gecko/hal/gonk/GonkHal.cpp

1166 lines
30 KiB
C++

/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set sw=2 ts=8 et ft=cpp : */
/* Copyright 2012 Mozilla Foundation and Mozilla contributors
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include <errno.h>
#include <fcntl.h>
#include <linux/android_alarm.h>
#include <math.h>
#include <stdio.h>
#include <sys/syscall.h>
#include <sys/resource.h>
#include <time.h>
#include <asm/page.h>
#include "mozilla/DebugOnly.h"
#include "android/log.h"
#include "cutils/properties.h"
#include "hardware/hardware.h"
#include "hardware/lights.h"
#include "hardware_legacy/uevent.h"
#include "hardware_legacy/vibrator.h"
#include "hardware_legacy/power.h"
#include "base/message_loop.h"
#include "Hal.h"
#include "HalImpl.h"
#include "mozilla/dom/battery/Constants.h"
#include "mozilla/FileUtils.h"
#include "mozilla/Monitor.h"
#include "mozilla/Services.h"
#include "mozilla/StaticPtr.h"
#include "mozilla/Preferences.h"
#include "nsAlgorithm.h"
#include "nsPrintfCString.h"
#include "nsIObserver.h"
#include "nsIObserverService.h"
#include "nsIRecoveryService.h"
#include "nsIRunnable.h"
#include "nsScreenManagerGonk.h"
#include "nsThreadUtils.h"
#include "nsThreadUtils.h"
#include "nsIThread.h"
#include "nsXULAppAPI.h"
#include "OrientationObserver.h"
#include "UeventPoller.h"
#include <algorithm>
#define LOG(args...) __android_log_print(ANDROID_LOG_INFO, "Gonk", args)
#define NsecPerMsec 1000000LL
#define NsecPerSec 1000000000
// The header linux/oom.h is not available in bionic libc. We
// redefine some of its constants here.
#ifndef OOM_DISABLE
#define OOM_DISABLE (-17)
#endif
#ifndef OOM_ADJUST_MIN
#define OOM_ADJUST_MIN (-16)
#endif
#ifndef OOM_ADJUST_MAX
#define OOM_ADJUST_MAX 15
#endif
#ifndef OOM_SCORE_ADJ_MIN
#define OOM_SCORE_ADJ_MIN (-1000)
#endif
#ifndef OOM_SCORE_ADJ_MAX
#define OOM_SCORE_ADJ_MAX 1000
#endif
#ifndef BATTERY_CHARGING_ARGB
#define BATTERY_CHARGING_ARGB 0x00FF0000
#endif
#ifndef BATTERY_FULL_ARGB
#define BATTERY_FULL_ARGB 0x0000FF00
#endif
using namespace mozilla;
using namespace mozilla::hal;
namespace mozilla {
namespace hal_impl {
namespace {
/**
* This runnable runs for the lifetime of the program, once started. It's
* responsible for "playing" vibration patterns.
*/
class VibratorRunnable
: public nsIRunnable
, public nsIObserver
{
public:
VibratorRunnable()
: mMonitor("VibratorRunnable")
, mIndex(0)
{
nsCOMPtr<nsIObserverService> os = services::GetObserverService();
if (!os) {
NS_WARNING("Could not get observer service!");
return;
}
os->AddObserver(this, NS_XPCOM_SHUTDOWN_OBSERVER_ID, false);
}
NS_DECL_ISUPPORTS
NS_DECL_NSIRUNNABLE
NS_DECL_NSIOBSERVER
// Run on the main thread, not the vibrator thread.
void Vibrate(const nsTArray<uint32_t> &pattern);
void CancelVibrate();
static bool ShuttingDown() { return sShuttingDown; }
private:
Monitor mMonitor;
// The currently-playing pattern.
nsTArray<uint32_t> mPattern;
// The index we're at in the currently-playing pattern. If mIndex >=
// mPattern.Length(), then we're not currently playing anything.
uint32_t mIndex;
// Set to true in our shutdown observer. When this is true, we kill the
// vibrator thread.
static bool sShuttingDown;
};
NS_IMPL_THREADSAFE_ISUPPORTS2(VibratorRunnable, nsIRunnable, nsIObserver);
bool VibratorRunnable::sShuttingDown = false;
static nsRefPtr<VibratorRunnable> sVibratorRunnable;
NS_IMETHODIMP
VibratorRunnable::Run()
{
MonitorAutoLock lock(mMonitor);
// We currently assume that mMonitor.Wait(X) waits for X milliseconds. But in
// reality, the kernel might not switch to this thread for some time after the
// wait expires. So there's potential for some inaccuracy here.
//
// This doesn't worry me too much. Note that we don't even start vibrating
// immediately when VibratorRunnable::Vibrate is called -- we go through a
// condvar onto another thread. Better just to be chill about small errors in
// the timing here.
while (!sShuttingDown) {
if (mIndex < mPattern.Length()) {
uint32_t duration = mPattern[mIndex];
if (mIndex % 2 == 0) {
vibrator_on(duration);
}
mIndex++;
mMonitor.Wait(PR_MillisecondsToInterval(duration));
}
else {
mMonitor.Wait();
}
}
sVibratorRunnable = NULL;
return NS_OK;
}
NS_IMETHODIMP
VibratorRunnable::Observe(nsISupports *subject, const char *topic,
const PRUnichar *data)
{
MOZ_ASSERT(strcmp(topic, NS_XPCOM_SHUTDOWN_OBSERVER_ID) == 0);
MonitorAutoLock lock(mMonitor);
sShuttingDown = true;
mMonitor.Notify();
return NS_OK;
}
void
VibratorRunnable::Vibrate(const nsTArray<uint32_t> &pattern)
{
MonitorAutoLock lock(mMonitor);
mPattern = pattern;
mIndex = 0;
mMonitor.Notify();
}
void
VibratorRunnable::CancelVibrate()
{
MonitorAutoLock lock(mMonitor);
mPattern.Clear();
mPattern.AppendElement(0);
mIndex = 0;
mMonitor.Notify();
}
void
EnsureVibratorThreadInitialized()
{
if (sVibratorRunnable) {
return;
}
sVibratorRunnable = new VibratorRunnable();
nsCOMPtr<nsIThread> thread;
NS_NewThread(getter_AddRefs(thread), sVibratorRunnable);
}
} // anonymous namespace
void
Vibrate(const nsTArray<uint32_t> &pattern, const hal::WindowIdentifier &)
{
MOZ_ASSERT(NS_IsMainThread());
if (VibratorRunnable::ShuttingDown()) {
return;
}
EnsureVibratorThreadInitialized();
sVibratorRunnable->Vibrate(pattern);
}
void
CancelVibrate(const hal::WindowIdentifier &)
{
MOZ_ASSERT(NS_IsMainThread());
if (VibratorRunnable::ShuttingDown()) {
return;
}
EnsureVibratorThreadInitialized();
sVibratorRunnable->CancelVibrate();
}
namespace {
class BatteryUpdater : public nsRunnable {
public:
NS_IMETHOD Run()
{
hal::BatteryInformation info;
hal_impl::GetCurrentBatteryInformation(&info);
// Control the battery indicator (led light) here using BatteryInformation
// we just retrieved.
uint32_t color = 0; // Format: 0x00rrggbb.
if (info.charging() && (info.level() == 1)) {
// Charging and battery full.
color = BATTERY_FULL_ARGB;
} else if (info.charging() && (info.level() < 1)) {
// Charging but not full.
color = BATTERY_CHARGING_ARGB;
} // else turn off battery indicator.
hal::LightConfiguration aConfig(hal::eHalLightID_Battery,
hal::eHalLightMode_User,
hal::eHalLightFlash_None,
0,
0,
color);
hal_impl::SetLight(hal::eHalLightID_Battery, aConfig);
hal::NotifyBatteryChange(info);
return NS_OK;
}
};
} // anonymous namespace
class BatteryObserver : public IUeventObserver,
public RefCounted<BatteryObserver>
{
public:
BatteryObserver()
:mUpdater(new BatteryUpdater())
{
}
virtual void Notify(const NetlinkEvent &aEvent)
{
// this will run on IO thread
NetlinkEvent *event = const_cast<NetlinkEvent*>(&aEvent);
const char *subsystem = event->getSubsystem();
// e.g. DEVPATH=/devices/platform/sec-battery/power_supply/battery
const char *devpath = event->findParam("DEVPATH");
if (strcmp(subsystem, "power_supply") == 0 &&
strstr(devpath, "battery")) {
// aEvent will be valid only in this method.
NS_DispatchToMainThread(mUpdater);
}
}
private:
nsRefPtr<BatteryUpdater> mUpdater;
};
// sBatteryObserver is owned by the IO thread. Only the IO thread may
// create or destroy it.
static StaticRefPtr<BatteryObserver> sBatteryObserver;
static void
RegisterBatteryObserverIOThread()
{
MOZ_ASSERT(MessageLoop::current() == XRE_GetIOMessageLoop());
MOZ_ASSERT(!sBatteryObserver);
sBatteryObserver = new BatteryObserver();
RegisterUeventListener(sBatteryObserver);
}
void
EnableBatteryNotifications()
{
XRE_GetIOMessageLoop()->PostTask(
FROM_HERE,
NewRunnableFunction(RegisterBatteryObserverIOThread));
}
static void
UnregisterBatteryObserverIOThread()
{
MOZ_ASSERT(MessageLoop::current() == XRE_GetIOMessageLoop());
MOZ_ASSERT(sBatteryObserver);
UnregisterUeventListener(sBatteryObserver);
sBatteryObserver = NULL;
}
void
DisableBatteryNotifications()
{
XRE_GetIOMessageLoop()->PostTask(
FROM_HERE,
NewRunnableFunction(UnregisterBatteryObserverIOThread));
}
static bool
GetCurrentBatteryCharge(int* aCharge)
{
bool success = ReadSysFile("/sys/class/power_supply/battery/capacity",
aCharge);
if (!success) {
return false;
}
#ifdef DEBUG
if ((*aCharge < 0) || (*aCharge > 100)) {
HAL_LOG(("charge level contains unknown value: %d", *aCharge));
}
#endif
return (*aCharge >= 0) && (*aCharge <= 100);
}
static bool
GetCurrentBatteryCharging(int* aCharging)
{
static const int BATTERY_NOT_CHARGING = 0;
static const int BATTERY_CHARGING_USB = 1;
static const int BATTERY_CHARGING_AC = 2;
// Generic device support
int chargingSrc;
bool success =
ReadSysFile("/sys/class/power_supply/battery/charging_source", &chargingSrc);
if (success) {
#ifdef DEBUG
if (chargingSrc != BATTERY_NOT_CHARGING &&
chargingSrc != BATTERY_CHARGING_USB &&
chargingSrc != BATTERY_CHARGING_AC) {
HAL_LOG(("charging_source contained unknown value: %d", chargingSrc));
}
#endif
*aCharging = (chargingSrc == BATTERY_CHARGING_USB ||
chargingSrc == BATTERY_CHARGING_AC);
return true;
}
// Otoro device support
char chargingSrcString[16];
success = ReadSysFile("/sys/class/power_supply/battery/status",
chargingSrcString, sizeof(chargingSrcString));
if (success) {
*aCharging = strcmp(chargingSrcString, "Charging") == 0 ||
strcmp(chargingSrcString, "Full") == 0;
return true;
}
return false;
}
void
GetCurrentBatteryInformation(hal::BatteryInformation* aBatteryInfo)
{
int charge;
if (GetCurrentBatteryCharge(&charge)) {
aBatteryInfo->level() = (double)charge / 100.0;
} else {
aBatteryInfo->level() = dom::battery::kDefaultLevel;
}
int charging;
if (GetCurrentBatteryCharging(&charging)) {
aBatteryInfo->charging() = charging;
} else {
aBatteryInfo->charging() = true;
}
if (aBatteryInfo->charging() && (aBatteryInfo->level() < 1.0)) {
aBatteryInfo->remainingTime() = dom::battery::kUnknownRemainingTime;
} else {
aBatteryInfo->remainingTime() = dom::battery::kDefaultRemainingTime;
}
}
namespace {
/**
* RAII class to help us remember to close file descriptors.
*/
const char *wakeLockFilename = "/sys/power/wake_lock";
const char *wakeUnlockFilename = "/sys/power/wake_unlock";
template<ssize_t n>
bool ReadFromFile(const char *filename, char (&buf)[n])
{
int fd = open(filename, O_RDONLY);
ScopedClose autoClose(fd);
if (fd < 0) {
HAL_LOG(("Unable to open file %s.", filename));
return false;
}
ssize_t numRead = read(fd, buf, n);
if (numRead < 0) {
HAL_LOG(("Error reading from file %s.", filename));
return false;
}
buf[std::min(numRead, n - 1)] = '\0';
return true;
}
bool WriteToFile(const char *filename, const char *toWrite)
{
int fd = open(filename, O_WRONLY);
ScopedClose autoClose(fd);
if (fd < 0) {
HAL_LOG(("Unable to open file %s.", filename));
return false;
}
if (write(fd, toWrite, strlen(toWrite)) < 0) {
HAL_LOG(("Unable to write to file %s.", filename));
return false;
}
return true;
}
// We can write to screenEnabledFilename to enable/disable the screen, but when
// we read, we always get "mem"! So we have to keep track ourselves whether
// the screen is on or not.
bool sScreenEnabled = true;
// We can read wakeLockFilename to find out whether the cpu wake lock
// is already acquired, but reading and parsing it is a lot more work
// than tracking it ourselves, and it won't be accurate anyway (kernel
// internal wake locks aren't counted here.)
bool sCpuSleepAllowed = true;
} // anonymous namespace
bool
GetScreenEnabled()
{
return sScreenEnabled;
}
void
SetScreenEnabled(bool enabled)
{
set_screen_state(enabled);
sScreenEnabled = enabled;
}
double
GetScreenBrightness()
{
hal::LightConfiguration aConfig;
hal::LightType light = hal::eHalLightID_Backlight;
hal::GetLight(light, &aConfig);
// backlight is brightness only, so using one of the RGB elements as value.
int brightness = aConfig.color() & 0xFF;
return brightness / 255.0;
}
void
SetScreenBrightness(double brightness)
{
// Don't use De Morgan's law to push the ! into this expression; we want to
// catch NaN too.
if (!(0 <= brightness && brightness <= 1)) {
HAL_LOG(("SetScreenBrightness: Dropping illegal brightness %f.",
brightness));
return;
}
// Convert the value in [0, 1] to an int between 0 and 255 and convert to a color
// note that the high byte is FF, corresponding to the alpha channel.
int val = static_cast<int>(round(brightness * 255));
uint32_t color = (0xff<<24) + (val<<16) + (val<<8) + val;
hal::LightConfiguration aConfig;
aConfig.mode() = hal::eHalLightMode_User;
aConfig.flash() = hal::eHalLightFlash_None;
aConfig.flashOnMS() = aConfig.flashOffMS() = 0;
aConfig.color() = color;
hal::SetLight(hal::eHalLightID_Backlight, aConfig);
hal::SetLight(hal::eHalLightID_Buttons, aConfig);
}
bool
GetCpuSleepAllowed()
{
return sCpuSleepAllowed;
}
void
SetCpuSleepAllowed(bool aAllowed)
{
WriteToFile(aAllowed ? wakeUnlockFilename : wakeLockFilename, "gecko");
sCpuSleepAllowed = aAllowed;
}
static light_device_t* sLights[hal::eHalLightID_Count]; // will be initialized to NULL
light_device_t* GetDevice(hw_module_t* module, char const* name)
{
int err;
hw_device_t* device;
err = module->methods->open(module, name, &device);
if (err == 0) {
return (light_device_t*)device;
} else {
return NULL;
}
}
void
InitLights()
{
// assume that if backlight is NULL, nothing has been set yet
// if this is not true, the initialization will occur everytime a light is read or set!
if (!sLights[hal::eHalLightID_Backlight]) {
int err;
hw_module_t* module;
err = hw_get_module(LIGHTS_HARDWARE_MODULE_ID, (hw_module_t const**)&module);
if (err == 0) {
sLights[hal::eHalLightID_Backlight]
= GetDevice(module, LIGHT_ID_BACKLIGHT);
sLights[hal::eHalLightID_Keyboard]
= GetDevice(module, LIGHT_ID_KEYBOARD);
sLights[hal::eHalLightID_Buttons]
= GetDevice(module, LIGHT_ID_BUTTONS);
sLights[hal::eHalLightID_Battery]
= GetDevice(module, LIGHT_ID_BATTERY);
sLights[hal::eHalLightID_Notifications]
= GetDevice(module, LIGHT_ID_NOTIFICATIONS);
sLights[hal::eHalLightID_Attention]
= GetDevice(module, LIGHT_ID_ATTENTION);
sLights[hal::eHalLightID_Bluetooth]
= GetDevice(module, LIGHT_ID_BLUETOOTH);
sLights[hal::eHalLightID_Wifi]
= GetDevice(module, LIGHT_ID_WIFI);
}
}
}
/**
* The state last set for the lights until liblights supports
* getting the light state.
*/
static light_state_t sStoredLightState[hal::eHalLightID_Count];
bool
SetLight(hal::LightType light, const hal::LightConfiguration& aConfig)
{
light_state_t state;
InitLights();
if (light < 0 || light >= hal::eHalLightID_Count || sLights[light] == NULL) {
return false;
}
memset(&state, 0, sizeof(light_state_t));
state.color = aConfig.color();
state.flashMode = aConfig.flash();
state.flashOnMS = aConfig.flashOnMS();
state.flashOffMS = aConfig.flashOffMS();
state.brightnessMode = aConfig.mode();
sLights[light]->set_light(sLights[light], &state);
sStoredLightState[light] = state;
return true;
}
bool
GetLight(hal::LightType light, hal::LightConfiguration* aConfig)
{
light_state_t state;
#ifdef HAVEGETLIGHT
InitLights();
#endif
if (light < 0 || light >= hal::eHalLightID_Count || sLights[light] == NULL) {
return false;
}
memset(&state, 0, sizeof(light_state_t));
#ifdef HAVEGETLIGHT
sLights[light]->get_light(sLights[light], &state);
#else
state = sStoredLightState[light];
#endif
aConfig->light() = light;
aConfig->color() = state.color;
aConfig->flash() = hal::FlashMode(state.flashMode);
aConfig->flashOnMS() = state.flashOnMS;
aConfig->flashOffMS() = state.flashOffMS;
aConfig->mode() = hal::LightMode(state.brightnessMode);
return true;
}
void
AdjustSystemClock(int64_t aDeltaMilliseconds)
{
int fd;
struct timespec now;
if (aDeltaMilliseconds == 0) {
return;
}
// Preventing context switch before setting system clock
sched_yield();
clock_gettime(CLOCK_REALTIME, &now);
now.tv_sec += (time_t)(aDeltaMilliseconds / 1000LL);
now.tv_nsec += (long)((aDeltaMilliseconds % 1000LL) * NsecPerMsec);
if (now.tv_nsec >= NsecPerSec) {
now.tv_sec += 1;
now.tv_nsec -= NsecPerSec;
}
if (now.tv_nsec < 0) {
now.tv_nsec += NsecPerSec;
now.tv_sec -= 1;
}
do {
fd = open("/dev/alarm", O_RDWR);
} while (fd == -1 && errno == EINTR);
ScopedClose autoClose(fd);
if (fd < 0) {
HAL_LOG(("Failed to open /dev/alarm: %s", strerror(errno)));
return;
}
if (ioctl(fd, ANDROID_ALARM_SET_RTC, &now) < 0) {
HAL_LOG(("ANDROID_ALARM_SET_RTC failed: %s", strerror(errno)));
return;
}
hal::NotifySystemClockChange(aDeltaMilliseconds);
}
static int32_t
GetTimezoneOffset()
{
PRExplodedTime prTime;
PR_ExplodeTime(PR_Now(), PR_LocalTimeParameters, &prTime);
// Daylight saving time (DST) will be taken into account.
int32_t offset = prTime.tm_params.tp_gmt_offset;
offset += prTime.tm_params.tp_dst_offset;
// Returns the timezone offset relative to UTC in minutes.
return -(offset / 60);
}
void
SetTimezone(const nsCString& aTimezoneSpec)
{
if (aTimezoneSpec.Equals(GetTimezone())) {
return;
}
int32_t oldTimezoneOffsetMinutes = GetTimezoneOffset();
property_set("persist.sys.timezone", aTimezoneSpec.get());
// this function is automatically called by the other time conversion
// functions that depend on the timezone. To be safe, we call it manually.
tzset();
int32_t newTimezoneOffsetMinutes = GetTimezoneOffset();
hal::NotifySystemTimezoneChange(
hal::SystemTimezoneChangeInformation(
oldTimezoneOffsetMinutes, newTimezoneOffsetMinutes));
}
nsCString
GetTimezone()
{
char timezone[32];
property_get("persist.sys.timezone", timezone, "");
return nsCString(timezone);
}
void
EnableSystemClockChangeNotifications()
{
}
void
DisableSystemClockChangeNotifications()
{
}
void
EnableSystemTimezoneChangeNotifications()
{
}
void
DisableSystemTimezoneChangeNotifications()
{
}
// Nothing to do here. Gonk widgetry always listens for screen
// orientation changes.
void
EnableScreenConfigurationNotifications()
{
}
void
DisableScreenConfigurationNotifications()
{
}
void
GetCurrentScreenConfiguration(hal::ScreenConfiguration* aScreenConfiguration)
{
*aScreenConfiguration = nsScreenGonk::GetConfiguration();
}
bool
LockScreenOrientation(const dom::ScreenOrientation& aOrientation)
{
return OrientationObserver::GetInstance()->LockScreenOrientation(aOrientation);
}
void
UnlockScreenOrientation()
{
OrientationObserver::GetInstance()->UnlockScreenOrientation();
}
static pthread_t sAlarmFireWatcherThread;
// If |sAlarmData| is non-null, it's owned by the watcher thread.
typedef struct AlarmData {
public:
AlarmData(int aFd) : mFd(aFd), mGeneration(sNextGeneration++), mShuttingDown(false) {}
ScopedClose mFd;
int mGeneration;
bool mShuttingDown;
static int sNextGeneration;
} AlarmData;
int AlarmData::sNextGeneration = 0;
AlarmData* sAlarmData = NULL;
class AlarmFiredEvent : public nsRunnable {
public:
AlarmFiredEvent(int aGeneration) : mGeneration(aGeneration) {}
NS_IMETHOD Run() {
// Guard against spurious notifications caused by an alarm firing
// concurrently with it being disabled.
if (sAlarmData && !sAlarmData->mShuttingDown && mGeneration == sAlarmData->mGeneration) {
hal::NotifyAlarmFired();
}
return NS_OK;
}
private:
int mGeneration;
};
// Runs on alarm-watcher thread.
static void
DestroyAlarmData(void* aData)
{
AlarmData* alarmData = static_cast<AlarmData*>(aData);
delete alarmData;
}
// Runs on alarm-watcher thread.
void ShutDownAlarm(int aSigno)
{
if (aSigno == SIGUSR1) {
sAlarmData->mShuttingDown = true;
}
return;
}
static void*
WaitForAlarm(void* aData)
{
pthread_cleanup_push(DestroyAlarmData, aData);
AlarmData* alarmData = static_cast<AlarmData*>(aData);
while (!alarmData->mShuttingDown) {
int alarmTypeFlags = 0;
// ALARM_WAIT apparently will block even if an alarm hasn't been
// programmed, although this behavior doesn't seem to be
// documented. We rely on that here to avoid spinning the CPU
// while awaiting an alarm to be programmed.
do {
alarmTypeFlags = ioctl(alarmData->mFd, ANDROID_ALARM_WAIT);
} while (alarmTypeFlags < 0 && errno == EINTR && !alarmData->mShuttingDown);
if (!alarmData->mShuttingDown &&
alarmTypeFlags >= 0 && (alarmTypeFlags & ANDROID_ALARM_RTC_WAKEUP_MASK)) {
NS_DispatchToMainThread(new AlarmFiredEvent(alarmData->mGeneration));
}
}
pthread_cleanup_pop(1);
return NULL;
}
bool
EnableAlarm()
{
MOZ_ASSERT(!sAlarmData);
int alarmFd = open("/dev/alarm", O_RDWR);
if (alarmFd < 0) {
HAL_LOG(("Failed to open alarm device: %s.", strerror(errno)));
return false;
}
nsAutoPtr<AlarmData> alarmData(new AlarmData(alarmFd));
struct sigaction actions;
memset(&actions, 0, sizeof(actions));
sigemptyset(&actions.sa_mask);
actions.sa_flags = 0;
actions.sa_handler = ShutDownAlarm;
if (sigaction(SIGUSR1, &actions, NULL)) {
HAL_LOG(("Failed to set SIGUSR1 signal for alarm-watcher thread."));
return false;
}
pthread_attr_t attr;
pthread_attr_init(&attr);
pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_DETACHED);
int status = pthread_create(&sAlarmFireWatcherThread, &attr, WaitForAlarm, alarmData.get());
if (status) {
alarmData = NULL;
HAL_LOG(("Failed to create alarm watcher thread. Status: %d.", status));
return false;
}
pthread_attr_destroy(&attr);
// The thread owns this now. We only hold a pointer.
sAlarmData = alarmData.forget();
return true;
}
void
DisableAlarm()
{
MOZ_ASSERT(sAlarmData);
// NB: this must happen-before the thread cancellation.
sAlarmData = NULL;
// The cancel will interrupt the thread and destroy it, freeing the
// data pointed at by sAlarmData.
DebugOnly<int> err = pthread_kill(sAlarmFireWatcherThread, SIGUSR1);
MOZ_ASSERT(!err);
}
bool
SetAlarm(int32_t aSeconds, int32_t aNanoseconds)
{
if (!sAlarmData) {
HAL_LOG(("We should have enabled the alarm."));
return false;
}
struct timespec ts;
ts.tv_sec = aSeconds;
ts.tv_nsec = aNanoseconds;
// currently we only support RTC wakeup alarm type
const int result = ioctl(sAlarmData->mFd, ANDROID_ALARM_SET(ANDROID_ALARM_RTC_WAKEUP), &ts);
if (result < 0) {
HAL_LOG(("Unable to set alarm: %s.", strerror(errno)));
return false;
}
return true;
}
static int
OomAdjOfOomScoreAdj(int aOomScoreAdj)
{
// Convert OOM adjustment from the domain of /proc/<pid>/oom_score_adj
// to the domain of /proc/<pid>/oom_adj.
int adj;
if (aOomScoreAdj < 0) {
adj = (OOM_DISABLE * aOomScoreAdj) / OOM_SCORE_ADJ_MIN;
} else {
adj = (OOM_ADJUST_MAX * aOomScoreAdj) / OOM_SCORE_ADJ_MAX;
}
return adj;
}
static void
EnsureKernelLowMemKillerParamsSet()
{
static bool kernelLowMemKillerParamsSet;
if (kernelLowMemKillerParamsSet) {
return;
}
kernelLowMemKillerParamsSet = true;
HAL_LOG(("Setting kernel's low-mem killer parameters."));
// Set /sys/module/lowmemorykiller/parameters/{adj,minfree,notify_trigger}
// according to our prefs. These files let us tune when the kernel kills
// processes when we're low on memory, and when it notifies us that we're
// running low on available memory.
//
// adj and minfree are both comma-separated lists of integers. If adj="A,B"
// and minfree="X,Y", then the kernel will kill processes with oom_adj
// A or higher once we have fewer than X pages of memory free, and will kill
// processes with oom_adj B or higher once we have fewer than Y pages of
// memory free.
//
// notify_trigger is a single integer. If we set notify_trigger=Z, then
// we'll get notified when there are fewer than Z pages of memory free. (See
// GonkMemoryPressureMonitoring.cpp.)
// Build the adj and minfree strings.
nsAutoCString adjParams;
nsAutoCString minfreeParams;
const char* priorityClasses[] = {
"master",
"foregroundHigh",
"foreground",
"backgroundPerceivable",
"backgroundHomescreen",
"background"
};
for (size_t i = 0; i < NS_ARRAY_LENGTH(priorityClasses); i++) {
// The system doesn't function correctly if we're missing these prefs, so
// crash loudly.
int32_t oomScoreAdj;
if (!NS_SUCCEEDED(Preferences::GetInt(nsPrintfCString(
"hal.processPriorityManager.gonk.%sOomScoreAdjust",
priorityClasses[i]).get(), &oomScoreAdj))) {
MOZ_CRASH();
}
int32_t killUnderMB;
if (!NS_SUCCEEDED(Preferences::GetInt(nsPrintfCString(
"hal.processPriorityManager.gonk.%sKillUnderMB",
priorityClasses[i]).get(), &killUnderMB))) {
MOZ_CRASH();
}
// adj is in oom_adj units.
adjParams.AppendPrintf("%d,", OomAdjOfOomScoreAdj(oomScoreAdj));
// minfree is in pages.
minfreeParams.AppendPrintf("%d,", killUnderMB * 1024 * 1024 / PAGE_SIZE);
}
// Strip off trailing commas.
adjParams.Cut(adjParams.Length() - 1, 1);
minfreeParams.Cut(minfreeParams.Length() - 1, 1);
if (!adjParams.IsEmpty() && !minfreeParams.IsEmpty()) {
WriteToFile("/sys/module/lowmemorykiller/parameters/adj", adjParams.get());
WriteToFile("/sys/module/lowmemorykiller/parameters/minfree", minfreeParams.get());
}
// Set the low-memory-notification threshold.
int32_t lowMemNotifyThresholdMB;
if (NS_SUCCEEDED(Preferences::GetInt(
"hal.processPriorityManager.gonk.notifyLowMemUnderMB",
&lowMemNotifyThresholdMB))) {
// notify_trigger is in pages.
WriteToFile("/sys/module/lowmemorykiller/parameters/notify_trigger",
nsPrintfCString("%d", lowMemNotifyThresholdMB * 1024 * 1024 / PAGE_SIZE).get());
}
}
void
SetProcessPriority(int aPid, ProcessPriority aPriority)
{
HAL_LOG(("SetProcessPriority(pid=%d, priority=%d)", aPid, aPriority));
// If this is the first time SetProcessPriority was called, set the kernel's
// OOM parameters according to our prefs.
//
// We could/should do this on startup instead of waiting for the first
// SetProcessPriorityCall. But in practice, the master process needs to set
// its priority early in the game, so we can reasonably rely on
// SetProcessPriority being called early in startup.
EnsureKernelLowMemKillerParamsSet();
const char* priorityStr = NULL;
switch (aPriority) {
case PROCESS_PRIORITY_BACKGROUND:
priorityStr = "background";
break;
case PROCESS_PRIORITY_BACKGROUND_HOMESCREEN:
priorityStr = "backgroundHomescreen";
break;
case PROCESS_PRIORITY_BACKGROUND_PERCEIVABLE:
priorityStr = "backgroundPerceivable";
break;
case PROCESS_PRIORITY_FOREGROUND:
priorityStr = "foreground";
break;
case PROCESS_PRIORITY_FOREGROUND_HIGH:
priorityStr = "foregroundHigh";
break;
case PROCESS_PRIORITY_MASTER:
priorityStr = "master";
break;
default:
// PROCESS_PRIORITY_UNKNOWN ends up in this branch, along with invalid enum
// values.
NS_ERROR("Invalid process priority!");
return;
}
// Notice that you can disable oom_adj and renice by deleting the prefs
// hal.processPriorityManager{foreground,background,master}{OomAdjust,Nice}.
int32_t oomScoreAdj = 0;
nsresult rv = Preferences::GetInt(nsPrintfCString(
"hal.processPriorityManager.gonk.%sOomScoreAdjust",
priorityStr).get(), &oomScoreAdj);
if (NS_SUCCEEDED(rv)) {
int clampedOomScoreAdj = clamped<int>(oomScoreAdj, OOM_SCORE_ADJ_MIN,
OOM_SCORE_ADJ_MAX);
if(clampedOomScoreAdj != oomScoreAdj) {
HAL_LOG(("Clamping OOM adjustment for pid %d to %d",
aPid, clampedOomScoreAdj));
} else {
HAL_LOG(("Setting OOM adjustment for pid %d to %d",
aPid, clampedOomScoreAdj));
}
// We try the newer interface first, and fall back to the older interface
// on failure.
if (!WriteToFile(nsPrintfCString("/proc/%d/oom_score_adj", aPid).get(),
nsPrintfCString("%d", clampedOomScoreAdj).get()))
{
int oomAdj = OomAdjOfOomScoreAdj(clampedOomScoreAdj);
WriteToFile(nsPrintfCString("/proc/%d/oom_adj", aPid).get(),
nsPrintfCString("%d", oomAdj).get());
}
}
int32_t nice = 0;
rv = Preferences::GetInt(nsPrintfCString(
"hal.processPriorityManager.gonk.%sNice", priorityStr).get(), &nice);
if (NS_SUCCEEDED(rv)) {
HAL_LOG(("Setting nice for pid %d to %d", aPid, nice));
int success = setpriority(PRIO_PROCESS, aPid, nice);
if (success != 0) {
HAL_LOG(("Failed to set nice for pid %d to %d", aPid, nice));
}
}
}
void
FactoryReset()
{
nsCOMPtr<nsIRecoveryService> recoveryService =
do_GetService("@mozilla.org/recovery-service;1");
if (!recoveryService) {
NS_WARNING("Could not get recovery service!");
return;
}
recoveryService->FactoryReset();
}
} // hal_impl
} // mozilla