wine/gecko
0
0
Fork 0
mirror of https://gitlab.winehq.org/wine/wine-gecko.git synced 2024-09-13 09:24:08 -07:00
Code Issues Packages Projects Releases Wiki Activity
0f27963db7
gecko/security/nss/tests/ssl/ssl.sh
Kai Engert 2b43284096 Bug 486182, Land NSS 3.12.3 final in mozilla-central 
r=nelson
2009-04-07 03:36:45 +02:00

981 lines
32 KiB
Bash
Executable File
Raw Blame History

#! /bin/bash
#
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is the Netscape security libraries.
#
# The Initial Developer of the Original Code is
# Netscape Communications Corporation.
# Portions created by the Initial Developer are Copyright (C) 1994-2000
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
# Dr Vipul Gupta <vipul.gupta@sun.com>, Sun Microsystems Laboratories
# Slavomir Katuscak <slavomir.katuscak@sun.com>, Sun Microsystems
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
########################################################################
#
# mozilla/security/nss/tests/ssl/ssl.sh
#
# Script to test NSS SSL
#
# needs to work on all Unix and Windows platforms
#
# special strings
# ---------------
# FIXME ... known problems, search for this string
# NOTE .... unexpected behavior
#
########################################################################
############################## ssl_init ################################
# local shell function to initialize this script
########################################################################
ssl_init()
{
SCRIPTNAME=ssl.sh # sourced - $0 would point to all.sh
if [ -z "${CLEANUP}" ] ; then # if nobody else is responsible for
CLEANUP="${SCRIPTNAME}" # cleaning this script will do it
fi
if [ -z "${INIT_SOURCED}" -o "${INIT_SOURCED}" != "TRUE" ]; then
cd ../common
. ./init.sh
fi
if [ -z "${IOPR_SSL_SOURCED}" ]; then
. ../iopr/ssl_iopr.sh
fi
if [ ! -r $CERT_LOG_FILE ]; then # we need certificates here
cd ../cert
. ./cert.sh
fi
SCRIPTNAME=ssl.sh
echo "$SCRIPTNAME: SSL tests ==============================="
grep "SUCCESS: SSL passed" $CERT_LOG_FILE >/dev/null || {
html_head "SSL Test failure"
Exit 8 "Fatal - cert.sh needs to pass first"
}
if [ -z "$NSS_TEST_DISABLE_CRL" ] ; then
grep "SUCCESS: SSL CRL prep passed" $CERT_LOG_FILE >/dev/null || {
html_head "SSL Test failure"
Exit 8 "Fatal - SSL of cert.sh needs to pass first"
}
fi
PORT=${PORT-8443}
NSS_SSL_TESTS=${NSS_SSL_TESTS:-normal_normal}
nss_ssl_run="cov auth stress"
NSS_SSL_RUN=${NSS_SSL_RUN:-$nss_ssl_run}
# Test case files
SSLCOV=${QADIR}/ssl/sslcov.txt
SSLAUTH=${QADIR}/ssl/sslauth.txt
SSLSTRESS=${QADIR}/ssl/sslstress.txt
REQUEST_FILE=${QADIR}/ssl/sslreq.dat
#temparary files
SERVEROUTFILE=${TMP}/tests_server.$$
SERVERPID=${TMP}/tests_pid.$$
R_SERVERPID=../tests_pid.$$
TEMPFILES="$TMPFILES ${SERVEROUTFILE} ${SERVERPID}"
fileout=0 #FIXME, looks like all.sh tried to turn this on but actually didn't
#fileout=1
#verbose="-v" #FIXME - see where this is usefull
USER_NICKNAME=TestUser
NORM_EXT=""
if [ -n "$NSS_ENABLE_ECC" ] ; then
ECC_STRING=" - with ECC"
else
ECC_STRING=""
fi
CSHORT="-c ABCDEF:0041:0084cdefgijklmnvyz"
CLONG="-c ABCDEF:C001:C002:C003:C004:C005:C006:C007:C008:C009:C00A:C00B:C00C:C00D:C00E:C00F:C010:C011:C012:C013:C014:0041:0084cdefgijklmnvyz"
if [ "${OS_ARCH}" != "WINNT" ]; then
ulimit -n 1000 # make sure we have enough file descriptors
fi
cd ${CLIENTDIR}
}
########################### is_selfserv_alive ##########################
# local shell function to exit with a fatal error if selfserver is not
# running
########################################################################
is_selfserv_alive()
{
if [ ! -f "${SERVERPID}" ]; then
echo "$SCRIPTNAME: Error - selfserv PID file ${SERVERPID} doesn't exist"
sleep 5
if [ ! -f "${SERVERPID}" ]; then
Exit 9 "Fatal - selfserv pid file ${SERVERPID} does not exist"
fi
fi
if [ "${OS_ARCH}" = "WINNT" ] && \
[ "$OS_NAME" = "CYGWIN_NT" -o "$OS_NAME" = "MINGW32_NT" ]; then
PID=${SHELL_SERVERPID}
else
PID=`cat ${SERVERPID}`
fi
echo "kill -0 ${PID} >/dev/null 2>/dev/null"
kill -0 ${PID} >/dev/null 2>/dev/null || Exit 10 "Fatal - selfserv process not detectable"
echo "selfserv with PID ${PID} found at `date`"
}
########################### wait_for_selfserv ##########################
# local shell function to wait until selfserver is running and initialized
########################################################################
wait_for_selfserv()
{
echo "trying to connect to selfserv at `date`"
echo "tstclnt -p ${PORT} -h ${HOSTADDR} ${CLIENT_OPTIONS} -q \\"
echo " -d ${P_R_CLIENTDIR} -v < ${REQUEST_FILE}"
${BINDIR}/tstclnt -p ${PORT} -h ${HOSTADDR} ${CLIENT_OPTIONS} -q \
-d ${P_R_CLIENTDIR} -v < ${REQUEST_FILE}
if [ $? -ne 0 ]; then
sleep 5
echo "retrying to connect to selfserv at `date`"
echo "tstclnt -p ${PORT} -h ${HOSTADDR} ${CLIENT_OPTIONS} -q \\"
echo " -d ${P_R_CLIENTDIR} -v < ${REQUEST_FILE}"
${BINDIR}/tstclnt -p ${PORT} -h ${HOSTADDR} ${CLIENT_OPTIONS} -q \
-d ${P_R_CLIENTDIR} -v < ${REQUEST_FILE}
if [ $? -ne 0 ]; then
html_failed "Waiting for Server"
fi
fi
is_selfserv_alive
}
########################### kill_selfserv ##############################
# local shell function to kill the selfserver after the tests are done
########################################################################
kill_selfserv()
{
if [ "${OS_ARCH}" = "WINNT" ] && \
[ "$OS_NAME" = "CYGWIN_NT" -o "$OS_NAME" = "MINGW32_NT" ]; then
PID=${SHELL_SERVERPID}
else
PID=`cat ${SERVERPID}`
fi
echo "trying to kill selfserv with PID ${PID} at `date`"
if [ "${OS_ARCH}" = "WINNT" -o "${OS_ARCH}" = "WIN95" -o "${OS_ARCH}" = "OS2" ]; then
echo "${KILL} ${PID}"
${KILL} ${PID}
else
echo "${KILL} -USR1 ${PID}"
${KILL} -USR1 ${PID}
fi
wait ${PID}
if [ ${fileout} -eq 1 ]; then
cat ${SERVEROUTFILE}
fi
# On Linux selfserv needs up to 30 seconds to fully die and free
# the port. Wait until the port is free. (Bug 129701)
if [ "${OS_ARCH}" = "Linux" ]; then
echo "selfserv -b -p ${PORT} 2>/dev/null;"
until ${BINDIR}/selfserv -b -p ${PORT} 2>/dev/null; do
echo "RETRY: selfserv -b -p ${PORT} 2>/dev/null;"
sleep 1
done
fi
echo "selfserv with PID ${PID} killed at `date`"
rm ${SERVERPID}
html_detect_core "kill_selfserv core detection step"
}
########################### start_selfserv #############################
# local shell function to start the selfserver with the parameters required
# for this test and log information (parameters, start time)
# also: wait until the server is up and running
########################################################################
start_selfserv()
{
if [ -n "$testname" ] ; then
echo "$SCRIPTNAME: $testname ----"
fi
sparam=`echo $sparam | sed -e 's;_; ;g'`
if [ -n "$NSS_ENABLE_ECC" ] && \
[ -z "$NO_ECC_CERTS" -o "$NO_ECC_CERTS" != "1" ] ; then
ECC_OPTIONS="-e ${HOSTADDR}-ec"
else
ECC_OPTIONS=""
fi
if [ "$1" = "mixed" ]; then
ECC_OPTIONS="-e ${HOSTADDR}-ecmixed"
fi
echo "selfserv starting at `date`"
echo "selfserv -D -p ${PORT} -d ${P_R_SERVERDIR} -n ${HOSTADDR} ${SERVER_OPTIONS} \\"
echo " ${ECC_OPTIONS} -w nss ${sparam} -i ${R_SERVERPID} $verbose &"
if [ ${fileout} -eq 1 ]; then
${PROFTOOL} ${BINDIR}/selfserv -D -p ${PORT} -d ${P_R_SERVERDIR} -n ${HOSTADDR} ${SERVER_OPTIONS} \
${ECC_OPTIONS} -w nss ${sparam} -i ${R_SERVERPID} $verbose \
> ${SERVEROUTFILE} 2>&1 &
RET=$?
else
${PROFTOOL} ${BINDIR}/selfserv -D -p ${PORT} -d ${P_R_SERVERDIR} -n ${HOSTADDR} ${SERVER_OPTIONS} \
${ECC_OPTIONS} -w nss ${sparam} -i ${R_SERVERPID} $verbose &
RET=$?
fi
# The PID $! returned by the MKS or Cygwin shell is not the PID of
# the real background process, but rather the PID of a helper
# process (sh.exe). MKS's kill command has a bug: invoking kill
# on the helper process does not terminate the real background
# process. Our workaround has been to have selfserv save its PID
# in the ${SERVERPID} file and "kill" that PID instead. But this
# doesn't work under Cygwin; its kill command doesn't recognize
# the PID of the real background process, but it does work on the
# PID of the helper process. So we save the value of $! in the
# SHELL_SERVERPID variable, and use it instead of the ${SERVERPID}
# file under Cygwin. (In fact, this should work in any shell
# other than the MKS shell.)
SHELL_SERVERPID=$!
wait_for_selfserv
if [ "${OS_ARCH}" = "WINNT" ] && \
[ "$OS_NAME" = "CYGWIN_NT" -o "$OS_NAME" = "MINGW32_NT" ]; then
PID=${SHELL_SERVERPID}
else
PID=`cat ${SERVERPID}`
fi
echo "selfserv with PID ${PID} started at `date`"
}
############################## ssl_cov #################################
# local shell function to perform SSL Cipher Coverage tests
########################################################################
ssl_cov()
{
html_head "SSL Cipher Coverage $NORM_EXT - server $SERVER_MODE/client $CLIENT_MODE $ECC_STRING"
testname=""
if [ -n "$NSS_ENABLE_ECC" ] ; then
sparam="$CLONG"
else
sparam="$CSHORT"
fi
mixed=0
start_selfserv # Launch the server
exec < ${SSLCOV}
while read ectype tls param testname
do
echo "${testname}" | grep "EXPORT" > /dev/null
EXP=$?
echo "${testname}" | grep "SSL2" > /dev/null
SSL2=$?
if [ "$NORM_EXT" = "Extended Test" -a "${SSL2}" -eq 0 ] ; then
echo "$SCRIPTNAME: skipping $testname for $NORM_EXT"
elif [ "$ectype" = "ECC" -a -z "$NSS_ENABLE_ECC" ] ; then
echo "$SCRIPTNAME: skipping $testname (ECC only)"
elif [ "$SERVER_MODE" = "fips" -o "$CLIENT_MODE" = "fips" ] && [ "$SSL2" -eq 0 -o "$EXP" -eq 0 ] ; then
echo "$SCRIPTNAME: skipping $testname (non-FIPS only)"
elif [ "$ectype" != "#" ] ; then
echo "$SCRIPTNAME: running $testname ----------------------------"
TLS_FLAG=-T
if [ "$tls" = "TLS" ]; then
TLS_FLAG=""
fi
# These five tests need an EC cert signed with RSA
# This requires a different certificate loaded in selfserv
# due to a (current) NSS limitation of only loaded one cert
# per type so the default selfserv setup will not work.
#:C00B TLS ECDH RSA WITH NULL SHA
#:C00C TLS ECDH RSA WITH RC4 128 SHA
#:C00D TLS ECDH RSA WITH 3DES EDE CBC SHA
#:C00E TLS ECDH RSA WITH AES 128 CBC SHA
#:C00F TLS ECDH RSA WITH AES 256 CBC SHA
if [ $mixed -eq 0 ]; then
if [ "${param}" = ":C00B" -o "${param}" = ":C00C" -o "${param}" = ":C00D" -o "${param}" = ":C00E" -o "${param}" = ":C00F" ]; then
kill_selfserv
start_selfserv mixed
mixed=1
else
is_selfserv_alive
fi
else
if [ "${param}" = ":C00B" -o "${param}" = ":C00C" -o "${param}" = ":C00D" -o "${param}" = ":C00E" -o "${param}" = ":C00F" ]; then
is_selfserv_alive
else
kill_selfserv
start_selfserv
mixed=0
fi
fi
echo "tstclnt -p ${PORT} -h ${HOSTADDR} -c ${param} ${TLS_FLAG} ${CLIENT_OPTIONS} \\"
echo " -f -d ${P_R_CLIENTDIR} -v -w nss < ${REQUEST_FILE}"
rm ${TMP}/$HOST.tmp.$$ 2>/dev/null
${PROFTOOL} ${BINDIR}/tstclnt -p ${PORT} -h ${HOSTADDR} -c ${param} ${TLS_FLAG} ${CLIENT_OPTIONS} -f \
-d ${P_R_CLIENTDIR} -v -w nss < ${REQUEST_FILE} \
>${TMP}/$HOST.tmp.$$ 2>&1
ret=$?
cat ${TMP}/$HOST.tmp.$$
rm ${TMP}/$HOST.tmp.$$ 2>/dev/null
html_msg $ret 0 "${testname}" \
"produced a returncode of $ret, expected is 0"
fi
done
kill_selfserv
html "</TABLE><BR>"
}
############################## ssl_auth ################################
# local shell function to perform SSL Client Authentication tests
########################################################################
ssl_auth()
{
html_head "SSL Client Authentication $NORM_EXT - server $SERVER_MODE/client $CLIENT_MODE $ECC_STRING"
exec < ${SSLAUTH}
while read ectype value sparam cparam testname
do
echo "${testname}" | grep "don't require client auth" > /dev/null
CAUTH=$?
if [ "${CLIENT_MODE}" = "fips" -a "${CAUTH}" -eq 0 ] ; then
echo "$SCRIPTNAME: skipping $testname (non-FIPS only)"
elif [ "$ectype" = "ECC" -a -z "$NSS_ENABLE_ECC" ] ; then
echo "$SCRIPTNAME: skipping $testname (ECC only)"
elif [ "$ectype" != "#" ]; then
cparam=`echo $cparam | sed -e 's;_; ;g' -e "s/TestUser/$USER_NICKNAME/g" `
start_selfserv
echo "tstclnt -p ${PORT} -h ${HOSTADDR} -f -d ${P_R_CLIENTDIR} -v ${CLIENT_OPTIONS} \\"
echo " ${cparam} < ${REQUEST_FILE}"
rm ${TMP}/$HOST.tmp.$$ 2>/dev/null
${PROFTOOL} ${BINDIR}/tstclnt -p ${PORT} -h ${HOSTADDR} -f ${cparam} ${CLIENT_OPTIONS} \
-d ${P_R_CLIENTDIR} -v < ${REQUEST_FILE} \
>${TMP}/$HOST.tmp.$$ 2>&1
ret=$?
cat ${TMP}/$HOST.tmp.$$
rm ${TMP}/$HOST.tmp.$$ 2>/dev/null
#workaround for bug #402058
[ $ret -ne 0 ] && ret=1
[ $value -ne 0 ] && value=1
html_msg $ret $value "${testname}" \
"produced a returncode of $ret, expected is $value"
kill_selfserv
fi
done
html "</TABLE><BR>"
}
############################## ssl_stress ##############################
# local shell function to perform SSL stress test
########################################################################
ssl_stress()
{
html_head "SSL Stress Test $NORM_EXT - server $SERVER_MODE/client $CLIENT_MODE $ECC_STRING"
exec < ${SSLSTRESS}
while read ectype value sparam cparam testname
do
if [ -z "$ectype" ]; then
# silently ignore blank lines
continue
fi
echo "${testname}" | grep "SSL2" > /dev/null
SSL2=$?
echo "${testname}" | grep "client auth" > /dev/null
CAUTH=$?
if [ "${SSL2}" -eq 0 -a "$NORM_EXT" = "Extended Test" ] ; then
echo "$SCRIPTNAME: skipping $testname for $NORM_EXT"
elif [ "$ectype" = "ECC" -a -z "$NSS_ENABLE_ECC" ] ; then
echo "$SCRIPTNAME: skipping $testname (ECC only)"
elif [ "${SERVER_MODE}" = "fips" -o "${CLIENT_MODE}" = "fips" ] && [ "${SSL2}" -eq 0 ] ; then
echo "$SCRIPTNAME: skipping $testname (non-FIPS only)"
elif [ "${CLIENT_MODE}" = "fips" -a "${CAUTH}" -ne 0 ] ; then
echo "$SCRIPTNAME: skipping $testname (non-FIPS only)"
elif [ "$ectype" != "#" ]; then
cparam=`echo $cparam | sed -e 's;_; ;g' -e "s/TestUser/$USER_NICKNAME/g" `
# These tests need the mixed cert
# Stress TLS ECDH-RSA AES 128 CBC with SHA (no reuse)
# Stress TLS ECDH-RSA AES 128 CBC with SHA (no reuse, client auth)
p=`echo "$sparam" | sed -e "s/\(.*\)\(-c_:C0..\)\(.*\)/\2/"`;
if [ "$p" = "-c_:C00E" ]; then
start_selfserv mixed
else
start_selfserv
fi
if [ "`uname -n`" = "sjsu" ] ; then
echo "debugging disapering selfserv... ps -ef | grep selfserv"
ps -ef | grep selfserv
fi
echo "strsclnt -q -p ${PORT} -d ${P_R_CLIENTDIR} ${CLIENT_OPTIONS} -w nss $cparam \\"
echo " $verbose ${HOSTADDR}"
echo "strsclnt started at `date`"
${PROFTOOL} ${BINDIR}/strsclnt -q -p ${PORT} -d ${P_R_CLIENTDIR} ${CLIENT_OPTIONS} -w nss $cparam \
$verbose ${HOSTADDR}
ret=$?
echo "strsclnt completed at `date`"
html_msg $ret $value \
"${testname}" \
"produced a returncode of $ret, expected is $value. "
if [ "`uname -n`" = "sjsu" ] ; then
echo "debugging disapering selfserv... ps -ef | grep selfserv"
ps -ef | grep selfserv
fi
kill_selfserv
fi
done
html "</TABLE><BR>"
}
############################ ssl_crl_ssl ###############################
# local shell function to perform SSL test with/out revoked certs tests
########################################################################
ssl_crl_ssl()
{
html_head "CRL SSL Client Tests $NORM_EXT $ECC_STRING"
# Using First CRL Group for this test. There are $CRL_GRP_1_RANGE certs in it.
# Cert number $UNREVOKED_CERT_GRP_1 was not revoked
CRL_GROUP_BEGIN=$CRL_GRP_1_BEGIN
CRL_GROUP_RANGE=$CRL_GRP_1_RANGE
UNREVOKED_CERT=$UNREVOKED_CERT_GRP_1
exec < ${SSLAUTH}
while read ectype value sparam cparam testname
do
if [ "$ectype" = "ECC" -a -z "$NSS_ENABLE_ECC" ] ; then
echo "$SCRIPTNAME: skipping $testname (ECC only)"
elif [ "$ectype" != "#" ]; then
servarg=`echo $sparam | awk '{r=split($0,a,"-r") - 1;print r;}'`
pwd=`echo $cparam | grep nss`
user=`echo $cparam | grep TestUser`
_cparam=$cparam
case $servarg in
1) if [ -z "$pwd" -o -z "$user" ]; then
rev_modvalue=0
else
rev_modvalue=254
fi
;;
2) rev_modvalue=254 ;;
3) if [ -z "$pwd" -o -z "$user" ]; then
rev_modvalue=0
else
rev_modvalue=1
fi
;;
4) rev_modvalue=1 ;;
esac
TEMP_NUM=0
while [ $TEMP_NUM -lt $CRL_GROUP_RANGE ]
do
CURR_SER_NUM=`expr ${CRL_GROUP_BEGIN} + ${TEMP_NUM}`
TEMP_NUM=`expr $TEMP_NUM + 1`
USER_NICKNAME="TestUser${CURR_SER_NUM}"
cparam=`echo $_cparam | sed -e 's;_; ;g' -e "s/TestUser/$USER_NICKNAME/g" `
start_selfserv
echo "tstclnt -p ${PORT} -h ${HOSTADDR} -f -d ${R_CLIENTDIR} -v \\"
echo " ${cparam} < ${REQUEST_FILE}"
rm ${TMP}/$HOST.tmp.$$ 2>/dev/null
${PROFTOOL} ${BINDIR}/tstclnt -p ${PORT} -h ${HOSTADDR} -f ${cparam} \
-d ${R_CLIENTDIR} -v < ${REQUEST_FILE} \
>${TMP}/$HOST.tmp.$$ 2>&1
ret=$?
cat ${TMP}/$HOST.tmp.$$
rm ${TMP}/$HOST.tmp.$$ 2>/dev/null
if [ $CURR_SER_NUM -ne $UNREVOKED_CERT ]; then
modvalue=$rev_modvalue
testAddMsg="revoked"
else
testAddMsg="not revoked"
modvalue=$value
fi
html_msg $ret $modvalue "${testname} (cert ${USER_NICKNAME} - $testAddMsg)" \
"produced a returncode of $ret, expected is $modvalue"
kill_selfserv
done
fi
done
html "</TABLE><BR>"
}
############################# is_revoked ###############################
# local shell function to check if certificate is revoked
########################################################################
is_revoked() {
certNum=$1
currLoadedGrp=$2
found=0
ownerGrp=1
while [ $ownerGrp -le $TOTAL_GRP_NUM -a $found -eq 0 ]
do
currGrpBegin=`eval echo \$\{CRL_GRP_${ownerGrp}_BEGIN\}`
currGrpRange=`eval echo \$\{CRL_GRP_${ownerGrp}_RANGE\}`
currGrpEnd=`expr $currGrpBegin + $currGrpRange - 1`
if [ $certNum -ge $currGrpBegin -a $certNum -le $currGrpEnd ]; then
found=1
else
ownerGrp=`expr $ownerGrp + 1`
fi
done
if [ $found -eq 1 -a $currLoadedGrp -lt $ownerGrp ]; then
return 1
fi
if [ $found -eq 0 ]; then
return 1
fi
unrevokedGrpCert=`eval echo \$\{UNREVOKED_CERT_GRP_${ownerGrp}\}`
if [ $certNum -eq $unrevokedGrpCert ]; then
return 1
fi
return 0
}
########################### load_group_crl #############################
# local shell function to load CRL
########################################################################
load_group_crl() {
group=$1
ectype=$2
OUTFILE_TMP=${TMP}/$HOST.tmp.$$
grpBegin=`eval echo \$\{CRL_GRP_${group}_BEGIN\}`
grpRange=`eval echo \$\{CRL_GRP_${group}_RANGE\}`
grpEnd=`expr $grpBegin + $grpRange - 1`
if [ "$grpBegin" = "" -o "$grpRange" = "" ]; then
ret=1
return 1;
fi
# Add -ec suffix for ECC
if [ "$ectype" = "ECC" ] ; then
ecsuffix="-ec"
eccomment="ECC "
else
ecsuffix=""
eccomment=""
fi
if [ "$RELOAD_CRL" != "" ]; then
if [ $group -eq 1 ]; then
echo "==================== Resetting to group 1 crl ==================="
kill_selfserv
start_selfserv
is_selfserv_alive
fi
echo "================= Reloading ${eccomment}CRL for group $grpBegin - $grpEnd ============="
echo "tstclnt -p ${PORT} -h ${HOSTADDR} -f -d ${R_CLIENTDIR} -v \\"
echo " -w nss -n TestUser${UNREVOKED_CERT_GRP_1}${ecsuffix}"
echo "Request:"
echo "GET crl://${SERVERDIR}/root.crl_${grpBegin}-${grpEnd}${ecsuffix}"
echo ""
echo "RELOAD time $i"
${PROFTOOL} ${BINDIR}/tstclnt -p ${PORT} -h ${HOSTADDR} -f \
-d ${R_CLIENTDIR} -v -w nss -n TestUser${UNREVOKED_CERT_GRP_1}${ecsuffix} \
>${OUTFILE_TMP} 2>&1 <<_EOF_REQUEST_
GET crl://${SERVERDIR}/root.crl_${grpBegin}-${grpEnd}${ecsuffix}
_EOF_REQUEST_
cat ${OUTFILE_TMP}
grep "CRL ReCache Error" ${OUTFILE_TMP}
if [ $? -eq 0 ]; then
ret=1
return 1
fi
else
echo "=== Updating DB for group $grpBegin - $grpEnd and restarting selfserv ====="
kill_selfserv
CU_ACTION="Importing ${eccomment}CRL for groups $grpBegin - $grpEnd"
crlu -d ${R_SERVERDIR} -I -i ${SERVERDIR}/root.crl_${grpBegin}-${grpEnd}${ecsuffix} \
-p ../tests.pw.928
ret=$?
if [ "$ret" -eq 0 ]; then
html_passed "${CU_ACTION}"
return 1
fi
start_selfserv
fi
is_selfserv_alive
ret=$?
echo "================= CRL Reloaded ============="
}
########################### ssl_crl_cache ##############################
# local shell function to perform SSL test for crl cache functionality
# with/out revoked certs
########################################################################
ssl_crl_cache()
{
html_head "Cache CRL SSL Client Tests $NORM_EXT $ECC_STRING"
SSLAUTH_TMP=${TMP}/authin.tl.tmp
SERV_ARG=-r_-r
rm -f ${SSLAUTH_TMP}
echo ${SSLAUTH_TMP}
grep -- " $SERV_ARG " ${SSLAUTH} | grep -v "^#" | grep -v none | grep -v bogus > ${SSLAUTH_TMP}
echo $?
while [ $? -eq 0 -a -f ${SSLAUTH_TMP} ]
do
sparam=$SERV_ARG
start_selfserv
exec < ${SSLAUTH_TMP}
while read ectype value sparam cparam testname
do
if [ "$ectype" = "ECC" -a -z "$NSS_ENABLE_ECC" ] ; then
echo "$SCRIPTNAME: skipping $testname (ECC only)"
else
servarg=`echo $sparam | awk '{r=split($0,a,"-r") - 1;print r;}'`
pwd=`echo $cparam | grep nss`
user=`echo $cparam | grep TestUser`
_cparam=$cparam
case $servarg in
1) if [ -z "$pwd" -o -z "$user" ]; then
rev_modvalue=0
else
rev_modvalue=254
fi
;;
2) rev_modvalue=254 ;;
3) if [ -z "$pwd" -o -z "$user" ]; then
rev_modvalue=0
else
rev_modvalue=1
fi
;;
4) rev_modvalue=1 ;;
esac
TEMP_NUM=0
LOADED_GRP=1
while [ ${LOADED_GRP} -le ${TOTAL_GRP_NUM} ]
do
while [ $TEMP_NUM -lt $TOTAL_CRL_RANGE ]
do
CURR_SER_NUM=`expr ${CRL_GRP_1_BEGIN} + ${TEMP_NUM}`
TEMP_NUM=`expr $TEMP_NUM + 1`
USER_NICKNAME="TestUser${CURR_SER_NUM}"
cparam=`echo $_cparam | sed -e 's;_; ;g' -e "s/TestUser/$USER_NICKNAME/g" `
echo "Server Args: $SERV_ARG"
echo "tstclnt -p ${PORT} -h ${HOSTADDR} -f -d ${R_CLIENTDIR} -v \\"
echo " ${cparam} < ${REQUEST_FILE}"
rm ${TMP}/$HOST.tmp.$$ 2>/dev/null
${PROFTOOL} ${BINDIR}/tstclnt -p ${PORT} -h ${HOSTADDR} -f ${cparam} \
-d ${R_CLIENTDIR} -v < ${REQUEST_FILE} \
>${TMP}/$HOST.tmp.$$ 2>&1
ret=$?
cat ${TMP}/$HOST.tmp.$$
rm ${TMP}/$HOST.tmp.$$ 2>/dev/null
is_revoked ${CURR_SER_NUM} ${LOADED_GRP}
isRevoked=$?
if [ $isRevoked -eq 0 ]; then
modvalue=$rev_modvalue
testAddMsg="revoked"
else
modvalue=$value
testAddMsg="not revoked"
fi
is_selfserv_alive
ss_status=$?
if [ "$ss_status" -ne 0 ]; then
html_msg $ret $modvalue \
"${testname}(cert ${USER_NICKNAME} - $testAddMsg)" \
"produced a returncode of $ret, expected is $modvalue. " \
"selfserv is not alive!"
else
html_msg $ret $modvalue \
"${testname}(cert ${USER_NICKNAME} - $testAddMsg)" \
"produced a returncode of $ret, expected is $modvalue"
fi
done
LOADED_GRP=`expr $LOADED_GRP + 1`
TEMP_NUM=0
if [ "$LOADED_GRP" -le "$TOTAL_GRP_NUM" ]; then
load_group_crl $LOADED_GRP $ectype
html_msg $ret 0 "Load group $LOADED_GRP ${eccomment}crl " \
"produced a returncode of $ret, expected is 0"
fi
done
# Restart selfserv to roll back to two initial group 1 crls
# TestCA CRL and TestCA-ec CRL
kill_selfserv
start_selfserv
fi
done
kill_selfserv
SERV_ARG="${SERV_ARG}_-r"
rm -f ${SSLAUTH_TMP}
grep -- " $SERV_ARG " ${SSLAUTH} | grep -v none | grep -v bogus > ${SSLAUTH_TMP}
done
TEMPFILES=${SSLAUTH_TMP}
html "</TABLE><BR>"
}
############################## ssl_cleanup #############################
# local shell function to finish this script (no exit since it might be
# sourced)
########################################################################
ssl_cleanup()
{
rm $SERVERPID 2>/dev/null
cd ${QADIR}
. common/cleanup.sh
}
############################## ssl_run #################################
# local shell function to run coverage, authentication and stress tests
########################################################################
ssl_run()
{
for SSL_RUN in ${NSS_SSL_RUN}
do
case "${SSL_RUN}" in
"cov")
ssl_cov
;;
"auth")
ssl_auth
;;
"stress")
ssl_stress
;;
esac
done
}
############################ ssl_run_all ###############################
# local shell function to run both standard and extended ssl tests
########################################################################
ssl_run_all()
{
ORIG_SERVERDIR=$SERVERDIR
ORIG_CLIENTDIR=$CLIENTDIR
ORIG_R_SERVERDIR=$R_SERVERDIR
ORIG_R_CLIENTDIR=$R_CLIENTDIR
ORIG_P_R_SERVERDIR=$P_R_SERVERDIR
ORIG_P_R_CLIENTDIR=$P_R_CLIENTDIR
USER_NICKNAME=TestUser
NORM_EXT=""
cd ${CLIENTDIR}
ssl_run
SERVERDIR=$EXT_SERVERDIR
CLIENTDIR=$EXT_CLIENTDIR
R_SERVERDIR=$R_EXT_SERVERDIR
R_CLIENTDIR=$R_EXT_CLIENTDIR
P_R_SERVERDIR=$P_R_EXT_SERVERDIR
P_R_CLIENTDIR=$P_R_EXT_CLIENTDIR
USER_NICKNAME=ExtendedSSLUser
NORM_EXT="Extended Test"
cd ${CLIENTDIR}
ssl_run
# the next round of ssl tests will only run if these vars are reset
SERVERDIR=$ORIG_SERVERDIR
CLIENTDIR=$ORIG_CLIENTDIR
R_SERVERDIR=$ORIG_R_SERVERDIR
R_CLIENTDIR=$ORIG_R_CLIENTDIR
P_R_SERVERDIR=$ORIG_P_R_SERVERDIR
P_R_CLIENTDIR=$ORIG_P_R_CLIENTDIR
USER_NICKNAME=TestUser
NORM_EXT=
cd ${QADIR}/ssl
}
############################ ssl_set_fips ##############################
# local shell function to set FIPS mode on/off
########################################################################
ssl_set_fips()
{
CLTSRV=$1
ONOFF=$2
if [ ${CLTSRV} = "server" ]; then
DBDIRS="${SERVERDIR} ${EXT_SERVERDIR}"
else
DBDIRS="${CLIETNDIR} ${EXT_CLIENTDIR}"
fi
if [ "${ONOFF}" = "on" ]; then
FIPSMODE=true
RET_EXP=0
else
FIPSMODE=false
RET_EXP=1
fi
html_head "SSL - FIPS mode ${ONOFF} for ${CLTSRV}"
for DBDIR in ${DBDIRS}
do
EXT_OPT=
echo ${DBDIR} | grep ext > /dev/null
if [ $? -eq 0 ]; then
EXT_OPT="extended "
fi
echo "${SCRIPTNAME}: Turning FIPS ${ONOFF} for the ${EXT_OPT} ${CLTSRV}"
echo "modutil -dbdir ${DBDIR} -fips ${FIPSMODE} -force"
${BINDIR}/modutil -dbdir ${DBDIR} -fips ${FIPSMODE} -force 2>&1
RET=$?
html_msg "${RET}" "0" "${TESTNAME} (modutil -fips ${FIPSMODE})" \
"produced a returncode of ${RET}, expected is 0"
echo "modutil -dbdir ${DBDIR} -list"
DBLIST=`${BINDIR}/modutil -dbdir ${DBDIR} -list 2>&1`
RET=$?
html_msg "${RET}" "0" "${TESTNAME} (modutil -list)" \
"produced a returncode of ${RET}, expected is 0"
echo "${DBLIST}" | grep "FIPS PKCS #11"
RET=$?
html_msg "${RET}" "${RET_EXP}" "${TESTNAME} (grep \"FIPS PKCS #11\")" \
"produced a returncode of ${RET}, expected is ${RET_EXP}"
done
html "</TABLE><BR>"
}
############################ ssl_set_fips ##############################
# local shell function to run all tests set in NSS_SSL_TESTS variable
########################################################################
ssl_run_tests()
{
for SSL_TEST in ${NSS_SSL_TESTS}
do
case "${SSL_TEST}" in
"crl")
ssl_crl_ssl
ssl_crl_cache
;;
"iopr")
ssl_iopr_run
;;
*)
SERVER_MODE=`echo "${SSL_TEST}" | cut -d_ -f1`
CLIENT_MODE=`echo "${SSL_TEST}" | cut -d_ -f2`
case "${SERVER_MODE}" in
"normal")
SERVER_OPTIONS=
;;
"bypass")
SERVER_OPTIONS="-B -s"
;;
"fips")
SERVER_OPTIONS=
ssl_set_fips server on
;;
*)
echo "${SCRIPTNAME}: Error: Unknown server mode ${SERVER_MODE}"
continue
;;
esac
case "${CLIENT_MODE}" in
"normal")
CLIENT_OPTIONS=
;;
"bypass")
CLIENT_OPTIONS="-B -s"
;;
"fips")
SERVER_OPTIONS=
ssl_set_fips client on
;;
*)
echo "${SCRIPTNAME}: Error: Unknown client mode ${CLIENT_MODE}"
continue
;;
esac
ssl_run_all
if [ "${SERVER_MODE}" = "fips" ]; then
ssl_set_fips server off
fi
if [ "${CLIENT_MODE}" = "fips" ]; then
ssl_set_fips client off
fi
;;
esac
done
}
################################# main #################################
ssl_init
ssl_run_tests
ssl_cleanup
Reference in New Issue View Git Blame Copy Permalink