/******************************************************************** * * * THIS FILE IS PART OF THE OggTheora SOFTWARE CODEC SOURCE CODE. * * USE, DISTRIBUTION AND REPRODUCTION OF THIS LIBRARY SOURCE IS * * GOVERNED BY A BSD-STYLE SOURCE LICENSE INCLUDED WITH THIS SOURCE * * IN 'COPYING'. PLEASE READ THESE TERMS BEFORE DISTRIBUTING. * * * * THE Theora SOURCE CODE IS COPYRIGHT (C) 2002-2009 * * by the Xiph.Org Foundation http://www.xiph.org/ * * * ******************************************************************** function: last mod: $Id: theora.h,v 1.17 2003/12/06 18:06:19 arc Exp $ ********************************************************************/ #ifndef _O_THEORA_H_ #define _O_THEORA_H_ #ifdef __cplusplus extern "C" { #endif /* __cplusplus */ #include /* for size_t */ #include /** \file * The libtheora pre-1.0 legacy C API. * * \ingroup oldfuncs * * \section intro Introduction * * This is the documentation for the libtheora legacy C API, declared in * the theora.h header, which describes the old interface used before * the 1.0 release. This API was widely deployed for several years and * remains supported, but for new code we recommend the cleaner API * declared in theoradec.h and theoraenc.h. * * libtheora is the reference implementation for * Theora, a free video codec. * Theora is derived from On2's VP3 codec with improved integration with * Ogg multimedia formats by Xiph.Org. * * \section overview Overview * * This library will both decode and encode theora packets to/from raw YUV * frames. In either case, the packets will most likely either come from or * need to be embedded in an Ogg stream. Use * libogg or * liboggz * to extract/package these packets. * * \section decoding Decoding Process * * Decoding can be separated into the following steps: * -# initialise theora_info and theora_comment structures using * theora_info_init() and theora_comment_init(): \verbatim theora_info info; theora_comment comment; theora_info_init(&info); theora_comment_init(&comment); \endverbatim * -# retrieve header packets from Ogg stream (there should be 3) and decode * into theora_info and theora_comment structures using * theora_decode_header(). See \ref identification for more information on * identifying which packets are theora packets. \verbatim int i; for (i = 0; i < 3; i++) { (get a theora packet "op" from the Ogg stream) theora_decode_header(&info, &comment, op); } \endverbatim * -# initialise the decoder based on the information retrieved into the * theora_info struct by theora_decode_header(). You will need a * theora_state struct. \verbatim theora_state state; theora_decode_init(&state, &info); \endverbatim * -# pass in packets and retrieve decoded frames! See the yuv_buffer * documentation for information on how to retrieve raw YUV data. \verbatim yuf_buffer buffer; while (last packet was not e_o_s) { (get a theora packet "op" from the Ogg stream) theora_decode_packetin(&state, op); theora_decode_YUVout(&state, &buffer); } \endverbatim * * * \subsection identification Identifying Theora Packets * * All streams inside an Ogg file have a unique serial_no attached to the * stream. Typically, you will want to * - retrieve the serial_no for each b_o_s (beginning of stream) page * encountered within the Ogg file; * - test the first (only) packet on that page to determine if it is a theora * packet; * - once you have found a theora b_o_s page then use the retrieved serial_no * to identify future packets belonging to the same theora stream. * * Note that you \e cannot use theora_packet_isheader() to determine if a * packet is a theora packet or not, as this function does not perform any * checking beyond whether a header bit is present. Instead, use the * theora_decode_header() function and check the return value; or examine the * header bytes at the beginning of the Ogg page. */ /** \defgroup oldfuncs Legacy pre-1.0 C API */ /* @{ */ /** * A YUV buffer for passing uncompressed frames to and from the codec. * This holds a Y'CbCr frame in planar format. The CbCr planes can be * subsampled and have their own separate dimensions and row stride * offsets. Note that the strides may be negative in some * configurations. For theora the width and height of the largest plane * must be a multiple of 16. The actual meaningful picture size and * offset are stored in the theora_info structure; frames returned by * the decoder may need to be cropped for display. * * All samples are 8 bits. Within each plane samples are ordered by * row from the top of the frame to the bottom. Within each row samples * are ordered from left to right. * * During decode, the yuv_buffer struct is allocated by the user, but all * fields (including luma and chroma pointers) are filled by the library. * These pointers address library-internal memory and their contents should * not be modified. * * Conversely, during encode the user allocates the struct and fills out all * fields. The user also manages the data addressed by the luma and chroma * pointers. See the encoder_example.c and dump_video.c example files in * theora/examples/ for more information. */ typedef struct { int y_width; /**< Width of the Y' luminance plane */ int y_height; /**< Height of the luminance plane */ int y_stride; /**< Offset in bytes between successive rows */ int uv_width; /**< Width of the Cb and Cr chroma planes */ int uv_height; /**< Height of the chroma planes */ int uv_stride; /**< Offset between successive chroma rows */ unsigned char *y; /**< Pointer to start of luminance data */ unsigned char *u; /**< Pointer to start of Cb data */ unsigned char *v; /**< Pointer to start of Cr data */ } yuv_buffer; /** * A Colorspace. */ typedef enum { OC_CS_UNSPECIFIED, /**< The colorspace is unknown or unspecified */ OC_CS_ITU_REC_470M, /**< This is the best option for 'NTSC' content */ OC_CS_ITU_REC_470BG, /**< This is the best option for 'PAL' content */ OC_CS_NSPACES /**< This marks the end of the defined colorspaces */ } theora_colorspace; /** * A Chroma subsampling * * These enumerate the available chroma subsampling options supported * by the theora format. See Section 4.4 of the specification for * exact definitions. */ typedef enum { OC_PF_420, /**< Chroma subsampling by 2 in each direction (4:2:0) */ OC_PF_RSVD, /**< Reserved value */ OC_PF_422, /**< Horizonatal chroma subsampling by 2 (4:2:2) */ OC_PF_444 /**< No chroma subsampling at all (4:4:4) */ } theora_pixelformat; /** * Theora bitstream info. * Contains the basic playback parameters for a stream, * corresponding to the initial 'info' header packet. * * Encoded theora frames must be a multiple of 16 in width and height. * To handle other frame sizes, a crop rectangle is specified in * frame_height and frame_width, offset_x and * offset_y. The offset * and size should still be a multiple of 2 to avoid chroma sampling * shifts. Offset values in this structure are measured from the * upper left of the image. * * Frame rate, in frames per second, is stored as a rational * fraction. Aspect ratio is also stored as a rational fraction, and * refers to the aspect ratio of the frame pixels, not of the * overall frame itself. * * See * examples/encoder_example.c for usage examples of the * other paramters and good default settings for the encoder parameters. */ typedef struct { ogg_uint32_t width; /**< encoded frame width */ ogg_uint32_t height; /**< encoded frame height */ ogg_uint32_t frame_width; /**< display frame width */ ogg_uint32_t frame_height; /**< display frame height */ ogg_uint32_t offset_x; /**< horizontal offset of the displayed frame */ ogg_uint32_t offset_y; /**< vertical offset of the displayed frame */ ogg_uint32_t fps_numerator; /**< frame rate numerator **/ ogg_uint32_t fps_denominator; /**< frame rate denominator **/ ogg_uint32_t aspect_numerator; /**< pixel aspect ratio numerator */ ogg_uint32_t aspect_denominator; /**< pixel aspect ratio denominator */ theora_colorspace colorspace; /**< colorspace */ int target_bitrate; /**< nominal bitrate in bits per second */ int quality; /**< Nominal quality setting, 0-63 */ int quick_p; /**< Quick encode/decode */ /* decode only */ unsigned char version_major; unsigned char version_minor; unsigned char version_subminor; void *codec_setup; /* encode only */ int dropframes_p; int keyframe_auto_p; ogg_uint32_t keyframe_frequency; ogg_uint32_t keyframe_frequency_force; /* also used for decode init to get granpos shift correct */ ogg_uint32_t keyframe_data_target_bitrate; ogg_int32_t keyframe_auto_threshold; ogg_uint32_t keyframe_mindistance; ogg_int32_t noise_sensitivity; ogg_int32_t sharpness; theora_pixelformat pixelformat; /**< chroma subsampling mode to expect */ } theora_info; /** Codec internal state and context. */ typedef struct{ theora_info *i; ogg_int64_t granulepos; void *internal_encode; void *internal_decode; } theora_state; /** * Comment header metadata. * * This structure holds the in-stream metadata corresponding to * the 'comment' header packet. * * Meta data is stored as a series of (tag, value) pairs, in * length-encoded string vectors. The first occurence of the * '=' character delimits the tag and value. A particular tag * may occur more than once. The character set encoding for * the strings is always UTF-8, but the tag names are limited * to case-insensitive ASCII. See the spec for details. * * In filling in this structure, theora_decode_header() will * null-terminate the user_comment strings for safety. However, * the bitstream format itself treats them as 8-bit clean, * and so the length array should be treated as authoritative * for their length. */ typedef struct theora_comment{ char **user_comments; /**< An array of comment string vectors */ int *comment_lengths; /**< An array of corresponding string vector lengths in bytes */ int comments; /**< The total number of comment string vectors */ char *vendor; /**< The vendor string identifying the encoder, null terminated */ } theora_comment; /**\name theora_control() codes */ /* \anchor decctlcodes_old * These are the available request codes for theora_control() * when called with a decoder instance. * By convention decoder control codes are odd, to distinguish * them from \ref encctlcodes_old "encoder control codes" which * are even. * * Note that since the 1.0 release, both the legacy and the final * implementation accept all the same control codes, but only the * final API declares the newer codes. * * Keep any experimental or vendor-specific values above \c 0x8000.*/ /*@{*/ /**Get the maximum post-processing level. * The decoder supports a post-processing filter that can improve * the appearance of the decoded images. This returns the highest * level setting for this post-processor, corresponding to maximum * improvement and computational expense. */ #define TH_DECCTL_GET_PPLEVEL_MAX (1) /**Set the post-processing level. * Sets the level of post-processing to use when decoding the * compressed stream. This must be a value between zero (off) * and the maximum returned by TH_DECCTL_GET_PPLEVEL_MAX. */ #define TH_DECCTL_SET_PPLEVEL (3) /**Sets the maximum distance between key frames. * This can be changed during an encode, but will be bounded by * 1<. * If it is set before encoding begins, th_info#keyframe_granule_shift will * be enlarged appropriately. * * \param[in] buf ogg_uint32_t: The maximum distance between key * frames. * \param[out] buf ogg_uint32_t: The actual maximum distance set. * \retval OC_FAULT \a theora_state or \a buf is NULL. * \retval OC_EINVAL \a buf_sz is not sizeof(ogg_uint32_t). * \retval OC_IMPL Not supported by this implementation.*/ #define TH_ENCCTL_SET_KEYFRAME_FREQUENCY_FORCE (4) /**Set the granule position. * Call this after a seek, to update the internal granulepos * in the decoder, to insure that subsequent frames are marked * properly. If you track timestamps yourself and do not use * the granule postion returned by the decoder, then you do * not need to use this control. */ #define TH_DECCTL_SET_GRANPOS (5) /**\anchor encctlcodes_old */ /**Sets the quantization parameters to use. * The parameters are copied, not stored by reference, so they can be freed * after this call. * NULL may be specified to revert to the default parameters. * * \param[in] buf #th_quant_info * \retval OC_FAULT \a theora_state is NULL. * \retval OC_EINVAL Encoding has already begun, the quantization parameters * are not acceptable to this version of the encoder, * \a buf is NULL and \a buf_sz is not zero, * or \a buf is non-NULL and \a buf_sz is * not sizeof(#th_quant_info). * \retval OC_IMPL Not supported by this implementation.*/ #define TH_ENCCTL_SET_QUANT_PARAMS (2) /**Disables any encoder features that would prevent lossless transcoding back * to VP3. * This primarily means disabling block-level QI values and not using 4MV mode * when any of the luma blocks in a macro block are not coded. * It also includes using the VP3 quantization tables and Huffman codes; if you * set them explicitly after calling this function, the resulting stream will * not be VP3-compatible. * If you enable VP3-compatibility when encoding 4:2:2 or 4:4:4 source * material, or when using a picture region smaller than the full frame (e.g. * a non-multiple-of-16 width or height), then non-VP3 bitstream features will * still be disabled, but the stream will still not be VP3-compatible, as VP3 * was not capable of encoding such formats. * If you call this after encoding has already begun, then the quantization * tables and codebooks cannot be changed, but the frame-level features will * be enabled or disabled as requested. * * \param[in] buf int: a non-zero value to enable VP3 compatibility, * or 0 to disable it (the default). * \param[out] buf int: 1 if all bitstream features required for * VP3-compatibility could be set, and 0 otherwise. * The latter will be returned if the pixel format is not * 4:2:0, the picture region is smaller than the full frame, * or if encoding has begun, preventing the quantization * tables and codebooks from being set. * \retval OC_FAULT \a theora_state or \a buf is NULL. * \retval OC_EINVAL \a buf_sz is not sizeof(int). * \retval OC_IMPL Not supported by this implementation.*/ #define TH_ENCCTL_SET_VP3_COMPATIBLE (10) /**Gets the maximum speed level. * Higher speed levels favor quicker encoding over better quality per bit. * Depending on the encoding mode, and the internal algorithms used, quality * may actually improve, but in this case bitrate will also likely increase. * In any case, overall rate/distortion performance will probably decrease. * The maximum value, and the meaning of each value, may change depending on * the current encoding mode (VBR vs. CQI, etc.). * * \param[out] buf int: The maximum encoding speed level. * \retval OC_FAULT \a theora_state or \a buf is NULL. * \retval OC_EINVAL \a buf_sz is not sizeof(int). * \retval OC_IMPL Not supported by this implementation in the current * encoding mode.*/ #define TH_ENCCTL_GET_SPLEVEL_MAX (12) /**Sets the speed level. * By default a speed value of 1 is used. * * \param[in] buf int: The new encoding speed level. * 0 is slowest, larger values use less CPU. * \retval OC_FAULT \a theora_state or \a buf is NULL. * \retval OC_EINVAL \a buf_sz is not sizeof(int), or the * encoding speed level is out of bounds. * The maximum encoding speed level may be * implementation- and encoding mode-specific, and can be * obtained via #TH_ENCCTL_GET_SPLEVEL_MAX. * \retval OC_IMPL Not supported by this implementation in the current * encoding mode.*/ #define TH_ENCCTL_SET_SPLEVEL (14) /*@}*/ #define OC_FAULT -1 /**< General failure */ #define OC_EINVAL -10 /**< Library encountered invalid internal data */ #define OC_DISABLED -11 /**< Requested action is disabled */ #define OC_BADHEADER -20 /**< Header packet was corrupt/invalid */ #define OC_NOTFORMAT -21 /**< Packet is not a theora packet */ #define OC_VERSION -22 /**< Bitstream version is not handled */ #define OC_IMPL -23 /**< Feature or action not implemented */ #define OC_BADPACKET -24 /**< Packet is corrupt */ #define OC_NEWPACKET -25 /**< Packet is an (ignorable) unhandled extension */ #define OC_DUPFRAME 1 /**< Packet is a dropped frame */ /** * Retrieve a human-readable string to identify the encoder vendor and version. * \returns A version string. */ extern const char *theora_version_string(void); /** * Retrieve a 32-bit version number. * This number is composed of a 16-bit major version, 8-bit minor version * and 8 bit sub-version, composed as follows: (VERSION_MAJOR<<16) + (VERSION_MINOR<<8) + (VERSION_SUB) * \returns The version number. */ extern ogg_uint32_t theora_version_number(void); /** * Initialize the theora encoder. * \param th The theora_state handle to initialize for encoding. * \param ti A theora_info struct filled with the desired encoding parameters. * \retval 0 Success */ extern int theora_encode_init(theora_state *th, theora_info *ti); /** * Submit a YUV buffer to the theora encoder. * \param t A theora_state handle previously initialized for encoding. * \param yuv A buffer of YUV data to encode. Note that both the yuv_buffer * struct and the luma/chroma buffers within should be allocated by * the user. * \retval OC_EINVAL Encoder is not ready, or is finished. * \retval -1 The size of the given frame differs from those previously input * \retval 0 Success */ extern int theora_encode_YUVin(theora_state *t, yuv_buffer *yuv); /** * Request the next packet of encoded video. * The encoded data is placed in a user-provided ogg_packet structure. * \param t A theora_state handle previously initialized for encoding. * \param last_p whether this is the last packet the encoder should produce. * \param op An ogg_packet structure to fill. libtheora will set all * elements of this structure, including a pointer to encoded * data. The memory for the encoded data is owned by libtheora. * \retval 0 No internal storage exists OR no packet is ready * \retval -1 The encoding process has completed * \retval 1 Success */ extern int theora_encode_packetout( theora_state *t, int last_p, ogg_packet *op); /** * Request a packet containing the initial header. * A pointer to the header data is placed in a user-provided ogg_packet * structure. * \param t A theora_state handle previously initialized for encoding. * \param op An ogg_packet structure to fill. libtheora will set all * elements of this structure, including a pointer to the header * data. The memory for the header data is owned by libtheora. * \retval 0 Success */ extern int theora_encode_header(theora_state *t, ogg_packet *op); /** * Request a comment header packet from provided metadata. * A pointer to the comment data is placed in a user-provided ogg_packet * structure. * \param tc A theora_comment structure filled with the desired metadata * \param op An ogg_packet structure to fill. libtheora will set all * elements of this structure, including a pointer to the encoded * comment data. The memory for the comment data is owned by * libtheora. * \retval 0 Success */ extern int theora_encode_comment(theora_comment *tc, ogg_packet *op); /** * Request a packet containing the codebook tables for the stream. * A pointer to the codebook data is placed in a user-provided ogg_packet * structure. * \param t A theora_state handle previously initialized for encoding. * \param op An ogg_packet structure to fill. libtheora will set all * elements of this structure, including a pointer to the codebook * data. The memory for the header data is owned by libtheora. * \retval 0 Success */ extern int theora_encode_tables(theora_state *t, ogg_packet *op); /** * Decode an Ogg packet, with the expectation that the packet contains * an initial header, comment data or codebook tables. * * \param ci A theora_info structure to fill. This must have been previously * initialized with theora_info_init(). If \a op contains an initial * header, theora_decode_header() will fill \a ci with the * parsed header values. If \a op contains codebook tables, * theora_decode_header() will parse these and attach an internal * representation to \a ci->codec_setup. * \param cc A theora_comment structure to fill. If \a op contains comment * data, theora_decode_header() will fill \a cc with the parsed * comments. * \param op An ogg_packet structure which you expect contains an initial * header, comment data or codebook tables. * * \retval OC_BADHEADER \a op is NULL; OR the first byte of \a op->packet * has the signature of an initial packet, but op is * not a b_o_s packet; OR this packet has the signature * of an initial header packet, but an initial header * packet has already been seen; OR this packet has the * signature of a comment packet, but the initial header * has not yet been seen; OR this packet has the signature * of a comment packet, but contains invalid data; OR * this packet has the signature of codebook tables, * but the initial header or comments have not yet * been seen; OR this packet has the signature of codebook * tables, but contains invalid data; * OR the stream being decoded has a compatible version * but this packet does not have the signature of a * theora initial header, comments, or codebook packet * \retval OC_VERSION The packet data of \a op is an initial header with * a version which is incompatible with this version of * libtheora. * \retval OC_NEWPACKET the stream being decoded has an incompatible (future) * version and contains an unknown signature. * \retval 0 Success * * \note The normal usage is that theora_decode_header() be called on the * first three packets of a theora logical bitstream in succession. */ extern int theora_decode_header(theora_info *ci, theora_comment *cc, ogg_packet *op); /** * Initialize a theora_state handle for decoding. * \param th The theora_state handle to initialize. * \param c A theora_info struct filled with the desired decoding parameters. * This is of course usually obtained from a previous call to * theora_decode_header(). * \retval 0 Success */ extern int theora_decode_init(theora_state *th, theora_info *c); /** * Input a packet containing encoded data into the theora decoder. * \param th A theora_state handle previously initialized for decoding. * \param op An ogg_packet containing encoded theora data. * \retval 0 Success * \retval OC_BADPACKET \a op does not contain encoded video data */ extern int theora_decode_packetin(theora_state *th,ogg_packet *op); /** * Output the next available frame of decoded YUV data. * \param th A theora_state handle previously initialized for decoding. * \param yuv A yuv_buffer in which libtheora should place the decoded data. * Note that the buffer struct itself is allocated by the user, but * that the luma and chroma pointers will be filled in by the * library. Also note that these luma and chroma regions should be * considered read-only by the user. * \retval 0 Success */ extern int theora_decode_YUVout(theora_state *th,yuv_buffer *yuv); /** * Report whether a theora packet is a header or not * This function does no verification beyond checking the header * flag bit so it should not be used for bitstream identification; * use theora_decode_header() for that. * * \param op An ogg_packet containing encoded theora data. * \retval 1 The packet is a header packet * \retval 0 The packet is not a header packet (and so contains frame data) * * Thus function was added in the 1.0alpha4 release. */ extern int theora_packet_isheader(ogg_packet *op); /** * Report whether a theora packet is a keyframe or not * * \param op An ogg_packet containing encoded theora data. * \retval 1 The packet contains a keyframe image * \retval 0 The packet is contains an interframe delta * \retval -1 The packet is not an image data packet at all * * Thus function was added in the 1.0alpha4 release. */ extern int theora_packet_iskeyframe(ogg_packet *op); /** * Report the granulepos shift radix * * When embedded in Ogg, Theora uses a two-part granulepos, * splitting the 64-bit field into two pieces. The more-significant * section represents the frame count at the last keyframe, * and the less-significant section represents the count of * frames since the last keyframe. In this way the overall * field is still non-decreasing with time, but usefully encodes * a pointer to the last keyframe, which is necessary for * correctly restarting decode after a seek. * * This function reports the number of bits used to represent * the distance to the last keyframe, and thus how the granulepos * field must be shifted or masked to obtain the two parts. * * Since libtheora returns compressed data in an ogg_packet * structure, this may be generally useful even if the Theora * packets are not being used in an Ogg container. * * \param ti A previously initialized theora_info struct * \returns The bit shift dividing the two granulepos fields * * This function was added in the 1.0alpha5 release. */ int theora_granule_shift(theora_info *ti); /** * Convert a granulepos to an absolute frame index, starting at 0. * The granulepos is interpreted in the context of a given theora_state handle. * * Note that while the granulepos encodes the frame count (i.e. starting * from 1) this call returns the frame index, starting from zero. Thus * One can calculate the presentation time by multiplying the index by * the rate. * * \param th A previously initialized theora_state handle (encode or decode) * \param granulepos The granulepos to convert. * \returns The frame index corresponding to \a granulepos. * \retval -1 The given granulepos is undefined (i.e. negative) * * Thus function was added in the 1.0alpha4 release. */ extern ogg_int64_t theora_granule_frame(theora_state *th,ogg_int64_t granulepos); /** * Convert a granulepos to absolute time in seconds. The granulepos is * interpreted in the context of a given theora_state handle, and gives * the end time of a frame's presentation as used in Ogg mux ordering. * * \param th A previously initialized theora_state handle (encode or decode) * \param granulepos The granulepos to convert. * \returns The absolute time in seconds corresponding to \a granulepos. * This is the "end time" for the frame, or the latest time it should * be displayed. * It is not the presentation time. * \retval -1. The given granulepos is undefined (i.e. negative), or * \retval -1. The function has been disabled because floating * point support is not available. */ extern double theora_granule_time(theora_state *th,ogg_int64_t granulepos); /** * Initialize a theora_info structure. All values within the given theora_info * structure are initialized, and space is allocated within libtheora for * internal codec setup data. * \param c A theora_info struct to initialize. */ extern void theora_info_init(theora_info *c); /** * Clear a theora_info structure. All values within the given theora_info * structure are cleared, and associated internal codec setup data is freed. * \param c A theora_info struct to initialize. */ extern void theora_info_clear(theora_info *c); /** * Free all internal data associated with a theora_state handle. * \param t A theora_state handle. */ extern void theora_clear(theora_state *t); /** * Initialize an allocated theora_comment structure * \param tc An allocated theora_comment structure **/ extern void theora_comment_init(theora_comment *tc); /** * Add a comment to an initialized theora_comment structure * \param tc A previously initialized theora comment structure * \param comment A null-terminated string encoding the comment in the form * "TAG=the value" * * Neither theora_comment_add() nor theora_comment_add_tag() support * comments containing null values, although the bitstream format * supports this. To add such comments you will need to manipulate * the theora_comment structure directly. **/ extern void theora_comment_add(theora_comment *tc, char *comment); /** * Add a comment to an initialized theora_comment structure. * \param tc A previously initialized theora comment structure * \param tag A null-terminated string containing the tag * associated with the comment. * \param value The corresponding value as a null-terminated string * * Neither theora_comment_add() nor theora_comment_add_tag() support * comments containing null values, although the bitstream format * supports this. To add such comments you will need to manipulate * the theora_comment structure directly. **/ extern void theora_comment_add_tag(theora_comment *tc, char *tag, char *value); /** * Look up a comment value by tag. * \param tc Tn initialized theora_comment structure * \param tag The tag to look up * \param count The instance of the tag. The same tag can appear multiple * times, each with a distinct and ordered value, so an index * is required to retrieve them all. * \returns A pointer to the queried tag's value * \retval NULL No matching tag is found * * \note Use theora_comment_query_count() to get the legal range for the * count parameter. **/ extern char *theora_comment_query(theora_comment *tc, char *tag, int count); /** Look up the number of instances of a tag. * \param tc An initialized theora_comment structure * \param tag The tag to look up * \returns The number on instances of a particular tag. * * Call this first when querying for a specific tag and then interate * over the number of instances with separate calls to * theora_comment_query() to retrieve all instances in order. **/ extern int theora_comment_query_count(theora_comment *tc, char *tag); /** * Clear an allocated theora_comment struct so that it can be freed. * \param tc An allocated theora_comment structure. **/ extern void theora_comment_clear(theora_comment *tc); /**Encoder control function. * This is used to provide advanced control the encoding process. * \param th A #theora_state handle. * \param req The control code to process. * See \ref encctlcodes_old "the list of available * control codes" for details. * \param buf The parameters for this control code. * \param buf_sz The size of the parameter buffer.*/ extern int theora_control(theora_state *th,int req,void *buf,size_t buf_sz); /* @} */ /* end oldfuncs doxygen group */ #ifdef __cplusplus } #endif /* __cplusplus */ #endif /* _O_THEORA_H_ */