wine/gecko
0
0
Fork 0
mirror of https://gitlab.winehq.org/wine/wine-gecko.git synced 2024-09-13 09:24:08 -07:00
Code Issues Packages Projects Releases Wiki Activity
2bd6f43cdf
gecko/toolkit/components/maintenanceservice/workmonitor.cpp

402 lines
15 KiB
C++
Raw Blame History

/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is Maintenance service file system monitoring.
*
* The Initial Developer of the Original Code is
* Mozilla Foundation.
* Portions created by the Initial Developer are Copyright (C) 2011
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Brian R. Bondy <netzen@gmail.com>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include <shlobj.h>
#include <shlwapi.h>
#include <wtsapi32.h>
#include <userenv.h>
#include <shellapi.h>
#pragma comment(lib, "wtsapi32.lib")
#pragma comment(lib, "userenv.lib")
#pragma comment(lib, "shlwapi.lib")
#pragma comment(lib, "ole32.lib")
#pragma comment(lib, "rpcrt4.lib")
#include "nsWindowsHelpers.h"
#include "nsAutoPtr.h"
#include "workmonitor.h"
#include "serviceinstall.h"
#include "servicebase.h"
#include "registrycertificates.h"
#include "uachelper.h"
#include "updatehelper.h"
extern HANDLE ghSvcStopEvent;
// Wait 15 minutes for an update operation to run at most.
// Updates usually take less than a minute so this seems like a
// significantly large and safe amount of time to wait.
static const int TIME_TO_WAIT_ON_UPDATER = 15 * 60 * 1000;
PRUnichar* MakeCommandLine(int argc, PRUnichar **argv);
BOOL WriteStatusFailure(LPCWSTR updateDirPath, int errorCode);
BOOL PathGetSiblingFilePath(LPWSTR destinationBuffer, LPCWSTR siblingFilePath,
LPCWSTR newFileName);
// The error codes start from 16000 since Windows system error
// codes only go up to 15999
const int SERVICE_UPDATER_COULD_NOT_BE_STARTED = 16000;
const int SERVICE_NOT_ENOUGH_COMMAND_LINE_ARGS = 16001;
const int SERVICE_UPDATER_SIGN_ERROR = 16002;
const int SERVICE_UPDATER_COMPARE_ERROR = 16003;
const int SERVICE_UPDATER_IDENTITY_ERROR = 16004;
/**
* Runs an update process as the service using the SYSTEM account.
*
* @param argc The number of arguments in argv
* @param argv The arguments normally passed to updater.exe
* argv[0] must be the path to updater.exe
* @param processStarted Set to TRUE if the process was started.
* @return TRUE if the update process was run had a return code of 0.
*/
BOOL
StartUpdateProcess(int argc,
LPWSTR *argv,
BOOL &processStarted)
{
LOG(("Starting update process as the service in session 0.\n"));
STARTUPINFO si = {0};
si.cb = sizeof(STARTUPINFO);
si.lpDesktop = L"winsta0\\Default";
PROCESS_INFORMATION pi = {0};
// The updater command line is of the form:
// updater.exe update-dir apply [wait-pid [callback-dir callback-path args]]
LPWSTR cmdLine = MakeCommandLine(argc, argv);
// If we're about to start the update process from session 0,
// then we should not show a GUI. This only really needs to be done
// on Vista and higher, but it's better to keep everything consistent
// across all OS if it's of no harm.
if (argc >= 2 ) {
// Setting the desktop to blank will ensure no GUI is displayed
si.lpDesktop = L"";
si.dwFlags |= STARTF_USESHOWWINDOW;
si.wShowWindow = SW_HIDE;
}
// We move the updater.ini file out of the way because we will handle
// executing PostUpdate through the service. We handle PostUpdate from
// the service because there are some per user things that happen that
// can't run in session 0 which we run updater.exe in.
// Once we are done running updater.exe we rename updater.ini back so
// that if there were any errors the next updater.exe will run correctly.
WCHAR updaterINI[MAX_PATH + 1];
WCHAR updaterINITemp[MAX_PATH + 1];
BOOL selfHandlePostUpdate = FALSE;
// We use the updater.ini from the same directory as the updater.exe
// because of background updates.
if (PathGetSiblingFilePath(updaterINI, argv[0], L"updater.ini") &&
PathGetSiblingFilePath(updaterINITemp, argv[0], L"updater.tmp")) {
selfHandlePostUpdate = MoveFileEx(updaterINI, updaterINITemp,
MOVEFILE_REPLACE_EXISTING);
}
// Add an env var for MOZ_USING_SERVICE so the updater.exe can
// do anything special that it needs to do for service updates.
// Search in updater.cpp for more info on MOZ_USING_SERVICE
// for more info.
WCHAR envVarString[32];
wsprintf(envVarString, L"MOZ_USING_SERVICE=1");
_wputenv(envVarString);
// Empty value on _wputenv is how you remove an env variable in Windows
processStarted = CreateProcessW(argv[0], cmdLine,
NULL, NULL, FALSE,
CREATE_DEFAULT_ERROR_MODE,
NULL,
NULL, &si, &pi);
_wputenv(L"MOZ_USING_SERVICE=");
BOOL updateWasSuccessful = FALSE;
if (processStarted) {
// Wait for the updater process to finish
LOG(("Process was started... waiting on result.\n"));
DWORD waitRes = WaitForSingleObject(pi.hProcess, TIME_TO_WAIT_ON_UPDATER);
if (WAIT_TIMEOUT == waitRes) {
// We waited a long period of time for updater.exe and it never finished
// so kill it.
TerminateProcess(pi.hProcess, 1);
} else {
// Check the return code of updater.exe to make sure we get 0
DWORD returnCode;
if (GetExitCodeProcess(pi.hProcess, &returnCode)) {
LOG(("Process finished with return code %d.\n", returnCode));
// updater returns 0 if successful.
updateWasSuccessful = (returnCode == 0);
} else {
LOG(("Process finished but could not obtain return code.\n"));
}
}
CloseHandle(pi.hProcess);
CloseHandle(pi.hThread);
} else {
DWORD lastError = GetLastError();
LOG(("Could not create process as current user, "
"updaterPath: %ls; cmdLine: %l. (%d)\n",
argv[0], cmdLine, lastError));
}
// Now that we're done with the update, restore back the updater.ini file
// We use it ourselves, and also we want it back in case we had any type
// of error so that the normal update process can use it.
if (selfHandlePostUpdate) {
MoveFileEx(updaterINITemp, updaterINI, MOVEFILE_REPLACE_EXISTING);
// Only run the PostUpdate if the update was successful
if (updateWasSuccessful && argc > 2) {
LPCWSTR installationDir = argv[2];
LPCWSTR updateInfoDir = argv[1];
// Launch the PostProcess with admin access in session 0. This is
// actually launching the post update process but it takes in the
// callback app path to figure out where to apply to.
// The PostUpdate process with user only access will be done inside
// the unelevated updater.exe after the update process is complete
// from the service. We don't know here which session to start
// the user PostUpdate process from.
LOG(("Launching post update process as the service in session 0.\n"));
if (!LaunchWinPostProcess(installationDir, updateInfoDir, true, NULL)) {
LOG(("The post update process could not be launched.\n"));
}
}
}
free(cmdLine);
return updateWasSuccessful;
}
/**
* Processes a software update command
*
* @param argc The number of arguments in argv
* @param argv The arguments normally passed to updater.exe
* argv[0] must be the path to updater.exe
* @return TRUE if the update was successful.
*/
BOOL
ProessSoftwareUpdateCommand(DWORD argc, LPWSTR *argv)
{
BOOL result = TRUE;
if (argc < 3) {
LOG(("Not enough command line parameters specified. "
"Updating update.status.\n"));
// We can only update update.status if argv[1] exists. argv[1] is
// the directory where the update.status file exists.
if (argc > 1 ||
!WriteStatusFailure(argv[1],
SERVICE_NOT_ENOUGH_COMMAND_LINE_ARGS)) {
LOG(("Could not write update.status service update failure."
"Last error: %d\n", GetLastError()));
}
return FALSE;
}
// Verify that the updater.exe that we are executing is the same
// as the one in the installation directory which we are updating.
// The installation dir that we are installing to is argv[2].
WCHAR installDirUpdater[MAX_PATH + 1];
wcsncpy(installDirUpdater, argv[2], MAX_PATH);
if (!PathAppendSafe(installDirUpdater, L"updater.exe")) {
LOG(("Install directory updater could not be determined.\n"));
result = FALSE;
}
BOOL updaterIsCorrect;
if (result && !VerifySameFiles(argv[0], installDirUpdater,
updaterIsCorrect)) {
LOG(("Error checking if the updaters are the same.\n"
"Path 1: %ls\nPath 2: %ls\n", argv[0], installDirUpdater));
result = FALSE;
}
if (result && !updaterIsCorrect) {
LOG(("The updaters do not match, udpater will not run.\n"));
result = FALSE;
}
if (result) {
LOG(("updater.exe was compared successfully to the installation directory"
" updater.exe.\n"));
} else {
if (!WriteStatusFailure(argv[1],
SERVICE_UPDATER_COMPARE_ERROR)) {
LOG(("Could not write update.status updater compare failure.\n"));
}
return FALSE;
}
// Check to make sure the udpater.exe module has the unique updater identity.
// This is a security measure to make sure that the signed executable that
// we will run is actually an updater.
HMODULE updaterModule = LoadLibrary(argv[0]);
if (!updaterModule) {
LOG(("updater.exe module could not be loaded. (%d)\n", GetLastError()));
result = FALSE;
} else {
char updaterIdentity[64];
if (!LoadStringA(updaterModule, IDS_UPDATER_IDENTITY,
updaterIdentity, sizeof(updaterIdentity))) {
LOG(("The updater.exe application does not contain the Mozilla"
" updater identity.\n"));
result = FALSE;
}
if (strcmp(updaterIdentity, UPDATER_IDENTITY_STRING)) {
LOG(("The updater.exe identity string is not valid.\n"));
result = FALSE;
}
FreeLibrary(updaterModule);
}
if (result) {
LOG(("The updater.exe application contains the Mozilla"
" updater identity.\n"));
} else {
if (!WriteStatusFailure(argv[1],
SERVICE_UPDATER_IDENTITY_ERROR)) {
LOG(("Could not write update.status no updater identity.\n"));
}
return TRUE;
}
// Check for updater.exe sign problems
BOOL updaterSignProblem = FALSE;
#ifndef DISABLE_UPDATER_AUTHENTICODE_CHECK
updaterSignProblem = !DoesBinaryMatchAllowedCertificates(argv[2],
argv[0]);
#endif
// Only proceed with the update if we have no signing problems
if (!updaterSignProblem) {
BOOL updateProcessWasStarted = FALSE;
if (StartUpdateProcess(argc, argv,
updateProcessWasStarted)) {
LOG(("updater.exe was launched and run successfully!\n"));
LogFlush();
// We might not execute code after StartServiceUpdate because
// the service installer will stop the service if it is running.
StartServiceUpdate(argc, argv);
} else {
result = FALSE;
LOG(("Error running update process. Updating update.status"
" Last error: %d\n", GetLastError()));
LogFlush();
// If the update process was started, then updater.exe is responsible for
// setting the failure code. If it could not be started then we do the
// work. We set an error instead of directly setting status pending
// so that the app.update.service.errors pref can be updated when
// the callback app restarts.
if (!updateProcessWasStarted) {
if (!WriteStatusFailure(argv[1],
SERVICE_UPDATER_COULD_NOT_BE_STARTED)) {
LOG(("Could not write update.status service update failure."
"Last error: %d\n", GetLastError()));
}
}
}
} else {
result = FALSE;
LOG(("Could not start process due to certificate check error on "
"updater.exe. Updating update.status. Last error: %d\n", GetLastError()));
// When there is a certificate check error on the updater.exe application,
// we want to write out the error.
if (!WriteStatusFailure(argv[1],
SERVICE_UPDATER_SIGN_ERROR)) {
LOG(("Could not write pending state to update.status. (%d)\n",
GetLastError()));
}
}
LocalFree(argv);
return result;
}
/**
* Executes a service command.
*
* @param argc The number of arguments in argv
* @param argv The service command line arguments, argv[0] and argv[1]
* and automatically included by Windows. argv[2] is the
* service command.
*
* @return FALSE if there was an error executing the service command.
*/
BOOL
ExecuteServiceCommand(int argc, LPWSTR *argv)
{
if (argc < 3) {
LOG(("Not enough command line arguments to execute a service command\n"));
SetEvent(ghSvcStopEvent);
return FALSE;
}
// The tests work by making sure the log has changed, so we put a
// unique ID in the log.
RPC_WSTR guidString = RPC_WSTR(L"");
GUID guid;
HRESULT hr = CoCreateGuid(&guid);
if (SUCCEEDED(hr)) {
UuidToString(&guid, &guidString);
}
LOG(("Executing service command %ls, ID: %ls\n",
argv[2], reinterpret_cast<LPCWSTR>(guidString)));
RpcStringFree(&guidString);
BOOL result = FALSE;
if (!lstrcmpi(argv[2], L"software-update")) {
result = ProessSoftwareUpdateCommand(argc - 3, argv + 3);
// We might not reach here if the service install succeeded
// because the service self updates itself and the service
// installer will stop the service.
LOG(("Service command %ls complete.\n", argv[2]));
} else {
LOG(("Service command not recognized: %ls.\n", argv[2]));
// result is already set to FALSE
}
LOG(("service command %ls complete with result: %ls.\n",
argv[1], (result ? L"Success" : L"Failure")));
SetEvent(ghSvcStopEvent);
return TRUE;
}
Reference in New Issue View Git Blame Copy Permalink