Copyright (C) 2003
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *   Stephen Fung <fungstep@hotmail.com>, Sun Microsystems Laboratories
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

#include "ecp.h"
#include "ecl-priv.h"
#include "mplogic.h"
#include <stdlib.h>

#define MAX_SCRATCH 6

/* Computes R = 2P.  Elliptic curve points P and R can be identical.  Uses 
 * Modified Jacobian coordinates.
 *
 * Assumes input is already field-encoded using field_enc, and returns 
 * output that is still field-encoded.
 *
 */
mp_err
ec_GFp_pt_dbl_jm(const mp_int *px, const mp_int *py, const mp_int *pz,
				 const mp_int *paz4, mp_int *rx, mp_int *ry, mp_int *rz,
				 mp_int *raz4, mp_int scratch[], const ECGroup *group)
{
	mp_err res = MP_OKAY;
	mp_int *t0, *t1, *M, *S;

	t0 = &scratch[0];
	t1 = &scratch[1];
	M = &scratch[2];
	S = &scratch[3];

#if MAX_SCRATCH < 4
#error "Scratch array defined too small "
#endif

	/* Check for point at infinity */
	if (ec_GFp_pt_is_inf_jac(px, py, pz) == MP_YES) {
		/* Set r = pt at infinity by setting rz = 0 */

		MP_CHECKOK(ec_GFp_pt_set_inf_jac(rx, ry, rz));
		goto CLEANUP;
	}

	/* M = 3 (px^2) + a*(pz^4) */
	MP_CHECKOK(group->meth->field_sqr(px, t0, group->meth));
	MP_CHECKOK(group->meth->field_add(t0, t0, M, group->meth));
	MP_CHECKOK(group->meth->field_add(t0, M, t0, group->meth));
	MP_CHECKOK(group->meth->field_add(t0, paz4, M, group->meth));

	/* rz = 2 * py * pz */
	MP_CHECKOK(group->meth->field_mul(py, pz, S, group->meth));
	MP_CHECKOK(group->meth->field_add(S, S, rz, group->meth));

	/* t0 = 2y^2 , t1 = 8y^4 */
	MP_CHECKOK(group->meth->field_sqr(py, t0, group->meth));
	MP_CHECKOK(group->meth->field_add(t0, t0, t0, group->meth));
	MP_CHECKOK(group->meth->field_sqr(t0, t1, group->meth));
	MP_CHECKOK(group->meth->field_add(t1, t1, t1, group->meth));

	/* S = 4 * px * py^2 = 2 * px * t0 */
	MP_CHECKOK(group->meth->field_mul(px, t0, S, group->meth));
	MP_CHECKOK(group->meth->field_add(S, S, S, group->meth));


	/* rx = M^2 - 2S */
	MP_CHECKOK(group->meth->field_sqr(M, rx, group->meth));
	MP_CHECKOK(group->meth->field_sub(rx, S, rx, group->meth));
	MP_CHECKOK(group->meth->field_sub(rx, S, rx, group->meth));

	/* ry = M * (S - rx) - t1 */
	MP_CHECKOK(group->meth->field_sub(S, rx, S, group->meth));
	MP_CHECKOK(group->meth->field_mul(S, M, ry, group->meth));
	MP_CHECKOK(group->meth->field_sub(ry, t1, ry, group->meth));

	/* ra*z^4 = 2*t1*(apz4) */
	MP_CHECKOK(group->meth->field_mul(paz4, t1, raz4, group->meth));
	MP_CHECKOK(group->meth->field_add(raz4, raz4, raz4, group->meth));


  CLEANUP:
	return res;
}

/* Computes R = P + Q where R is (rx, ry, rz), P is (px, py, pz) and Q is
 * (qx, qy, 1).  Elliptic curve points P, Q, and R can all be identical.
 * Uses mixed Modified_Jacobian-affine coordinates. Assumes input is
 * already field-encoded using field_enc, and returns output that is still
 * field-encoded. */
mp_err
ec_GFp_pt_add_jm_aff(const mp_int *px, const mp_int *py, const mp_int *pz,
					 const mp_int *paz4, const mp_int *qx,
					 const mp_int *qy, mp_int *rx, mp_int *ry, mp_int *rz,
					 mp_int *raz4, mp_int scratch[], const ECGroup *group)
{
	mp_err res = MP_OKAY;
	mp_int *A, *B, *C, *D, *C2, *C3;

	A = &scratch[0];
	B = &scratch[1];
	C = &scratch[2];
	D = &scratch[3];
	C2 = &scratch[4];
	C3 = &scratch[5];

#if MAX_SCRATCH < 6
#error "Scratch array defined too small "
#endif

	/* If either P or Q is the point at infinity, then return the other
	 * point */
	if (ec_GFp_pt_is_inf_jac(px, py, pz) == MP_YES) {
		MP_CHECKOK(ec_GFp_pt_aff2jac(qx, qy, rx, ry, rz, group));
		MP_CHECKOK(group->meth->field_sqr(rz, raz4, group->meth));
		MP_CHECKOK(group->meth->field_sqr(raz4, raz4, group->meth));
		MP_CHECKOK(group->meth->
				   field_mul(raz4, &group->curvea, raz4, group->meth));
		goto CLEANUP;
	}
	if (ec_GFp_pt_is_inf_aff(qx, qy) == MP_YES) {
		MP_CHECKOK(mp_copy(px, rx));
		MP_CHECKOK(mp_copy(py, ry));
		MP_CHECKOK(mp_copy(pz, rz));
		MP_CHECKOK(mp_copy(paz4, raz4));
		goto CLEANUP;
	}

	/* A = qx * pz^2, B = qy * pz^3 */
	MP_CHECKOK(group->meth->field_sqr(pz, A, group->meth));
	MP_CHECKOK(group->meth->field_mul(A, pz, B, group->meth));
	MP_CHECKOK(group->meth->field_mul(A, qx, A, group->meth));
	MP_CHECKOK(group->meth->field_mul(B, qy, B, group->meth));

	/* C = A - px, D = B - py */
	MP_CHECKOK(group->meth->field_sub(A, px, C, group->meth));
	MP_CHECKOK(group->meth->field_sub(B, py, D, group->meth));

	/* C2 = C^2, C3 = C^3 */
	MP_CHECKOK(group->meth->field_sqr(C, C2, group->meth));
	MP_CHECKOK(group->meth->field_mul(C, C2, C3, group->meth));

	/* rz = pz * C */
	MP_CHECKOK(group->meth->field_mul(pz, C, rz, group->meth));

	/* C = px * C^2 */
	MP_CHECKOK(group->meth->field_mul(px, C2, C, group->meth));
	/* A = D^2 */
	MP_CHECKOK(group->meth->field_sqr(D, A, group->meth));

	/* rx = D^2 - (C^3 + 2 * (px * C^2)) */
	MP_CHECKOK(group->meth->field_add(C, C, rx, group->meth));
	MP_CHECKOK(group->meth->field_add(C3, rx, rx, group->meth));
	MP_CHECKOK(group->meth->field_sub(A, rx, rx, group->meth));

	/* C3 = py * C^3 */
	MP_CHECKOK(group->meth->field_mul(py, C3, C3, group->meth));

	/* ry = D * (px * C^2 - rx) - py * C^3 */
	MP_CHECKOK(group->meth->field_sub(C, rx, ry, group->meth));
	MP_CHECKOK(group->meth->field_mul(D, ry, ry, group->meth));
	MP_CHECKOK(group->meth->field_sub(ry, C3, ry, group->meth));

	/* raz4 = a * rz^4 */
	MP_CHECKOK(group->meth->field_sqr(rz, raz4, group->meth));
	MP_CHECKOK(group->meth->field_sqr(raz4, raz4, group->meth));
	MP_CHECKOK(group->meth->
			   field_mul(raz4, &group->curvea, raz4, group->meth));
CLEANUP:
	return res;
}

/* Computes R = nP where R is (rx, ry) and P is the base point. Elliptic
 * curve points P and R can be identical. Uses mixed Modified-Jacobian
 * co-ordinates for doubling and Chudnovsky Jacobian coordinates for
 * additions. Assumes input is already field-encoded using field_enc, and
 * returns output that is still field-encoded. Uses 5-bit window NAF
 * method (algorithm 11) for scalar-point multiplication from Brown,
 * Hankerson, Lopez, Menezes. Software Implementation of the NIST Elliptic 
 * Curves Over Prime Fields. */
mp_err
ec_GFp_pt_mul_jm_wNAF(const mp_int *n, const mp_int *px, const mp_int *py,
					  mp_int *rx, mp_int *ry, const ECGroup *group)
{
	mp_err res = MP_OKAY;
	mp_int precomp[16][2], rz, tpx, tpy;
	mp_int raz4;
	mp_int scratch[MAX_SCRATCH];
	signed char *naf = NULL;
	int i, orderBitSize;

	MP_DIGITS(&rz) = 0;
	MP_DIGITS(&raz4) = 0;
	MP_DIGITS(&tpx) = 0;
	MP_DIGITS(&tpy) = 0;
	for (i = 0; i < 16; i++) {
		MP_DIGITS(&precomp[i][0]) = 0;
		MP_DIGITS(&precomp[i][1]) = 0;
	}
	for (i = 0; i < MAX_SCRATCH; i++) {
		MP_DIGITS(&scratch[i]) = 0;
	}

	ARGCHK(group != NULL, MP_BADARG);
	ARGCHK((n != NULL) && (px != NULL) && (py != NULL), MP_BADARG);

	/* initialize precomputation table */
	MP_CHECKOK(mp_init(&tpx));
	MP_CHECKOK(mp_init(&tpy));;
	MP_CHECKOK(mp_init(&rz));
	MP_CHECKOK(mp_init(&raz4));

	for (i = 0; i < 16; i++) {
		MP_CHECKOK(mp_init(&precomp[i][0]));
		MP_CHECKOK(mp_init(&precomp[i][1]));
	}
	for (i = 0; i < MAX_SCRATCH; i++) {
		MP_CHECKOK(mp_init(&scratch[i]));
	}

	/* Set out[8] = P */
	MP_CHECKOK(mp_copy(px, &precomp[8][0]));
	MP_CHECKOK(mp_copy(py, &precomp[8][1]));

	/* Set (tpx, tpy) = 2P */
	MP_CHECKOK(group->
			   point_dbl(&precomp[8][0], &precomp[8][1], &tpx, &tpy,
						 group));

	/* Set 3P, 5P, ..., 15P */
	for (i = 8; i < 15; i++) {
		MP_CHECKOK(group->
				   point_add(&precomp[i][0], &precomp[i][1], &tpx, &tpy,
							 &precomp[i + 1][0], &precomp[i + 1][1],
							 group));
	}

	/* Set -15P, -13P, ..., -P */
	for (i = 0; i < 8; i++) {
		MP_CHECKOK(mp_copy(&precomp[15 - i][0], &precomp[i][0]));
		MP_CHECKOK(group->meth->
				   field_neg(&precomp[15 - i][1], &precomp[i][1],
							 group->meth));
	}

	/* R = inf */
	MP_CHECKOK(ec_GFp_pt_set_inf_jac(rx, ry, &rz));

	orderBitSize = mpl_significant_bits(&group->order);

	/* Allocate memory for NAF */
	naf = (signed char *) malloc(sizeof(signed char) * (orderBitSize + 1));
	if (naf == NULL) {
		res = MP_MEM;
		goto CLEANUP;
	}

	/* Compute 5NAF */
	ec_compute_wNAF(naf, orderBitSize, n, 5);

	/* wNAF method */
	for (i = orderBitSize; i >= 0; i--) {
		/* R = 2R */
		ec_GFp_pt_dbl_jm(rx, ry, &rz, &raz4, rx, ry, &rz, 
					     &raz4, scratch, group);
		if (naf[i] != 0) {
			ec_GFp_pt_add_jm_aff(rx, ry, &rz, &raz4,
								 &precomp[(naf[i] + 15) / 2][0],
								 &precomp[(naf[i] + 15) / 2][1], rx, ry,
								 &rz, &raz4, scratch, group);
		}
	}

	/* convert result S to affine coordinates */
	MP_CHECKOK(ec_GFp_pt_jac2aff(rx, ry, &rz, rx, ry, group));

  CLEANUP:
	for (i = 0; i < MAX_SCRATCH; i++) {
		mp_clear(&scratch[i]);
	}
	for (i = 0; i < 16; i++) {
		mp_clear(&precomp[i][0]);
		mp_clear(&precomp[i][1]);
	}
	mp_clear(&tpx);
	mp_clear(&tpy);
	mp_clear(&rz);
	mp_clear(&raz4);
	free(naf);
	return res;
}