gecko/modules/libjar/nsZipArchive.h

343 lines
9.9 KiB
C++

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is Mozilla Communicator client code, released
* March 31, 1998.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998-1999
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Daniel Veditz <dveditz@netscape.com>
* Samir Gehani <sgehani@netscape.com>
* Mitch Stoltz <mstoltz@netscape.com>
* Taras Glek <tglek@mozilla.com>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#ifndef nsZipArchive_h_
#define nsZipArchive_h_
#define ZIP_MAGIC 0x5A49505FL /* "ZIP_" */
#define ZIPFIND_MAGIC 0x5A495046L /* "ZIPF" */
#define ZIP_TABSIZE 256
// Keep this odd. The -1 is significant.
#define ZIP_BUFLEN (4 * 1024 - 1)
#define PL_ARENA_CONST_ALIGN_MASK 7
#include "plarena.h"
#define ZIP_Seek(fd,p,m) (PR_Seek((fd),((PROffset32)p),(m))==((PROffset32)p))
#include "zlib.h"
#include "nsAutoPtr.h"
class nsZipFind;
class nsZipReadState;
class nsZipItemMetadata;
struct PRFileDesc;
/**
* This file defines some of the basic structures used by libjar to
* read Zip files. It makes use of zlib in order to do the decompression.
*
* A few notes on the classes/structs:
* nsZipArchive represents a single Zip file, and maintains an index
* of all the items in the file.
* nsZipItem represents a single item (file) in the Zip archive.
* nsZipFind represents the metadata involved in doing a search,
* and current state of the iteration of found objects.
* 'MT''safe' reading from the zipfile is performed through JARInputStream,
* which maintains its own file descriptor, allowing for multiple reads
* concurrently from the same zip file.
*/
/**
* nsZipItem -- a helper struct for nsZipArchive
*
* each nsZipItem represents one file in the archive and all the
* information needed to manipulate it.
*/
struct nsZipItem
{
nsZipItem* next;
PRUint32 headerOffset;
PRUint32 dataOffset;
PRUint32 size; /* size in original file */
PRUint32 realsize; /* inflated size */
PRUint32 crc32;
/*
* Keep small items together, to avoid overhead.
*/
PRUint16 time;
PRUint16 date;
PRUint16 mode;
PRUint8 compression;
PRPackedBool hasDataOffset : 1;
PRPackedBool isDirectory : 1;
PRPackedBool isSynthetic : 1; /* whether item is an actual zip entry or was
generated as part of a real entry's path,
e.g. foo/ in a zip containing only foo/a.txt
and no foo/ entry is synthetic */
#if defined(XP_UNIX) || defined(XP_BEOS)
PRPackedBool isSymlink : 1;
#endif
char name[1]; // actually, bigger than 1
};
class nsZipHandle;
class nsSeekableZipHandle;
/**
* nsZipArchive -- a class for reading the PKZIP file format.
*
*/
class nsZipArchive
{
friend class nsZipFind;
public:
/** constructing does not open the archive. See OpenArchive() */
nsZipArchive();
/** destructing the object closes the archive */
~nsZipArchive();
/**
* OpenArchive
*
* It's an error to call this more than once on the same nsZipArchive
* object. If we were allowed to use exceptions this would have been
* part of the constructor
*
* @param fd File descriptor of file to open
* @return status code
*/
nsresult OpenArchive(PRFileDesc* fd);
/**
* Test the integrity of items in this archive by running
* a CRC check after extracting each item into a memory
* buffer. If an entry name is supplied only the
* specified item is tested. Else, if null is supplied
* then all the items in the archive are tested.
*
* @return status code
*/
nsresult Test(const char *aEntryName);
/**
* Closes an open archive.
*/
nsresult CloseArchive();
/**
* GetItem
* @param aEntryName Name of file in the archive
* @return pointer to nsZipItem
*/
nsZipItem* GetItem(const char * aEntryName);
/**
* ExtractFile
*
* @param zipEntry Name of file in archive to extract
* @param outFD Filedescriptor to write contents to
* @param outname Name of file to write to
* @return status code
*/
nsresult ExtractFile(nsZipItem * zipEntry, const char *outname, PRFileDesc * outFD);
/**
* FindInit
*
* Initializes a search for files in the archive. FindNext() returns
* the actual matches. The nsZipFind must be deleted when you're done
*
* @param aPattern a string or RegExp pattern to search for
* (may be NULL to find all files in archive)
* @param aFind a pointer to a pointer to a structure used
* in FindNext. In the case of an error this
* will be set to NULL.
* @return status code
*/
PRInt32 FindInit(const char * aPattern, nsZipFind** aFind);
/* Gets an undependent handle to the jar
* Also ensures that aItem is fully filled
*/
nsZipHandle* GetFD(nsZipItem* aItem);
private:
//--- private members ---
nsZipItem* mFiles[ZIP_TABSIZE];
PLArenaPool mArena;
/**
* Fills in nsZipItem fields that were not filled in by BuildFileList
* @param aItem Pointer to nsZipItem
* returns true if the item was filled in successfully
*/
bool MaybeReadItem(nsZipItem* aItem);
// Whether we synthesized the directory entries
PRPackedBool mBuiltSynthetics;
// file handle
nsRefPtr<nsZipHandle> mFd;
//--- private methods ---
nsZipArchive& operator=(const nsZipArchive& rhs); // prevent assignments
nsZipArchive(const nsZipArchive& rhs); // prevent copies
nsZipItem* CreateZipItem(PRUint16 namelen);
nsresult BuildFileList();
nsresult BuildSynthetics();
nsresult CopyItemToDisk(PRUint32 size, PRUint32 crc, nsSeekableZipHandle &fd, PRFileDesc* outFD);
nsresult InflateItem(const nsZipItem* aItem, nsSeekableZipHandle &fd, PRFileDesc* outFD);
};
class nsZipHandle {
friend class nsZipArchive;
friend class nsSeekableZipHandle;
public:
static nsresult Init(PRFileDesc *fd, nsZipHandle **ret NS_OUTPARAM);
/**
* Reads data at a certain point
* @param aPosition seek ofset
* @param aBuffer buffer
* @param aCount number of bytes to read */
PRInt32 Read(PRUint32 aPosition, void *aBuffer, PRUint32 aCount);
NS_METHOD_(nsrefcnt) AddRef(void);
NS_METHOD_(nsrefcnt) Release(void);
protected:
PRFileDesc *mFd; // OS file-descriptor
PRUint8 *mFileData; // pointer to mmaped file
PRUint32 mLen; // length of file and memory mapped area
private:
nsZipHandle();
~nsZipHandle();
PRFileMap *mMap; // nspr datastructure for mmap
nsrefcnt mRefCnt; // ref count
};
/** nsSeekableZipHandle acts as a container for nsZipHandle,
emulates sequential file io */
class nsSeekableZipHandle {
// stick nsZipItem in here
public:
nsSeekableZipHandle()
: mOffset(0)
, mRemaining(0)
{
}
/** Initializes nsSeekableZipHandle with
* @param aOffset byte offset of the file to start reading at
* @param length of this descriptor
*/
bool Open(nsZipHandle *aHandle, PRUint32 aOffset, PRUint32 aLength) {
NS_ABORT_IF_FALSE (aHandle, "Argument must not be NULL");
if (aOffset > aHandle->mLen)
return false;
mFd = aHandle;
mOffset = aOffset;
mRemaining = aLength;
return true;
}
/** Releases the file handle. It is safe to call multiple times. */
void Close()
{
mFd = NULL;
}
/**
* Reads data at a certain point
* @param aBuffer input buffer
* @param aCount number of bytes to read */
PRInt32 Read(void *aBuffer, PRUint32 aCount)
{
if (!mFd.get())
return -1;
aCount = PR_MIN(mRemaining, aCount);
PRInt32 ret = mFd->Read(mOffset, aBuffer, aCount);
if (ret > 0) {
mOffset += ret;
mRemaining -= ret;
}
return ret;
}
private:
nsRefPtr<nsZipHandle> mFd; // file handle
PRUint32 mOffset; // current reading offset
PRUint32 mRemaining; // bytes remaining
};
/**
* nsZipFind
*
* a helper class for nsZipArchive, representing a search
*/
class nsZipFind
{
public:
nsZipFind(nsZipArchive* aZip, char* aPattern, PRBool regExp);
~nsZipFind();
nsresult FindNext(const char ** aResult);
private:
nsZipArchive* mArchive;
char* mPattern;
nsZipItem* mItem;
PRUint16 mSlot;
PRPackedBool mRegExp;
//-- prevent copies and assignments
nsZipFind& operator=(const nsZipFind& rhs);
nsZipFind(const nsZipFind& rhs);
};
nsresult gZlibInit(z_stream *zs);
#endif /* nsZipArchive_h_ */