wine/gecko
0
0
Fork 0
mirror of https://gitlab.winehq.org/wine/wine-gecko.git synced 2024-09-13 09:24:08 -07:00
Code Issues Packages Projects Releases Wiki Activity
166d3ac09e
gecko/layout/mathml/updateOperatorDictionary.pl
Shawn Wilsher 06f60f7a34 Merge mozilla-central to Places
2010-11-10 09:38:08 -08:00

461 lines
15 KiB
Perl
Raw Blame History

#!/usr/bin/perl
# -*- Mode: Perl; tab-width: 2; indent-tabs-mode: nil; -*-
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is Mozilla MathML Project.
#
# The Initial Developer of the Original Code is
# Frederic Wang <fred.wang@free.fr>.
# Portions created by the Initial Developer are Copyright (C) 2010
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
use XML::XSLT;
use XML::DOM;
# output files
$FILE_DIFFERENCES = "differences.txt";
$FILE_NEW_DICTIONARY = "new_dictionary.txt";
$FILE_SYNTAX_ERRORS = "syntax_errors.txt";
# our dictionary (property file)
$MOZ_DICTIONARY = "mathfont.properties";
# dictionary provided in "XML Entity Definitions for Characters"
# The file unicode.xml is very large (> 5Mb), so it is expected that you
# provide instead the XML file transformed by operatorDictionary.xsl.
# > xsltproc -o dictionary.xml operatorDictionary.xsl unicode.xml
$WG_DICTIONARY = "dictionary.xml";
if (!($#ARGV >= 0 &&
((($ARGV[0] eq "compare") && $#ARGV <= 1) ||
(($ARGV[0] eq "check") && $#ARGV <= 0)))) {
&usage;
}
if ($ARGV[0] eq "compare" && $#ARGV == 1) {
$WG_DICTIONARY = $ARGV[1];
}
################################################################################
# structure of the dictionary used by this script:
# - key: same as in mathfont.properties
# - table:
# index | value
# 0 | description
# 1 | lspace
# 2 | rspace
# 3 | minsize
# 4 | largeop
# 5 | movablelimits
# 6 | stretchy
# 7 | separator
# 8 | accent
# 9 | fence
# 10 | symmetric
# 11 | priority
# 12 | linebreakstyle
# 13 | direction
# 14 | integral
# 1) build %moz_hash from $MOZ_DICTIONARY
print "loading $MOZ_DICTIONARY...\n";
open($file, $MOZ_DICTIONARY) || die ("Couldn't open $MOZ_DICTIONARY!");
print "building dictionary...\n";
while (<$file>) {
next unless (m/^operator\.(.*)$/);
(m/^([\w|\.|\\]*)\s=\s(.*)\s#\s(.*)$/);
# 1.1) build the key
$key = $1;
# 1.2) build the array
$_ = $2;
@value = ();
$value[0] = $3;
if (m/^(.*)lspace:(\d)(.*)$/) { $value[1] = $2; } else { $value[1] = "5"; }
if (m/^(.*)rspace:(\d)(.*)$/) { $value[2] = $2; } else { $value[2] = "5"; }
if (m/^(.*)minsize:(\d)(.*)$/) { $value[3] = $2; } else { $value[3] = "1"; }
$value[4] = (m/^(.*)largeop(.*)$/);
$value[5] = (m/^(.*)movablelimits(.*)$/);
$value[6] = (m/^(.*)stretchy(.*)$/);
$value[7] = (m/^(.*)separator(.*)$/);
$value[8] = (m/^(.*)accent(.*)$/);
$value[9] = (m/^(.*)fence(.*)$/);
$value[10] = (m/^(.*)symmetric(.*)$/);
$value[11] = ""; # we don't store "priority" in our dictionary
$value[12] = ""; # we don't store "linebreakstyle" in our dictionary
if (m/^(.*)direction:([a-z]*)(.*)$/) { $value[13] = $2; }
else { $value[13] = ""; }
$value[14] = (m/^(.*)integral(.*)$/);
# 1.3) save the key and value
$moz_hash{$key} = [ @value ];
}
close($file);
################################################################################
# 2) If mode "check", verify validity of our operator dictionary and quit.
# If mode "compare", go to step 3)
if ($ARGV[0] eq "check") {
print "checking operator dictionary...\n";
open($file_syntax_errors, ">$FILE_SYNTAX_ERRORS") ||
die ("Couldn't open $FILE_SYNTAX_ERRORS!");
$nb_errors = 0;
$nb_warnings = 0;
@moz_keys = (keys %moz_hash);
# check the validity of our private data
while ($key = pop(@moz_keys)) {
@moz = @{ $moz_hash{$key} };
$entry = &generateEntry($key, @moz);
$valid = 1;
if (!(@moz[13] eq "" ||
@moz[13] eq "horizontal" ||
@moz[13] eq "vertical")) {
$valid = 0;
$nb_errors++;
print $file_syntax_errors "error: invalid direction \"$moz[13]\"\n";
}
if (!@moz[4] && @moz[14]) {
$valid = 0;
$nb_warnings++;
print $file_syntax_errors "warning: operator is integral but not lareop\n";
}
$_ = @moz[0];
if ((m/^(.*)[iI]ntegral(.*)$/) && !@moz[14]) {
$valid = 0;
$nb_warnings++;
print $file_syntax_errors "warning: operator contains the term \"integral\" in its comment, but is not integral\n";
}
if (!$valid) {
print $file_syntax_errors $entry;
print $file_syntax_errors "\n";
}
}
# check that all forms have the same direction.
@moz_keys = (keys %moz_hash);
while ($key = pop(@moz_keys)) {
if (@{ $moz_hash{$key} }) {
# the operator has not been removed from the hash table yet.
$_ = $key;
(m/^([\w|\.|\\]*)\.(prefix|infix|postfix)$/);
$key_prefix = "$1.prefix";
$key_infix = "$1.infix";
$key_postfix = "$1.postfix";
@moz_prefix = @{ $moz_hash{$key_prefix} };
@moz_infix = @{ $moz_hash{$key_infix} };
@moz_postfix = @{ $moz_hash{$key_postfix} };
$same_direction = 1;
if (@moz_prefix) {
if (@moz_infix &&
!($moz_infix[13] eq $moz_prefix[13])) {
$same_direction = 0;
}
if (@moz_postfix &&
!($moz_postfix[13] eq $moz_prefix[13])) {
$same_direction = 0;
}
}
if (@moz_infix) {
if (@moz_postfix &&
!($moz_postfix[13] eq $moz_infix[13])) {
$same_direction = 0;
}
}
if (!$same_direction) {
$nb_errors++;
print $file_syntax_errors
"error: operator has a stretchy form, but all forms";
print $file_syntax_errors
" have not the same direction\n";
if (@moz_prefix) {
$_ = &generateEntry($key_prefix, @moz_prefix);
print $file_syntax_errors $_;
}
if (@moz_infix) {
$_ = &generateEntry($key_infix, @moz_infix);
print $file_syntax_errors $_;
}
if (@moz_postfix) {
$_ = &generateEntry($key_postfix, @moz_postfix);
print $file_syntax_errors $_;
}
print $file_syntax_errors "\n";
}
if (@moz_prefix) {
delete $moz_hash{$key.prefix};
}
if (@moz_infix) {
delete $moz_hash{$key_infix};
}
if (@moz_postfix) {
delete $moz_hash{$key_postfix};
}
}
}
close($file_syntax_errors);
print "\n";
if ($nb_errors > 0 || $nb_warnings > 0) {
print "$nb_errors error(s) found\n";
print "$nb_warnings warning(s) found\n";
print "See output file $FILE_SYNTAX_ERRORS.\n\n";
} else {
print "No error found.\n\n";
}
exit 0;
}
################################################################################
# 3) build %wg_hash and @wg_keys from the page $WG_DICTIONARY
print "loading $WG_DICTIONARY...\n";
$parser = new XML::DOM::Parser;
$doc = $parser->parsefile($WG_DICTIONARY)->getDocumentElement;
print "building dictionary...\n";
@wg_keys = ();
$entries = $doc->getElementsByTagName("entry");
$n = $entries->getLength;
for ($i = 0; $i < $n; $i++) {
$entry = $entries->item($i);
# 3.1) build the key
$key = "operator.";
$_ = $entry->getAttribute("unicode");
$_ = "$_-";
while (m/^U?0(\w*)-(.*)$/) {
# Concatenate .\uNNNN
$key = "$key\\u$1";
$_ = $2;
}
$_ = $entry->getAttribute("form"); # "Form"
$key = "$key.$_";
# 3.2) build the array
@value = ();
$value[0] = lc($entry->getAttribute("description"));
$value[1] = $entry->getAttribute("lspace");
if ($value[1] eq "") { $value[1] = "5"; }
$value[2] = $entry->getAttribute("rspace");
if ($value[2] eq "") { $value[2] = "5"; }
$value[3] = $entry->getAttribute("minsize");
if ($value[3] eq "") { $value[3] = "1"; }
$_ = $entry->getAttribute("properties");
$value[4] = (m/^(.*)largeop(.*)$/);
$value[5] = (m/^(.*)movablelimits(.*)$/);
$value[6] = (m/^(.*)stretchy(.*)$/);
$value[7] = (m/^(.*)separator(.*)$/);
$value[8] = (m/^(.*)accent(.*)$/);
$value[9] = (m/^(.*)fence(.*)$/);
$value[10] = (m/^(.*)symmetric(.*)$/);
$value[11] = $entry->getAttribute("priority");
$value[12] = $entry->getAttribute("linebreakstyle");
# not stored in the WG dictionary
$value[13] = ""; # direction
$value[14] = ""; # integral
# 3.3) save the key and value
push(@wg_keys, $key);
$wg_hash{$key} = [ @value ];
}
$doc->dispose;
@wg_keys = reverse(@wg_keys);
################################################################################
# 4) Compare the two dictionaries and output the result
print "comparing dictionaries...\n";
open($file_differences, ">$FILE_DIFFERENCES") ||
die ("Couldn't open $FILE_DIFFERENCES!");
open($file_new_dictionary, ">$FILE_NEW_DICTIONARY") ||
die ("Couldn't open $FILE_NEW_DICTIONARY!");
$conflicting = 0; $conflicting_stretching = 0;
$new = 0; $new_stretching = 0;
$obsolete = 0; $obsolete_stretching = 0;
$unchanged = 0;
# 4.1) look to the entries of the WG dictionary
while ($key = pop(@wg_keys)) {
@wg = @{ $wg_hash{$key} };
delete $wg_hash{$key};
$wg_value = &generateCommon(@wg);
if (exists($moz_hash{$key})) {
# entry is in both dictionary
@moz = @{ $moz_hash{$key} };
delete $moz_hash{$key};
$moz_value = &generateCommon(@moz);
if ($moz_value ne $wg_value) {
# conflicting entry
print $file_differences "[conflict]";
$conflicting++;
if ($moz[6] != $wg[6]) {
print $file_differences "[stretching]";
$conflicting_stretching++;
}
print $file_differences " - $key ($wg[0])\n";
print $file_differences "-$moz_value\n+$wg_value\n\n";
$_ = &completeCommon($wg_value, $key, @moz, @wg);
print $file_new_dictionary $_;
} else {
# unchanged entry
$unchanged++;
$_ = &completeCommon($wg_value, $key, @moz, @wg);
print $file_new_dictionary $_;
}
} else {
# we don't have this entry in our dictionary yet
print $file_differences "[new entry]";
$new++;
if ($wg[6]) {
print $file_differences "[stretching]";
$new_stretching++;
}
print $file_differences " - $key ($wg[0])\n";
print $file_differences "-\n+$wg_value\n\n";
$_ = &completeCommon($wg_value, $key, (), @wg);
print $file_new_dictionary $_;
}
}
print $file_new_dictionary
"\n# Entries below are not part of the official MathML dictionary\n\n";
# 4.2) look in our dictionary the remaining entries
@moz_keys = (keys %moz_hash);
@moz_keys = reverse(sort(@moz_keys));
while ($key = pop(@moz_keys)) {
@moz = @{ $moz_hash{$key} };
$moz_value = &generateCommon(@moz);
print $file_differences "[obsolete entry]";
$obsolete++;
if ($moz[6]) {
print $file_differences "[stretching]";
$obsolete_stretching++;
}
print $file_differences " - $key ($moz[0])\n";
print $file_differences "-$moz_value\n+\n\n";
$_ = &completeCommon($moz_value, $key, (), @moz);
print $file_new_dictionary $_;
}
close($file_differences);
close($file_new_dictionary);
print "\n";
print "- $obsolete obsolete entries ";
print "($obsolete_stretching of them are related to stretching)\n";
print "- $unchanged unchanged entries\n";
print "- $conflicting conflicting entries ";
print "($conflicting_stretching of them are related to stretching)\n";
print "- $new new entries ";
print "($new_stretching of them are related to stretching)\n";
print "\nSee output files $FILE_DIFFERENCES and $FILE_NEW_DICTIONARY.\n\n";
print "After having modified the dictionary, please run";
print "./updateOperatorDictionary check\n\n";
exit 0;
################################################################################
sub usage {
# display the accepted command syntax and quit
print "usage:\n";
print " ./updateOperatorDictionary.pl compare [dictionary]\n";
print " ./updateOperatorDictionary.pl check\n";
exit 0;
}
sub generateCommon {
# helper function to generate the string of data shared by both dictionaries
my(@v) = @_;
$entry = "lspace:$v[1] rspace:$v[2]";
if ($v[3] ne "1") { $entry = "$entry minsize:$v[3]"; }
if ($v[4]) { $entry = "$entry largeop"; }
if ($v[5]) { $entry = "$entry movablelimits"; }
if ($v[6]) { $entry = "$entry stretchy"; }
if ($v[7]) { $entry = "$entry separator"; }
if ($v[8]) { $entry = "$entry accent"; }
if ($v[9]) { $entry = "$entry fence"; }
if ($v[10]) { $entry = "$entry symmetric"; }
return $entry;
}
sub completeCommon {
# helper to add key and private data to generateCommon
my($entry, $key, @v_moz, @v_wg) = @_;
$entry = "$key = $entry";
if ($v_moz[13]) { $entry = "$entry direction:$v_moz[13]"; }
if ($v_moz[14]) { $entry = "$entry integral"; }
if ($v_moz[0]) {
# keep our previous comment
$entry = "$entry # $v_moz[0]";
} else {
# otherwise use the description given by the WG
$entry = "$entry # $v_wg[0]";
}
$entry = "$entry\n";
return $entry;
}
sub generateEntry {
# helper function to generate an entry of our operator dictionary
my($key, @moz) = @_;
$entry = &generateCommon(@moz);
$entry = &completeCommon($entry, $key, @moz, @moz);
return $entry;
}
Reference in New Issue View Git Blame Copy Permalink