gecko/netwerk/protocol/ftp/nsFtpConnectionThread.h

302 lines
11 KiB
C++

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Bradley Baetz <bbaetz@student.usyd.edu.au>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#ifndef __nsFtpState__h_
#define __nsFtpState__h_
#include "ftpCore.h"
#include "nsFTPChannel.h"
#include "nsBaseContentStream.h"
#include "nsIThread.h"
#include "nsIRunnable.h"
#include "nsISocketTransportService.h"
#include "nsISocketTransport.h"
#include "nsIServiceManager.h"
#include "nsIStreamListener.h"
#include "nsICacheListener.h"
#include "nsIURI.h"
#include "prnetdb.h"
#include "prtime.h"
#include "nsString.h"
#include "nsIFTPChannel.h"
#include "nsIProtocolHandler.h"
#include "nsCOMPtr.h"
#include "nsIAsyncInputStream.h"
#include "nsIOutputStream.h"
#include "nsAutoPtr.h"
#include "nsIPrompt.h"
#include "nsITransport.h"
#include "nsIProxyInfo.h"
#include "nsFtpControlConnection.h"
#include "nsICacheEntryDescriptor.h"
#include "nsICacheListener.h"
// ftp server types
#define FTP_GENERIC_TYPE 0
#define FTP_UNIX_TYPE 1
#define FTP_VMS_TYPE 8
#define FTP_NT_TYPE 9
#define FTP_OS2_TYPE 11
// ftp states
typedef enum _FTP_STATE {
///////////////////////
//// Internal states
FTP_INIT,
FTP_WAIT_CACHE,
FTP_READ_CACHE,
FTP_COMMAND_CONNECT,
FTP_READ_BUF,
FTP_ERROR,
FTP_COMPLETE,
///////////////////////
//// Command channel connection setup states
FTP_S_USER, FTP_R_USER,
FTP_S_PASS, FTP_R_PASS,
FTP_S_SYST, FTP_R_SYST,
FTP_S_ACCT, FTP_R_ACCT,
FTP_S_TYPE, FTP_R_TYPE,
FTP_S_CWD, FTP_R_CWD,
FTP_S_SIZE, FTP_R_SIZE,
FTP_S_MDTM, FTP_R_MDTM,
FTP_S_REST, FTP_R_REST,
FTP_S_RETR, FTP_R_RETR,
FTP_S_STOR, FTP_R_STOR,
FTP_S_LIST, FTP_R_LIST,
FTP_S_PASV, FTP_R_PASV,
FTP_S_PWD, FTP_R_PWD
} FTP_STATE;
// higher level ftp actions
typedef enum _FTP_ACTION {GET, PUT} FTP_ACTION;
class nsFtpChannel;
// The nsFtpState object is the content stream for the channel. It implements
// nsIInputStreamCallback, so it can read data from the control connection. It
// implements nsITransportEventSink so it can mix status events from both the
// control connection and the data connection.
class nsFtpState : public nsBaseContentStream,
public nsIInputStreamCallback,
public nsITransportEventSink,
public nsICacheListener,
public nsIRequestObserver,
public nsFtpControlConnectionListener {
public:
NS_DECL_ISUPPORTS_INHERITED
NS_DECL_NSIINPUTSTREAMCALLBACK
NS_DECL_NSITRANSPORTEVENTSINK
NS_DECL_NSICACHELISTENER
NS_DECL_NSIREQUESTOBSERVER
// Override input stream methods:
NS_IMETHOD CloseWithStatus(nsresult status);
NS_IMETHOD Available(PRUint32 *result);
NS_IMETHOD ReadSegments(nsWriteSegmentFun fun, void *closure,
PRUint32 count, PRUint32 *result);
// nsFtpControlConnectionListener methods:
virtual void OnControlDataAvailable(const char *data, PRUint32 dataLen);
virtual void OnControlError(nsresult status);
nsFtpState();
nsresult Init(nsFtpChannel *channel);
protected:
// Notification from nsBaseContentStream::AsyncWait
virtual void OnCallbackPending();
private:
virtual ~nsFtpState();
///////////////////////////////////
// BEGIN: STATE METHODS
nsresult S_user(); FTP_STATE R_user();
nsresult S_pass(); FTP_STATE R_pass();
nsresult S_syst(); FTP_STATE R_syst();
nsresult S_acct(); FTP_STATE R_acct();
nsresult S_type(); FTP_STATE R_type();
nsresult S_cwd(); FTP_STATE R_cwd();
nsresult S_size(); FTP_STATE R_size();
nsresult S_mdtm(); FTP_STATE R_mdtm();
nsresult S_list(); FTP_STATE R_list();
nsresult S_rest(); FTP_STATE R_rest();
nsresult S_retr(); FTP_STATE R_retr();
nsresult S_stor(); FTP_STATE R_stor();
nsresult S_pasv(); FTP_STATE R_pasv();
nsresult S_pwd(); FTP_STATE R_pwd();
// END: STATE METHODS
///////////////////////////////////
// internal methods
void MoveToNextState(FTP_STATE nextState);
nsresult Process();
void KillControlConnection();
nsresult StopProcessing();
nsresult EstablishControlConnection();
nsresult SendFTPCommand(const nsCSubstring& command);
void ConvertFilespecToVMS(nsCString& fileSpec);
void ConvertDirspecToVMS(nsCString& fileSpec);
void ConvertDirspecFromVMS(nsCString& fileSpec);
nsresult BuildStreamConverter(nsIStreamListener** convertStreamListener);
nsresult SetContentType();
nsresult ConvertUTF8PathToCharset(const nsACString &aCharset);
/**
* This method is called to kick-off the FTP state machine. mState is
* reset to FTP_COMMAND_CONNECT, and the FTP state machine progresses from
* there. This method is initially called (indirectly) from the channel's
* AsyncOpen implementation.
*/
void Connect();
/**
* This method opens a cache entry for reading or writing depending on the
* state of the channel and of the system (e.g., opened for reading if we
* are offline). This method is responsible for setting mCacheEntry if
* there is a cache entry that can be used. It returns true if it ends up
* waiting (asynchronously) for access to the cache entry. In that case,
* the nsFtpState's OnCacheEntryAvailable method will be called once the
* cache entry is available or if an error occurs.
*/
bool CheckCache();
/**
* This method returns true if the data for this URL can be read from the
* cache. This method assumes that mCacheEntry is non-null.
*/
bool CanReadCacheEntry();
/**
* This method causes the cache entry to be read. Data from the cache
* entry will be fed to the channel's listener. This method returns true
* if successfully reading from the cache. This method assumes that
* mCacheEntry is non-null and opened with read access.
*/
bool ReadCacheEntry();
/**
* This method configures mDataStream with an asynchronous input stream to
* the cache entry. The cache entry is read on a background thread. This
* method assumes that mCacheEntry is non-null and opened with read access.
*/
nsresult OpenCacheDataStream();
/**
* This method inserts the cache entry's output stream into the stream
* listener chain for the FTP channel. As a result, the cache entry
* receives data as data is pushed to the channel's listener. This method
* assumes that mCacheEntry is non-null and opened with write access.
*/
nsresult InstallCacheListener();
///////////////////////////////////
// Private members
// ****** state machine vars
FTP_STATE mState; // the current state
FTP_STATE mNextState; // the next state
bool mKeepRunning; // thread event loop boolean
PRInt32 mResponseCode; // the last command response code
nsCString mResponseMsg; // the last command response text
// ****** channel/transport/stream vars
nsRefPtr<nsFtpControlConnection> mControlConnection; // cacheable control connection (owns mCPipe)
bool mReceivedControlData;
bool mTryingCachedControl; // retrying the password
bool mRETRFailed; // Did we already try a RETR and it failed?
PRUint64 mFileSize;
nsCString mModTime;
// ****** consumer vars
nsRefPtr<nsFtpChannel> mChannel; // our owning FTP channel we pass through our events
nsCOMPtr<nsIProxyInfo> mProxyInfo;
// ****** connection cache vars
PRInt32 mServerType; // What kind of server are we talking to
// ****** protocol interpretation related state vars
nsString mUsername; // username
nsString mPassword; // password
FTP_ACTION mAction; // the higher level action (GET/PUT)
bool mAnonymous; // try connecting anonymous (default)
bool mRetryPass; // retrying the password
bool mStorReplyReceived; // FALSE if waiting for STOR
// completion status from server
nsresult mInternalError; // represents internal state errors
bool mReconnectAndLoginAgain;
bool mCacheConnection;
// ****** URI vars
PRInt32 mPort; // the port to connect to
nsString mFilename; // url filename (if any)
nsCString mPath; // the url's path
nsCString mPwd; // login Path
// ****** other vars
nsCOMPtr<nsITransport> mDataTransport;
nsCOMPtr<nsIAsyncInputStream> mDataStream;
nsCOMPtr<nsIRequest> mUploadRequest;
bool mAddressChecked;
bool mServerIsIPv6;
static PRUint32 mSessionStartTime;
PRNetAddr mServerAddress;
// ***** control read gvars
nsresult mControlStatus;
nsCString mControlReadCarryOverBuf;
nsCOMPtr<nsICacheEntryDescriptor> mCacheEntry;
bool mDoomCache;
nsCString mSuppliedEntityID;
};
#endif //__nsFtpState__h_