/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ #include "nsISupports.idl" interface nsIProtocolHandler; interface nsIChannel; interface nsIURI; interface nsIFile; interface nsIDOMNode; interface nsIPrincipal; interface nsILoadInfo; /** * nsIIOService provides a set of network utility functions. This interface * duplicates many of the nsIProtocolHandler methods in a protocol handler * independent way (e.g., NewURI inspects the scheme in order to delegate * creation of the new URI to the appropriate protocol handler). nsIIOService * also provides a set of URL parsing utility functions. These are provided * as a convenience to the programmer and in some cases to improve performance * by eliminating intermediate data structures and interfaces. */ [scriptable, uuid(b1c3c61d-2df9-4240-ae16-0355b51a2770)] interface nsIIOService : nsISupports { /** * Returns a protocol handler for a given URI scheme. * * @param aScheme the URI scheme * @return reference to corresponding nsIProtocolHandler */ nsIProtocolHandler getProtocolHandler(in string aScheme); /** * Returns the protocol flags for a given scheme. * * @param aScheme the URI scheme * @return value of corresponding nsIProtocolHandler::protocolFlags */ unsigned long getProtocolFlags(in string aScheme); /** * This method constructs a new URI by determining the scheme of the * URI spec, and then delegating the construction of the URI to the * protocol handler for that scheme. QueryInterface can be used on * the resulting URI object to obtain a more specific type of URI. * * @see nsIProtocolHandler::newURI */ nsIURI newURI(in AUTF8String aSpec, in string aOriginCharset, in nsIURI aBaseURI); /** * This method constructs a new URI from a nsIFile. * * @param aFile specifies the file path * @return reference to a new nsIURI object * * Note: in the future, for perf reasons we should allow * callers to specify whether this is a file or directory by * splitting this into newDirURI() and newActualFileURI(). */ nsIURI newFileURI(in nsIFile aFile); /** * Creates a channel for a given URI. * * @param aURI * nsIURI from which to make a channel * @param aLoadingNode * The loadingDocument of the channel. * The element or document where the result of this request will be * used. This is the document/element that will get access to the * result of this request. For example for an image load, it's the * document in which the image will be loaded. And for a CSS * stylesheet it's the document whose rendering will be affected by * the stylesheet. * If possible, pass in the element which is performing the load. But * if the load is coming from a JS API (such as XMLHttpRequest) or if * the load might be coalesced across multiple elements (such as * for ) then pass in the Document node instead. * For loads that are not related to any document, such as loads coming * from addons or internal browser features, use null here. * @param aLoadingPrincipal * The loadingPrincipal of the channel. * The principal of the document where the result of this request will * be used. * This is generally the principal of the aLoadingNode. However for * loads where aLoadingNode is null this argument still needs to be * passed. For example for loads from a WebWorker, pass the principal * of that worker. For loads from an addon or from internal browser * features, pass the system principal. * This principal should almost always be the system principal if * aLoadingNode is null. The only exception to this is for loads * from WebWorkers since they don't have any nodes to be passed as * aLoadingNode. * Please note, aLoadingPrincipal is *not* the principal of the * resource being loaded. But rather the principal of the context * where the resource will be used. * @param aTriggeringPrincipal * The triggeringPrincipal of the load. * The triggeringPrincipal is the principal of the resource that caused * this particular URL to be loaded. * Most likely the triggeringPrincipal and the loadingPrincipal are * identical, in which case the triggeringPrincipal can be left out. * In some cases the loadingPrincipal and the triggeringPrincipal are * different however, e.g. a stylesheet may import a subresource. In * that case the principal of the stylesheet which contains the * import command is the triggeringPrincipal, and the principal of * the document whose rendering is affected is the loadingPrincipal. * @param aSecurityFlags * The securityFlags of the channel. * Any of the securityflags defined in nsILoadInfo.idl * @param aContentPolicyType * The contentPolicyType of the channel. * Any of the content types defined in nsIContentPolicy.idl * @return reference to the new nsIChannel object * * Please note, if you provide both a loadingNode and a loadingPrincipal, * then loadingPrincipal must be equal to loadingNode->NodePrincipal(). * But less error prone is to just supply a loadingNode. * * Keep in mind that URIs coming from a webpage should *never* use the * systemPrincipal as the loadingPrincipal. */ nsIChannel newChannelFromURI2(in nsIURI aURI, in nsIDOMNode aLoadingNode, in nsIPrincipal aLoadingPrincipal, in nsIPrincipal aTriggeringPrincipal, in unsigned long aSecurityFlags, in unsigned long aContentPolicyType); /** * Equivalent to newChannelFromURI2(aURI, aLoadingNode, ...) */ nsIChannel newChannelFromURIWithLoadInfo(in nsIURI aURI, in nsILoadInfo aLoadInfo); /** * Creates a channel for a given URI. * * @param aURI nsIURI from which to make a channel * @return reference to the new nsIChannel object */ nsIChannel newChannelFromURI(in nsIURI aURI); /** * Equivalent to newChannelFromURI2(newURI(...)) */ nsIChannel newChannel2(in AUTF8String aSpec, in string aOriginCharset, in nsIURI aBaseURI, in nsIDOMNode aLoadingNode, in nsIPrincipal aLoadingPrincipal, in nsIPrincipal aTriggeringPrincipal, in unsigned long aSecurityFlags, in unsigned long aContentPolicyType); /** * Equivalent to newChannelFromURI(newURI(...)) */ nsIChannel newChannel(in AUTF8String aSpec, in string aOriginCharset, in nsIURI aBaseURI); /** * Returns true if networking is in "offline" mode. When in offline mode, * attempts to access the network will fail (although this does not * necessarily correlate with whether there is actually a network * available -- that's hard to detect without causing the dialer to * come up). * * Changing this fires observer notifications ... see below. */ attribute boolean offline; /** * Set whether network appears to be offline for network connections from * a given appID. * * Calling this function may fire the "network:app-offline-status-changed" * notification, which is also sent to child processes containing this appId. * 'state' must one of nsIAppOfflineInfo::{ONLINE|OFFLINE|WIFI_ONLY}. */ void setAppOffline(in uint32_t appId, in long state); /** * Returns true if given appId is currently not allowed to make network * connections. It will return true if the app is in the wifi-only state * and we are currently on a 3G connection. * The returned value does not depend on the offline state of the browser. */ boolean isAppOffline(in uint32_t appId); /** * Returns the state of the app with the given appId. * returns nsIAppOfflineInfo::{ONLINE,OFFLINE,WIFI_ONLY} */ long getAppOfflineState(in uint32_t appId); /** * Checks if a port number is banned. This involves consulting a list of * unsafe ports, corresponding to network services that may be easily * exploitable. If the given port is considered unsafe, then the protocol * handler (corresponding to aScheme) will be asked whether it wishes to * override the IO service's decision to block the port. This gives the * protocol handler ultimate control over its own security policy while * ensuring reasonable, default protection. * * @see nsIProtocolHandler::allowPort */ boolean allowPort(in long aPort, in string aScheme); /** * Utility to extract the scheme from a URL string, consistently and * according to spec (see RFC 2396). * * NOTE: Most URL parsing is done via nsIURI, and in fact the scheme * can also be extracted from a URL string via nsIURI. This method * is provided purely as an optimization. * * @param aSpec the URL string to parse * @return URL scheme * * @throws NS_ERROR_MALFORMED_URI if URL string is not of the right form. */ ACString extractScheme(in AUTF8String urlString); }; [scriptable, uuid(4ac296a0-ca1b-44f4-8787-117a88cb70fb)] interface nsIAppOfflineInfo : nsISupports { readonly attribute unsigned long appId; const long ONLINE = 1; const long OFFLINE = 2; const long WIFI_ONLY = 3; readonly attribute long mode; }; %{C++ /** * We send notifications through nsIObserverService with topic * NS_IOSERVICE_GOING_OFFLINE_TOPIC and data NS_IOSERVICE_OFFLINE * when 'offline' has changed from false to true, and we are about * to shut down network services such as DNS. When those * services have been shut down, we send a notification with * topic NS_IOSERVICE_OFFLINE_STATUS_TOPIC and data * NS_IOSERVICE_OFFLINE. * * When 'offline' changes from true to false, then after * network services have been restarted, we send a notification * with topic NS_IOSERVICE_OFFLINE_STATUS_TOPIC and data * NS_IOSERVICE_ONLINE. */ #define NS_IOSERVICE_GOING_OFFLINE_TOPIC "network:offline-about-to-go-offline" #define NS_IOSERVICE_OFFLINE_STATUS_TOPIC "network:offline-status-changed" #define NS_IOSERVICE_OFFLINE "offline" #define NS_IOSERVICE_ONLINE "online" /** * When network:app-offline-status-changed is fired, * the 'Subject' argument is a nsIOfflineAppInfo. */ #define NS_IOSERVICE_APP_OFFLINE_STATUS_TOPIC "network:app-offline-status-changed" %}