gecko/toolkit/xre/nsCommandLineServiceMac.cpp

496 lines
16 KiB
C++

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is Mozilla Communicator client code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Simon Fraser <sfraser@netscape.com>
* Pierre Phaneuf <pp@ludusdesign.com>
* Mark Mentovai <mark@moxienet.com>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
// Special stuff for the Macintosh implementation of command-line service.
#include "nsCommandLineServiceMac.h"
// Mozilla
#include "nsDebug.h"
#include "nsILocalFileMac.h"
#include "nsDebug.h"
#include "nsNetUtil.h"
#include "nsIAppStartup.h"
#include "nsIServiceManager.h"
#include "nsIURL.h"
#include "nsIIOService.h"
#include "nsIURL.h"
#include "nsIServiceManager.h"
#include "nsNetCID.h"
#include "nsIDOMWindow.h"
#include "nsXPCOM.h"
#include "nsISupportsPrimitives.h"
#include "nsIWindowWatcher.h"
#include "jsapi.h"
#include "nsReadableUtils.h"
#include "nsIObserverService.h"
#include "nsIPrefService.h"
#include "nsAEEventHandling.h"
#include "nsXPFEComponentsCID.h"
// NSPR
#include "prmem.h"
#include "plstr.h"
#include "prenv.h"
// the static instance
nsMacCommandLine nsMacCommandLine::sMacCommandLine;
/*
* ReadLine --
*
* Read in a line of text, terminated by CR or LF, from inStream into buf.
* The terminating CR or LF is not included. The text in buf is terminated
* by a null byte.
* Returns the number of bytes in buf. If EOF and zero bytes were read, returns -1.
*/
static PRInt32 ReadLine(FILE* inStream, char* buf, PRInt32 bufSize)
{
PRInt32 charsRead = 0;
int c;
if (bufSize < 2)
return -1;
while (charsRead < (bufSize-1)) {
c = getc(inStream);
if (c == EOF || c == '\n' || c == '\r')
break;
buf[charsRead++] = c;
}
buf[charsRead] = '\0';
return (c == EOF && !charsRead) ? -1 : charsRead;
}
static PRUint32
ProcessAppleEvents()
{
// Dispatch all of the Apple Events waiting in the event queue.
PRUint32 processed = 0;
const EventTypeSpec kAppleEventList[] = {
{ kEventClassAppleEvent, kEventAppleEvent },
};
EventRef carbonEvent;
while (::ReceiveNextEvent(GetEventTypeCount(kAppleEventList),
kAppleEventList,
kEventDurationNoWait,
PR_TRUE,
&carbonEvent) == noErr) {
EventRecord eventRecord;
::ConvertEventRefToEventRecord(carbonEvent, &eventRecord);
::AEProcessAppleEvent(&eventRecord);
::ReleaseEvent(carbonEvent);
processed++;
}
return processed;
}
//----------------------------------------------------------------------------------------
nsMacCommandLine::nsMacCommandLine()
: mArgs(NULL)
, mArgsAllocated(0)
, mArgsUsed(0)
, mStartedUp(PR_FALSE)
//----------------------------------------------------------------------------------------
{
}
//----------------------------------------------------------------------------------------
nsMacCommandLine::~nsMacCommandLine()
//----------------------------------------------------------------------------------------
{
ShutdownAEHandlerClasses();
if (mArgs) {
for (PRUint32 i = 0; i < mArgsUsed; i++)
free(mArgs[i]);
free(mArgs);
}
}
//----------------------------------------------------------------------------------------
nsresult nsMacCommandLine::Initialize(int& argc, char**& argv)
//----------------------------------------------------------------------------------------
{
mArgs = static_cast<char **>(malloc(kArgsGrowSize * sizeof(char *)));
if (!mArgs)
return NS_ERROR_FAILURE;
mArgs[0] = nsnull;
mArgsAllocated = kArgsGrowSize;
mArgsUsed = 0;
// Here, we may actually get useful args.
// Copy them first to mArgv.
for (int arg = 0; arg < argc; arg++) {
char* flag = argv[arg];
// don't pass on the psn (Process Serial Number) flag from the OS
if (strncmp(flag, "-psn_", 5) != 0)
AddToCommandLine(flag);
}
// Set up AppleEvent handling.
OSErr err = CreateAEHandlerClasses(false);
if (err != noErr) return NS_ERROR_FAILURE;
// Snarf all the odoc and pdoc apple-events.
//
// 1. If they are odoc for 'CMDL' documents, read them into the buffer ready for
// parsing (concatenating multiple files).
//
// 2. If they are any other kind of document, convert them into -url command-line
// parameters or -print parameters, with file URLs.
// Spin a native event loop to allow AE handlers for waiting events to be
// called
ProcessAppleEvents();
// we've started up now
mStartedUp = PR_TRUE;
argc = mArgsUsed;
argv = mArgs;
return NS_OK;
}
//----------------------------------------------------------------------------------------
void nsMacCommandLine::SetupCommandLine(int& argc, char**& argv)
//----------------------------------------------------------------------------------------
{
// Initializes the command line from Apple Events and other sources,
// as appropriate for OS X.
//
// IMPORTANT: This must be done before XPCOM shutdown if the app is to
// relaunch (i.e. before the ScopedXPCOMStartup object goes out of scope).
// XPCOM shutdown can cause other things to process native events, and
// native event processing can cause the waiting Apple Events to be
// discarded.
// Process Apple Events and put them into the arguments.
Initialize(argc, argv);
Boolean isForeground = PR_FALSE;
ProcessSerialNumber psnSelf, psnFront;
// If the process will be relaunched, the child should be in the foreground
// if the parent is in the foreground. This will be communicated in a
// command-line argument to the child. Adding this argument is harmless
// if not relaunching.
if (::GetCurrentProcess(&psnSelf) == noErr &&
::GetFrontProcess(&psnFront) == noErr &&
::SameProcess(&psnSelf, &psnFront, &isForeground) == noErr &&
isForeground) {
// The process is currently in the foreground. The relaunched
// process should come to the front, too.
AddToCommandLine("-foreground");
}
argc = mArgsUsed;
argv = mArgs;
}
//----------------------------------------------------------------------------------------
nsresult nsMacCommandLine::AddToCommandLine(const char* inArgText)
//----------------------------------------------------------------------------------------
{
if (mArgsUsed >= mArgsAllocated - 1) {
// realloc does not free the given pointer if allocation fails.
char **temp = static_cast<char **>(realloc(mArgs, (mArgsAllocated + kArgsGrowSize) * sizeof(char *)));
if (!temp)
return NS_ERROR_OUT_OF_MEMORY;
mArgs = temp;
mArgsAllocated += kArgsGrowSize;
}
char *temp2 = strdup(inArgText);
if (!temp2)
return NS_ERROR_OUT_OF_MEMORY;
mArgs[mArgsUsed++] = temp2;
mArgs[mArgsUsed] = nsnull;
return NS_OK;
}
//----------------------------------------------------------------------------------------
nsresult nsMacCommandLine::AddToCommandLine(const char* inOptionString, const FSSpec& inFileSpec)
//----------------------------------------------------------------------------------------
{
// Convert the filespec to a URL. Avoid using xpcom because this may be
// called before xpcom startup.
FSRef fsRef;
if (::FSpMakeFSRef(&inFileSpec, &fsRef) != noErr)
return NS_ERROR_FAILURE;
CFURLRef url = ::CFURLCreateFromFSRef(nsnull, &fsRef);
if (!url)
return NS_ERROR_FAILURE;
CFStringRef string = ::CFURLGetString(url);
if (!string) {
::CFRelease(url);
return NS_ERROR_FAILURE;
}
CFIndex length = ::CFStringGetLength(string);
CFIndex bufLen = 0;
::CFStringGetBytes(string, CFRangeMake(0, length), kCFStringEncodingUTF8,
0, PR_FALSE, nsnull, 0, &bufLen);
UInt8 buffer[bufLen + 1];
if (!buffer) {
::CFRelease(url);
return NS_ERROR_FAILURE;
}
::CFStringGetBytes(string, CFRangeMake(0, length), kCFStringEncodingUTF8,
0, PR_FALSE, buffer, bufLen, nsnull);
buffer[bufLen] = 0;
::CFRelease(url);
AddToCommandLine(inOptionString);
AddToCommandLine((char*)buffer);
return NS_OK;
}
//----------------------------------------------------------------------------------------
nsresult nsMacCommandLine::AddToEnvironmentVars(const char* inArgText)
//----------------------------------------------------------------------------------------
{
(void)PR_SetEnv(inArgText);
return NS_OK;
}
//----------------------------------------------------------------------------------------
OSErr nsMacCommandLine::HandleOpenOneDoc(const FSSpec& inFileSpec, OSType inFileType)
//----------------------------------------------------------------------------------------
{
nsCOMPtr<nsILocalFileMac> inFile;
nsresult rv = NS_NewLocalFileWithFSSpec(&inFileSpec, PR_TRUE, getter_AddRefs(inFile));
if (NS_FAILED(rv))
return errAEEventNotHandled;
if (!mStartedUp)
{
// Is it the right type to be a command-line file?
if (inFileType == 'TEXT' || inFileType == 'CMDL')
{
// Can we open the file?
FILE *fp = 0;
rv = inFile->OpenANSIFileDesc("r", &fp);
if (NS_SUCCEEDED(rv))
{
Boolean foundArgs = false;
Boolean foundEnv = false;
char chars[1024];
static const char kCommandLinePrefix[] = "ARGS:";
static const char kEnvVarLinePrefix[] = "ENV:";
while (ReadLine(fp, chars, sizeof(chars)) != -1)
{ // See if there are any command line or environment var settings
if (PL_strstr(chars, kCommandLinePrefix) == chars)
{
(void)AddToCommandLine(chars + sizeof(kCommandLinePrefix) - 1);
foundArgs = true;
}
else if (PL_strstr(chars, kEnvVarLinePrefix) == chars)
{
(void)AddToEnvironmentVars(chars + sizeof(kEnvVarLinePrefix) - 1);
foundEnv = true;
}
}
fclose(fp);
// If we found a command line or environment vars we want to return now
// raather than trying to open the file as a URL
if (foundArgs || foundEnv)
return noErr;
}
}
// If it's not a command-line argument, and we are starting up the application,
// add a command-line "-url" argument to the global list. This means that if
// the app is opened with documents on the mac, they'll be handled the same
// way as if they had been typed on the command line in Unix or DOS.
return AddToCommandLine("-url", inFileSpec);
}
// Final case: we're not just starting up. How do we handle this?
nsCAutoString specBuf;
rv = NS_GetURLSpecFromFile(inFile, specBuf);
if (NS_FAILED(rv))
return errAEEventNotHandled;
return OpenURL(specBuf.get());
}
OSErr nsMacCommandLine::OpenURL(const char* aURL)
{
nsresult rv;
nsCOMPtr<nsIPrefBranch> prefBranch(do_GetService(NS_PREFSERVICE_CONTRACTID, &rv));
nsXPIDLCString browserURL;
if (NS_SUCCEEDED(rv))
rv = prefBranch->GetCharPref("browser.chromeURL", getter_Copies(browserURL));
if (NS_FAILED(rv)) {
NS_WARNING("browser.chromeURL not supplied! How is the app supposed to know what the main window is?");
browserURL.Assign("chrome://navigator/content/navigator.xul");
}
rv = OpenWindow(browserURL.get(), NS_ConvertASCIItoUTF16(aURL).get());
if (NS_FAILED(rv))
return errAEEventNotHandled;
return noErr;
}
//----------------------------------------------------------------------------------------
OSErr nsMacCommandLine::HandlePrintOneDoc(const FSSpec& inFileSpec, OSType fileType)
//----------------------------------------------------------------------------------------
{
// If we are starting up the application,
// add a command-line "-print" argument to the global list. This means that if
// the app is opened with documents on the mac, they'll be handled the same
// way as if they had been typed on the command line in Unix or DOS.
if (!mStartedUp)
return AddToCommandLine("-print", inFileSpec);
// Final case: we're not just starting up. How do we handle this?
NS_NOTYETIMPLEMENTED("Write Me");
return errAEEventNotHandled;
}
//----------------------------------------------------------------------------------------
nsresult nsMacCommandLine::OpenWindow(const char *chrome, const PRUnichar *url)
//----------------------------------------------------------------------------------------
{
nsCOMPtr<nsIWindowWatcher> wwatch(do_GetService(NS_WINDOWWATCHER_CONTRACTID));
nsCOMPtr<nsISupportsString> urlWrapper(do_CreateInstance(NS_SUPPORTS_STRING_CONTRACTID));
if (!wwatch || !urlWrapper)
return NS_ERROR_FAILURE;
urlWrapper->SetData(nsDependentString(url));
nsCOMPtr<nsIDOMWindow> newWindow;
nsresult rv;
rv = wwatch->OpenWindow(0, chrome, "_blank",
"chrome,dialog=no,all", urlWrapper,
getter_AddRefs(newWindow));
return rv;
}
//----------------------------------------------------------------------------------------
OSErr nsMacCommandLine::DispatchURLToNewBrowser(const char* url)
//----------------------------------------------------------------------------------------
{
OSErr err = errAEEventNotHandled;
if (mStartedUp)
return OpenURL(url);
else {
err = AddToCommandLine("-url");
if (err == noErr)
err = AddToCommandLine(url);
}
return err;
}
//----------------------------------------------------------------------------------------
OSErr nsMacCommandLine::Quit(TAskSave askSave)
//----------------------------------------------------------------------------------------
{
nsresult rv;
nsCOMPtr<nsIObserverService> obsServ =
do_GetService("@mozilla.org/observer-service;1", &rv);
if (NS_FAILED(rv))
return errAEEventNotHandled;
nsCOMPtr<nsISupportsPRBool> cancelQuit =
do_CreateInstance(NS_SUPPORTS_PRBOOL_CONTRACTID, &rv);
if (NS_FAILED(rv))
return errAEEventNotHandled;
cancelQuit->SetData(PR_FALSE);
if (askSave != eSaveNo) {
rv = obsServ->NotifyObservers(cancelQuit, "quit-application-requested", nsnull);
if (NS_FAILED(rv))
return errAEEventNotHandled;
}
PRBool abortQuit;
cancelQuit->GetData(&abortQuit);
if (abortQuit)
return userCanceledErr;
nsCOMPtr<nsIAppStartup> appStartup =
do_GetService(NS_APPSTARTUP_CONTRACTID, &rv);
if (NS_FAILED(rv))
return errAEEventNotHandled;
appStartup->Quit(nsIAppStartup::eAttemptQuit);
return noErr;
}
#pragma mark -
//----------------------------------------------------------------------------------------
void SetupMacCommandLine(int& argc, char**& argv)
//----------------------------------------------------------------------------------------
{
nsMacCommandLine& cmdLine = nsMacCommandLine::GetMacCommandLine();
return cmdLine.SetupCommandLine(argc, argv);
}