gecko/image/public/imgIRequest.idl
Justin Lebar d125c715f4 Bug 731419 - Part 1: Discard image data immediately on tab close, imagelib changes. r=joe
--HG--
extra : rebase_source : 5e08cc235f1a9cb7b63d83df13760f2f2a4de0a4
2012-03-10 01:29:28 -05:00

225 lines
7.4 KiB
Plaintext

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
*
* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 2001
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Stuart Parmenter <pavlov@netscape.com>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include "nsISupports.idl"
#include "nsIRequest.idl"
interface imgIContainer;
interface imgIDecoderObserver;
interface nsIURI;
interface nsIPrincipal;
/**
* imgIRequest interface
*
* @author Stuart Parmenter <stuart@mozilla.com>
* @version 0.1
* @see imagelib2
*/
[scriptable, uuid(d35a9adb-8328-4b64-b06f-72a165acd080)]
interface imgIRequest : nsIRequest
{
/**
* the image container...
* @return the image object associated with the request.
* @attention NEED DOCS
*/
readonly attribute imgIContainer image;
/**
* Bits set in the return value from imageStatus
* @name statusflags
*
* Meanings:
*
* STATUS_NONE: Nothing to report.
*
* STATUS_SIZE_AVAILABLE: We received enough image data
* from the network or filesystem that we know the width
* and height of the image, and have thus called SetSize()
* on the container.
*
* STATUS_LOAD_PARTIAL: Used internally by imgRequest to
* flag that a request is being cancelled as a result of
* a failure of a proxy holder and not an internal failure.
* At least I think that's what it does. Regardless, there's
* no reason for this flag to be public, and it should either
* go away or become a private state flag within imgRequest.
* Don't rely on it.
*
* STATUS_LOAD_COMPLETE: The data has been fully loaded
* to memory, but not necessarily fully decoded.
*
* STATUS_ERROR: An error occurred loading the image.
*
* STATUS_FRAME_COMPLETE: The first frame has been
* completely decoded.
*
* STATUS_DECODE_COMPLETE: The whole image has been decoded.
*/
//@{
const long STATUS_NONE = 0x0;
const long STATUS_SIZE_AVAILABLE = 0x1;
const long STATUS_LOAD_PARTIAL = 0x2;
const long STATUS_LOAD_COMPLETE = 0x4;
const long STATUS_ERROR = 0x8;
const long STATUS_FRAME_COMPLETE = 0x10;
const long STATUS_DECODE_COMPLETE = 0x20;
//@}
/**
* Status flags of the STATUS_* variety.
*/
readonly attribute unsigned long imageStatus;
/**
* The URI the image load was started with. Note that this might not be the
* actual URI for the image (e.g. if HTTP redirects happened during the
* load).
*/
readonly attribute nsIURI URI;
readonly attribute imgIDecoderObserver decoderObserver;
readonly attribute string mimeType;
/**
* Clone this request; the returned request will have aObserver as the
* observer. aObserver will be notified synchronously (before the clone()
* call returns) with all the notifications that have already been dispatched
* for this image load.
*/
imgIRequest clone(in imgIDecoderObserver aObserver);
/**
* The principal gotten from the channel the image was loaded from.
*/
readonly attribute nsIPrincipal imagePrincipal;
/**
* CORS modes images can be loaded with.
*
* By default, all images are loaded with CORS_NONE and cannot be used
* cross-origin in context like WebGL.
*
* If an HTML img element has the crossorigin attribute set, the imgIRequest
* will be validated for cross-origin usage with CORS, and, if successful,
* will have its CORS mode set to the relevant type.
*/
//@{
const long CORS_NONE = 1;
const long CORS_ANONYMOUS = 2;
const long CORS_USE_CREDENTIALS = 3;
//@}
/**
* The CORS mode that this image was loaded with.
*/
readonly attribute long CORSMode;
/**
* Cancels this request as in nsIRequest::Cancel(); further, also nulls out
* decoderObserver so it gets no further notifications from us.
*
* NOTE: You should not use this in any new code; instead, use cancel(). Note
* that cancel() is asynchronous, which means that some time after you call
* it, the listener/observer will get an OnStopRequest(). This means that, if
* you're the observer, you can't call cancel() from your destructor.
*/
void cancelAndForgetObserver(in nsresult aStatus);
/**
* Requests a decode for the image.
*
* imgIContainer has a requestDecode() method, but callers may want to request
* a decode before the container has necessarily been instantiated. Calling
* requestDecode() on the imgIRequest simply forwards along the request if the
* container already exists, or calls it once it gets OnStartContainer if the
* container does not yet exist.
*/
void requestDecode();
/**
* Locks an image. If the image does not exist yet, locks it once it becomes
* available. The lock persists for the lifetime of the imgIRequest (until
* unlockImage is called) even if the underlying image changes.
*
* If you don't call unlockImage() by the time this imgIRequest goes away, it
* will be called for you automatically.
*
* @see imgIContainer::lockImage for documentation of the underlying call.
*/
void lockImage();
/**
* Unlocks an image.
*
* @see imgIContainer::unlockImage for documentation of the underlying call.
*/
void unlockImage();
/**
* If this image is unlocked, discard the image's decoded data. If the image
* is locked or is already discarded, do nothing.
*/
void requestDiscard();
/**
* If this request is for an animated image, the method creates a new
* request which contains the current frame of the image.
* Otherwise returns the same request.
*/
imgIRequest getStaticRequest();
/**
* Requests that the image animate (if it has an animation).
*
* @see Image::IncrementAnimationConsumers for documentation of the underlying call.
*/
void incrementAnimationConsumers();
/**
* Tell the image it can forget about a request that the image animate.
*
* @see Image::DecrementAnimationConsumers for documentation of the underlying call.
*/
void decrementAnimationConsumers();
};