#!/usr/bin/perl # # ***** BEGIN LICENSE BLOCK ***** # Version: MPL 1.1/GPL 2.0/LGPL 2.1 # # The contents of this file are subject to the Mozilla Public License Version # 1.1 (the "License"); you may not use this file except in compliance with # the License. You may obtain a copy of the License at # http://www.mozilla.org/MPL/ # # Software distributed under the License is distributed on an "AS IS" basis, # WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License # for the specific language governing rights and limitations under the # License. # # The Original Code is mozilla.org code. # # The Initial Developer of the Original Code is # Netscape Communications Corporation. # Portions created by the Initial Developer are Copyright (C) 1999 # the Initial Developer. All Rights Reserved. # # Contributor(s): # Jungshik Shin # # Alternatively, the contents of this file may be used under the terms of # either the GNU General Public License Version 2 or later (the "GPL"), or # the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), # in which case the provisions of the GPL or the LGPL are applicable instead # of those above. If you wish to allow use of your version of this file only # under the terms of either the GPL or the LGPL, and not to allow others to # use your version of this file under the terms of the MPL, indicate your # decision by deleting the provisions above and replace them with the notice # and other provisions required by the GPL or the LGPL. If you do not delete # the provisions above, a recipient may use your version of this file under # the terms of any one of the MPL, the GPL or the LGPL. # # ***** END LICENSE BLOCK ***** ###################################################################### # # Initial global variable # ###################################################################### %gcount = (); %pat = (); %map = ( "M" => "1", "N" => "2", "Z" => "3", "C" => "4", "L" => "5", "P" => "6", "S" => "7" ); %special = (); ###################################################################### # # Open the unicode database file # ###################################################################### open ( UNICODATA , "< UnicodeData-Latest.txt") || die "cannot find UnicodeData-Latest.txt"; ###################################################################### # # Open the output file # ###################################################################### open ( OUT , "> ../src/cattable.h") || die "cannot open output ../src/cattable.h file"; ###################################################################### # # Generate license and header # ###################################################################### $mpl = <) { chop; ###################################################################### # # Get value from fields # ###################################################################### @f = split(/;/ , $_); $c = $f[0]; # The unicode value $n = $f[1]; # The unicode name $g = $f[2]; # The General Category $cat = substr($g, 0, 1); # All CJK Compatibility ideographs belong to Lo if ($n =~ /^CJK COMPATIBILITY IDEOGRAPH/) { $catnum = $map{$cat}; if ($cat ne "L") { print "WARNING !!!! " . " error in handling CJK Compatibility Ideograph block\n\n"; } if (hex($prevcjkcomp) + 1 != hex($c)) { if (hex($prevcjkcomp) != 0) { $sh{$cjkcompkey} = $prevcjkcomp; } $cjkcompkey = sprintf("CJK Compatibility #%d", ++$cjkcompidx); $sl{$cjkcompkey} = $c; $sc{$cjkcompkey} = $catnum; push @special, $cjkcompkey; } $prevcjkcomp = $c; } elsif(( substr($n, 0, 1) ne "<") || ($n eq "")) { # # print $g; # $gcount{$g}++; $gcount{$cat}++; $category{$c} = $cat; # print $g . " = " . $gcount{$g} . "\n"; } else { # Handle special block @pair=split(/, /, $n ); $catnum = $map{$cat}; $pair[0] =~ s/^ %d\n", $pair[0], $pair[1], $catnum; if( $pair[1] eq "First>") { $sl{$pair[0]} = $c; $sc{$pair[0]} = $catnum; push @special, $pair[0]; } elsif ( $pair[1] eq "Last>") { $sh{$pair[0]} = $c; if($sc{$pair[0]} ne $catnum) { print "WARNING !!!! error in handling special block\n\n"; } } else { print "WARNING !!!! error in handling special block\n\n"; } } } # take care of the last CJK Compatibility block $sh{$cjkcompkey} = $prevcjkcomp; # @cats = keys(%gcount); # foreach $cat ( sort(@cats) ) { # $count = $gcount{$cat}; # print "$cat ==> $count\n"; # } # We treat characters < U+1D00 as "plane 0" and all the rest of planes 0 and 1 # as "plane 1". This gives a relatively even distribution of patterns between # planes. If you change the value of $planeSplit, make sure that none of the # ranges below straddles the new value! $planeSplit = 0x1d00; @range = ( 0x0000, 0x07ff, 0x0900, 0x1c7f, 0x1d00, 0x33ff, 0x4dc0, 0x4dff, 0xa000, 0xaa7f, 0xf900, 0xffff, 0x10000, 0x104af, 0x10800, 0x1083f, 0x10900, 0x1093f, 0x10a00, 0x10a5f, 0x12000, 0x1247f, 0x1d000, 0x1d7ff, 0x1f000, 0x1f1ff ); $totaldata = 0; $tt=($#range+1) / 2; @newidx = (0); @patarray = (); $oldplane = -1; @planes = (); for($t = 1; $t <= $tt; $t++) { $tl = $range[($t-1) * 2]; $th = $range[($t-1) * 2 + 1]; $ts = ( $th - $tl ) >> 3; $totaldata += $ts + 1; if ($planeSplit > $tl && $planeSplit < $th) { printf STDERR "plane split %04X falls within range %04X - %04X\n", $planeSplit, $tl, $th; die "This program is now broken!!!\n\n\n"; } if ($tl < $planeSplit) { $plane = 0; } else { $plane = 1; } if ($oldplane != $plane) { if ($oldplane != -1) { printf STDERR "Plane %d has %d patterns\n", $oldplane, $newidx[$oldplane]; if ($newidx[$oldplane] > 256) { printf STDERR "We have more than 256 patterns for plane %d\n", $oldplane; die "This program is now broken!!!\n\n\n"; } } $newidx[$plane] = 0; push @planes, $plane; } $oldplane = $plane; printf OUT "static const PRUint8 gGenCatIdx%d[%d] = {\n", $t, $ts + 1; for($i = ($tl >> 3); $i <= ($th >> 3) ; $i ++ ) { $data = 0; for($j = 0; $j < 8 ; $j++) { $k = sprintf("%04X", (($i << 3) + $j)); $cat = $category{$k}; if( $cat ne "") { $data = $data + ($map{$cat} << (4*$j)); } } $pattern = sprintf("0x%08X", $data); $idx = $pat[$plane]{$pattern}; unless( exists($pat[$plane]{$pattern})){ $idx = $newidx[$plane]++; $patarray[$plane][$idx] = $pattern; $pat[$plane]{$pattern} = $idx; } printf OUT " %3d, // U+%06X - U+%06X : %s\n" , $idx, ($i << 3),((($i +1)<< 3)-1), $pattern ; } printf OUT "};\n\n"; if($t ne $tt) { $tl = $range[($t-1) * 2 + 1] + 1; $th = $range[$t * 2] - 1; for($i = ($tl >> 3); $i <= ($th >> 3) ; $i ++ ) { $data = 0; for($j = 0; $j < 8 ; $j++) { $k = sprintf("%04X", (($i << 3) + $j)); $cat = $category{$k}; if( $cat ne "") { $data = $data + ($map{$cat} << (4*$j)); } } $pattern = sprintf("0x%08X", $data); if($data ne 0) { print "WARNING, Unicode Database now contain characters " . "which we have not considered. change this program !!!\n\n"; printf "Problem- U+%06X - U+%06X range\n", ($i << 3),((($i +1)<< 3)-1); } } } } printf STDERR "Plane %d has %d patterns\n", $plane, $newidx[$plane]; if ($newidx[$plane] > 256) { printf STDERR "We have more than 256 patterns for plane %d\n", $plane; die "This program is now broken!!!\n\n\n"; } for $plane (@planes) { printf OUT "static const PRUint32 gGenCatPatPl%d[$newidx] = {\n", $plane; for($i = 0 ; $i < $newidx[$plane]; $i++) { printf OUT " %s, // $i \n", $patarray[$plane][$i] ; } printf OUT "}; \n\n"; $totaldata += $newidx[$plane] * 4; } printf OUT "static PRUint8 GetCat(PRUint32 u)\n{\n"; printf OUT " PRUint32 pat;\n"; printf OUT " //\n"; printf OUT " // Handle block which use index table mapping \n"; printf OUT " //\n"; for($t = 1; $t <= $tt; $t++) { $tl = $range[($t-1) * 2]; $th = $range[($t-1) * 2 + 1]; if ($tl < $planeSplit) { $plane = 0; } else { $plane = 1; } printf OUT " // Handle U+%06X to U+%06X\n", $tl, $th; printf OUT " if(0x%06X <= u && u <= 0x%06X) {\n", $tl, $th; printf OUT " pat = " . "gGenCatPatPl%d[gGenCatIdx%d [( u - 0x%06X ) / 8]];\n", $plane, $t, $tl; printf OUT " return (pat >> ((u % 8) * 4)) & 0x0F;\n"; printf OUT " }\n\n"; } printf OUT " //\n"; printf OUT " // Handle blocks which share the same category \n"; printf OUT " //\n"; #@special = keys(%sh); foreach $s ( @special ) { printf OUT " // Handle %s block \n", $s; printf OUT " if(0x%s <= u && u <= 0x%s) \n", $sl{$s}, $sh{$s}; printf OUT " return $sc{$s}; \n\n"; } printf OUT " return 0; // UNDEFINE \n}\n"; printf OUT "// total data size = $totaldata\n"; #$total = 0; #@pats = keys(%pat); #foreach $pattern ( sort(@pats) ) { # $count = $pat{$pattern}; # # print "$cat ==> $count\n"; # $total++; #} print "total = $totaldata\n"; ###################################################################### # # Close files # ###################################################################### close(UNIDATA); close(OUT);