/* ***** BEGIN LICENSE BLOCK ***** * Version: MPL 1.1/GPL 2.0/LGPL 2.1 * * The contents of this file are subject to the Mozilla Public License Version * 1.1 (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License * for the specific language governing rights and limitations under the * License. * * The Original Code is the Netscape security libraries. * * The Initial Developer of the Original Code is * Netscape Communications Corporation. * Portions created by the Initial Developer are Copyright (C) 1994-2000 * the Initial Developer. All Rights Reserved. * * Contributor(s): * Dr Vipul Gupta , Sun Microsystems Laboratories * * Alternatively, the contents of this file may be used under the terms of * either the GNU General Public License Version 2 or later (the "GPL"), or * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), * in which case the provisions of the GPL or the LGPL are applicable instead * of those above. If you wish to allow use of your version of this file only * under the terms of either the GPL or the LGPL, and not to allow others to * use your version of this file under the terms of the MPL, indicate your * decision by deleting the provisions above and replace them with the notice * and other provisions required by the GPL or the LGPL. If you do not delete * the provisions above, a recipient may use your version of this file under * the terms of any one of the MPL, the GPL or the LGPL. * * ***** END LICENSE BLOCK ***** */ /* ** certutil.c ** ** utility for managing certificates and the cert database ** */ #include #include #include #if defined(WIN32) #include "fcntl.h" #include "io.h" #endif #include "secutil.h" #if defined(XP_UNIX) #include #endif #include "nspr.h" #include "prtypes.h" #include "prtime.h" #include "prlong.h" #include "pk11func.h" #include "secasn1.h" #include "cert.h" #include "cryptohi.h" #include "secoid.h" #include "certdb.h" #include "nss.h" #include "certutil.h" #define MIN_KEY_BITS 512 /* MAX_KEY_BITS should agree with MAX_RSA_MODULUS in freebl */ #define MAX_KEY_BITS 8192 #define DEFAULT_KEY_BITS 1024 #define GEN_BREAK(e) rv=e; break; char *progName; static CERTCertificateRequest * GetCertRequest(PRFileDesc *inFile, PRBool ascii) { CERTCertificateRequest *certReq = NULL; CERTSignedData signedData; PRArenaPool *arena = NULL; SECItem reqDER; SECStatus rv; reqDER.data = NULL; do { arena = PORT_NewArena(DER_DEFAULT_CHUNKSIZE); if (arena == NULL) { GEN_BREAK (SECFailure); } rv = SECU_ReadDERFromFile(&reqDER, inFile, ascii); if (rv) { break; } certReq = (CERTCertificateRequest*) PORT_ArenaZAlloc (arena, sizeof(CERTCertificateRequest)); if (!certReq) { GEN_BREAK(SECFailure); } certReq->arena = arena; /* Since cert request is a signed data, must decode to get the inner data */ PORT_Memset(&signedData, 0, sizeof(signedData)); rv = SEC_ASN1DecodeItem(arena, &signedData, SEC_ASN1_GET(CERT_SignedDataTemplate), &reqDER); if (rv) { break; } rv = SEC_ASN1DecodeItem(arena, certReq, SEC_ASN1_GET(CERT_CertificateRequestTemplate), &signedData.data); if (rv) { break; } rv = CERT_VerifySignedDataWithPublicKeyInfo(&signedData, &certReq->subjectPublicKeyInfo, NULL /* wincx */); } while (0); if (reqDER.data) { SECITEM_FreeItem(&reqDER, PR_FALSE); } if (rv) { SECU_PrintError(progName, "bad certificate request\n"); if (arena) { PORT_FreeArena(arena, PR_FALSE); } certReq = NULL; } return certReq; } static SECStatus AddCert(PK11SlotInfo *slot, CERTCertDBHandle *handle, char *name, char *trusts, PRFileDesc *inFile, PRBool ascii, PRBool emailcert, void *pwdata) { CERTCertTrust *trust = NULL; CERTCertificate *cert = NULL; SECItem certDER; SECStatus rv; certDER.data = NULL; do { /* Read in the entire file specified with the -i argument */ rv = SECU_ReadDERFromFile(&certDER, inFile, ascii); if (rv != SECSuccess) { SECU_PrintError(progName, "unable to read input file"); break; } /* Read in an ASCII cert and return a CERTCertificate */ cert = CERT_DecodeCertFromPackage((char *)certDER.data, certDER.len); if (!cert) { SECU_PrintError(progName, "could not obtain certificate from file"); GEN_BREAK(SECFailure); } /* Create a cert trust */ trust = (CERTCertTrust *)PORT_ZAlloc(sizeof(CERTCertTrust)); if (!trust) { SECU_PrintError(progName, "unable to allocate cert trust"); GEN_BREAK(SECFailure); } rv = CERT_DecodeTrustString(trust, trusts); if (rv) { SECU_PrintError(progName, "unable to decode trust string"); GEN_BREAK(SECFailure); } rv = PK11_ImportCert(slot, cert, CK_INVALID_HANDLE, name, PR_FALSE); if (rv != SECSuccess) { /* sigh, PK11_Import Cert and CERT_ChangeCertTrust should have * been coded to take a password arg. */ if (PORT_GetError() == SEC_ERROR_TOKEN_NOT_LOGGED_IN) { rv = PK11_Authenticate(slot, PR_TRUE, pwdata); if (rv != SECSuccess) { SECU_PrintError(progName, "could not authenticate to token %s.", PK11_GetTokenName(slot)); GEN_BREAK(SECFailure); } rv = PK11_ImportCert(slot, cert, CK_INVALID_HANDLE, name, PR_FALSE); } if (rv != SECSuccess) { SECU_PrintError(progName, "could not add certificate to token or database"); GEN_BREAK(SECFailure); } } rv = CERT_ChangeCertTrust(handle, cert, trust); if (rv != SECSuccess) { if (PORT_GetError() == SEC_ERROR_TOKEN_NOT_LOGGED_IN) { rv = PK11_Authenticate(slot, PR_TRUE, pwdata); if (rv != SECSuccess) { SECU_PrintError(progName, "could not authenticate to token %s.", PK11_GetTokenName(slot)); GEN_BREAK(SECFailure); } rv = CERT_ChangeCertTrust(handle, cert, trust); } if (rv != SECSuccess) { SECU_PrintError(progName, "could not change trust on certificate"); GEN_BREAK(SECFailure); } } if ( emailcert ) { CERT_SaveSMimeProfile(cert, NULL, pwdata); } } while (0); CERT_DestroyCertificate (cert); PORT_Free(trust); PORT_Free(certDER.data); return rv; } static SECStatus CertReq(SECKEYPrivateKey *privk, SECKEYPublicKey *pubk, KeyType keyType, SECOidTag hashAlgTag, CERTName *subject, char *phone, int ascii, const char *emailAddrs, const char *dnsNames, certutilExtnList extnList, PRFileDesc *outFile) { CERTSubjectPublicKeyInfo *spki; CERTCertificateRequest *cr; SECItem *encoding; SECOidTag signAlgTag; SECItem result; SECStatus rv; PRArenaPool *arena; PRInt32 numBytes; void *extHandle; /* Create info about public key */ spki = SECKEY_CreateSubjectPublicKeyInfo(pubk); if (!spki) { SECU_PrintError(progName, "unable to create subject public key"); return SECFailure; } /* Generate certificate request */ cr = CERT_CreateCertificateRequest(subject, spki, NULL); SECKEY_DestroySubjectPublicKeyInfo(spki); if (!cr) { SECU_PrintError(progName, "unable to make certificate request"); return SECFailure; } arena = PORT_NewArena(DER_DEFAULT_CHUNKSIZE); if ( !arena ) { SECU_PrintError(progName, "out of memory"); return SECFailure; } extHandle = CERT_StartCertificateRequestAttributes(cr); if (extHandle == NULL) { PORT_FreeArena (arena, PR_FALSE); return SECFailure; } if (AddExtensions(extHandle, emailAddrs, dnsNames, extnList) != SECSuccess) { PORT_FreeArena (arena, PR_FALSE); return SECFailure; } CERT_FinishExtensions(extHandle); CERT_FinishCertificateRequestAttributes(cr); /* Der encode the request */ encoding = SEC_ASN1EncodeItem(arena, NULL, cr, SEC_ASN1_GET(CERT_CertificateRequestTemplate)); if (encoding == NULL) { SECU_PrintError(progName, "der encoding of request failed"); return SECFailure; } /* Sign the request */ signAlgTag = SEC_GetSignatureAlgorithmOidTag(keyType, hashAlgTag); if (signAlgTag == SEC_OID_UNKNOWN) { SECU_PrintError(progName, "unknown Key or Hash type"); return SECFailure; } rv = SEC_DerSignData(arena, &result, encoding->data, encoding->len, privk, signAlgTag); if (rv) { SECU_PrintError(progName, "signing of data failed"); return SECFailure; } /* Encode request in specified format */ if (ascii) { char *obuf; char *name, *email, *org, *state, *country; SECItem *it; int total; it = &result; obuf = BTOA_ConvertItemToAscii(it); total = PL_strlen(obuf); name = CERT_GetCommonName(subject); if (!name) { name = strdup("(not specified)"); } if (!phone) phone = strdup("(not specified)"); email = CERT_GetCertEmailAddress(subject); if (!email) email = strdup("(not specified)"); org = CERT_GetOrgName(subject); if (!org) org = strdup("(not specified)"); state = CERT_GetStateName(subject); if (!state) state = strdup("(not specified)"); country = CERT_GetCountryName(subject); if (!country) country = strdup("(not specified)"); PR_fprintf(outFile, "\nCertificate request generated by Netscape certutil\n"); PR_fprintf(outFile, "Phone: %s\n\n", phone); PR_fprintf(outFile, "Common Name: %s\n", name); PR_fprintf(outFile, "Email: %s\n", email); PR_fprintf(outFile, "Organization: %s\n", org); PR_fprintf(outFile, "State: %s\n", state); PR_fprintf(outFile, "Country: %s\n\n", country); PR_fprintf(outFile, "%s\n", NS_CERTREQ_HEADER); numBytes = PR_Write(outFile, obuf, total); if (numBytes != total) { SECU_PrintSystemError(progName, "write error"); return SECFailure; } PR_fprintf(outFile, "\n%s\n", NS_CERTREQ_TRAILER); } else { numBytes = PR_Write(outFile, result.data, result.len); if (numBytes != (int)result.len) { SECU_PrintSystemError(progName, "write error"); return SECFailure; } } return SECSuccess; } static SECStatus ChangeTrustAttributes(CERTCertDBHandle *handle, PK11SlotInfo *slot, char *name, char *trusts, void *pwdata) { SECStatus rv; CERTCertificate *cert; CERTCertTrust *trust; cert = CERT_FindCertByNicknameOrEmailAddr(handle, name); if (!cert) { SECU_PrintError(progName, "could not find certificate named \"%s\"", name); return SECFailure; } trust = (CERTCertTrust *)PORT_ZAlloc(sizeof(CERTCertTrust)); if (!trust) { SECU_PrintError(progName, "unable to allocate cert trust"); return SECFailure; } /* This function only decodes these characters: pPwcTCu, */ rv = CERT_DecodeTrustString(trust, trusts); if (rv) { SECU_PrintError(progName, "unable to decode trust string"); return SECFailure; } /* CERT_ChangeCertTrust API does not have a way to pass in * a context, so NSS can't prompt for the password if it needs to. * check to see if the failure was token not logged in and * log in if need be. */ rv = CERT_ChangeCertTrust(handle, cert, trust); if (rv != SECSuccess) { if (PORT_GetError() == SEC_ERROR_TOKEN_NOT_LOGGED_IN) { rv = PK11_Authenticate(slot, PR_TRUE, pwdata); if (rv != SECSuccess) { SECU_PrintError(progName, "could not authenticate to token %s.", PK11_GetTokenName(slot)); return SECFailure; } rv = CERT_ChangeCertTrust(handle, cert, trust); } if (rv != SECSuccess) { SECU_PrintError(progName, "unable to modify trust attributes"); return SECFailure; } } CERT_DestroyCertificate(cert); return SECSuccess; } static SECStatus DumpChain(CERTCertDBHandle *handle, char *name) { CERTCertificate *the_cert; CERTCertificateList *chain; int i, j; the_cert = PK11_FindCertFromNickname(name, NULL); if (!the_cert) { SECU_PrintError(progName, "Could not find: %s\n", name); return SECFailure; } chain = CERT_CertChainFromCert(the_cert, 0, PR_TRUE); CERT_DestroyCertificate(the_cert); if (!chain) { SECU_PrintError(progName, "Could not obtain chain for: %s\n", name); return SECFailure; } for (i=chain->len-1; i>=0; i--) { CERTCertificate *c; c = CERT_FindCertByDERCert(handle, &chain->certs[i]); for (j=i; jlen-1; j++) printf(" "); printf("\"%s\" [%s]\n\n", c->nickname, c->subjectName); CERT_DestroyCertificate(c); } CERT_DestroyCertificateList(chain); return SECSuccess; } static SECStatus listCerts(CERTCertDBHandle *handle, char *name, PK11SlotInfo *slot, PRBool raw, PRBool ascii, PRFileDesc *outfile, void *pwarg) { SECItem data; PRInt32 numBytes; SECStatus rv = SECFailure; CERTCertList *certs; CERTCertListNode *node; /* List certs on a non-internal slot. */ if (!PK11_IsFriendly(slot) && PK11_NeedLogin(slot)) { SECStatus newrv = PK11_Authenticate(slot, PR_TRUE, pwarg); if (newrv != SECSuccess) { SECU_PrintError(progName, "could not authenticate to token %s.", PK11_GetTokenName(slot)); return SECFailure; } } if (name) { CERTCertificate *the_cert; the_cert = CERT_FindCertByNicknameOrEmailAddr(handle, name); if (!the_cert) { the_cert = PK11_FindCertFromNickname(name, NULL); if (!the_cert) { SECU_PrintError(progName, "Could not find: %s\n", name); return SECFailure; } } /* Here, we have one cert with the desired nickname or email * address. Now, we will attempt to get a list of ALL certs * with the same subject name as the cert we have. That list * should contain, at a minimum, the one cert we have already found. * If the list of certs is empty (NULL), the libraries have failed. */ certs = CERT_CreateSubjectCertList(NULL, handle, &the_cert->derSubject, PR_Now(), PR_FALSE); CERT_DestroyCertificate(the_cert); if (!certs) { PORT_SetError(SEC_ERROR_LIBRARY_FAILURE); SECU_PrintError(progName, "problem printing certificates"); return SECFailure; } for (node = CERT_LIST_HEAD(certs); !CERT_LIST_END(node,certs); node = CERT_LIST_NEXT(node)) { the_cert = node->cert; /* now get the subjectList that matches this cert */ data.data = the_cert->derCert.data; data.len = the_cert->derCert.len; if (ascii) { PR_fprintf(outfile, "%s\n%s\n%s\n", NS_CERT_HEADER, BTOA_DataToAscii(data.data, data.len), NS_CERT_TRAILER); rv = SECSuccess; } else if (raw) { numBytes = PR_Write(outfile, data.data, data.len); if (numBytes != (PRInt32) data.len) { SECU_PrintSystemError(progName, "error writing raw cert"); rv = SECFailure; } rv = SECSuccess; } else { rv = SEC_PrintCertificateAndTrust(the_cert, "Certificate", the_cert->trust); if (rv != SECSuccess) { SECU_PrintError(progName, "problem printing certificate"); } } if (rv != SECSuccess) { break; } } } else { certs = PK11_ListCertsInSlot(slot); if (certs) { for (node = CERT_LIST_HEAD(certs); !CERT_LIST_END(node,certs); node = CERT_LIST_NEXT(node)) { SECU_PrintCertNickname(node,stdout); } rv = SECSuccess; } } if (certs) { CERT_DestroyCertList(certs); } if (rv) { SECU_PrintError(progName, "problem printing certificate nicknames"); return SECFailure; } return SECSuccess; /* not rv ?? */ } static SECStatus ListCerts(CERTCertDBHandle *handle, char *nickname, PK11SlotInfo *slot, PRBool raw, PRBool ascii, PRFileDesc *outfile, secuPWData *pwdata) { SECStatus rv; if (!ascii && !raw && !nickname) { PR_fprintf(outfile, "\n%-60s %-5s\n%-60s %-5s\n\n", "Certificate Nickname", "Trust Attributes", "", "SSL,S/MIME,JAR/XPI"); } if (slot == NULL) { CERTCertList *list; CERTCertListNode *node; list = PK11_ListCerts(PK11CertListAll, pwdata); for (node = CERT_LIST_HEAD(list); !CERT_LIST_END(node, list); node = CERT_LIST_NEXT(node)) { SECU_PrintCertNickname(node, stdout); } CERT_DestroyCertList(list); return SECSuccess; } else { rv = listCerts(handle,nickname,slot,raw,ascii,outfile,pwdata); } return rv; } static SECStatus DeleteCert(CERTCertDBHandle *handle, char *name) { SECStatus rv; CERTCertificate *cert; cert = CERT_FindCertByNicknameOrEmailAddr(handle, name); if (!cert) { SECU_PrintError(progName, "could not find certificate named \"%s\"", name); return SECFailure; } rv = SEC_DeletePermCertificate(cert); CERT_DestroyCertificate(cert); if (rv) { SECU_PrintError(progName, "unable to delete certificate"); return SECFailure; } return SECSuccess; } static SECStatus ValidateCert(CERTCertDBHandle *handle, char *name, char *date, char *certUsage, PRBool checkSig, PRBool logit, secuPWData *pwdata) { SECStatus rv; CERTCertificate *cert = NULL; int64 timeBoundary; SECCertificateUsage usage; CERTVerifyLog reallog; CERTVerifyLog *log = NULL; if (!certUsage) { PORT_SetError (SEC_ERROR_INVALID_ARGS); return (SECFailure); } switch (*certUsage) { case 'O': usage = certificateUsageStatusResponder; break; case 'C': usage = certificateUsageSSLClient; break; case 'V': usage = certificateUsageSSLServer; break; case 'S': usage = certificateUsageEmailSigner; break; case 'R': usage = certificateUsageEmailRecipient; break; case 'J': usage = certificateUsageObjectSigner; break; default: PORT_SetError (SEC_ERROR_INVALID_ARGS); return (SECFailure); } do { cert = CERT_FindCertByNicknameOrEmailAddr(handle, name); if (!cert) { SECU_PrintError(progName, "could not find certificate named \"%s\"", name); GEN_BREAK (SECFailure) } if (date != NULL) { rv = DER_AsciiToTime(&timeBoundary, date); if (rv) { SECU_PrintError(progName, "invalid input date"); GEN_BREAK (SECFailure) } } else { timeBoundary = PR_Now(); } if ( logit ) { log = &reallog; log->count = 0; log->head = NULL; log->tail = NULL; log->arena = PORT_NewArena(DER_DEFAULT_CHUNKSIZE); if ( log->arena == NULL ) { SECU_PrintError(progName, "out of memory"); GEN_BREAK (SECFailure) } } rv = CERT_VerifyCertificate(handle, cert, checkSig, usage, timeBoundary, pwdata, log, &usage); if ( log ) { if ( log->head == NULL ) { fprintf(stdout, "%s: certificate is valid\n", progName); GEN_BREAK (SECSuccess) } else { char *name; CERTVerifyLogNode *node; node = log->head; while ( node ) { if ( node->cert->nickname != NULL ) { name = node->cert->nickname; } else { name = node->cert->subjectName; } fprintf(stderr, "%s : %s\n", name, SECU_Strerror(node->error)); CERT_DestroyCertificate(node->cert); node = node->next; } } } else { if (rv != SECSuccess) { PRErrorCode perr = PORT_GetError(); fprintf(stdout, "%s: certificate is invalid: %s\n", progName, SECU_Strerror(perr)); GEN_BREAK (SECFailure) } fprintf(stdout, "%s: certificate is valid\n", progName); GEN_BREAK (SECSuccess) } } while (0); if (cert) { CERT_DestroyCertificate(cert); } return (rv); } static PRBool ItemIsPrintableASCII(const SECItem * item) { unsigned char *src = item->data; unsigned int len = item->len; while (len-- > 0) { unsigned char uc = *src++; if (uc < 0x20 || uc > 0x7e) return PR_FALSE; } return PR_TRUE; } /* Caller ensures that dst is at least item->len*2+1 bytes long */ static void SECItemToHex(const SECItem * item, char * dst) { if (dst && item && item->data) { unsigned char * src = item->data; unsigned int len = item->len; for (; len > 0; --len, dst += 2) { sprintf(dst, "%02x", *src++); } *dst = '\0'; } } static const char * const keyTypeName[] = { "null", "rsa", "dsa", "fortezza", "dh", "kea", "ec" }; #define MAX_CKA_ID_BIN_LEN 20 #define MAX_CKA_ID_STR_LEN 40 /* print key number, key ID (in hex or ASCII), key label (nickname) */ static SECStatus PrintKey(PRFileDesc *out, const char *nickName, int count, SECKEYPrivateKey *key, void *pwarg) { SECItem * ckaID; char ckaIDbuf[MAX_CKA_ID_STR_LEN + 4]; pwarg = NULL; ckaID = PK11_GetLowLevelKeyIDForPrivateKey(key); if (!ckaID) { strcpy(ckaIDbuf, "(no CKA_ID)"); } else if (ItemIsPrintableASCII(ckaID)) { int len = PR_MIN(MAX_CKA_ID_STR_LEN, ckaID->len); ckaIDbuf[0] = '"'; memcpy(ckaIDbuf + 1, ckaID->data, len); ckaIDbuf[1 + len] = '"'; ckaIDbuf[2 + len] = '\0'; } else { /* print ckaid in hex */ SECItem idItem = *ckaID; if (idItem.len > MAX_CKA_ID_BIN_LEN) idItem.len = MAX_CKA_ID_BIN_LEN; SECItemToHex(&idItem, ckaIDbuf); } PR_fprintf(out, "<%2d> %-8.8s %-42.42s %s\n", count, keyTypeName[key->keyType], ckaIDbuf, nickName); SECITEM_ZfreeItem(ckaID, PR_TRUE); return SECSuccess; } /* returns SECSuccess if ANY keys are found, SECFailure otherwise. */ static SECStatus ListKeysInSlot(PK11SlotInfo *slot, const char *nickName, KeyType keyType, void *pwarg) { SECKEYPrivateKeyList *list; SECKEYPrivateKeyListNode *node; int count = 0; if (PK11_NeedLogin(slot)) { SECStatus rv = PK11_Authenticate(slot, PR_TRUE, pwarg); if (rv != SECSuccess) { SECU_PrintError(progName, "could not authenticate to token %s.", PK11_GetTokenName(slot)); return SECFailure; } } if (nickName && nickName[0]) list = PK11_ListPrivKeysInSlot(slot, (char *)nickName, pwarg); else list = PK11_ListPrivateKeysInSlot(slot); if (list == NULL) { SECU_PrintError(progName, "problem listing keys"); return SECFailure; } for (node=PRIVKEY_LIST_HEAD(list); !PRIVKEY_LIST_END(node,list); node=PRIVKEY_LIST_NEXT(node)) { char * keyName; static const char orphan[] = { "(orphan)" }; if (keyType != nullKey && keyType != node->key->keyType) continue; keyName = PK11_GetPrivateKeyNickname(node->key); if (!keyName || !keyName[0]) { /* Try extra hard to find nicknames for keys that lack them. */ CERTCertificate * cert; PORT_Free((void *)keyName); keyName = NULL; cert = PK11_GetCertFromPrivateKey(node->key); if (cert) { if (cert->nickname && cert->nickname[0]) { keyName = PORT_Strdup(cert->nickname); } else if (cert->emailAddr && cert->emailAddr[0]) { keyName = PORT_Strdup(cert->emailAddr); } CERT_DestroyCertificate(cert); } } if (nickName) { if (!keyName || PL_strcmp(keyName,nickName)) { /* PKCS#11 module returned unwanted keys */ PORT_Free((void *)keyName); continue; } } if (!keyName) keyName = (char *)orphan; PrintKey(PR_STDOUT, keyName, count, node->key, pwarg); if (keyName != (char *)orphan) PORT_Free((void *)keyName); count++; } SECKEY_DestroyPrivateKeyList(list); if (count == 0) { PR_fprintf(PR_STDOUT, "%s: no keys found\n", progName); return SECFailure; } return SECSuccess; } /* returns SECSuccess if ANY keys are found, SECFailure otherwise. */ static SECStatus ListKeys(PK11SlotInfo *slot, const char *nickName, int index, KeyType keyType, PRBool dopriv, secuPWData *pwdata) { SECStatus rv = SECFailure; static const char fmt[] = \ "%s: Checking token \"%.33s\" in slot \"%.65s\"\n"; if (slot == NULL) { PK11SlotList *list; PK11SlotListElement *le; list= PK11_GetAllTokens(CKM_INVALID_MECHANISM,PR_FALSE,PR_FALSE,pwdata); if (list) { for (le = list->head; le; le = le->next) { PR_fprintf(PR_STDOUT, fmt, progName, PK11_GetTokenName(le->slot), PK11_GetSlotName(le->slot)); rv &= ListKeysInSlot(le->slot,nickName,keyType,pwdata); } PK11_FreeSlotList(list); } } else { PR_fprintf(PR_STDOUT, fmt, progName, PK11_GetTokenName(slot), PK11_GetSlotName(slot)); rv = ListKeysInSlot(slot,nickName,keyType,pwdata); } return rv; } static SECStatus DeleteKey(char *nickname, secuPWData *pwdata) { SECStatus rv; CERTCertificate *cert; PK11SlotInfo *slot; slot = PK11_GetInternalKeySlot(); if (PK11_NeedLogin(slot)) { SECStatus rv = PK11_Authenticate(slot, PR_TRUE, pwdata); if (rv != SECSuccess) { SECU_PrintError(progName, "could not authenticate to token %s.", PK11_GetTokenName(slot)); return SECFailure; } } cert = PK11_FindCertFromNickname(nickname, pwdata); if (!cert) { PK11_FreeSlot(slot); return SECFailure; } rv = PK11_DeleteTokenCertAndKey(cert, pwdata); if (rv != SECSuccess) { SECU_PrintError("problem deleting private key \"%s\"\n", nickname); } CERT_DestroyCertificate(cert); PK11_FreeSlot(slot); return rv; } /* * L i s t M o d u l e s * * Print a list of the PKCS11 modules that are * available. This is useful for smartcard people to * make sure they have the drivers loaded. * */ static SECStatus ListModules(void) { PK11SlotList *list; PK11SlotListElement *le; /* get them all! */ list = PK11_GetAllTokens(CKM_INVALID_MECHANISM,PR_FALSE,PR_FALSE,NULL); if (list == NULL) return SECFailure; /* look at each slot*/ for (le = list->head ; le; le = le->next) { printf ("\n"); printf (" slot: %s\n", PK11_GetSlotName(le->slot)); printf (" token: %s\n", PK11_GetTokenName(le->slot)); } PK11_FreeSlotList(list); return SECSuccess; } static void Usage(char *progName) { #define FPS fprintf(stderr, FPS "Type %s -H for more detailed descriptions\n", progName); FPS "Usage: %s -N [-d certdir] [-P dbprefix] [-f pwfile]\n", progName); FPS "Usage: %s -T [-d certdir] [-P dbprefix] [-h token-name]\n" "\t\t [-f pwfile] [-0 SSO-password]\n", progName); FPS "\t%s -A -n cert-name -t trustargs [-d certdir] [-P dbprefix] [-a] [-i input]\n", progName); FPS "\t%s -B -i batch-file\n", progName); FPS "\t%s -C [-c issuer-name | -x] -i cert-request-file -o cert-file\n" "\t\t [-m serial-number] [-w warp-months] [-v months-valid]\n" "\t\t [-f pwfile] [-d certdir] [-P dbprefix]\n" "\t\t [-1 | --keyUsage [keyUsageKeyword,..]] [-2] [-3] [-4]\n" "\t\t [-5 | --nsCertType [nsCertTypeKeyword,...]]\n" "\t\t [-6 | --extKeyUsage [extKeyUsageKeyword,...]] [-7 emailAddrs]\n" "\t\t [-8 dns-names] [-a]\n", progName); FPS "\t%s -D -n cert-name [-d certdir] [-P dbprefix]\n", progName); FPS "\t%s -E -n cert-name -t trustargs [-d certdir] [-P dbprefix] [-a] [-i input]\n", progName); FPS "\t%s -G -n key-name [-h token-name] [-k rsa] [-g key-size] [-y exp]\n" "\t\t [-f pwfile] [-z noisefile] [-d certdir] [-P dbprefix]\n", progName); FPS "\t%s -G [-h token-name] -k dsa [-q pqgfile -g key-size] [-f pwfile]\n" "\t\t [-z noisefile] [-d certdir] [-P dbprefix]\n", progName); #ifdef NSS_ENABLE_ECC FPS "\t%s -G [-h token-name] -k ec -q curve [-f pwfile]\n" "\t\t [-z noisefile] [-d certdir] [-P dbprefix]\n", progName); FPS "\t%s -K [-n key-name] [-h token-name] [-k dsa|ec|rsa|all]\n", progName); #else FPS "\t%s -K [-n key-name] [-h token-name] [-k dsa|rsa|all]\n", progName); #endif /* NSS_ENABLE_ECC */ FPS "\t\t [-f pwfile] [-X] [-d certdir] [-P dbprefix]\n"); FPS "\t%s --upgrade-merge --source-dir upgradeDir --upgrade-id uniqueID\n", progName); FPS "\t\t [--upgrade-token-name tokenName] [-d targetDBDir]\n"); FPS "\t\t [-P targetDBPrefix] [--source-prefix upgradeDBPrefix]\n"); FPS "\t\t [-f targetPWfile] [-@ upgradePWFile]\n"); FPS "\t%s --merge --source-dir sourceDBDir [-d targetDBdir]\n", progName); FPS "\t\t [-P targetDBPrefix] [--source-prefix sourceDBPrefix]\n"); FPS "\t\t [-f targetPWfile] [-@ sourcePWFile]\n"); FPS "\t%s -L [-n cert-name] [-X] [-d certdir] [-P dbprefix] [-r] [-a]\n", progName); FPS "\t%s -M -n cert-name -t trustargs [-d certdir] [-P dbprefix]\n", progName); FPS "\t%s -O -n cert-name [-X] [-d certdir] [-P dbprefix]\n", progName); FPS "\t%s -R -s subj -o cert-request-file [-d certdir] [-P dbprefix] [-p phone] [-a]\n" "\t\t [-7 emailAddrs] [-k key-type-or-id] [-h token-name] [-f pwfile] [-g key-size]\n", progName); FPS "\t%s -V -n cert-name -u usage [-b time] [-e] \n" "\t\t[-X] [-d certdir] [-P dbprefix]\n", progName); FPS "\t%s -S -n cert-name -s subj [-c issuer-name | -x] -t trustargs\n" "\t\t [-k key-type-or-id] [-q key-params] [-h token-name] [-g key-size]\n" "\t\t [-m serial-number] [-w warp-months] [-v months-valid]\n" "\t\t [-f pwfile] [-d certdir] [-P dbprefix]\n" "\t\t [-p phone] [-1] [-2] [-3] [-4] [-5] [-6] [-7 emailAddrs]\n" "\t\t [-8 DNS-names]\n" "\t\t [--extAIA] [--extSIA] [--extCP] [--extPM] [--extPC] [--extIA]\n" "\t\t [--extSKID]\n", progName); FPS "\t%s -U [-X] [-d certdir] [-P dbprefix]\n", progName); exit(1); } static void LongUsage(char *progName) { FPS "%-15s Add a certificate to the database (create if needed)\n", "-A"); FPS "%-20s\n", " All options under -E apply"); FPS "%-15s Run a series of certutil commands from a batch file\n", "-B"); FPS "%-20s Specify the batch file\n", " -i batch-file"); FPS "%-15s Add an Email certificate to the database (create if needed)\n", "-E"); FPS "%-20s Specify the nickname of the certificate to add\n", " -n cert-name"); FPS "%-20s Set the certificate trust attributes:\n", " -t trustargs"); FPS "%-25s trustargs is of the form x,y,z where x is for SSL, y is for S/MIME,\n", ""); FPS "%-25s and z is for code signing\n", ""); FPS "%-25s p \t valid peer\n", ""); FPS "%-25s P \t trusted peer (implies p)\n", ""); FPS "%-25s c \t valid CA\n", ""); FPS "%-25s T \t trusted CA to issue client certs (implies c)\n", ""); FPS "%-25s C \t trusted CA to issue server certs (implies c)\n", ""); FPS "%-25s u \t user cert\n", ""); FPS "%-25s w \t send warning\n", ""); FPS "%-25s g \t make step-up cert\n", ""); FPS "%-20s Specify the password file\n", " -f pwfile"); FPS "%-20s Cert database directory (default is ~/.netscape)\n", " -d certdir"); FPS "%-20s Cert & Key database prefix\n", " -P dbprefix"); FPS "%-20s The input certificate is encoded in ASCII (RFC1113)\n", " -a"); FPS "%-20s Specify the certificate file (default is stdin)\n", " -i input"); FPS "\n"); FPS "%-15s Create a new binary certificate from a BINARY cert request\n", "-C"); FPS "%-20s The nickname of the issuer cert\n", " -c issuer-name"); FPS "%-20s The BINARY certificate request file\n", " -i cert-request "); FPS "%-20s Output binary cert to this file (default is stdout)\n", " -o output-cert"); FPS "%-20s Self sign\n", " -x"); FPS "%-20s Cert serial number\n", " -m serial-number"); FPS "%-20s Time Warp\n", " -w warp-months"); FPS "%-20s Months valid (default is 3)\n", " -v months-valid"); FPS "%-20s Specify the password file\n", " -f pwfile"); FPS "%-20s Cert database directory (default is ~/.netscape)\n", " -d certdir"); FPS "%-20s Cert & Key database prefix\n", " -P dbprefix"); FPS "%-20s \n" "%-20s Create key usage extension. Possible keywords:\n" "%-20s \"digitalSignature\", \"nonRepudiation\", \"keyEncipherment\",\n" "%-20s \"dataEncipherment\", \"keyAgreement\", \"certSigning\",\n" "%-20s \"crlSigning\", \"critical\"\n", " -1 | --keyUsage keyword,keyword,...", "", "", "", ""); FPS "%-20s Create basic constraint extension\n", " -2 "); FPS "%-20s Create authority key ID extension\n", " -3 "); FPS "%-20s Create crl distribution point extension\n", " -4 "); FPS "%-20s \n" "%-20s Create netscape cert type extension. Possible keywords:\n" "%-20s \"sslClient\", \"sslServer\", \"smime\", \"objectSigning\",\n" "%-20s \"sslCA\", \"smimeCA\", \"objectSigningCA\", \"critical\".\n", " -5 | -nsCertType keyword,keyword,... ", "", "", ""); FPS "%-20s \n" "%-20s Create extended key usage extension. Possible keywords:\n" "%-20s \"serverAuth\", \"clientAuth\",\"codeSigning\",\n" "%-20s \"emailProtection\", \"timeStamp\",\"ocspResponder\",\n" "%-20s \"stepUp\", \"critical\"\n", " -6 | --extKeyUsage keyword,keyword,...", "", "", "", ""); FPS "%-20s Create an email subject alt name extension\n", " -7 emailAddrs"); FPS "%-20s Create an dns subject alt name extension\n", " -8 dnsNames"); FPS "%-20s The input certificate request is encoded in ASCII (RFC1113)\n", " -a"); FPS "\n"); FPS "%-15s Generate a new key pair\n", "-G"); FPS "%-20s Name of token in which to generate key (default is internal)\n", " -h token-name"); #ifdef NSS_ENABLE_ECC FPS "%-20s Type of key pair to generate (\"dsa\", \"ec\", \"rsa\" (default))\n", " -k key-type"); FPS "%-20s Key size in bits, (min %d, max %d, default %d) (not for ec)\n", " -g key-size", MIN_KEY_BITS, MAX_KEY_BITS, DEFAULT_KEY_BITS); #else FPS "%-20s Type of key pair to generate (\"dsa\", \"rsa\" (default))\n", " -k key-type"); FPS "%-20s Key size in bits, (min %d, max %d, default %d)\n", " -g key-size", MIN_KEY_BITS, MAX_KEY_BITS, DEFAULT_KEY_BITS); #endif /* NSS_ENABLE_ECC */ FPS "%-20s Set the public exponent value (3, 17, 65537) (rsa only)\n", " -y exp"); FPS "%-20s Specify the password file\n", " -f password-file"); FPS "%-20s Specify the noise file to be used\n", " -z noisefile"); FPS "%-20s read PQG value from pqgfile (dsa only)\n", " -q pqgfile"); #ifdef NSS_ENABLE_ECC FPS "%-20s Elliptic curve name (ec only)\n", " -q curve-name"); FPS "%-20s One of nistp256, nistp384, nistp521\n", ""); #ifdef NSS_ECC_MORE_THAN_SUITE_B FPS "%-20s sect163k1, nistk163, sect163r1, sect163r2,\n", ""); FPS "%-20s nistb163, sect193r1, sect193r2, sect233k1, nistk233,\n", ""); FPS "%-20s sect233r1, nistb233, sect239k1, sect283k1, nistk283,\n", ""); FPS "%-20s sect283r1, nistb283, sect409k1, nistk409, sect409r1,\n", ""); FPS "%-20s nistb409, sect571k1, nistk571, sect571r1, nistb571,\n", ""); FPS "%-20s secp160k1, secp160r1, secp160r2, secp192k1, secp192r1,\n", ""); FPS "%-20s nistp192, secp224k1, secp224r1, nistp224, secp256k1,\n", ""); FPS "%-20s secp256r1, secp384r1, secp521r1,\n", ""); FPS "%-20s prime192v1, prime192v2, prime192v3, \n", ""); FPS "%-20s prime239v1, prime239v2, prime239v3, c2pnb163v1, \n", ""); FPS "%-20s c2pnb163v2, c2pnb163v3, c2pnb176v1, c2tnb191v1, \n", ""); FPS "%-20s c2tnb191v2, c2tnb191v3, \n", ""); FPS "%-20s c2pnb208w1, c2tnb239v1, c2tnb239v2, c2tnb239v3, \n", ""); FPS "%-20s c2pnb272w1, c2pnb304w1, \n", ""); FPS "%-20s c2tnb359w1, c2pnb368w1, c2tnb431r1, secp112r1, \n", ""); FPS "%-20s secp112r2, secp128r1, secp128r2, sect113r1, sect113r2\n", ""); FPS "%-20s sect131r1, sect131r2\n", ""); #endif /* NSS_ECC_MORE_THAN_SUITE_B */ #endif FPS "%-20s Key database directory (default is ~/.netscape)\n", " -d keydir"); FPS "%-20s Cert & Key database prefix\n", " -P dbprefix"); FPS "\n"); FPS "%-15s Delete a certificate from the database\n", "-D"); FPS "%-20s The nickname of the cert to delete\n", " -n cert-name"); FPS "%-20s Cert database directory (default is ~/.netscape)\n", " -d certdir"); FPS "%-20s Cert & Key database prefix\n", " -P dbprefix"); FPS "\n"); FPS "%-15s List all modules\n", /*, or print out a single named module\n",*/ "-U"); FPS "%-20s Module database directory (default is '~/.netscape')\n", " -d moddir"); FPS "%-20s Cert & Key database prefix\n", " -P dbprefix"); FPS "%-20s force the database to open R/W\n", " -X"); FPS "\n"); FPS "%-15s List all private keys\n", "-K"); FPS "%-20s Name of token to search (\"all\" for all tokens)\n", " -h token-name "); FPS "%-20s Key type (\"all\" (default), \"dsa\"," #ifdef NSS_ENABLE_ECC " \"ec\"," #endif " \"rsa\")\n", " -k key-type"); FPS "%-20s The nickname of the key or associated certificate\n", " -n name"); FPS "%-20s Specify the password file\n", " -f password-file"); FPS "%-20s Key database directory (default is ~/.netscape)\n", " -d keydir"); FPS "%-20s Cert & Key database prefix\n", " -P dbprefix"); FPS "%-20s force the database to open R/W\n", " -X"); FPS "\n"); FPS "%-15s List all certs, or print out a single named cert\n", "-L"); FPS "%-20s Pretty print named cert (list all if unspecified)\n", " -n cert-name"); FPS "%-20s Cert database directory (default is ~/.netscape)\n", " -d certdir"); FPS "%-20s Cert & Key database prefix\n", " -P dbprefix"); FPS "%-20s force the database to open R/W\n", " -X"); FPS "%-20s For single cert, print binary DER encoding\n", " -r"); FPS "%-20s For single cert, print ASCII encoding (RFC1113)\n", " -a"); FPS "\n"); FPS "%-15s Modify trust attributes of certificate\n", "-M"); FPS "%-20s The nickname of the cert to modify\n", " -n cert-name"); FPS "%-20s Set the certificate trust attributes (see -A above)\n", " -t trustargs"); FPS "%-20s Cert database directory (default is ~/.netscape)\n", " -d certdir"); FPS "%-20s Cert & Key database prefix\n", " -P dbprefix"); FPS "\n"); FPS "%-15s Create a new certificate database\n", "-N"); FPS "%-20s Cert database directory (default is ~/.netscape)\n", " -d certdir"); FPS "%-20s Cert & Key database prefix\n", " -P dbprefix"); FPS "\n"); FPS "%-15s Reset the Key database or token\n", "-T"); FPS "%-20s Cert database directory (default is ~/.netscape)\n", " -d certdir"); FPS "%-20s Cert & Key database prefix\n", " -P dbprefix"); FPS "%-20s Token to reset (default is internal)\n", " -h token-name"); FPS "%-20s Set token's Site Security Officer password\n", " -0 SSO-password"); FPS "\n"); FPS "\n"); FPS "%-15s Print the chain of a certificate\n", "-O"); FPS "%-20s The nickname of the cert to modify\n", " -n cert-name"); FPS "%-20s Cert database directory (default is ~/.netscape)\n", " -d certdir"); FPS "%-20s Cert & Key database prefix\n", " -P dbprefix"); FPS "%-20s force the database to open R/W\n", " -X"); FPS "\n"); FPS "%-15s Generate a certificate request (stdout)\n", "-R"); FPS "%-20s Specify the subject name (using RFC1485)\n", " -s subject"); FPS "%-20s Output the cert request to this file\n", " -o output-req"); #ifdef NSS_ENABLE_ECC FPS "%-20s Type of key pair to generate (\"dsa\", \"ec\", \"rsa\" (default))\n", #else FPS "%-20s Type of key pair to generate (\"dsa\", \"rsa\" (default))\n", #endif /* NSS_ENABLE_ECC */ " -k key-type-or-id"); FPS "%-20s or nickname of the cert key to use \n", ""); FPS "%-20s Name of token in which to generate key (default is internal)\n", " -h token-name"); FPS "%-20s Key size in bits, RSA keys only (min %d, max %d, default %d)\n", " -g key-size", MIN_KEY_BITS, MAX_KEY_BITS, DEFAULT_KEY_BITS); FPS "%-20s Name of file containing PQG parameters (dsa only)\n", " -q pqgfile"); #ifdef NSS_ENABLE_ECC FPS "%-20s Elliptic curve name (ec only)\n", " -q curve-name"); FPS "%-20s See the \"-G\" option for a full list of supported names.\n", ""); #endif /* NSS_ENABLE_ECC */ FPS "%-20s Specify the password file\n", " -f pwfile"); FPS "%-20s Key database directory (default is ~/.netscape)\n", " -d keydir"); FPS "%-20s Cert & Key database prefix\n", " -P dbprefix"); FPS "%-20s Specify the contact phone number (\"123-456-7890\")\n", " -p phone"); FPS "%-20s Output the cert request in ASCII (RFC1113); default is binary\n", " -a"); FPS "%-20s \n", " See -S for available extension options"); FPS "\n"); FPS "%-15s Validate a certificate\n", "-V"); FPS "%-20s The nickname of the cert to Validate\n", " -n cert-name"); FPS "%-20s validity time (\"YYMMDDHHMMSS[+HHMM|-HHMM|Z]\")\n", " -b time"); FPS "%-20s Check certificate signature \n", " -e "); FPS "%-20s Specify certificate usage:\n", " -u certusage"); FPS "%-25s C \t SSL Client\n", ""); FPS "%-25s V \t SSL Server\n", ""); FPS "%-25s S \t Email signer\n", ""); FPS "%-25s R \t Email Recipient\n", ""); FPS "%-25s O \t OCSP status responder\n", ""); FPS "%-25s J \t Object signer\n", ""); FPS "%-20s Cert database directory (default is ~/.netscape)\n", " -d certdir"); FPS "%-20s Cert & Key database prefix\n", " -P dbprefix"); FPS "%-20s force the database to open R/W\n", " -X"); FPS "\n"); FPS "%-15s Upgrade an old database and merge it into a new one\n", "--upgrade-merge"); FPS "%-20s Cert database directory to merge into (default is ~/.netscape)\n", " -d certdir"); FPS "%-20s Cert & Key database prefix of the target database\n", " -P dbprefix"); FPS "%-20s Specify the password file for the target database\n", " -f pwfile"); FPS "%-20s \n%-20s Cert database directory to upgrade from\n", " --source-dir certdir", ""); FPS "%-20s \n%-20s Cert & Key database prefix of the upgrade database\n", " --soruce-prefix dbprefix", ""); FPS "%-20s \n%-20s Unique identifier for the upgrade database\n", " --upgrade-id uniqueID", ""); FPS "%-20s \n%-20s Name of the token while it is in upgrade state\n", " --upgrade-token-name name", ""); FPS "%-20s Specify the password file for the upgrade database\n", " -@ pwfile"); FPS "\n"); FPS "%-15s Merge source database into the target database\n", "--merge"); FPS "%-20s Cert database directory of target (default is ~/.netscape)\n", " -d certdir"); FPS "%-20s Cert & Key database prefix of the target database\n", " -P dbprefix"); FPS "%-20s Specify the password file for the target database\n", " -f pwfile"); FPS "%-20s \n%-20s Cert database directory of the source database\n", " --source-dir certdir", ""); FPS "%-20s \n%-20s Cert & Key database prefix of the source database\n", " --source-prefix dbprefix", ""); FPS "%-20s Specify the password file for the source database\n", " -@ pwfile"); FPS "\n"); FPS "%-15s Make a certificate and add to database\n", "-S"); FPS "%-20s Specify the nickname of the cert\n", " -n key-name"); FPS "%-20s Specify the subject name (using RFC1485)\n", " -s subject"); FPS "%-20s The nickname of the issuer cert\n", " -c issuer-name"); FPS "%-20s Set the certificate trust attributes (see -A above)\n", " -t trustargs"); #ifdef NSS_ENABLE_ECC FPS "%-20s Type of key pair to generate (\"dsa\", \"ec\", \"rsa\" (default))\n", #else FPS "%-20s Type of key pair to generate (\"dsa\", \"rsa\" (default))\n", #endif /* NSS_ENABLE_ECC */ " -k key-type-or-id"); FPS "%-20s Name of token in which to generate key (default is internal)\n", " -h token-name"); FPS "%-20s Key size in bits, RSA keys only (min %d, max %d, default %d)\n", " -g key-size", MIN_KEY_BITS, MAX_KEY_BITS, DEFAULT_KEY_BITS); FPS "%-20s Name of file containing PQG parameters (dsa only)\n", " -q pqgfile"); #ifdef NSS_ENABLE_ECC FPS "%-20s Elliptic curve name (ec only)\n", " -q curve-name"); FPS "%-20s See the \"-G\" option for a full list of supported names.\n", ""); #endif /* NSS_ENABLE_ECC */ FPS "%-20s Self sign\n", " -x"); FPS "%-20s Cert serial number\n", " -m serial-number"); FPS "%-20s Time Warp\n", " -w warp-months"); FPS "%-20s Months valid (default is 3)\n", " -v months-valid"); FPS "%-20s Specify the password file\n", " -f pwfile"); FPS "%-20s Cert database directory (default is ~/.netscape)\n", " -d certdir"); FPS "%-20s Cert & Key database prefix\n", " -P dbprefix"); FPS "%-20s Specify the contact phone number (\"123-456-7890\")\n", " -p phone"); FPS "%-20s Create key usage extension\n", " -1 "); FPS "%-20s Create basic constraint extension\n", " -2 "); FPS "%-20s Create authority key ID extension\n", " -3 "); FPS "%-20s Create crl distribution point extension\n", " -4 "); FPS "%-20s Create netscape cert type extension\n", " -5 "); FPS "%-20s Create extended key usage extension\n", " -6 "); FPS "%-20s Create an email subject alt name extension\n", " -7 emailAddrs "); FPS "%-20s Create a DNS subject alt name extension\n", " -8 DNS-names"); FPS "%-20s Create an Authority Information Access extension\n", " --extAIA "); FPS "%-20s Create a Subject Information Access extension\n", " --extSIA "); FPS "%-20s Create a Certificate Policies extension\n", " --extCP "); FPS "%-20s Create a Policy Mappings extension\n", " --extPM "); FPS "%-20s Create a Policy Constraints extension\n", " --extPC "); FPS "%-20s Create an Inhibit Any Policy extension\n", " --extIA "); FPS "%-20s Create a subject key ID extension\n", " --extSKID "); FPS "\n"); exit(1); #undef FPS } static CERTCertificate * MakeV1Cert( CERTCertDBHandle * handle, CERTCertificateRequest *req, char * issuerNickName, PRBool selfsign, unsigned int serialNumber, int warpmonths, int validityMonths) { CERTCertificate *issuerCert = NULL; CERTValidity *validity; CERTCertificate *cert = NULL; PRExplodedTime printableTime; PRTime now, after; if ( !selfsign ) { issuerCert = CERT_FindCertByNicknameOrEmailAddr(handle, issuerNickName); if (!issuerCert) { SECU_PrintError(progName, "could not find certificate named \"%s\"", issuerNickName); return NULL; } } now = PR_Now(); PR_ExplodeTime (now, PR_GMTParameters, &printableTime); if ( warpmonths ) { printableTime.tm_month += warpmonths; now = PR_ImplodeTime (&printableTime); PR_ExplodeTime (now, PR_GMTParameters, &printableTime); } printableTime.tm_month += validityMonths; after = PR_ImplodeTime (&printableTime); /* note that the time is now in micro-second unit */ validity = CERT_CreateValidity (now, after); if (validity) { cert = CERT_CreateCertificate(serialNumber, (selfsign ? &req->subject : &issuerCert->subject), validity, req); CERT_DestroyValidity(validity); } if ( issuerCert ) { CERT_DestroyCertificate (issuerCert); } return(cert); } static SECItem * SignCert(CERTCertDBHandle *handle, CERTCertificate *cert, PRBool selfsign, SECOidTag hashAlgTag, SECKEYPrivateKey *privKey, char *issuerNickName, void *pwarg) { SECItem der; SECItem *result = NULL; SECKEYPrivateKey *caPrivateKey = NULL; SECStatus rv; PRArenaPool *arena; SECOidTag algID; void *dummy; if( !selfsign ) { CERTCertificate *issuer = PK11_FindCertFromNickname(issuerNickName, pwarg); if( (CERTCertificate *)NULL == issuer ) { SECU_PrintError(progName, "unable to find issuer with nickname %s", issuerNickName); return (SECItem *)NULL; } privKey = caPrivateKey = PK11_FindKeyByAnyCert(issuer, pwarg); CERT_DestroyCertificate(issuer); if (caPrivateKey == NULL) { SECU_PrintError(progName, "unable to retrieve key %s", issuerNickName); return NULL; } } arena = cert->arena; algID = SEC_GetSignatureAlgorithmOidTag(privKey->keyType, hashAlgTag); if (algID == SEC_OID_UNKNOWN) { fprintf(stderr, "Unknown key or hash type for issuer."); goto done; } rv = SECOID_SetAlgorithmID(arena, &cert->signature, algID, 0); if (rv != SECSuccess) { fprintf(stderr, "Could not set signature algorithm id."); goto done; } /* we only deal with cert v3 here */ *(cert->version.data) = 2; cert->version.len = 1; der.len = 0; der.data = NULL; dummy = SEC_ASN1EncodeItem (arena, &der, cert, SEC_ASN1_GET(CERT_CertificateTemplate)); if (!dummy) { fprintf (stderr, "Could not encode certificate.\n"); goto done; } result = (SECItem *) PORT_ArenaZAlloc (arena, sizeof (SECItem)); if (result == NULL) { fprintf (stderr, "Could not allocate item for certificate data.\n"); goto done; } rv = SEC_DerSignData(arena, result, der.data, der.len, privKey, algID); if (rv != SECSuccess) { fprintf (stderr, "Could not sign encoded certificate data.\n"); /* result allocated out of the arena, it will be freed * when the arena is freed */ result = NULL; goto done; } cert->derCert = *result; done: if (caPrivateKey) { SECKEY_DestroyPrivateKey(caPrivateKey); } return result; } static SECStatus CreateCert( CERTCertDBHandle *handle, PK11SlotInfo *slot, char * issuerNickName, PRFileDesc *inFile, PRFileDesc *outFile, SECKEYPrivateKey **selfsignprivkey, void *pwarg, SECOidTag hashAlgTag, unsigned int serialNumber, int warpmonths, int validityMonths, const char *emailAddrs, const char *dnsNames, PRBool ascii, PRBool selfsign, certutilExtnList extnList) { void * extHandle; SECItem * certDER; CERTCertificate *subjectCert = NULL; CERTCertificateRequest *certReq = NULL; SECStatus rv = SECSuccess; SECItem reqDER; CERTCertExtension **CRexts; reqDER.data = NULL; do { /* Create a certrequest object from the input cert request der */ certReq = GetCertRequest(inFile, ascii); if (certReq == NULL) { GEN_BREAK (SECFailure) } subjectCert = MakeV1Cert (handle, certReq, issuerNickName, selfsign, serialNumber, warpmonths, validityMonths); if (subjectCert == NULL) { GEN_BREAK (SECFailure) } extHandle = CERT_StartCertExtensions (subjectCert); if (extHandle == NULL) { GEN_BREAK (SECFailure) } rv = AddExtensions(extHandle, emailAddrs, dnsNames, extnList); if (rv != SECSuccess) { GEN_BREAK (SECFailure) } if (certReq->attributes != NULL && certReq->attributes[0] != NULL && certReq->attributes[0]->attrType.data != NULL && certReq->attributes[0]->attrType.len > 0 && SECOID_FindOIDTag(&certReq->attributes[0]->attrType) == SEC_OID_PKCS9_EXTENSION_REQUEST) { rv = CERT_GetCertificateRequestExtensions(certReq, &CRexts); if (rv != SECSuccess) break; rv = CERT_MergeExtensions(extHandle, CRexts); if (rv != SECSuccess) break; } CERT_FinishExtensions(extHandle); /* self-signing a cert request, find the private key */ if (selfsign && *selfsignprivkey == NULL) { *selfsignprivkey = PK11_FindKeyByDERCert(slot, subjectCert, pwarg); if (!*selfsignprivkey) { fprintf(stderr, "Failed to locate private key.\n"); rv = SECFailure; break; } } certDER = SignCert(handle, subjectCert, selfsign, hashAlgTag, *selfsignprivkey, issuerNickName,pwarg); if (certDER) { if (ascii) { PR_fprintf(outFile, "%s\n%s\n%s\n", NS_CERT_HEADER, BTOA_DataToAscii(certDER->data, certDER->len), NS_CERT_TRAILER); } else { PR_Write(outFile, certDER->data, certDER->len); } } } while (0); CERT_DestroyCertificateRequest (certReq); CERT_DestroyCertificate (subjectCert); if (rv != SECSuccess) { PRErrorCode perr = PR_GetError(); fprintf(stderr, "%s: unable to create cert (%s)\n", progName, SECU_Strerror(perr)); } return (rv); } /* * map a class to a user presentable string */ static const char *objClassArray[] = { "Data", "Certificate", "Public Key", "Private Key", "Secret Key", "Hardware Feature", "Domain Parameters", "Mechanism" }; static const char *objNSSClassArray[] = { "CKO_NSS", "Crl", "SMIME Record", "Trust", "Builtin Root List" }; const char * getObjectClass(CK_ULONG classType) { static char buf[sizeof(CK_ULONG)*2+3]; if (classType <= CKO_MECHANISM) { return objClassArray[classType]; } if (classType >= CKO_NSS && classType <= CKO_NSS_BUILTIN_ROOT_LIST) { return objNSSClassArray[classType - CKO_NSS]; } sprintf(buf, "0x%lx", classType); return buf; } char *mkNickname(unsigned char *data, int len) { char *nick = PORT_Alloc(len+1); if (!nick) { return nick; } PORT_Memcpy(nick, data, len); nick[len] = 0; return nick; } /* * dump a PK11_MergeTokens error log to the console */ void DumpMergeLog(const char *progname, PK11MergeLog *log) { PK11MergeLogNode *node; for (node = log->head; node; node = node->next) { SECItem attrItem; char *nickname = NULL; const char *objectClass = NULL; SECStatus rv; attrItem.data = NULL; rv = PK11_ReadRawAttribute(PK11_TypeGeneric, node->object, CKA_LABEL, &attrItem); if (rv == SECSuccess) { nickname = mkNickname(attrItem.data, attrItem.len); PORT_Free(attrItem.data); } attrItem.data = NULL; rv = PK11_ReadRawAttribute(PK11_TypeGeneric, node->object, CKA_CLASS, &attrItem); if (rv == SECSuccess) { if (attrItem.len == sizeof(CK_ULONG)) { objectClass = getObjectClass(*(CK_ULONG *)attrItem.data); } PORT_Free(attrItem.data); } fprintf(stderr, "%s: Could not merge object %s (type %s): %s\n", progName, nickname ? nickname : "unnamed", objectClass ? objectClass : "unknown", SECU_Strerror(node->error)); if (nickname) { PORT_Free(nickname); } } } /* Certutil commands */ enum { cmd_AddCert = 0, cmd_CreateNewCert, cmd_DeleteCert, cmd_AddEmailCert, cmd_DeleteKey, cmd_GenKeyPair, cmd_PrintHelp, cmd_ListKeys, cmd_ListCerts, cmd_ModifyCertTrust, cmd_NewDBs, cmd_DumpChain, cmd_CertReq, cmd_CreateAndAddCert, cmd_TokenReset, cmd_ListModules, cmd_CheckCertValidity, cmd_ChangePassword, cmd_Version, cmd_Batch, cmd_Merge, cmd_UpgradeMerge /* test only */ }; /* Certutil options */ enum certutilOpts { opt_SSOPass = 0, opt_AddKeyUsageExt, opt_AddBasicConstraintExt, opt_AddAuthorityKeyIDExt, opt_AddCRLDistPtsExt, opt_AddNSCertTypeExt, opt_AddExtKeyUsageExt, opt_ExtendedEmailAddrs, opt_ExtendedDNSNames, opt_ASCIIForIO, opt_ValidityTime, opt_IssuerName, opt_CertDir, opt_VerifySig, opt_PasswordFile, opt_KeySize, opt_TokenName, opt_InputFile, opt_KeyIndex, opt_KeyType, opt_DetailedInfo, opt_SerialNumber, opt_Nickname, opt_OutputFile, opt_PhoneNumber, opt_DBPrefix, opt_PQGFile, opt_BinaryDER, opt_Subject, opt_Trust, opt_Usage, opt_Validity, opt_OffsetMonths, opt_SelfSign, opt_RW, opt_Exponent, opt_NoiseFile, opt_Hash, opt_NewPasswordFile, opt_AddAuthInfoAccExt, opt_AddSubjInfoAccExt, opt_AddCertPoliciesExt, opt_AddPolicyMapExt, opt_AddPolicyConstrExt, opt_AddInhibAnyExt, opt_AddSubjectKeyIDExt, opt_AddCmdKeyUsageExt, opt_AddCmdNSCertTypeExt, opt_AddCmdExtKeyUsageExt, opt_SourceDir, opt_SourcePrefix, opt_UpgradeID, opt_UpgradeTokenName }; static const secuCommandFlag commands_init[] = { { /* cmd_AddCert */ 'A', PR_FALSE, 0, PR_FALSE }, { /* cmd_CreateNewCert */ 'C', PR_FALSE, 0, PR_FALSE }, { /* cmd_DeleteCert */ 'D', PR_FALSE, 0, PR_FALSE }, { /* cmd_AddEmailCert */ 'E', PR_FALSE, 0, PR_FALSE }, { /* cmd_DeleteKey */ 'F', PR_FALSE, 0, PR_FALSE }, { /* cmd_GenKeyPair */ 'G', PR_FALSE, 0, PR_FALSE }, { /* cmd_PrintHelp */ 'H', PR_FALSE, 0, PR_FALSE }, { /* cmd_ListKeys */ 'K', PR_FALSE, 0, PR_FALSE }, { /* cmd_ListCerts */ 'L', PR_FALSE, 0, PR_FALSE }, { /* cmd_ModifyCertTrust */ 'M', PR_FALSE, 0, PR_FALSE }, { /* cmd_NewDBs */ 'N', PR_FALSE, 0, PR_FALSE }, { /* cmd_DumpChain */ 'O', PR_FALSE, 0, PR_FALSE }, { /* cmd_CertReq */ 'R', PR_FALSE, 0, PR_FALSE }, { /* cmd_CreateAndAddCert */ 'S', PR_FALSE, 0, PR_FALSE }, { /* cmd_TokenReset */ 'T', PR_FALSE, 0, PR_FALSE }, { /* cmd_ListModules */ 'U', PR_FALSE, 0, PR_FALSE }, { /* cmd_CheckCertValidity */ 'V', PR_FALSE, 0, PR_FALSE }, { /* cmd_ChangePassword */ 'W', PR_FALSE, 0, PR_FALSE }, { /* cmd_Version */ 'Y', PR_FALSE, 0, PR_FALSE }, { /* cmd_Batch */ 'B', PR_FALSE, 0, PR_FALSE }, { /* cmd_Merge */ 0, PR_FALSE, 0, PR_FALSE, "merge" }, { /* cmd_UpgradeMerge */ 0, PR_FALSE, 0, PR_FALSE, "upgrade-merge" } }; #define NUM_COMMANDS ((sizeof commands_init) / (sizeof commands_init[0])) static const secuCommandFlag options_init[] = { { /* opt_SSOPass */ '0', PR_TRUE, 0, PR_FALSE }, { /* opt_AddKeyUsageExt */ '1', PR_FALSE, 0, PR_FALSE }, { /* opt_AddBasicConstraintExt*/ '2', PR_FALSE, 0, PR_FALSE }, { /* opt_AddAuthorityKeyIDExt*/ '3', PR_FALSE, 0, PR_FALSE }, { /* opt_AddCRLDistPtsExt */ '4', PR_FALSE, 0, PR_FALSE }, { /* opt_AddNSCertTypeExt */ '5', PR_FALSE, 0, PR_FALSE }, { /* opt_AddExtKeyUsageExt */ '6', PR_FALSE, 0, PR_FALSE }, { /* opt_ExtendedEmailAddrs */ '7', PR_TRUE, 0, PR_FALSE }, { /* opt_ExtendedDNSNames */ '8', PR_TRUE, 0, PR_FALSE }, { /* opt_ASCIIForIO */ 'a', PR_FALSE, 0, PR_FALSE }, { /* opt_ValidityTime */ 'b', PR_TRUE, 0, PR_FALSE }, { /* opt_IssuerName */ 'c', PR_TRUE, 0, PR_FALSE }, { /* opt_CertDir */ 'd', PR_TRUE, 0, PR_FALSE }, { /* opt_VerifySig */ 'e', PR_FALSE, 0, PR_FALSE }, { /* opt_PasswordFile */ 'f', PR_TRUE, 0, PR_FALSE }, { /* opt_KeySize */ 'g', PR_TRUE, 0, PR_FALSE }, { /* opt_TokenName */ 'h', PR_TRUE, 0, PR_FALSE }, { /* opt_InputFile */ 'i', PR_TRUE, 0, PR_FALSE }, { /* opt_KeyIndex */ 'j', PR_TRUE, 0, PR_FALSE }, { /* opt_KeyType */ 'k', PR_TRUE, 0, PR_FALSE }, { /* opt_DetailedInfo */ 'l', PR_FALSE, 0, PR_FALSE }, { /* opt_SerialNumber */ 'm', PR_TRUE, 0, PR_FALSE }, { /* opt_Nickname */ 'n', PR_TRUE, 0, PR_FALSE }, { /* opt_OutputFile */ 'o', PR_TRUE, 0, PR_FALSE }, { /* opt_PhoneNumber */ 'p', PR_TRUE, 0, PR_FALSE }, { /* opt_DBPrefix */ 'P', PR_TRUE, 0, PR_FALSE }, { /* opt_PQGFile */ 'q', PR_TRUE, 0, PR_FALSE }, { /* opt_BinaryDER */ 'r', PR_FALSE, 0, PR_FALSE }, { /* opt_Subject */ 's', PR_TRUE, 0, PR_FALSE }, { /* opt_Trust */ 't', PR_TRUE, 0, PR_FALSE }, { /* opt_Usage */ 'u', PR_TRUE, 0, PR_FALSE }, { /* opt_Validity */ 'v', PR_TRUE, 0, PR_FALSE }, { /* opt_OffsetMonths */ 'w', PR_TRUE, 0, PR_FALSE }, { /* opt_SelfSign */ 'x', PR_FALSE, 0, PR_FALSE }, { /* opt_RW */ 'X', PR_FALSE, 0, PR_FALSE }, { /* opt_Exponent */ 'y', PR_TRUE, 0, PR_FALSE }, { /* opt_NoiseFile */ 'z', PR_TRUE, 0, PR_FALSE }, { /* opt_Hash */ 'Z', PR_TRUE, 0, PR_FALSE }, { /* opt_NewPasswordFile */ '@', PR_TRUE, 0, PR_FALSE }, { /* opt_AddAuthInfoAccExt */ 0, PR_FALSE, 0, PR_FALSE, "extAIA" }, { /* opt_AddSubjInfoAccExt */ 0, PR_FALSE, 0, PR_FALSE, "extSIA" }, { /* opt_AddCertPoliciesExt */ 0, PR_FALSE, 0, PR_FALSE, "extCP" }, { /* opt_AddPolicyMapExt */ 0, PR_FALSE, 0, PR_FALSE, "extPM" }, { /* opt_AddPolicyConstrExt */ 0, PR_FALSE, 0, PR_FALSE, "extPC" }, { /* opt_AddInhibAnyExt */ 0, PR_FALSE, 0, PR_FALSE, "extIA" }, { /* opt_AddSubjectKeyIDExt */ 0, PR_FALSE, 0, PR_FALSE, "extSKID" }, { /* opt_AddCmdKeyUsageExt */ 0, PR_TRUE, 0, PR_FALSE, "keyUsage" }, { /* opt_AddCmdNSCertTypeExt */ 0, PR_TRUE, 0, PR_FALSE, "nsCertType" }, { /* opt_AddCmdExtKeyUsageExt*/ 0, PR_TRUE, 0, PR_FALSE, "extKeyUsage" }, { /* opt_SourceDir */ 0, PR_TRUE, 0, PR_FALSE, "source-dir"}, { /* opt_SourcePrefix */ 0, PR_TRUE, 0, PR_FALSE, "source-prefix"}, { /* opt_UpgradeID */ 0, PR_TRUE, 0, PR_FALSE, "upgrade-id"}, { /* opt_UpgradeTokenName */ 0, PR_TRUE, 0, PR_FALSE, "upgrade-token-name"}, }; #define NUM_OPTIONS ((sizeof options_init) / (sizeof options_init[0])) static secuCommandFlag certutil_commands[NUM_COMMANDS]; static secuCommandFlag certutil_options [NUM_OPTIONS ]; static const secuCommand certutil = { NUM_COMMANDS, NUM_OPTIONS, certutil_commands, certutil_options }; static certutilExtnList certutil_extns; static int certutil_main(int argc, char **argv, PRBool initialize) { CERTCertDBHandle *certHandle; PK11SlotInfo *slot = NULL; CERTName * subject = 0; PRFileDesc *inFile = PR_STDIN; PRFileDesc *outFile = NULL; char * certfile = "tempcert"; char * certreqfile = "tempcertreq"; char * slotname = "internal"; char * certPrefix = ""; char * sourceDir = ""; char * srcCertPrefix = ""; char * upgradeID = ""; char * upgradeTokenName = ""; KeyType keytype = rsaKey; char * name = NULL; char * keysource = NULL; SECOidTag hashAlgTag = SEC_OID_UNKNOWN; int keysize = DEFAULT_KEY_BITS; int publicExponent = 0x010001; unsigned int serialNumber = 0; int warpmonths = 0; int validityMonths = 3; int commandsEntered = 0; char commandToRun = '\0'; secuPWData pwdata = { PW_NONE, 0 }; secuPWData pwdata2 = { PW_NONE, 0 }; PRBool readOnly = PR_FALSE; PRBool initialized = PR_FALSE; SECKEYPrivateKey *privkey = NULL; SECKEYPublicKey *pubkey = NULL; int i; SECStatus rv; progName = PORT_Strrchr(argv[0], '/'); progName = progName ? progName+1 : argv[0]; memcpy(certutil_commands, commands_init, sizeof commands_init); memcpy(certutil_options, options_init, sizeof options_init); rv = SECU_ParseCommandLine(argc, argv, progName, &certutil); if (rv != SECSuccess) Usage(progName); if (certutil.commands[cmd_PrintHelp].activated) LongUsage(progName); if (certutil.options[opt_PasswordFile].arg) { pwdata.source = PW_FROMFILE; pwdata.data = certutil.options[opt_PasswordFile].arg; } if (certutil.options[opt_NewPasswordFile].arg) { pwdata2.source = PW_FROMFILE; pwdata2.data = certutil.options[opt_NewPasswordFile].arg; } if (certutil.options[opt_CertDir].activated) SECU_ConfigDirectory(certutil.options[opt_CertDir].arg); if (certutil.options[opt_SourceDir].activated) sourceDir = certutil.options[opt_SourceDir].arg; if (certutil.options[opt_UpgradeID].activated) upgradeID = certutil.options[opt_UpgradeID].arg; if (certutil.options[opt_UpgradeTokenName].activated) upgradeTokenName = certutil.options[opt_UpgradeTokenName].arg; if (certutil.options[opt_KeySize].activated) { keysize = PORT_Atoi(certutil.options[opt_KeySize].arg); if ((keysize < MIN_KEY_BITS) || (keysize > MAX_KEY_BITS)) { PR_fprintf(PR_STDERR, "%s -g: Keysize must be between %d and %d.\n", progName, MIN_KEY_BITS, MAX_KEY_BITS); return 255; } #ifdef NSS_ENABLE_ECC if (keytype == ecKey) { PR_fprintf(PR_STDERR, "%s -g: Not for ec keys.\n", progName); return 255; } #endif /* NSS_ENABLE_ECC */ } /* -h specify token name */ if (certutil.options[opt_TokenName].activated) { if (PL_strcmp(certutil.options[opt_TokenName].arg, "all") == 0) slotname = NULL; else slotname = PL_strdup(certutil.options[opt_TokenName].arg); } /* -Z hash type */ if (certutil.options[opt_Hash].activated) { char * arg = certutil.options[opt_Hash].arg; hashAlgTag = SECU_StringToSignatureAlgTag(arg); if (hashAlgTag == SEC_OID_UNKNOWN) { PR_fprintf(PR_STDERR, "%s -Z: %s is not a recognized type.\n", progName, arg); return 255; } } /* -k key type */ if (certutil.options[opt_KeyType].activated) { char * arg = certutil.options[opt_KeyType].arg; if (PL_strcmp(arg, "rsa") == 0) { keytype = rsaKey; } else if (PL_strcmp(arg, "dsa") == 0) { keytype = dsaKey; #ifdef NSS_ENABLE_ECC } else if (PL_strcmp(arg, "ec") == 0) { keytype = ecKey; #endif /* NSS_ENABLE_ECC */ } else if (PL_strcmp(arg, "all") == 0) { keytype = nullKey; } else { /* use an existing private/public key pair */ keysource = arg; } } else if (certutil.commands[cmd_ListKeys].activated) { keytype = nullKey; } /* -m serial number */ if (certutil.options[opt_SerialNumber].activated) { int sn = PORT_Atoi(certutil.options[opt_SerialNumber].arg); if (sn < 0) { PR_fprintf(PR_STDERR, "%s -m: %s is not a valid serial number.\n", progName, certutil.options[opt_SerialNumber].arg); return 255; } serialNumber = sn; } /* -P certdb name prefix */ if (certutil.options[opt_DBPrefix].activated) { if (certutil.options[opt_DBPrefix].arg) { certPrefix = strdup(certutil.options[opt_DBPrefix].arg); } else { Usage(progName); } } /* --source-prefix certdb name prefix */ if (certutil.options[opt_SourcePrefix].activated) { if (certutil.options[opt_SourcePrefix].arg) { srcCertPrefix = strdup(certutil.options[opt_SourcePrefix].arg); } else { Usage(progName); } } /* -q PQG file or curve name */ if (certutil.options[opt_PQGFile].activated) { #ifdef NSS_ENABLE_ECC if ((keytype != dsaKey) && (keytype != ecKey)) { PR_fprintf(PR_STDERR, "%s -q: specifies a PQG file for DSA keys" \ " (-k dsa) or a named curve for EC keys (-k ec)\n)", progName); #else /* } */ if (keytype != dsaKey) { PR_fprintf(PR_STDERR, "%s -q: PQG file is for DSA key (-k dsa).\n)", progName); #endif /* NSS_ENABLE_ECC */ return 255; } } /* -s subject name */ if (certutil.options[opt_Subject].activated) { subject = CERT_AsciiToName(certutil.options[opt_Subject].arg); if (!subject) { PR_fprintf(PR_STDERR, "%s -s: improperly formatted name: \"%s\"\n", progName, certutil.options[opt_Subject].arg); return 255; } } /* -v validity period */ if (certutil.options[opt_Validity].activated) { validityMonths = PORT_Atoi(certutil.options[opt_Validity].arg); if (validityMonths < 0) { PR_fprintf(PR_STDERR, "%s -v: incorrect validity period: \"%s\"\n", progName, certutil.options[opt_Validity].arg); return 255; } } /* -w warp months */ if (certutil.options[opt_OffsetMonths].activated) warpmonths = PORT_Atoi(certutil.options[opt_OffsetMonths].arg); /* -y public exponent (for RSA) */ if (certutil.options[opt_Exponent].activated) { publicExponent = PORT_Atoi(certutil.options[opt_Exponent].arg); if ((publicExponent != 3) && (publicExponent != 17) && (publicExponent != 65537)) { PR_fprintf(PR_STDERR, "%s -y: incorrect public exponent %d.", progName, publicExponent); PR_fprintf(PR_STDERR, "Must be 3, 17, or 65537.\n"); return 255; } } /* Check number of commands entered. */ commandsEntered = 0; for (i=0; i< certutil.numCommands; i++) { if (certutil.commands[i].activated) { commandToRun = certutil.commands[i].flag; commandsEntered++; } if (commandsEntered > 1) break; } if (commandsEntered > 1) { PR_fprintf(PR_STDERR, "%s: only one command at a time!\n", progName); PR_fprintf(PR_STDERR, "You entered: "); for (i=0; i< certutil.numCommands; i++) { if (certutil.commands[i].activated) PR_fprintf(PR_STDERR, " -%c", certutil.commands[i].flag); } PR_fprintf(PR_STDERR, "\n"); return 255; } if (commandsEntered == 0) { PR_fprintf(PR_STDERR, "%s: you must enter a command!\n", progName); Usage(progName); } if (certutil.commands[cmd_ListCerts].activated || certutil.commands[cmd_PrintHelp].activated || certutil.commands[cmd_ListKeys].activated || certutil.commands[cmd_ListModules].activated || certutil.commands[cmd_CheckCertValidity].activated || certutil.commands[cmd_Version].activated ) { readOnly = !certutil.options[opt_RW].activated; } /* -A, -D, -F, -M, -S, -V, and all require -n */ if ((certutil.commands[cmd_AddCert].activated || certutil.commands[cmd_DeleteCert].activated || certutil.commands[cmd_DeleteKey].activated || certutil.commands[cmd_DumpChain].activated || certutil.commands[cmd_ModifyCertTrust].activated || certutil.commands[cmd_CreateAndAddCert].activated || certutil.commands[cmd_CheckCertValidity].activated) && !certutil.options[opt_Nickname].activated) { PR_fprintf(PR_STDERR, "%s -%c: nickname is required for this command (-n).\n", progName, commandToRun); return 255; } /* -A, -E, -M, -S require trust */ if ((certutil.commands[cmd_AddCert].activated || certutil.commands[cmd_AddEmailCert].activated || certutil.commands[cmd_ModifyCertTrust].activated || certutil.commands[cmd_CreateAndAddCert].activated) && !certutil.options[opt_Trust].activated) { PR_fprintf(PR_STDERR, "%s -%c: trust is required for this command (-t).\n", progName, commandToRun); return 255; } /* if -L is given raw or ascii mode, it must be for only one cert. */ if (certutil.commands[cmd_ListCerts].activated && (certutil.options[opt_ASCIIForIO].activated || certutil.options[opt_BinaryDER].activated) && !certutil.options[opt_Nickname].activated) { PR_fprintf(PR_STDERR, "%s: nickname is required to dump cert in raw or ascii mode.\n", progName); return 255; } /* -L can only be in (raw || ascii). */ if (certutil.commands[cmd_ListCerts].activated && certutil.options[opt_ASCIIForIO].activated && certutil.options[opt_BinaryDER].activated) { PR_fprintf(PR_STDERR, "%s: cannot specify both -r and -a when dumping cert.\n", progName); return 255; } /* If making a cert request, need a subject. */ if ((certutil.commands[cmd_CertReq].activated || certutil.commands[cmd_CreateAndAddCert].activated) && !(certutil.options[opt_Subject].activated || keysource)) { PR_fprintf(PR_STDERR, "%s -%c: subject is required to create a cert request.\n", progName, commandToRun); return 255; } /* If making a cert, need a serial number. */ if ((certutil.commands[cmd_CreateNewCert].activated || certutil.commands[cmd_CreateAndAddCert].activated) && !certutil.options[opt_SerialNumber].activated) { /* Make a default serial number from the current time. */ PRTime now = PR_Now(); LL_USHR(now, now, 19); LL_L2UI(serialNumber, now); } /* Validation needs the usage to validate for. */ if (certutil.commands[cmd_CheckCertValidity].activated && !certutil.options[opt_Usage].activated) { PR_fprintf(PR_STDERR, "%s -V: specify a usage to validate the cert for (-u).\n", progName); return 255; } /* Upgrade/Merge needs a source database and a upgrade id. */ if (certutil.commands[cmd_UpgradeMerge].activated && !(certutil.options[opt_SourceDir].activated && certutil.options[opt_UpgradeID].activated)) { PR_fprintf(PR_STDERR, "%s --upgrade-merge: specify an upgrade database directory " "(--source-dir) and\n" " an upgrade ID (--upgrade-id).\n", progName); return 255; } /* Merge needs a source database */ if (certutil.commands[cmd_Merge].activated && !certutil.options[opt_SourceDir].activated) { PR_fprintf(PR_STDERR, "%s --merge: specify an source database directory " "(--source-dir)\n", progName); return 255; } /* To make a cert, need either a issuer or to self-sign it. */ if (certutil.commands[cmd_CreateAndAddCert].activated && !(certutil.options[opt_IssuerName].activated || certutil.options[opt_SelfSign].activated)) { PR_fprintf(PR_STDERR, "%s -S: must specify issuer (-c) or self-sign (-x).\n", progName); return 255; } /* Using slotname == NULL for listing keys and certs on all slots, * but only that. */ if (!(certutil.commands[cmd_ListKeys].activated || certutil.commands[cmd_DumpChain].activated || certutil.commands[cmd_ListCerts].activated) && slotname == NULL) { PR_fprintf(PR_STDERR, "%s -%c: cannot use \"-h all\" for this command.\n", progName, commandToRun); return 255; } /* Using keytype == nullKey for list all key types, but only that. */ if (!certutil.commands[cmd_ListKeys].activated && keytype == nullKey) { PR_fprintf(PR_STDERR, "%s -%c: cannot use \"-k all\" for this command.\n", progName, commandToRun); return 255; } /* -S open outFile, temporary file for cert request. */ if (certutil.commands[cmd_CreateAndAddCert].activated) { outFile = PR_Open(certreqfile, PR_RDWR | PR_CREATE_FILE | PR_TRUNCATE, 00660); if (!outFile) { PR_fprintf(PR_STDERR, "%s -o: unable to open \"%s\" for writing (%ld, %ld)\n", progName, certreqfile, PR_GetError(), PR_GetOSError()); return 255; } } /* Open the input file. */ if (certutil.options[opt_InputFile].activated) { inFile = PR_Open(certutil.options[opt_InputFile].arg, PR_RDONLY, 0); if (!inFile) { PR_fprintf(PR_STDERR, "%s: unable to open \"%s\" for reading (%ld, %ld).\n", progName, certutil.options[opt_InputFile].arg, PR_GetError(), PR_GetOSError()); return 255; } } /* Open the output file. */ if (certutil.options[opt_OutputFile].activated && !outFile) { outFile = PR_Open(certutil.options[opt_OutputFile].arg, PR_CREATE_FILE | PR_RDWR | PR_TRUNCATE, 00660); if (!outFile) { PR_fprintf(PR_STDERR, "%s: unable to open \"%s\" for writing (%ld, %ld).\n", progName, certutil.options[opt_OutputFile].arg, PR_GetError(), PR_GetOSError()); return 255; } } name = SECU_GetOptionArg(&certutil, opt_Nickname); PK11_SetPasswordFunc(SECU_GetModulePassword); if (PR_TRUE == initialize) { /* Initialize NSPR and NSS. */ PR_Init(PR_SYSTEM_THREAD, PR_PRIORITY_NORMAL, 1); if (!certutil.commands[cmd_UpgradeMerge].activated) { rv = NSS_Initialize(SECU_ConfigDirectory(NULL), certPrefix, certPrefix, "secmod.db", readOnly ? NSS_INIT_READONLY: 0); } else { rv = NSS_InitWithMerge(SECU_ConfigDirectory(NULL), certPrefix, certPrefix, "secmod.db", sourceDir, srcCertPrefix, srcCertPrefix, upgradeID, upgradeTokenName, readOnly ? NSS_INIT_READONLY: 0); } if (rv != SECSuccess) { SECU_PrintPRandOSError(progName); rv = SECFailure; goto shutdown; } initialized = PR_TRUE; SECU_RegisterDynamicOids(); } certHandle = CERT_GetDefaultCertDB(); if (certutil.commands[cmd_Version].activated) { printf("Certificate database content version: command not implemented.\n"); } if (PL_strcmp(slotname, "internal") == 0) slot = PK11_GetInternalKeySlot(); else if (slotname != NULL) slot = PK11_FindSlotByName(slotname); if ( !slot && (certutil.commands[cmd_NewDBs].activated || certutil.commands[cmd_ModifyCertTrust].activated || certutil.commands[cmd_ChangePassword].activated || certutil.commands[cmd_TokenReset].activated || certutil.commands[cmd_CreateAndAddCert].activated || certutil.commands[cmd_AddCert].activated || certutil.commands[cmd_Merge].activated || certutil.commands[cmd_UpgradeMerge].activated || certutil.commands[cmd_AddEmailCert].activated)) { SECU_PrintError(progName, "could not find the slot %s",slotname); rv = SECFailure; goto shutdown; } /* If creating new database, initialize the password. */ if (certutil.commands[cmd_NewDBs].activated) { SECU_ChangePW2(slot, 0, 0, certutil.options[opt_PasswordFile].arg, certutil.options[opt_NewPasswordFile].arg); } /* walk through the upgrade merge if necessary. * This option is more to test what some applications will want to do * to do an automatic upgrade. The --merge command is more useful for * the general case where 2 database need to be merged together. */ if (certutil.commands[cmd_UpgradeMerge].activated) { if (*upgradeTokenName == 0) { upgradeTokenName = upgradeID; } if (!PK11_IsInternal(slot)) { fprintf(stderr, "Only internal DB's can be upgraded\n"); rv = SECSuccess; goto shutdown; } if (!PK11_IsRemovable(slot)) { printf("database already upgraded.\n"); rv = SECSuccess; goto shutdown; } if (!PK11_NeedLogin(slot)) { printf("upgrade complete!\n"); rv = SECSuccess; goto shutdown; } /* authenticate to the old DB if necessary */ if (PORT_Strcmp(PK11_GetTokenName(slot), upgradeTokenName) == 0) { /* if we need a password, supply it. This will be the password * for the old database */ rv = PK11_Authenticate(slot, PR_FALSE, &pwdata2); if (rv != SECSuccess) { SECU_PrintError(progName, "Could not get password for %s", upgradeTokenName); goto shutdown; } /* * if we succeeded above, but still aren't logged in, that means * we just supplied the password for the old database. We may * need the password for the new database. NSS will automatically * change the token names at this point */ if (PK11_IsLoggedIn(slot, &pwdata)) { printf("upgrade complete!\n"); rv = SECSuccess; goto shutdown; } } /* call PK11_IsPresent to update our cached token information */ if (!PK11_IsPresent(slot)) { /* this shouldn't happen. We call isPresent to force a token * info update */ fprintf(stderr, "upgrade/merge internal error\n"); rv = SECFailure; goto shutdown; } /* the token is now set to the state of the source database, * if we need a password for it, PK11_Authenticate will * automatically prompt us */ rv = PK11_Authenticate(slot, PR_FALSE, &pwdata); if (rv == SECSuccess) { printf("upgrade complete!\n"); } else { SECU_PrintError(progName, "Could not get password for %s", PK11_GetTokenName(slot)); } goto shutdown; } /* * merge 2 databases. */ if (certutil.commands[cmd_Merge].activated) { PK11SlotInfo *sourceSlot = NULL; PK11MergeLog *log; char *modspec = PR_smprintf( "configDir='%s' certPrefix='%s' tokenDescription='%s'", sourceDir, srcCertPrefix, *upgradeTokenName ? upgradeTokenName : "Source Database"); if (!modspec) { rv = SECFailure; goto shutdown; } sourceSlot = SECMOD_OpenUserDB(modspec); PR_smprintf_free(modspec); if (!sourceSlot) { SECU_PrintError(progName, "couldn't open source database"); rv = SECFailure; goto shutdown; } rv = PK11_Authenticate(slot, PR_FALSE, &pwdata); if (rv != SECSuccess) { SECU_PrintError(progName, "Couldn't get password for %s", PK11_GetTokenName(slot)); goto merge_fail; } rv = PK11_Authenticate(sourceSlot, PR_FALSE, &pwdata2); if (rv != SECSuccess) { SECU_PrintError(progName, "Couldn't get password for %s", PK11_GetTokenName(sourceSlot)); goto merge_fail; } log = PK11_CreateMergeLog(); if (!log) { rv = SECFailure; SECU_PrintError(progName, "couldn't create error log"); goto merge_fail; } rv = PK11_MergeTokens(slot, sourceSlot, log, &pwdata, &pwdata2); if (rv != SECSuccess) { DumpMergeLog(progName, log); } PK11_DestroyMergeLog(log); merge_fail: SECMOD_CloseUserDB(sourceSlot); PK11_FreeSlot(sourceSlot); goto shutdown; } /* The following 8 options are mutually exclusive with all others. */ /* List certs (-L) */ if (certutil.commands[cmd_ListCerts].activated) { rv = ListCerts(certHandle, name, slot, certutil.options[opt_BinaryDER].activated, certutil.options[opt_ASCIIForIO].activated, (outFile) ? outFile : PR_STDOUT, &pwdata); goto shutdown; } if (certutil.commands[cmd_DumpChain].activated) { rv = DumpChain(certHandle, name); goto shutdown; } /* XXX needs work */ /* List keys (-K) */ if (certutil.commands[cmd_ListKeys].activated) { rv = ListKeys(slot, name, 0 /*keyindex*/, keytype, PR_FALSE /*dopriv*/, &pwdata); goto shutdown; } /* List modules (-U) */ if (certutil.commands[cmd_ListModules].activated) { rv = ListModules(); goto shutdown; } /* Delete cert (-D) */ if (certutil.commands[cmd_DeleteCert].activated) { rv = DeleteCert(certHandle, name); goto shutdown; } /* Delete key (-F) */ if (certutil.commands[cmd_DeleteKey].activated) { rv = DeleteKey(name, &pwdata); goto shutdown; } /* Modify trust attribute for cert (-M) */ if (certutil.commands[cmd_ModifyCertTrust].activated) { rv = ChangeTrustAttributes(certHandle, slot, name, certutil.options[opt_Trust].arg, &pwdata); goto shutdown; } /* Change key db password (-W) (future - change pw to slot?) */ if (certutil.commands[cmd_ChangePassword].activated) { rv = SECU_ChangePW2(slot, 0, 0, certutil.options[opt_PasswordFile].arg, certutil.options[opt_NewPasswordFile].arg); goto shutdown; } /* Reset the a token */ if (certutil.commands[cmd_TokenReset].activated) { char *sso_pass = ""; if (certutil.options[opt_SSOPass].activated) { sso_pass = certutil.options[opt_SSOPass].arg; } rv = PK11_ResetToken(slot,sso_pass); goto shutdown; } /* Check cert validity against current time (-V) */ if (certutil.commands[cmd_CheckCertValidity].activated) { /* XXX temporary hack for fips - must log in to get priv key */ if (certutil.options[opt_VerifySig].activated) { if (slot && PK11_NeedLogin(slot)) { SECStatus newrv = PK11_Authenticate(slot, PR_TRUE, &pwdata); if (newrv != SECSuccess) { SECU_PrintError(progName, "could not authenticate to token %s.", PK11_GetTokenName(slot)); goto shutdown; } } } rv = ValidateCert(certHandle, name, certutil.options[opt_ValidityTime].arg, certutil.options[opt_Usage].arg, certutil.options[opt_VerifySig].activated, certutil.options[opt_DetailedInfo].activated, &pwdata); if (rv != SECSuccess && PR_GetError() == SEC_ERROR_INVALID_ARGS) SECU_PrintError(progName, "validation failed"); goto shutdown; } /* * Key generation */ /* These commands may require keygen. */ if (certutil.commands[cmd_CertReq].activated || certutil.commands[cmd_CreateAndAddCert].activated || certutil.commands[cmd_GenKeyPair].activated) { if (keysource) { CERTCertificate *keycert; keycert = CERT_FindCertByNicknameOrEmailAddr(certHandle, keysource); if (!keycert) { keycert = PK11_FindCertFromNickname(keysource, NULL); if (!keycert) { SECU_PrintError(progName, "%s is neither a key-type nor a nickname", keysource); return SECFailure; } } privkey = PK11_FindKeyByDERCert(slot, keycert, &pwdata); if (privkey) pubkey = CERT_ExtractPublicKey(keycert); if (!pubkey) { SECU_PrintError(progName, "Could not get keys from cert %s", keysource); rv = SECFailure; CERT_DestroyCertificate(keycert); goto shutdown; } keytype = privkey->keyType; /* On CertReq for renewal if no subject has been * specified obtain it from the certificate. */ if (certutil.commands[cmd_CertReq].activated && !subject) { subject = CERT_AsciiToName(keycert->subjectName); if (!subject) { SECU_PrintError(progName, "Could not get subject from certificate %s", keysource); CERT_DestroyCertificate(keycert); rv = SECFailure; goto shutdown; } } CERT_DestroyCertificate(keycert); } else { privkey = CERTUTIL_GeneratePrivateKey(keytype, slot, keysize, publicExponent, certutil.options[opt_NoiseFile].arg, &pubkey, certutil.options[opt_PQGFile].arg, &pwdata); if (privkey == NULL) { SECU_PrintError(progName, "unable to generate key(s)\n"); rv = SECFailure; goto shutdown; } } privkey->wincx = &pwdata; PORT_Assert(pubkey != NULL); /* If all that was needed was keygen, exit. */ if (certutil.commands[cmd_GenKeyPair].activated) { rv = SECSuccess; goto shutdown; } } /* If we need a list of extensions convert the flags into list format */ if (certutil.commands[cmd_CertReq].activated || certutil.commands[cmd_CreateAndAddCert].activated || certutil.commands[cmd_CreateNewCert].activated) { certutil_extns[ext_keyUsage].activated = certutil.options[opt_AddCmdKeyUsageExt].activated; if (!certutil_extns[ext_keyUsage].activated) { certutil_extns[ext_keyUsage].activated = certutil.options[opt_AddKeyUsageExt].activated; } else { certutil_extns[ext_keyUsage].arg = certutil.options[opt_AddCmdKeyUsageExt].arg; } certutil_extns[ext_basicConstraint].activated = certutil.options[opt_AddBasicConstraintExt].activated; certutil_extns[ext_authorityKeyID].activated = certutil.options[opt_AddAuthorityKeyIDExt].activated; certutil_extns[ext_subjectKeyID].activated = certutil.options[opt_AddSubjectKeyIDExt].activated; certutil_extns[ext_CRLDistPts].activated = certutil.options[opt_AddCRLDistPtsExt].activated; certutil_extns[ext_NSCertType].activated = certutil.options[opt_AddCmdNSCertTypeExt].activated; if (!certutil_extns[ext_NSCertType].activated) { certutil_extns[ext_NSCertType].activated = certutil.options[opt_AddNSCertTypeExt].activated; } else { certutil_extns[ext_NSCertType].arg = certutil.options[opt_AddCmdNSCertTypeExt].arg; } certutil_extns[ext_extKeyUsage].activated = certutil.options[opt_AddCmdExtKeyUsageExt].activated; if (!certutil_extns[ext_extKeyUsage].activated) { certutil_extns[ext_extKeyUsage].activated = certutil.options[opt_AddExtKeyUsageExt].activated; } else { certutil_extns[ext_extKeyUsage].arg = certutil.options[opt_AddCmdExtKeyUsageExt].arg; } certutil_extns[ext_authInfoAcc].activated = certutil.options[opt_AddAuthInfoAccExt].activated; certutil_extns[ext_subjInfoAcc].activated = certutil.options[opt_AddSubjInfoAccExt].activated; certutil_extns[ext_certPolicies].activated = certutil.options[opt_AddCertPoliciesExt].activated; certutil_extns[ext_policyMappings].activated = certutil.options[opt_AddPolicyMapExt].activated; certutil_extns[ext_policyConstr].activated = certutil.options[opt_AddPolicyConstrExt].activated; certutil_extns[ext_inhibitAnyPolicy].activated = certutil.options[opt_AddInhibAnyExt].activated; } /* * Certificate request */ /* Make a cert request (-R). */ if (certutil.commands[cmd_CertReq].activated) { rv = CertReq(privkey, pubkey, keytype, hashAlgTag, subject, certutil.options[opt_PhoneNumber].arg, certutil.options[opt_ASCIIForIO].activated, certutil.options[opt_ExtendedEmailAddrs].arg, certutil.options[opt_ExtendedDNSNames].arg, certutil_extns, outFile ? outFile : PR_STDOUT); if (rv) goto shutdown; privkey->wincx = &pwdata; } /* * Certificate creation */ /* If making and adding a cert, create a cert request file first without * any extensions, then load it with the command line extensions * and output the cert to another file. */ if (certutil.commands[cmd_CreateAndAddCert].activated) { static certutilExtnList nullextnlist = {{PR_FALSE, NULL}}; rv = CertReq(privkey, pubkey, keytype, hashAlgTag, subject, certutil.options[opt_PhoneNumber].arg, certutil.options[opt_ASCIIForIO].activated, NULL, NULL, nullextnlist, outFile ? outFile : PR_STDOUT); if (rv) goto shutdown; privkey->wincx = &pwdata; PR_Close(outFile); inFile = PR_Open(certreqfile, PR_RDONLY, 0); if (!inFile) { PR_fprintf(PR_STDERR, "Failed to open file \"%s\" (%ld, %ld).\n", certreqfile, PR_GetError(), PR_GetOSError()); rv = SECFailure; goto shutdown; } outFile = PR_Open(certfile, PR_RDWR | PR_CREATE_FILE | PR_TRUNCATE, 00660); if (!outFile) { PR_fprintf(PR_STDERR, "Failed to open file \"%s\" (%ld, %ld).\n", certfile, PR_GetError(), PR_GetOSError()); rv = SECFailure; goto shutdown; } } /* Create a certificate (-C or -S). */ if (certutil.commands[cmd_CreateAndAddCert].activated || certutil.commands[cmd_CreateNewCert].activated) { rv = CreateCert(certHandle, slot, certutil.options[opt_IssuerName].arg, inFile, outFile, &privkey, &pwdata, hashAlgTag, serialNumber, warpmonths, validityMonths, certutil.options[opt_ExtendedEmailAddrs].arg, certutil.options[opt_ExtendedDNSNames].arg, certutil.options[opt_ASCIIForIO].activated, certutil.options[opt_SelfSign].activated, certutil_extns); if (rv) goto shutdown; } /* * Adding a cert to the database (or slot) */ if (certutil.commands[cmd_CreateAndAddCert].activated) { PORT_Assert(inFile != PR_STDIN); PR_Close(inFile); PR_Close(outFile); inFile = PR_Open(certfile, PR_RDONLY, 0); if (!inFile) { PR_fprintf(PR_STDERR, "Failed to open file \"%s\" (%ld, %ld).\n", certfile, PR_GetError(), PR_GetOSError()); rv = SECFailure; goto shutdown; } } /* -A -E or -S Add the cert to the DB */ if (certutil.commands[cmd_CreateAndAddCert].activated || certutil.commands[cmd_AddCert].activated || certutil.commands[cmd_AddEmailCert].activated) { rv = AddCert(slot, certHandle, name, certutil.options[opt_Trust].arg, inFile, certutil.options[opt_ASCIIForIO].activated, certutil.commands[cmd_AddEmailCert].activated,&pwdata); if (rv) goto shutdown; } if (certutil.commands[cmd_CreateAndAddCert].activated) { PORT_Assert(inFile != PR_STDIN); PR_Close(inFile); PR_Delete(certfile); PR_Delete(certreqfile); } shutdown: if (slot) { PK11_FreeSlot(slot); } if (privkey) { SECKEY_DestroyPrivateKey(privkey); } if (pubkey) { SECKEY_DestroyPublicKey(pubkey); } /* Open the batch command file. * * - If -B option is specified, the contents in the * command file will be interpreted as subsequent certutil * commands to be executed in the current certutil process * context after the current certutil command has been executed. * - Each line in the command file consists of the command * line arguments for certutil. * - The -d option will be ignored if specified in the * command file. * - Quoting with double quote characters ("...") is supported * to allow white space in a command line argument. The * double quote character cannot be escaped and quoting cannot * be nested in this version. * - each line in the batch file is limited to 512 characters */ if ((SECSuccess == rv) && certutil.commands[cmd_Batch].activated) { FILE* batchFile = NULL; char nextcommand[512]; if (!certutil.options[opt_InputFile].activated || !certutil.options[opt_InputFile].arg) { PR_fprintf(PR_STDERR, "%s: no batch input file specified.\n", progName); return 255; } batchFile = fopen(certutil.options[opt_InputFile].arg, "r"); if (!batchFile) { PR_fprintf(PR_STDERR, "%s: unable to open \"%s\" for reading (%ld, %ld).\n", progName, certutil.options[opt_InputFile].arg, PR_GetError(), PR_GetOSError()); return 255; } /* read and execute command-lines in a loop */ while ( (SECSuccess == rv ) && fgets(nextcommand, sizeof(nextcommand), batchFile)) { /* we now need to split the command into argc / argv format */ char* commandline = PORT_Strdup(nextcommand); PRBool invalid = PR_FALSE; int newargc = 2; char* space = NULL; char* nextarg = NULL; char** newargv = NULL; char* crlf = PORT_Strrchr(commandline, '\n'); if (crlf) { *crlf = '\0'; } newargv = PORT_Alloc(sizeof(char*)*(newargc+1)); newargv[0] = progName; newargv[1] = commandline; nextarg = commandline; while ((space = PORT_Strpbrk(nextarg, " \f\n\r\t\v")) ) { while (isspace(*space) ) { *space = '\0'; space ++; } if (*space == '\0') { break; } else if (*space != '\"') { nextarg = space; } else { char* closingquote = strchr(space+1, '\"'); if (closingquote) { *closingquote = '\0'; space++; nextarg = closingquote+1; } else { invalid = PR_TRUE; nextarg = space; } } newargc++; newargv = PORT_Realloc(newargv, sizeof(char*)*(newargc+1)); newargv[newargc-1] = space; } newargv[newargc] = NULL; /* invoke next command */ if (PR_TRUE == invalid) { PR_fprintf(PR_STDERR, "Missing closing quote in batch command :\n%s\nNot executed.\n", nextcommand); rv = SECFailure; } else { if (0 != certutil_main(newargc, newargv, PR_FALSE) ) rv = SECFailure; } PORT_Free(newargv); PORT_Free(commandline); } fclose(batchFile); } if ((initialized == PR_TRUE) && NSS_Shutdown() != SECSuccess) { exit(1); } if (rv == SECSuccess) { return 0; } else { return 255; } } int main(int argc, char **argv) { int rv = certutil_main(argc, argv, PR_TRUE); PR_Cleanup(); return rv; }