gecko/security/nss/lib/pk11wrap/pk11pub.h

822 lines
39 KiB
C

/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Netscape security libraries.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1994-2000
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Douglas Stebila <douglas@stebila.ca>, Sun Microsystems Laboratories
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#ifndef _PK11PUB_H_
#define _PK11PUB_H_
#include "plarena.h"
#include "seccomon.h"
#include "secoidt.h"
#include "secdert.h"
#include "keyt.h"
#include "certt.h"
#include "pkcs11t.h"
#include "secmodt.h"
#include "seccomon.h"
#include "pkcs7t.h"
#include "cmsreclist.h"
/*
* Exported PK11 wrap functions.
*/
SEC_BEGIN_PROTOS
/************************************************************
* Generic Slot Lists Management
************************************************************/
void PK11_FreeSlotList(PK11SlotList *list);
SECStatus PK11_FreeSlotListElement(PK11SlotList *list, PK11SlotListElement *le);
PK11SlotListElement * PK11_GetFirstSafe(PK11SlotList *list);
PK11SlotListElement *PK11_GetNextSafe(PK11SlotList *list,
PK11SlotListElement *le, PRBool restart);
/************************************************************
* Generic Slot Management
************************************************************/
PK11SlotInfo *PK11_ReferenceSlot(PK11SlotInfo *slot);
void PK11_FreeSlot(PK11SlotInfo *slot);
SECStatus PK11_DestroyObject(PK11SlotInfo *slot,CK_OBJECT_HANDLE object);
SECStatus PK11_DestroyTokenObject(PK11SlotInfo *slot,CK_OBJECT_HANDLE object);
PK11SlotInfo *PK11_GetInternalKeySlot(void);
PK11SlotInfo *PK11_GetInternalSlot(void);
SECStatus PK11_Logout(PK11SlotInfo *slot);
void PK11_LogoutAll(void);
/************************************************************
* Slot Password Management
************************************************************/
void PK11_SetSlotPWValues(PK11SlotInfo *slot,int askpw, int timeout);
void PK11_GetSlotPWValues(PK11SlotInfo *slot,int *askpw, int *timeout);
SECStatus PK11_CheckSSOPassword(PK11SlotInfo *slot, char *ssopw);
SECStatus PK11_CheckUserPassword(PK11SlotInfo *slot, const char *pw);
PRBool PK11_IsLoggedIn(PK11SlotInfo *slot, void *wincx);
SECStatus PK11_InitPin(PK11SlotInfo *slot,const char *ssopw,
const char *pk11_userpwd);
SECStatus PK11_ChangePW(PK11SlotInfo *slot, const char *oldpw,
const char *newpw);
void PK11_SetPasswordFunc(PK11PasswordFunc func);
int PK11_GetMinimumPwdLength(PK11SlotInfo *slot);
SECStatus PK11_ResetToken(PK11SlotInfo *slot, char *sso_pwd);
SECStatus PK11_Authenticate(PK11SlotInfo *slot, PRBool loadCerts, void *wincx);
SECStatus PK11_TokenRefresh(PK11SlotInfo *slot);
/******************************************************************
* Slot info functions
******************************************************************/
PK11SlotInfo *PK11_FindSlotByName(const char *name);
/******************************************************************
* PK11_FindSlotsByNames searches for a PK11SlotInfo using one or
* more criteria : dllName, slotName and tokenName . In addition, if
* presentOnly is set , only slots with a token inserted will be
* returned.
******************************************************************/
PK11SlotList *PK11_FindSlotsByNames(const char *dllName,
const char* slotName, const char* tokenName, PRBool presentOnly);
PRBool PK11_IsReadOnly(PK11SlotInfo *slot);
PRBool PK11_IsInternal(PK11SlotInfo *slot);
PRBool PK11_IsInternalKeySlot(PK11SlotInfo *slot);
char * PK11_GetTokenName(PK11SlotInfo *slot);
char * PK11_GetSlotName(PK11SlotInfo *slot);
PRBool PK11_NeedLogin(PK11SlotInfo *slot);
PRBool PK11_IsFriendly(PK11SlotInfo *slot);
PRBool PK11_IsHW(PK11SlotInfo *slot);
PRBool PK11_IsRemovable(PK11SlotInfo *slot);
PRBool PK11_NeedUserInit(PK11SlotInfo *slot);
PRBool PK11_ProtectedAuthenticationPath(PK11SlotInfo *slot);
int PK11_GetSlotSeries(PK11SlotInfo *slot);
int PK11_GetCurrentWrapIndex(PK11SlotInfo *slot);
unsigned long PK11_GetDefaultFlags(PK11SlotInfo *slot);
CK_SLOT_ID PK11_GetSlotID(PK11SlotInfo *slot);
SECMODModuleID PK11_GetModuleID(PK11SlotInfo *slot);
SECStatus PK11_GetSlotInfo(PK11SlotInfo *slot, CK_SLOT_INFO *info);
SECStatus PK11_GetTokenInfo(PK11SlotInfo *slot, CK_TOKEN_INFO *info);
PRBool PK11_IsDisabled(PK11SlotInfo *slot);
PRBool PK11_HasRootCerts(PK11SlotInfo *slot);
PK11DisableReasons PK11_GetDisabledReason(PK11SlotInfo *slot);
/* Prevents the slot from being used, and set disable reason to user-disable */
/* NOTE: Mechanisms that were ON continue to stay ON */
/* Therefore, when the slot is enabled, it will remember */
/* what mechanisms needs to be turned on */
PRBool PK11_UserDisableSlot(PK11SlotInfo *slot);
/* Allow all mechanisms that are ON before UserDisableSlot() */
/* was called to be available again */
PRBool PK11_UserEnableSlot(PK11SlotInfo *slot);
/*
* wait for a specific slot event.
* event is a specific event to wait for. Currently only
* PK11TokenChangeOrRemovalEvent and PK11TokenPresentEvents are defined.
* timeout can be an interval time to wait, PR_INTERVAL_NO_WAIT (meaning only
* poll once), or PR_INTERVAL_NO_TIMEOUT (meaning block until a change).
* pollInterval is a suggested pulling interval value. '0' means use the
* default. Future implementations that don't poll may ignore this value.
* series is the current series for the last slot. This should be the series
* value for the slot the last time you read persistant information from the
* slot. For instance, if you publish a cert from the slot, you should obtain
* the slot series at that time. Then PK11_WaitForTokenEvent can detect a
* a change in the slot between the time you publish and the time
* PK11_WaitForTokenEvent is called, elliminating potential race conditions.
*
* The current status that is returned is:
* PK11TokenNotRemovable - always returned for any non-removable token.
* PK11TokenPresent - returned when the token is present and we are waiting
* on a PK11TokenPresentEvent. Then next event to look for is a
* PK11TokenChangeOrRemovalEvent.
* PK11TokenChanged - returned when the old token has been removed and a new
* token ad been inserted, and we are waiting for a
* PK11TokenChangeOrRemovalEvent. The next event to look for is another
* PK11TokenChangeOrRemovalEvent.
* PK11TokenRemoved - returned when the token is not present and we are
* waiting for a PK11TokenChangeOrRemovalEvent. The next event to look for
* is a PK11TokenPresentEvent.
*/
PK11TokenStatus PK11_WaitForTokenEvent(PK11SlotInfo *slot, PK11TokenEvent event,
PRIntervalTime timeout, PRIntervalTime pollInterval, int series);
PRBool PK11_NeedPWInit(void);
PRBool PK11_TokenExists(CK_MECHANISM_TYPE);
SECStatus PK11_GetModInfo(SECMODModule *mod, CK_INFO *info);
PRBool PK11_IsFIPS(void);
SECMODModule *PK11_GetModule(PK11SlotInfo *slot);
/*********************************************************************
* Slot mapping utility functions.
*********************************************************************/
PRBool PK11_IsPresent(PK11SlotInfo *slot);
PRBool PK11_DoesMechanism(PK11SlotInfo *slot, CK_MECHANISM_TYPE type);
PK11SlotList * PK11_GetAllTokens(CK_MECHANISM_TYPE type,PRBool needRW,
PRBool loadCerts, void *wincx);
PK11SlotInfo *PK11_GetBestSlotMultiple(CK_MECHANISM_TYPE *type, int count,
void *wincx);
PK11SlotInfo *PK11_GetBestSlot(CK_MECHANISM_TYPE type, void *wincx);
CK_MECHANISM_TYPE PK11_GetBestWrapMechanism(PK11SlotInfo *slot);
int PK11_GetBestKeyLength(PK11SlotInfo *slot, CK_MECHANISM_TYPE type);
/*
* Open a new database using the softoken. The caller is responsible for making
* sure the module spec is correct and usable. The caller should ask for one
* new database per call if the caller wants to get meaningful information
* about the new database.
*
* moduleSpec is the same data that you would pass to softoken at
* initialization time under the 'tokens' options. For example, if you were
* to specify tokens=<0x4=[configdir='./mybackup' tokenDescription='Backup']>
* You would specify "configdir='./mybackup' tokenDescription='Backup'" as your
* module spec here. The slot ID will be calculated for you by
* SECMOD_OpenUserDB().
*
* Typical parameters here are configdir, tokenDescription and flags.
*
* a Full list is below:
*
*
* configDir - The location of the databases for this token. If configDir is
* not specified, and noCertDB and noKeyDB is not specified, the load
* will fail.
* certPrefix - Cert prefix for this token.
* keyPrefix - Prefix for the key database for this token. (if not specified,
* certPrefix will be used).
* tokenDescription - The label value for this token returned in the
* CK_TOKEN_INFO structure with an internationalize string (UTF8).
* This value will be truncated at 32 bytes (no NULL, partial UTF8
* characters dropped). You should specify a user friendly name here
* as this is the value the token will be refered to in most
* application UI's. You should make sure tokenDescription is unique.
* slotDescription - The slotDescription value for this token returned
* in the CK_SLOT_INFO structure with an internationalize string
* (UTF8). This value will be truncated at 64 bytes (no NULL, partial
* UTF8 characters dropped). This name will not change after the
* database is closed. It should have some number to make this unique.
* minPWLen - minimum password length for this token.
* flags - comma separated list of flag values, parsed case-insensitive.
* Valid flags are:
* readOnly - Databases should be opened read only.
* noCertDB - Don't try to open a certificate database.
* noKeyDB - Don't try to open a key database.
* forceOpen - Don't fail to initialize the token if the
* databases could not be opened.
* passwordRequired - zero length passwords are not acceptable
* (valid only if there is a keyDB).
* optimizeSpace - allocate smaller hash tables and lock tables.
* When this flag is not specified, Softoken will allocate
* large tables to prevent lock contention.
*/
PK11SlotInfo *SECMOD_OpenUserDB(const char *moduleSpec);
SECStatus SECMOD_CloseUserDB(PK11SlotInfo *slot);
/*
* This is exactly the same as OpenUserDB except it can be called on any
* module that understands softoken style new slot entries. The resulting
* slot can be closed using SECMOD_CloseUserDB above. Value of moduleSpec
* is token specific.
*/
PK11SlotInfo *SECMOD_OpenNewSlot(SECMODModule *mod, const char *moduleSpec);
/*
* merge the permanent objects from on token to another
*/
SECStatus PK11_MergeTokens(PK11SlotInfo *targetSlot, PK11SlotInfo *sourceSlot,
PK11MergeLog *log, void *targetPwArg, void *sourcePwArg);
/*
* create and destroy merge logs needed by PK11_MergeTokens
*/
PK11MergeLog * PK11_CreateMergeLog(void);
void PK11_DestroyMergeLog(PK11MergeLog *log);
/*********************************************************************
* Mechanism Mapping functions
*********************************************************************/
CK_MECHANISM_TYPE PK11_GetKeyType(CK_MECHANISM_TYPE type,unsigned long len);
CK_MECHANISM_TYPE PK11_GetKeyGen(CK_MECHANISM_TYPE type);
int PK11_GetBlockSize(CK_MECHANISM_TYPE type,SECItem *params);
int PK11_GetIVLength(CK_MECHANISM_TYPE type);
SECItem *PK11_ParamFromIV(CK_MECHANISM_TYPE type,SECItem *iv);
unsigned char *PK11_IVFromParam(CK_MECHANISM_TYPE type,SECItem *param,int *len);
SECItem * PK11_BlockData(SECItem *data,unsigned long size);
/* PKCS #11 to DER mapping functions */
SECItem *PK11_ParamFromAlgid(SECAlgorithmID *algid);
SECItem *PK11_GenerateNewParam(CK_MECHANISM_TYPE, PK11SymKey *);
CK_MECHANISM_TYPE PK11_AlgtagToMechanism(SECOidTag algTag);
SECOidTag PK11_MechanismToAlgtag(CK_MECHANISM_TYPE type);
SECOidTag PK11_FortezzaMapSig(SECOidTag algTag);
SECStatus PK11_ParamToAlgid(SECOidTag algtag, SECItem *param,
PLArenaPool *arena, SECAlgorithmID *algid);
SECStatus PK11_SeedRandom(PK11SlotInfo *,unsigned char *data,int len);
SECStatus PK11_GenerateRandomOnSlot(PK11SlotInfo *,unsigned char *data,int len);
SECStatus PK11_RandomUpdate(void *data, size_t bytes);
SECStatus PK11_GenerateRandom(unsigned char *data,int len);
/* warning: cannot work with pkcs 5 v2
* use algorithm ID s instead of pkcs #11 mechanism pointers */
CK_RV PK11_MapPBEMechanismToCryptoMechanism(CK_MECHANISM_PTR pPBEMechanism,
CK_MECHANISM_PTR pCryptoMechanism,
SECItem *pbe_pwd, PRBool bad3DES);
CK_MECHANISM_TYPE PK11_GetPadMechanism(CK_MECHANISM_TYPE);
CK_MECHANISM_TYPE PK11_MapSignKeyType(KeyType keyType);
/**********************************************************************
* Symetric, Public, and Private Keys
**********************************************************************/
void PK11_FreeSymKey(PK11SymKey *key);
PK11SymKey *PK11_ReferenceSymKey(PK11SymKey *symKey);
PK11SymKey *PK11_ImportSymKey(PK11SlotInfo *slot, CK_MECHANISM_TYPE type,
PK11Origin origin, CK_ATTRIBUTE_TYPE operation, SECItem *key, void *wincx);
PK11SymKey *PK11_ImportSymKeyWithFlags(PK11SlotInfo *slot,
CK_MECHANISM_TYPE type, PK11Origin origin, CK_ATTRIBUTE_TYPE operation,
SECItem *key, CK_FLAGS flags, PRBool isPerm, void *wincx);
PK11SymKey *PK11_SymKeyFromHandle(PK11SlotInfo *slot, PK11SymKey *parent,
PK11Origin origin, CK_MECHANISM_TYPE type, CK_OBJECT_HANDLE keyID,
PRBool owner, void *wincx);
PK11SymKey *PK11_GetWrapKey(PK11SlotInfo *slot, int wrap,
CK_MECHANISM_TYPE type,int series, void *wincx);
/*
* This function is not thread-safe. It can only be called when only
* one thread has a reference to wrapKey.
*/
void PK11_SetWrapKey(PK11SlotInfo *slot, int wrap, PK11SymKey *wrapKey);
CK_MECHANISM_TYPE PK11_GetMechanism(PK11SymKey *symKey);
/*
* import a public key into the desired slot
*
* This function takes a public key structure and creates a public key in a
* given slot. If isToken is set, then a persistant public key is created.
*
* Note: it is possible for this function to return a handle for a key which
* is persistant, even if isToken is not set.
*/
CK_OBJECT_HANDLE PK11_ImportPublicKey(PK11SlotInfo *slot,
SECKEYPublicKey *pubKey, PRBool isToken);
PK11SymKey *PK11_KeyGen(PK11SlotInfo *slot,CK_MECHANISM_TYPE type,
SECItem *param, int keySize,void *wincx);
PK11SymKey *PK11_TokenKeyGen(PK11SlotInfo *slot, CK_MECHANISM_TYPE type,
SECItem *param, int keySize, SECItem *keyid,
PRBool isToken, void *wincx);
PK11SymKey *PK11_TokenKeyGenWithFlags(PK11SlotInfo *slot,
CK_MECHANISM_TYPE type, SECItem *param,
int keySize, SECItem *keyid, CK_FLAGS opFlags,
PK11AttrFlags attrFlags, void *wincx);
PK11SymKey * PK11_ListFixedKeysInSlot(PK11SlotInfo *slot, char *nickname,
void *wincx);
PK11SymKey *PK11_GetNextSymKey(PK11SymKey *symKey);
CK_KEY_TYPE PK11_GetSymKeyType(PK11SymKey *key);
CK_OBJECT_HANDLE PK11_GetSymKeyHandle(PK11SymKey *symKey);
/*
* PK11_SetSymKeyUserData
* sets generic user data on keys (usually a pointer to a data structure)
* that can later be retrieved by PK11_GetSymKeyUserData().
* symKey - key where data will be set.
* data - data to be set.
* freefunc - function used to free the data.
* Setting user data on symKeys with existing user data already set will cause
* the existing user data to be freed before the new user data is set.
* Freeing user data is done by calling the user specified freefunc.
* If freefunc is NULL, the user data is assumed to be global or static an
* not freed. Passing NULL for user data to PK11_SetSymKeyUserData has the
* effect of freeing any existing user data, and clearing the user data
* pointer. If user data exists when the symKey is finally freed, that
* data will be freed with freefunc.
*
* Applications should only use this function on keys which the application
* has created directly, as there is only one user data value per key.
*/
void PK11_SetSymKeyUserData(PK11SymKey *symKey, void *data,
PK11FreeDataFunc freefunc);
/* PK11_GetSymKeyUserData
* retrieves generic user data which was set on a key by
* PK11_SetSymKeyUserData.
* symKey - key with data to be fetched
*
* If no data exists, or the data has been cleared, PK11_GetSymKeyUserData
* will return NULL. Returned data is still owned and managed by the SymKey,
* the caller should not free the data.
*
*/
void *PK11_GetSymKeyUserData(PK11SymKey *symKey);
SECStatus PK11_PubWrapSymKey(CK_MECHANISM_TYPE type, SECKEYPublicKey *pubKey,
PK11SymKey *symKey, SECItem *wrappedKey);
SECStatus PK11_WrapSymKey(CK_MECHANISM_TYPE type, SECItem *params,
PK11SymKey *wrappingKey, PK11SymKey *symKey, SECItem *wrappedKey);
/* move a key to 'slot' optionally set the key attributes according to either
* operation or the flags and making the key permanent at the same time.
* If the key is moved to the same slot, operation and flags values are
* currently ignored */
PK11SymKey *PK11_MoveSymKey(PK11SlotInfo *slot, CK_ATTRIBUTE_TYPE operation,
CK_FLAGS flags, PRBool perm, PK11SymKey *symKey);
/*
* derive a new key from the base key.
* PK11_Derive returns a key which can do exactly one operation, and is
* ephemeral (session key).
* PK11_DeriveWithFlags is the same as PK11_Derive, except you can use
* CKF_ flags to enable more than one operation.
* PK11_DeriveWithFlagsPerm is the same as PK11_DeriveWithFlags except you can
* (optionally) make the key permanent (token key).
*/
PK11SymKey *PK11_Derive(PK11SymKey *baseKey, CK_MECHANISM_TYPE mechanism,
SECItem *param, CK_MECHANISM_TYPE target,
CK_ATTRIBUTE_TYPE operation, int keySize);
PK11SymKey *PK11_DeriveWithFlags( PK11SymKey *baseKey,
CK_MECHANISM_TYPE derive, SECItem *param, CK_MECHANISM_TYPE target,
CK_ATTRIBUTE_TYPE operation, int keySize, CK_FLAGS flags);
PK11SymKey * PK11_DeriveWithFlagsPerm( PK11SymKey *baseKey,
CK_MECHANISM_TYPE derive,
SECItem *param, CK_MECHANISM_TYPE target, CK_ATTRIBUTE_TYPE operation,
int keySize, CK_FLAGS flags, PRBool isPerm);
PK11SymKey *PK11_PubDerive( SECKEYPrivateKey *privKey,
SECKEYPublicKey *pubKey, PRBool isSender, SECItem *randomA, SECItem *randomB,
CK_MECHANISM_TYPE derive, CK_MECHANISM_TYPE target,
CK_ATTRIBUTE_TYPE operation, int keySize,void *wincx) ;
PK11SymKey *PK11_PubDeriveWithKDF( SECKEYPrivateKey *privKey,
SECKEYPublicKey *pubKey, PRBool isSender, SECItem *randomA, SECItem *randomB,
CK_MECHANISM_TYPE derive, CK_MECHANISM_TYPE target,
CK_ATTRIBUTE_TYPE operation, int keySize,
CK_ULONG kdf, SECItem *sharedData, void *wincx);
/*
* unwrap a new key with a symetric key.
* PK11_Unwrap returns a key which can do exactly one operation, and is
* ephemeral (session key).
* PK11_UnwrapWithFlags is the same as PK11_Unwrap, except you can use
* CKF_ flags to enable more than one operation.
* PK11_UnwrapWithFlagsPerm is the same as PK11_UnwrapWithFlags except you can
* (optionally) make the key permanent (token key).
*/
PK11SymKey *PK11_UnwrapSymKey(PK11SymKey *key,
CK_MECHANISM_TYPE wraptype, SECItem *param, SECItem *wrapppedKey,
CK_MECHANISM_TYPE target, CK_ATTRIBUTE_TYPE operation, int keySize);
PK11SymKey *PK11_UnwrapSymKeyWithFlags(PK11SymKey *wrappingKey,
CK_MECHANISM_TYPE wrapType, SECItem *param, SECItem *wrappedKey,
CK_MECHANISM_TYPE target, CK_ATTRIBUTE_TYPE operation, int keySize,
CK_FLAGS flags);
PK11SymKey * PK11_UnwrapSymKeyWithFlagsPerm(PK11SymKey *wrappingKey,
CK_MECHANISM_TYPE wrapType,
SECItem *param, SECItem *wrappedKey,
CK_MECHANISM_TYPE target, CK_ATTRIBUTE_TYPE operation,
int keySize, CK_FLAGS flags, PRBool isPerm);
/*
* unwrap a new key with a private key.
* PK11_PubUnwrap returns a key which can do exactly one operation, and is
* ephemeral (session key).
* PK11_PubUnwrapWithFlagsPerm is the same as PK11_PubUnwrap except you can
* use * CKF_ flags to enable more than one operation, and optionally make
* the key permanent (token key).
*/
PK11SymKey *PK11_PubUnwrapSymKey(SECKEYPrivateKey *key, SECItem *wrapppedKey,
CK_MECHANISM_TYPE target, CK_ATTRIBUTE_TYPE operation, int keySize);
PK11SymKey * PK11_PubUnwrapSymKeyWithFlagsPerm(SECKEYPrivateKey *wrappingKey,
SECItem *wrappedKey, CK_MECHANISM_TYPE target,
CK_ATTRIBUTE_TYPE operation, int keySize,
CK_FLAGS flags, PRBool isPerm);
PK11SymKey *PK11_FindFixedKey(PK11SlotInfo *slot, CK_MECHANISM_TYPE type,
SECItem *keyID, void *wincx);
SECStatus PK11_DeleteTokenPrivateKey(SECKEYPrivateKey *privKey,PRBool force);
SECStatus PK11_DeleteTokenPublicKey(SECKEYPublicKey *pubKey);
SECStatus PK11_DeleteTokenSymKey(PK11SymKey *symKey);
SECStatus PK11_DeleteTokenCertAndKey(CERTCertificate *cert,void *wincx);
SECKEYPrivateKey * PK11_LoadPrivKey(PK11SlotInfo *slot,
SECKEYPrivateKey *privKey, SECKEYPublicKey *pubKey,
PRBool token, PRBool sensitive);
char * PK11_GetSymKeyNickname(PK11SymKey *symKey);
char * PK11_GetPrivateKeyNickname(SECKEYPrivateKey *privKey);
char * PK11_GetPublicKeyNickname(SECKEYPublicKey *pubKey);
SECStatus PK11_SetSymKeyNickname(PK11SymKey *symKey, const char *nickname);
SECStatus PK11_SetPrivateKeyNickname(SECKEYPrivateKey *privKey,
const char *nickname);
SECStatus PK11_SetPublicKeyNickname(SECKEYPublicKey *pubKey,
const char *nickname);
/* size to hold key in bytes */
unsigned int PK11_GetKeyLength(PK11SymKey *key);
/* size of actual secret parts of key in bits */
/* algid is because RC4 strength is determined by the effective bits as well
* as the key bits */
unsigned int PK11_GetKeyStrength(PK11SymKey *key,SECAlgorithmID *algid);
SECStatus PK11_ExtractKeyValue(PK11SymKey *symKey);
SECItem * PK11_GetKeyData(PK11SymKey *symKey);
PK11SlotInfo * PK11_GetSlotFromKey(PK11SymKey *symKey);
void *PK11_GetWindow(PK11SymKey *symKey);
/*
* Explicitly set the key usage for the generated private key.
*
* This allows us to specify single use EC and RSA keys whose usage
* can be regulated by the underlying token.
*
* The underlying key usage is set using opFlags. opFlagsMask specifies
* which operations are specified by opFlags. For instance to turn encrypt
* on and signing off, opFlags would be CKF_ENCRYPT|CKF_DECRYPT and
* opFlagsMask would be CKF_ENCRYPT|CKF_DECRYPT|CKF_SIGN|CKF_VERIFY. You
* need to specify both the public and private key flags,
* PK11_GenerateKeyPairWithOpFlags will sort out the correct flag to the
* correct key type. Flags not specified in opFlagMask will be defaulted
* according to mechanism type and token capabilities.
*/
SECKEYPrivateKey *PK11_GenerateKeyPairWithOpFlags(PK11SlotInfo *slot,
CK_MECHANISM_TYPE type, void *param, SECKEYPublicKey **pubk,
PK11AttrFlags attrFlags, CK_FLAGS opFlags, CK_FLAGS opFlagsMask,
void *wincx);
/*
* The attrFlags is the logical OR of the PK11_ATTR_XXX bitflags.
* These flags apply to the private key. The PK11_ATTR_TOKEN,
* PK11_ATTR_SESSION, PK11_ATTR_MODIFIABLE, and PK11_ATTR_UNMODIFIABLE
* flags also apply to the public key.
*/
SECKEYPrivateKey *PK11_GenerateKeyPairWithFlags(PK11SlotInfo *slot,
CK_MECHANISM_TYPE type, void *param, SECKEYPublicKey **pubk,
PK11AttrFlags attrFlags, void *wincx);
SECKEYPrivateKey *PK11_GenerateKeyPair(PK11SlotInfo *slot,
CK_MECHANISM_TYPE type, void *param, SECKEYPublicKey **pubk,
PRBool isPerm, PRBool isSensitive, void *wincx);
SECKEYPrivateKey * PK11_FindPrivateKeyFromCert(PK11SlotInfo *slot,
CERTCertificate *cert, void *wincx);
SECKEYPrivateKey * PK11_FindKeyByAnyCert(CERTCertificate *cert, void *wincx);
SECKEYPrivateKey * PK11_FindKeyByKeyID(PK11SlotInfo *slot, SECItem *keyID,
void *wincx);
int PK11_GetPrivateModulusLen(SECKEYPrivateKey *key);
/* note: despite the name, this function takes a private key. */
SECStatus PK11_PubDecryptRaw(SECKEYPrivateKey *key, unsigned char *data,
unsigned *outLen, unsigned int maxLen, unsigned char *enc, unsigned encLen);
#define PK11_PrivDecryptRaw PK11_PubDecryptRaw
/* The encrypt function that complements the above decrypt function. */
SECStatus PK11_PubEncryptRaw(SECKEYPublicKey *key, unsigned char *enc,
unsigned char *data, unsigned dataLen, void *wincx);
SECStatus PK11_PrivDecryptPKCS1(SECKEYPrivateKey *key, unsigned char *data,
unsigned *outLen, unsigned int maxLen, unsigned char *enc, unsigned encLen);
/* The encrypt function that complements the above decrypt function. */
SECStatus PK11_PubEncryptPKCS1(SECKEYPublicKey *key, unsigned char *enc,
unsigned char *data, unsigned dataLen, void *wincx);
SECStatus PK11_ImportPrivateKeyInfo(PK11SlotInfo *slot,
SECKEYPrivateKeyInfo *pki, SECItem *nickname,
SECItem *publicValue, PRBool isPerm, PRBool isPrivate,
unsigned int usage, void *wincx);
SECStatus PK11_ImportPrivateKeyInfoAndReturnKey(PK11SlotInfo *slot,
SECKEYPrivateKeyInfo *pki, SECItem *nickname,
SECItem *publicValue, PRBool isPerm, PRBool isPrivate,
unsigned int usage, SECKEYPrivateKey** privk, void *wincx);
SECStatus PK11_ImportDERPrivateKeyInfo(PK11SlotInfo *slot,
SECItem *derPKI, SECItem *nickname,
SECItem *publicValue, PRBool isPerm, PRBool isPrivate,
unsigned int usage, void *wincx);
SECStatus PK11_ImportDERPrivateKeyInfoAndReturnKey(PK11SlotInfo *slot,
SECItem *derPKI, SECItem *nickname,
SECItem *publicValue, PRBool isPerm, PRBool isPrivate,
unsigned int usage, SECKEYPrivateKey** privk, void *wincx);
SECStatus PK11_ImportEncryptedPrivateKeyInfo(PK11SlotInfo *slot,
SECKEYEncryptedPrivateKeyInfo *epki, SECItem *pwitem,
SECItem *nickname, SECItem *publicValue, PRBool isPerm,
PRBool isPrivate, KeyType type,
unsigned int usage, void *wincx);
SECKEYPrivateKeyInfo *PK11_ExportPrivateKeyInfo(
CERTCertificate *cert, void *wincx);
SECKEYEncryptedPrivateKeyInfo *PK11_ExportEncryptedPrivKeyInfo(
PK11SlotInfo *slot, SECOidTag algTag, SECItem *pwitem,
SECKEYPrivateKey *pk, int iteration, void *wincx);
SECKEYEncryptedPrivateKeyInfo *PK11_ExportEncryptedPrivateKeyInfo(
PK11SlotInfo *slot, SECOidTag algTag, SECItem *pwitem,
CERTCertificate *cert, int iteration, void *wincx);
SECKEYPrivateKey *PK11_FindKeyByDERCert(PK11SlotInfo *slot,
CERTCertificate *cert, void *wincx);
SECKEYPublicKey *PK11_MakeKEAPubKey(unsigned char *data, int length);
SECStatus PK11_DigestKey(PK11Context *context, PK11SymKey *key);
PRBool PK11_VerifyKeyOK(PK11SymKey *key);
SECKEYPrivateKey *PK11_UnwrapPrivKey(PK11SlotInfo *slot,
PK11SymKey *wrappingKey, CK_MECHANISM_TYPE wrapType,
SECItem *param, SECItem *wrappedKey, SECItem *label,
SECItem *publicValue, PRBool token, PRBool sensitive,
CK_KEY_TYPE keyType, CK_ATTRIBUTE_TYPE *usage, int usageCount,
void *wincx);
SECStatus PK11_WrapPrivKey(PK11SlotInfo *slot, PK11SymKey *wrappingKey,
SECKEYPrivateKey *privKey, CK_MECHANISM_TYPE wrapType,
SECItem *param, SECItem *wrappedKey, void *wincx);
SECItem* PK11_DEREncodePublicKey(SECKEYPublicKey *pubk);
PK11SymKey* PK11_CopySymKeyForSigning(PK11SymKey *originalKey,
CK_MECHANISM_TYPE mech);
SECKEYPrivateKeyList* PK11_ListPrivKeysInSlot(PK11SlotInfo *slot,
char *nickname, void *wincx);
SECKEYPublicKeyList* PK11_ListPublicKeysInSlot(PK11SlotInfo *slot,
char *nickname);
SECKEYPQGParams *PK11_GetPQGParamsFromPrivateKey(SECKEYPrivateKey *privKey);
/* deprecated */
SECKEYPrivateKeyList* PK11_ListPrivateKeysInSlot(PK11SlotInfo *slot);
PK11SymKey *PK11_ConvertSessionSymKeyToTokenSymKey(PK11SymKey *symk,
void *wincx);
SECKEYPrivateKey *PK11_ConvertSessionPrivKeyToTokenPrivKey(
SECKEYPrivateKey *privk, void* wincx);
SECKEYPrivateKey * PK11_CopyTokenPrivKeyToSessionPrivKey(PK11SlotInfo *destSlot,
SECKEYPrivateKey *privKey);
/**********************************************************************
* Certs
**********************************************************************/
SECItem *PK11_MakeIDFromPubKey(SECItem *pubKeyData);
SECStatus PK11_TraverseSlotCerts(
SECStatus(* callback)(CERTCertificate*,SECItem *,void *),
void *arg, void *wincx);
CERTCertificate * PK11_FindCertFromNickname(const char *nickname, void *wincx);
CERTCertList * PK11_FindCertsFromNickname(const char *nickname, void *wincx);
CERTCertificate *PK11_GetCertFromPrivateKey(SECKEYPrivateKey *privKey);
SECStatus PK11_ImportCert(PK11SlotInfo *slot, CERTCertificate *cert,
CK_OBJECT_HANDLE key, const char *nickname,
PRBool includeTrust);
SECStatus PK11_ImportDERCert(PK11SlotInfo *slot, SECItem *derCert,
CK_OBJECT_HANDLE key, char *nickname, PRBool includeTrust);
PK11SlotInfo *PK11_ImportCertForKey(CERTCertificate *cert,
const char *nickname, void *wincx);
PK11SlotInfo *PK11_ImportDERCertForKey(SECItem *derCert, char *nickname,
void *wincx);
PK11SlotInfo *PK11_KeyForCertExists(CERTCertificate *cert,
CK_OBJECT_HANDLE *keyPtr, void *wincx);
PK11SlotInfo *PK11_KeyForDERCertExists(SECItem *derCert,
CK_OBJECT_HANDLE *keyPtr, void *wincx);
CERTCertificate * PK11_FindCertByIssuerAndSN(PK11SlotInfo **slot,
CERTIssuerAndSN *sn, void *wincx);
CERTCertificate * PK11_FindCertAndKeyByRecipientList(PK11SlotInfo **slot,
SEC_PKCS7RecipientInfo **array, SEC_PKCS7RecipientInfo **rip,
SECKEYPrivateKey**privKey, void *wincx);
int PK11_FindCertAndKeyByRecipientListNew(NSSCMSRecipient **recipientlist,
void *wincx);
SECStatus PK11_TraverseCertsForSubjectInSlot(CERTCertificate *cert,
PK11SlotInfo *slot, SECStatus(*callback)(CERTCertificate *, void *),
void *arg);
CERTCertificate *PK11_FindCertFromDERCert(PK11SlotInfo *slot,
CERTCertificate *cert, void *wincx);
CERTCertificate *PK11_FindCertFromDERCertItem(PK11SlotInfo *slot,
SECItem *derCert, void *wincx);
SECStatus PK11_ImportCertForKeyToSlot(PK11SlotInfo *slot, CERTCertificate *cert,
char *nickname, PRBool addUsage,
void *wincx);
CERTCertificate *PK11_FindBestKEAMatch(CERTCertificate *serverCert,void *wincx);
PRBool PK11_FortezzaHasKEA(CERTCertificate *cert);
CK_OBJECT_HANDLE PK11_FindCertInSlot(PK11SlotInfo *slot, CERTCertificate *cert,
void *wincx);
SECStatus PK11_TraverseCertsForNicknameInSlot(SECItem *nickname,
PK11SlotInfo *slot, SECStatus(*callback)(CERTCertificate *, void *),
void *arg);
CERTCertList * PK11_ListCerts(PK11CertListType type, void *pwarg);
CERTCertList * PK11_ListCertsInSlot(PK11SlotInfo *slot);
CERTSignedCrl* PK11_ImportCRL(PK11SlotInfo * slot, SECItem *derCRL, char *url,
int type, void *wincx, PRInt32 importOptions, PLArenaPool* arena, PRInt32 decodeOptions);
/**********************************************************************
* Sign/Verify
**********************************************************************/
/*
* Return the length in bytes of a signature generated with the
* private key.
*
* Return 0 or -1 on failure. (XXX Should we fix it to always return
* -1 on failure?)
*/
int PK11_SignatureLen(SECKEYPrivateKey *key);
PK11SlotInfo * PK11_GetSlotFromPrivateKey(SECKEYPrivateKey *key);
SECStatus PK11_Sign(SECKEYPrivateKey *key, SECItem *sig, SECItem *hash);
SECStatus PK11_VerifyRecover(SECKEYPublicKey *key, SECItem *sig,
SECItem *dsig, void * wincx);
SECStatus PK11_Verify(SECKEYPublicKey *key, SECItem *sig,
SECItem *hash, void *wincx);
/**********************************************************************
* Crypto Contexts
**********************************************************************/
void PK11_DestroyContext(PK11Context *context, PRBool freeit);
PK11Context *PK11_CreateContextBySymKey(CK_MECHANISM_TYPE type,
CK_ATTRIBUTE_TYPE operation, PK11SymKey *symKey, SECItem *param);
PK11Context *PK11_CreateDigestContext(SECOidTag hashAlg);
PK11Context *PK11_CloneContext(PK11Context *old);
SECStatus PK11_DigestBegin(PK11Context *cx);
/*
* The output buffer 'out' must be big enough to hold the output of
* the hash algorithm 'hashAlg'.
*/
SECStatus PK11_HashBuf(SECOidTag hashAlg, unsigned char *out, unsigned char *in,
PRInt32 len);
SECStatus PK11_DigestOp(PK11Context *context, const unsigned char *in,
unsigned len);
SECStatus PK11_CipherOp(PK11Context *context, unsigned char * out, int *outlen,
int maxout, unsigned char *in, int inlen);
SECStatus PK11_Finalize(PK11Context *context);
SECStatus PK11_DigestFinal(PK11Context *context, unsigned char *data,
unsigned int *outLen, unsigned int length);
SECStatus PK11_SaveContext(PK11Context *cx,unsigned char *save,
int *len, int saveLength);
/* Save the context's state, with possible allocation.
* The caller may supply an already allocated buffer in preAllocBuf,
* with length pabLen. If the buffer is large enough for the context's
* state, it will receive the state.
* If the buffer is not large enough (or NULL), then a new buffer will
* be allocated with PORT_Alloc.
* In either case, the state will be returned as a buffer, and the length
* of the state will be given in *stateLen.
*/
unsigned char *
PK11_SaveContextAlloc(PK11Context *cx,
unsigned char *preAllocBuf, unsigned int pabLen,
unsigned int *stateLen);
SECStatus PK11_RestoreContext(PK11Context *cx,unsigned char *save,int len);
SECStatus PK11_GenerateFortezzaIV(PK11SymKey *symKey,unsigned char *iv,int len);
void PK11_SetFortezzaHack(PK11SymKey *symKey) ;
/**********************************************************************
* PBE functions
**********************************************************************/
/* This function creates PBE parameters from the given inputs. The result
* can be used to create a password integrity key for PKCS#12, by sending
* the return value to PK11_KeyGen along with the appropriate mechanism.
*/
SECItem *
PK11_CreatePBEParams(SECItem *salt, SECItem *pwd, unsigned int iterations);
/* free params created above (can be called after keygen is done */
void PK11_DestroyPBEParams(SECItem *params);
SECAlgorithmID *
PK11_CreatePBEAlgorithmID(SECOidTag algorithm, int iteration, SECItem *salt);
/* use to create PKCS5 V2 algorithms with finder control than that provided
* by PK11_CreatePBEAlgorithmID. */
SECAlgorithmID *
PK11_CreatePBEV2AlgorithmID(SECOidTag pbeAlgTag, SECOidTag cipherAlgTag,
SECOidTag prfAlgTag, int keyLength, int iteration,
SECItem *salt);
PK11SymKey *
PK11_PBEKeyGen(PK11SlotInfo *slot, SECAlgorithmID *algid, SECItem *pwitem,
PRBool faulty3DES, void *wincx);
/* warning: cannot work with PKCS 5 v2 use PK11_PBEKeyGen instead */
PK11SymKey *
PK11_RawPBEKeyGen(PK11SlotInfo *slot, CK_MECHANISM_TYPE type, SECItem *params,
SECItem *pwitem, PRBool faulty3DES, void *wincx);
SECItem *
PK11_GetPBEIV(SECAlgorithmID *algid, SECItem *pwitem);
/*
* Get the Mechanism and parameter of the base encryption or mac scheme from
* a PBE algorithm ID.
* Caller is responsible for freeing the return parameter (param).
*/
CK_MECHANISM_TYPE
PK11_GetPBECryptoMechanism(SECAlgorithmID *algid,
SECItem **param, SECItem *pwd);
/**********************************************************************
* Functions to manage secmod flags
**********************************************************************/
PK11DefaultArrayEntry * PK11_GetDefaultArray(int *);
SECStatus PK11_UpdateSlotAttribute(PK11SlotInfo *, PK11DefaultArrayEntry *,
PRBool );
/**********************************************************************
* Functions to look at PKCS #11 dependent data
**********************************************************************/
PK11GenericObject *PK11_FindGenericObjects(PK11SlotInfo *slot,
CK_OBJECT_CLASS objClass);
PK11GenericObject *PK11_GetNextGenericObject(PK11GenericObject *object);
PK11GenericObject *PK11_GetPrevGenericObject(PK11GenericObject *object);
SECStatus PK11_UnlinkGenericObject(PK11GenericObject *object);
SECStatus PK11_LinkGenericObject(PK11GenericObject *list,
PK11GenericObject *object);
SECStatus PK11_DestroyGenericObjects(PK11GenericObject *object);
SECStatus PK11_DestroyGenericObject(PK11GenericObject *object);
PK11GenericObject *PK11_CreateGenericObject(PK11SlotInfo *slot,
const CK_ATTRIBUTE *pTemplate,
int count, PRBool token);
/*
* PK11_ReadRawAttribute and PK11_WriteRawAttribute are generic
* functions to read and modify the actual PKCS #11 attributes of
* the underlying pkcs #11 object.
*
* object is a pointer to an NSS object that represents the underlying
* PKCS #11 object. It's type must match the type of PK11ObjectType
* as follows:
*
* type object
* PK11_TypeGeneric PK11GenericObject *
* PK11_TypePrivKey SECKEYPrivateKey *
* PK11_TypePubKey SECKEYPublicKey *
* PK11_TypeSymKey PK11SymKey *
*
* All other types are considered invalid. If type does not match the object
* passed, unpredictable results will occur.
*/
SECStatus PK11_ReadRawAttribute(PK11ObjectType type, void *object,
CK_ATTRIBUTE_TYPE attr, SECItem *item);
SECStatus PK11_WriteRawAttribute(PK11ObjectType type, void *object,
CK_ATTRIBUTE_TYPE attr, SECItem *item);
/*
* PK11_GetAllSlotsForCert returns all the slots that a given certificate
* exists on, since it's possible for a cert to exist on more than one
* PKCS#11 token.
*/
PK11SlotList *
PK11_GetAllSlotsForCert(CERTCertificate *cert, void *arg);
/**********************************************************************
* New functions which are already deprecated....
**********************************************************************/
SECItem *
PK11_GetLowLevelKeyIDForCert(PK11SlotInfo *slot,
CERTCertificate *cert, void *pwarg);
SECItem *
PK11_GetLowLevelKeyIDForPrivateKey(SECKEYPrivateKey *key);
PRBool SECMOD_HasRootCerts(void);
SEC_END_PROTOS
#endif