gecko/content/smil/nsSMILTimedElement.h

611 lines
23 KiB
C++

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Mozilla SMIL module.
*
* The Initial Developer of the Original Code is Brian Birtles.
* Portions created by the Initial Developer are Copyright (C) 2005
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Brian Birtles <birtles@gmail.com>
*
* Alternatively, the contents of this file may be used under the terms of
* either of the GNU General Public License Version 2 or later (the "GPL"),
* or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#ifndef NS_SMILTIMEDELEMENT_H_
#define NS_SMILTIMEDELEMENT_H_
#include "nsSMILInterval.h"
#include "nsSMILInstanceTime.h"
#include "nsSMILMilestone.h"
#include "nsSMILTimeValueSpec.h"
#include "nsSMILRepeatCount.h"
#include "nsSMILTypes.h"
#include "nsTArray.h"
#include "nsTHashtable.h"
#include "nsHashKeys.h"
#include "nsAutoPtr.h"
#include "nsAttrValue.h"
class nsISMILAnimationElement;
class nsSMILAnimationFunction;
class nsSMILTimeContainer;
class nsSMILTimeValue;
class nsIAtom;
//----------------------------------------------------------------------
// nsSMILTimedElement
class nsSMILTimedElement
{
public:
nsSMILTimedElement();
~nsSMILTimedElement();
typedef mozilla::dom::Element Element;
/*
* Sets the owning animation element which this class uses to convert between
* container times and to register timebase elements.
*/
void SetAnimationElement(nsISMILAnimationElement* aElement);
/*
* Returns the time container with which this timed element is associated or
* nsnull if it is not associated with a time container.
*/
nsSMILTimeContainer* GetTimeContainer();
/*
* Returns the element targeted by the animation element. Needed for
* registering event listeners against the appropriate element.
*/
mozilla::dom::Element* GetTargetElement()
{
return mAnimationElement ?
mAnimationElement->GetTargetElementContent() :
nsnull;
}
/**
* Methods for supporting the nsIDOMElementTimeControl interface.
*/
/*
* Adds a new begin instance time at the current container time plus or minus
* the specified offset.
*
* @param aOffsetSeconds A real number specifying the number of seconds to add
* to the current container time.
* @return NS_OK if the operation succeeeded, or an error code otherwise.
*/
nsresult BeginElementAt(double aOffsetSeconds);
/*
* Adds a new end instance time at the current container time plus or minus
* the specified offset.
*
* @param aOffsetSeconds A real number specifying the number of seconds to add
* to the current container time.
* @return NS_OK if the operation succeeeded, or an error code otherwise.
*/
nsresult EndElementAt(double aOffsetSeconds);
/**
* Methods for supporting the nsSVGAnimationElement interface.
*/
/**
* According to SVG 1.1 SE this returns
*
* the begin time, in seconds, for this animation element's current
* interval, if it exists, regardless of whether the interval has begun yet.
*
* @return the start time as defined above in milliseconds or an unresolved
* time if there is no current interval.
*/
nsSMILTimeValue GetStartTime() const;
/**
* Returns the simple duration of this element.
*
* @return the simple duration in milliseconds or INDEFINITE.
*/
nsSMILTimeValue GetSimpleDuration() const
{
return mSimpleDur;
}
/**
* Internal SMIL methods
*/
/**
* Adds an instance time object this element's list of instance times.
* These instance times are used when creating intervals.
*
* This method is typically called by an nsSMILTimeValueSpec.
*
* @param aInstanceTime The time to add, expressed in container time.
* @param aIsBegin PR_TRUE if the time to be added represents a begin
* time or PR_FALSE if it represents an end time.
*/
void AddInstanceTime(nsSMILInstanceTime* aInstanceTime, PRBool aIsBegin);
/**
* Requests this element update the given instance time.
*
* This method is typically called by a child nsSMILTimeValueSpec.
*
* @param aInstanceTime The instance time to update.
* @param aUpdatedTime The time to update aInstanceTime with.
* @param aDependentTime The instance time upon which aInstanceTime should be
* based.
* @param aIsBegin PR_TRUE if the time to be updated represents a begin
* instance time or PR_FALSE if it represents an end
* instance time.
*/
void UpdateInstanceTime(nsSMILInstanceTime* aInstanceTime,
nsSMILTimeValue& aUpdatedTime,
PRBool aIsBegin);
/**
* Removes an instance time object from this element's list of instance times.
*
* This method is typically called by a child nsSMILTimeValueSpec.
*
* @param aInstanceTime The instance time to remove.
* @param aIsBegin PR_TRUE if the time to be removed represents a begin
* time or PR_FALSE if it represents an end time.
*/
void RemoveInstanceTime(nsSMILInstanceTime* aInstanceTime, PRBool aIsBegin);
/**
* Removes all the instance times associated with the given
* nsSMILTimeValueSpec object. Used when an ID assignment changes and hence
* all the previously associated instance times become invalid.
*
* @param aSpec The nsSMILTimeValueSpec object whose created
* nsSMILInstanceTime's should be removed.
* @param aIsBegin PR_TRUE if the times to be removed represent begin
* times or PR_FALSE if they are end times.
*/
void RemoveInstanceTimesForCreator(const nsSMILTimeValueSpec* aSpec,
PRBool aIsBegin);
/**
* Sets the object that will be called by this timed element each time it is
* sampled.
*
* In Schmitz's model it is possible to associate several time clients with
* a timed element but for now we only allow one.
*
* @param aClient The time client to associate. Any previous time client
* will be disassociated and no longer sampled. Setting this
* to nsnull will simply disassociate the previous client, if
* any.
*/
void SetTimeClient(nsSMILAnimationFunction* aClient);
/**
* Samples the object at the given container time. Timing intervals are
* updated and if this element is active at the given time the associated time
* client will be sampled with the appropriate simple time.
*
* @param aContainerTime The container time at which to sample.
*/
void SampleAt(nsSMILTime aContainerTime);
/**
* Performs a special sample for the end of an interval. Such a sample should
* only advance the timed element (and any dependent elements) to the waiting
* or postactive state. It should not cause a transition to the active state.
* Transition to the active state is only performed on a regular SampleAt.
*
* This allows all interval ends at a given time to be processed first and
* hence the new interval can be established based on full information of the
* available instance times.
*
* @param aContainerTime The container time at which to sample.
*/
void SampleEndAt(nsSMILTime aContainerTime);
/**
* Informs the timed element that its time container has changed time
* relative to document time. The timed element therefore needs to update its
* dependent elements (which may belong to a different time container) so they
* can re-resolve their times.
*/
void HandleContainerTimeChange();
/**
* Resets this timed element's accumulated times and intervals back to start
* up state.
*
* This is used for backwards seeking where rather than accumulating
* historical timing state and winding it back, we reset the element and seek
* forwards.
*/
void Rewind();
/**
* Attempts to set an attribute on this timed element.
*
* @param aAttribute The name of the attribute to set. The namespace of this
* attribute is not specified as it is checked by the host
* element. Only attributes in the namespace defined for
* SMIL attributes in the host language are passed to the
* timed element.
* @param aValue The attribute value.
* @param aResult The nsAttrValue object that may be used for storing the
* parsed result.
* @param aContextNode The element to use for context when resolving
* references to other elements.
* @param[out] aParseResult The result of parsing the attribute. Will be set
* to NS_OK if parsing is successful.
*
* @return PR_TRUE if the given attribute is a timing attribute, PR_FALSE
* otherwise.
*/
PRBool SetAttr(nsIAtom* aAttribute, const nsAString& aValue,
nsAttrValue& aResult, Element* aContextNode,
nsresult* aParseResult = nsnull);
/**
* Attempts to unset an attribute on this timed element.
*
* @param aAttribute The name of the attribute to set. As with SetAttr the
* namespace of the attribute is not specified (see
* SetAttr).
*
* @return PR_TRUE if the given attribute is a timing attribute, PR_FALSE
* otherwise.
*/
PRBool UnsetAttr(nsIAtom* aAttribute);
/**
* Adds a syncbase dependency to the list of dependents that will be notified
* when this timed element creates, deletes, or updates its current interval.
*
* @param aDependent The nsSMILTimeValueSpec object to notify. A raw pointer
* to this object will be stored. Therefore it is necessary
* for the object to be explicitly unregistered (with
* RemoveDependent) when it is destroyed.
*/
void AddDependent(nsSMILTimeValueSpec& aDependent);
/**
* Removes a syncbase dependency from the list of dependents that are notified
* when the current interval is modified.
*
* @param aDependent The nsSMILTimeValueSpec object to unregister.
*/
void RemoveDependent(nsSMILTimeValueSpec& aDependent);
/**
* Determines if this timed element is dependent on the given timed element's
* begin time for the interval currently in effect. Whilst the element is in
* the active state this is the current interval and in the postactive or
* waiting state this is the previous interval if one exists. In all other
* cases the element is not considered a time dependent of any other element.
*
* @param aOther The potential syncbase element.
* @return PR_TRUE if this timed element's begin time for the currently
* effective interval is directly or indirectly derived from aOther, PR_FALSE
* otherwise.
*/
PRBool IsTimeDependent(const nsSMILTimedElement& aOther) const;
/**
* Called when the timed element has been bound to the document so that
* references from this timed element to other elements can be resolved.
*
* @param aContextNode The node which provides the necessary context for
* resolving references. This is typically the element in
* the host language that owns this timed element. Should
* not be null.
*/
void BindToTree(nsIContent* aContextNode);
/**
* Called when the target of the animation has changed so that event
* registrations can be updated.
*/
void HandleTargetElementChange(mozilla::dom::Element* aNewTarget);
/**
* Called when the timed element has been removed from a document so that
* references to other elements can be broken.
*/
void DissolveReferences() { Unlink(); }
// Cycle collection
void Traverse(nsCycleCollectionTraversalCallback* aCallback);
void Unlink();
typedef PRBool (*RemovalTestFunction)(nsSMILInstanceTime* aInstance);
protected:
// Typedefs
typedef nsTArray<nsAutoPtr<nsSMILTimeValueSpec> > TimeValueSpecList;
typedef nsTArray<nsRefPtr<nsSMILInstanceTime> > InstanceTimeList;
typedef nsTArray<nsAutoPtr<nsSMILInterval> > IntervalList;
typedef nsPtrHashKey<nsSMILTimeValueSpec> TimeValueSpecPtrKey;
typedef nsTHashtable<TimeValueSpecPtrKey> TimeValueSpecHashSet;
// Helper classes
class InstanceTimeComparator {
public:
PRBool Equals(const nsSMILInstanceTime* aElem1,
const nsSMILInstanceTime* aElem2) const;
PRBool LessThan(const nsSMILInstanceTime* aElem1,
const nsSMILInstanceTime* aElem2) const;
};
struct NotifyTimeDependentsParams {
nsSMILInterval* mCurrentInterval;
nsSMILTimeContainer* mTimeContainer;
};
// Templated helper functions
template <class TestFunctor>
void RemoveInstanceTimes(InstanceTimeList& aArray, TestFunctor& aTest);
//
// Implementation helpers
//
nsresult SetBeginSpec(const nsAString& aBeginSpec,
Element* aContextNode,
RemovalTestFunction aRemove);
nsresult SetEndSpec(const nsAString& aEndSpec,
Element* aContextNode,
RemovalTestFunction aRemove);
nsresult SetSimpleDuration(const nsAString& aDurSpec);
nsresult SetMin(const nsAString& aMinSpec);
nsresult SetMax(const nsAString& aMaxSpec);
nsresult SetRestart(const nsAString& aRestartSpec);
nsresult SetRepeatCount(const nsAString& aRepeatCountSpec);
nsresult SetRepeatDur(const nsAString& aRepeatDurSpec);
nsresult SetFillMode(const nsAString& aFillModeSpec);
void UnsetBeginSpec(RemovalTestFunction aRemove);
void UnsetEndSpec(RemovalTestFunction aRemove);
void UnsetSimpleDuration();
void UnsetMin();
void UnsetMax();
void UnsetRestart();
void UnsetRepeatCount();
void UnsetRepeatDur();
void UnsetFillMode();
nsresult SetBeginOrEndSpec(const nsAString& aSpec,
Element* aContextNode,
PRBool aIsBegin,
RemovalTestFunction aRemove);
void ClearSpecs(TimeValueSpecList& aSpecs,
InstanceTimeList& aInstances,
RemovalTestFunction aRemove);
void ClearIntervalProgress();
void DoSampleAt(nsSMILTime aContainerTime, PRBool aEndOnly);
/**
* Helper function to check for an early end and, if necessary, update the
* current interval accordingly.
*
* See SMIL 3.0, section 5.4.5, Element life cycle, "Active Time - Playing an
* interval" for a description of ending early.
*
* @param aSampleTime The current sample time. Early ends should only be
* applied at the last possible moment (i.e. if they are at
* or before the current sample time) and only if the
* current interval is not already ending.
*/
void ApplyEarlyEnd(const nsSMILTimeValue& aSampleTime);
/**
* Clears certain state in response to the element restarting.
*
* This state is described in SMIL 3.0, section 5.4.3, Resetting element state
*/
void Reset();
/**
* Completes a seek operation by sending appropriate events and, in the case
* of a backwards seek, updating the state of timing information that was
* previously considered historical.
*/
void DoPostSeek();
/**
* Unmarks instance times that were previously preserved because they were
* considered important historical milestones but are no longer such because
* a backwards seek has been performed.
*/
void UnpreserveInstanceTimes(InstanceTimeList& aList);
/**
* Helper function to iterate through this element's accumulated timing
* information (specifically old nsSMILIntervals and nsSMILTimeInstanceTimes)
* and discard items that are no longer needed or exceed some threshold of
* accumulated state.
*/
void FilterHistory();
// Helper functions for FilterHistory to clear old nsSMILIntervals and
// nsSMILInstanceTimes respectively.
void FilterIntervals();
void FilterInstanceTimes(InstanceTimeList& aList);
/**
* Calculates the next acceptable interval for this element after the
* specified interval, or, if no previous interval is specified, it will be
* the first interval with an end time after t=0.
*
* @see SMILANIM 3.6.8
*
* @param aPrevInterval The previous interval used. If supplied, the first
* interval that begins after aPrevInterval will be
* returned. May be nsnull.
* @param aFixedBeginTime The time to use for the start of the interval. This
* is used when only the endpoint of the interval
* should be updated such as when the animation is in
* the ACTIVE state. May be nsnull.
* @param[out] aResult The next interval. Will be unchanged if no suitable
* interval was found (in which case NS_ERROR_FAILURE
* will be returned).
* @return NS_OK if a suitable interval was found, NS_ERROR_FAILURE
* otherwise.
*/
nsresult GetNextInterval(const nsSMILInterval* aPrevInterval,
const nsSMILInstanceTime* aFixedBeginTime,
nsSMILInterval& aResult) const;
nsSMILInstanceTime* GetNextGreater(const InstanceTimeList& aList,
const nsSMILTimeValue& aBase,
PRInt32& aPosition) const;
nsSMILInstanceTime* GetNextGreaterOrEqual(const InstanceTimeList& aList,
const nsSMILTimeValue& aBase,
PRInt32& aPosition) const;
nsSMILTimeValue CalcActiveEnd(const nsSMILTimeValue& aBegin,
const nsSMILTimeValue& aEnd) const;
nsSMILTimeValue GetRepeatDuration() const;
nsSMILTimeValue ApplyMinAndMax(const nsSMILTimeValue& aDuration) const;
nsSMILTime ActiveTimeToSimpleTime(nsSMILTime aActiveTime,
PRUint32& aRepeatIteration);
nsSMILInstanceTime* CheckForEarlyEnd(
const nsSMILTimeValue& aContainerTime) const;
void UpdateCurrentInterval(PRBool aForceChangeNotice = PR_FALSE);
void SampleSimpleTime(nsSMILTime aActiveTime);
void SampleFillValue();
void AddInstanceTimeFromCurrentTime(nsSMILTime aCurrentTime,
double aOffsetSeconds, PRBool aIsBegin);
void RegisterMilestone();
PRBool GetNextMilestone(nsSMILMilestone& aNextMilestone) const;
void NotifyNewInterval();
void NotifyChangedInterval();
void FireTimeEventAsync(PRUint32 aMsg, PRInt32 aDetail);
const nsSMILInstanceTime* GetEffectiveBeginInstance() const;
const nsSMILInterval* GetPreviousInterval() const;
PRBool HasPlayed() const { return !mOldIntervals.IsEmpty(); }
PRBool EndHasEventConditions() const;
// Reset the current interval by first passing ownership to a temporary
// variable so that if Unlink() results in us receiving a callback,
// mCurrentInterval will be nsnull and we will be in a consistent state.
void ResetCurrentInterval()
{
if (mCurrentInterval) {
// Transfer ownership to temp var. (This sets mCurrentInterval to null.)
nsAutoPtr<nsSMILInterval> interval(mCurrentInterval);
interval->Unlink();
}
}
// Hashtable callback methods
PR_STATIC_CALLBACK(PLDHashOperator) NotifyNewIntervalCallback(
TimeValueSpecPtrKey* aKey, void* aData);
//
// Members
//
nsISMILAnimationElement* mAnimationElement; // [weak] won't outlive
// owner
TimeValueSpecList mBeginSpecs; // [strong]
TimeValueSpecList mEndSpecs; // [strong]
nsSMILTimeValue mSimpleDur;
nsSMILRepeatCount mRepeatCount;
nsSMILTimeValue mRepeatDur;
nsSMILTimeValue mMin;
nsSMILTimeValue mMax;
enum nsSMILFillMode
{
FILL_REMOVE,
FILL_FREEZE
};
nsSMILFillMode mFillMode;
static nsAttrValue::EnumTable sFillModeTable[];
enum nsSMILRestartMode
{
RESTART_ALWAYS,
RESTART_WHENNOTACTIVE,
RESTART_NEVER
};
nsSMILRestartMode mRestartMode;
static nsAttrValue::EnumTable sRestartModeTable[];
InstanceTimeList mBeginInstances;
InstanceTimeList mEndInstances;
PRUint32 mInstanceSerialIndex;
nsSMILAnimationFunction* mClient;
nsAutoPtr<nsSMILInterval> mCurrentInterval;
IntervalList mOldIntervals;
PRUint32 mCurrentRepeatIteration;
nsSMILMilestone mPrevRegisteredMilestone;
static const nsSMILMilestone sMaxMilestone;
static const PRUint8 sMaxNumIntervals;
static const PRUint8 sMaxNumInstanceTimes;
// Set of dependent time value specs to be notified when establishing a new
// current interval. Change notifications and delete notifications are handled
// by the interval.
//
// [weak] The nsSMILTimeValueSpec objects register themselves and unregister
// on destruction. Likewise, we notify them when we are destroyed.
TimeValueSpecHashSet mTimeDependents;
/**
* The state of the element in its life-cycle. These states are based on the
* element life-cycle described in SMILANIM 3.6.8
*/
enum nsSMILElementState
{
STATE_STARTUP,
STATE_WAITING,
STATE_ACTIVE,
STATE_POSTACTIVE
};
nsSMILElementState mElementState;
enum nsSMILSeekState
{
SEEK_NOT_SEEKING,
SEEK_FORWARD_FROM_ACTIVE,
SEEK_FORWARD_FROM_INACTIVE,
SEEK_BACKWARD_FROM_ACTIVE,
SEEK_BACKWARD_FROM_INACTIVE
};
nsSMILSeekState mSeekState;
};
#endif // NS_SMILTIMEDELEMENT_H_