/* -*- Mode: c++; c-basic-offset: 2; indent-tabs-mode: nil; tab-width: 40 -*- */ /* vim: set ts=2 et sw=2 tw=80: */ /* This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this file, * You can obtain one at http://mozilla.org/MPL/2.0/. */ #include "base/basictypes.h" #include "BluetoothHfpManager.h" #include "BluetoothReplyRunnable.h" #include "BluetoothScoManager.h" #include "BluetoothService.h" #include "BluetoothSocket.h" #include "BluetoothUtils.h" #include "BluetoothUuid.h" #include "MobileConnection.h" #include "mozilla/dom/bluetooth/BluetoothTypes.h" #include "mozilla/Hal.h" #include "mozilla/Services.h" #include "mozilla/StaticPtr.h" #include "nsContentUtils.h" #include "nsIAudioManager.h" #include "nsIObserverService.h" #include "nsISettingsService.h" #include "nsITelephonyProvider.h" #include "nsRadioInterfaceLayer.h" #define AUDIO_VOLUME_BT_SCO "audio.volume.bt_sco" #define MOZSETTINGS_CHANGED_ID "mozsettings-changed" #define MOBILE_CONNECTION_ICCINFO_CHANGED "mobile-connection-iccinfo-changed" #define MOBILE_CONNECTION_VOICE_CHANGED "mobile-connection-voice-changed" /** * These constants are used in result code such as +CLIP and +CCWA. The value * of these constants is the same as TOA_INTERNATIONAL/TOA_UNKNOWN defined in * ril_consts.js */ #define TOA_UNKNOWN 0x81 #define TOA_INTERNATIONAL 0x91 #define CR_LF "\xd\xa"; using namespace mozilla; using namespace mozilla::ipc; USING_BLUETOOTH_NAMESPACE namespace { StaticAutoPtr gBluetoothHfpManager; StaticRefPtr sHfpObserver; bool gInShutdown = false; static bool sStopSendingRingFlag = true; static int sRingInterval = 3000; //unit: ms static const char kHfpCrlf[] = "\xd\xa"; } // anonymous namespace /* CallState for sCINDItems[CINDType::CALL].value * - NO_CALL: there are no calls in progress * - IN_PROGRESS: at least one call is in progress */ enum CallState { NO_CALL, IN_PROGRESS }; /* CallSetupState for sCINDItems[CINDType::CALLSETUP].value * - NO_CALLSETUP: not currently in call set up * - INCOMING: an incoming call process ongoing * - OUTGOING: an outgoing call set up is ongoing * - OUTGOING_ALERTING: remote party being alerted in an outgoing call */ enum CallSetupState { NO_CALLSETUP, INCOMING, OUTGOING, OUTGOING_ALERTING }; /* CallHeldState for sCINDItems[CINDType::CALLHELD].value * - NO_CALLHELD: no calls held * - ONHOLD_ACTIVE: both an active and a held call * - ONHOLD_NOACTIVE: call on hold, no active call */ enum CallHeldState { NO_CALLHELD, ONHOLD_ACTIVE, ONHOLD_NOACTIVE }; typedef struct { const char* name; const char* range; int value; } CINDItem; enum CINDType { BATTCHG = 1, CALL, CALLHELD, CALLSETUP, SERVICE, SIGNAL, ROAM }; static CINDItem sCINDItems[] = { {}, {"battchg", "0-5", 5}, {"call", "0,1", CallState::NO_CALL}, {"callheld", "0-2", CallHeldState::NO_CALLHELD}, {"callsetup", "0-3", CallSetupState::NO_CALLSETUP}, {"service", "0,1", 0}, {"signal", "0-5", 0}, {"roam", "0,1", 0} }; class mozilla::dom::bluetooth::Call { public: Call(uint16_t aState = nsITelephonyProvider::CALL_STATE_DISCONNECTED, bool aDirection = false, const nsAString& aNumber = NS_LITERAL_STRING(""), int aType = TOA_UNKNOWN) : mState(aState), mDirection(aDirection), mNumber(aNumber), mType(aType) { } uint16_t mState; bool mDirection; // true: incoming call; false: outgoing call nsString mNumber; int mType; }; class mozilla::dom::bluetooth::BluetoothHfpManagerObserver : public nsIObserver , public BatteryObserver { public: NS_DECL_ISUPPORTS NS_DECL_NSIOBSERVER BluetoothHfpManagerObserver() { } bool Init() { nsCOMPtr obs = services::GetObserverService(); MOZ_ASSERT(obs); if (NS_FAILED(obs->AddObserver(this, MOZSETTINGS_CHANGED_ID, false))) { NS_WARNING("Failed to add settings change observer!"); return false; } if (NS_FAILED(obs->AddObserver(this, NS_XPCOM_SHUTDOWN_OBSERVER_ID, false))) { NS_WARNING("Failed to add shutdown observer!"); return false; } if (NS_FAILED(obs->AddObserver(this, MOBILE_CONNECTION_ICCINFO_CHANGED, false))) { NS_WARNING("Failed to add mobile connection iccinfo change observer!"); return false; } if (NS_FAILED(obs->AddObserver(this, MOBILE_CONNECTION_VOICE_CHANGED, false))) { NS_WARNING("Failed to add mobile connection voice change observer!"); return false; } hal::RegisterBatteryObserver(this); return true; } bool Shutdown() { nsCOMPtr obs = services::GetObserverService(); if (!obs || NS_FAILED(obs->RemoveObserver(this, NS_XPCOM_SHUTDOWN_OBSERVER_ID)) || NS_FAILED(obs->RemoveObserver(this, MOZSETTINGS_CHANGED_ID)) || NS_FAILED(obs->RemoveObserver(this, MOBILE_CONNECTION_ICCINFO_CHANGED)) || NS_FAILED(obs->RemoveObserver(this, MOBILE_CONNECTION_VOICE_CHANGED))) { NS_WARNING("Can't unregister observers, or already unregistered!"); return false; } hal::UnregisterBatteryObserver(this); return true; } ~BluetoothHfpManagerObserver() { Shutdown(); } void Notify(const hal::BatteryInformation& aBatteryInfo) { // Range of battery level: [0, 1], double // Range of CIND::BATTCHG: [0, 5], int int level = ceil(aBatteryInfo.level() * 5.0); if (level != sCINDItems[CINDType::BATTCHG].value) { sCINDItems[CINDType::BATTCHG].value = level; gBluetoothHfpManager->SendCommand("+CIEV: ", CINDType::BATTCHG); } } }; class BluetoothHfpManager::GetVolumeTask : public nsISettingsServiceCallback { public: NS_DECL_ISUPPORTS NS_IMETHOD Handle(const nsAString& aName, const JS::Value& aResult) { MOZ_ASSERT(NS_IsMainThread()); JSContext *cx = nsContentUtils::GetCurrentJSContext(); NS_ENSURE_TRUE(cx, NS_OK); if (!aResult.isNumber()) { NS_WARNING("'" AUDIO_VOLUME_BT_SCO "' is not a number!"); return NS_OK; } BluetoothHfpManager* hfp = BluetoothHfpManager::Get(); hfp->mCurrentVgs = aResult.toNumber(); return NS_OK; } NS_IMETHOD HandleError(const nsAString& aName) { NS_WARNING("Unable to get value for '" AUDIO_VOLUME_BT_SCO "'"); return NS_OK; } }; NS_IMPL_ISUPPORTS1(BluetoothHfpManager::GetVolumeTask, nsISettingsServiceCallback); NS_IMETHODIMP BluetoothHfpManagerObserver::Observe(nsISupports* aSubject, const char* aTopic, const PRUnichar* aData) { MOZ_ASSERT(gBluetoothHfpManager); if (!strcmp(aTopic, MOZSETTINGS_CHANGED_ID)) { return gBluetoothHfpManager->HandleVolumeChanged(nsDependentString(aData)); } else if (!strcmp(aTopic, NS_XPCOM_SHUTDOWN_OBSERVER_ID)) { return gBluetoothHfpManager->HandleShutdown(); } else if (!strcmp(aTopic, MOBILE_CONNECTION_ICCINFO_CHANGED)) { return gBluetoothHfpManager->HandleIccInfoChanged(); } else if (!strcmp(aTopic, MOBILE_CONNECTION_VOICE_CHANGED)) { return gBluetoothHfpManager->HandleVoiceConnectionChanged(); } MOZ_ASSERT(false, "BluetoothHfpManager got unexpected topic!"); return NS_ERROR_UNEXPECTED; } NS_IMPL_ISUPPORTS1(BluetoothHfpManagerObserver, nsIObserver) class BluetoothHfpManager::SendRingIndicatorTask : public Task { public: SendRingIndicatorTask(const nsAString& aNumber, int aType) : mNumber(aNumber) , mType(aType) { MOZ_ASSERT(NS_IsMainThread()); } void Run() MOZ_OVERRIDE { MOZ_ASSERT(NS_IsMainThread()); // Stop sending RING indicator if (sStopSendingRingFlag) { return; } if (!gBluetoothHfpManager) { NS_WARNING("BluetoothHfpManager no longer exists, cannot send ring!"); return; } nsAutoCString ringMsg(kHfpCrlf); ringMsg.AppendLiteral("RING"); ringMsg.AppendLiteral(kHfpCrlf); gBluetoothHfpManager->SendLine(ringMsg.get()); if (!mNumber.IsEmpty()) { nsAutoCString clipMsg(kHfpCrlf); clipMsg.AppendLiteral("+CLIP: \""); clipMsg.Append(NS_ConvertUTF16toUTF8(mNumber).get()); clipMsg.AppendLiteral("\","); clipMsg.AppendInt(mType); clipMsg.AppendLiteral(kHfpCrlf); gBluetoothHfpManager->SendLine(clipMsg.get()); } MessageLoop::current()-> PostDelayedTask(FROM_HERE, new SendRingIndicatorTask(mNumber, mType), sRingInterval); } private: nsString mNumber; int mType; }; void OpenScoSocket(const nsAString& aDeviceAddress) { MOZ_ASSERT(NS_IsMainThread()); BluetoothScoManager* sco = BluetoothScoManager::Get(); if (!sco) { NS_WARNING("BluetoothScoManager is not available!"); return; } if (!sco->Connect(aDeviceAddress)) { NS_WARNING("Failed to create a sco socket!"); } } void CloseScoSocket() { MOZ_ASSERT(NS_IsMainThread()); BluetoothScoManager* sco = BluetoothScoManager::Get(); if (!sco) { NS_WARNING("BluetoothScoManager is not available!"); return; } sco->Disconnect(); } static bool IsValidDtmf(const char aChar) { // Valid DTMF: [*#0-9ABCD] if (aChar == '*' || aChar == '#') { return true; } else if (aChar >= '0' && aChar <= '9') { return true; } else if (aChar >= 'A' && aChar <= 'D') { return true; } return false; } BluetoothHfpManager::BluetoothHfpManager() { Reset(); } void BluetoothHfpManager::ResetCallArray() { mCurrentCallIndex = 0; mCurrentCallArray.Clear(); // Append a call object at the beginning of mCurrentCallArray since call // index from RIL starts at 1. Call call; mCurrentCallArray.AppendElement(call); } void BluetoothHfpManager::Reset() { sStopSendingRingFlag = true; sCINDItems[CINDType::CALL].value = CallState::NO_CALL; sCINDItems[CINDType::CALLSETUP].value = CallSetupState::NO_CALLSETUP; sCINDItems[CINDType::CALLHELD].value = CallHeldState::NO_CALLHELD; mCCWA = false; mCLIP = false; mCMEE = false; mCMER = false; mReceiveVgsFlag = false; ResetCallArray(); } bool BluetoothHfpManager::Init() { MOZ_ASSERT(NS_IsMainThread()); sHfpObserver = new BluetoothHfpManagerObserver(); if (!sHfpObserver->Init()) { NS_WARNING("Cannot set up Hfp Observers!"); } mListener = new BluetoothTelephonyListener(); if (!mListener->StartListening()) { NS_WARNING("Failed to start listening RIL"); return false; } nsCOMPtr settings = do_GetService("@mozilla.org/settingsService;1"); NS_ENSURE_TRUE(settings, false); nsCOMPtr settingsLock; nsresult rv = settings->CreateLock(getter_AddRefs(settingsLock)); NS_ENSURE_SUCCESS(rv, false); nsRefPtr callback = new GetVolumeTask(); rv = settingsLock->Get(AUDIO_VOLUME_BT_SCO, callback); NS_ENSURE_SUCCESS(rv, false); Listen(); return true; } BluetoothHfpManager::~BluetoothHfpManager() { Cleanup(); } void BluetoothHfpManager::Cleanup() { if (!mListener->StopListening()) { NS_WARNING("Failed to stop listening RIL"); } mListener = nullptr; sHfpObserver->Shutdown(); sHfpObserver = nullptr; } //static BluetoothHfpManager* BluetoothHfpManager::Get() { MOZ_ASSERT(NS_IsMainThread()); // If we already exist, exit early if (gBluetoothHfpManager) { return gBluetoothHfpManager; } // If we're in shutdown, don't create a new instance if (gInShutdown) { NS_WARNING("BluetoothHfpManager can't be created during shutdown"); return nullptr; } // Create new instance, register, return BluetoothHfpManager* manager = new BluetoothHfpManager(); NS_ENSURE_TRUE(manager->Init(), nullptr); gBluetoothHfpManager = manager; return gBluetoothHfpManager; } void BluetoothHfpManager::NotifySettings() { nsString type, name; BluetoothValue v; InfallibleTArray parameters; type.AssignLiteral("bluetooth-hfp-status-changed"); name.AssignLiteral("connected"); v = IsConnected(); parameters.AppendElement(BluetoothNamedValue(name, v)); name.AssignLiteral("address"); v = mDevicePath; parameters.AppendElement(BluetoothNamedValue(name, v)); if (!BroadcastSystemMessage(type, parameters)) { NS_WARNING("Failed to broadcast system message to settings"); return; } } void BluetoothHfpManager::NotifyDialer(const nsAString& aCommand) { nsString type, name; BluetoothValue v; InfallibleTArray parameters; type.AssignLiteral("bluetooth-dialer-command"); name.AssignLiteral("command"); v = nsString(aCommand); parameters.AppendElement(BluetoothNamedValue(name, v)); if (!BroadcastSystemMessage(type, parameters)) { NS_WARNING("Failed to broadcast system message to dialer"); return; } } nsresult BluetoothHfpManager::HandleVolumeChanged(const nsAString& aData) { MOZ_ASSERT(NS_IsMainThread()); // The string that we're interested in will be a JSON string that looks like: // {"key":"volumeup", "value":10} // {"key":"volumedown", "value":2} JSContext* cx = nsContentUtils::GetSafeJSContext(); if (!cx) { NS_WARNING("Failed to get JSContext"); return NS_OK; } JS::Value val; if (!JS_ParseJSON(cx, aData.BeginReading(), aData.Length(), &val)) { return JS_ReportPendingException(cx) ? NS_OK : NS_ERROR_OUT_OF_MEMORY; } if (!val.isObject()) { return NS_OK; } JSObject& obj(val.toObject()); JS::Value key; if (!JS_GetProperty(cx, &obj, "key", &key)) { MOZ_ASSERT(!JS_IsExceptionPending(cx)); return NS_ERROR_OUT_OF_MEMORY; } if (!key.isString()) { return NS_OK; } JSBool match; if (!JS_StringEqualsAscii(cx, key.toString(), AUDIO_VOLUME_BT_SCO, &match)) { MOZ_ASSERT(!JS_IsExceptionPending(cx)); return NS_ERROR_OUT_OF_MEMORY; } if (!match) { return NS_OK; } JS::Value value; if (!JS_GetProperty(cx, &obj, "value", &value)) { MOZ_ASSERT(!JS_IsExceptionPending(cx)); return NS_ERROR_OUT_OF_MEMORY; } if (!value.isNumber()) { return NS_ERROR_UNEXPECTED; } mCurrentVgs = value.toNumber(); // Adjust volume by headset and we don't have to send volume back to headset if (mReceiveVgsFlag) { mReceiveVgsFlag = false; return NS_OK; } // Only send volume back when there's a connected headset if (IsConnected()) { SendCommand("+VGS: ", mCurrentVgs); } return NS_OK; } nsresult BluetoothHfpManager::HandleVoiceConnectionChanged() { nsCOMPtr connection = do_GetService(NS_RILCONTENTHELPER_CONTRACTID); NS_ENSURE_TRUE(connection, NS_ERROR_FAILURE); nsIDOMMozMobileConnectionInfo* voiceInfo; connection->GetVoiceConnectionInfo(&voiceInfo); NS_ENSURE_TRUE(voiceInfo, NS_ERROR_FAILURE); bool roaming; voiceInfo->GetRoaming(&roaming); if (roaming != sCINDItems[CINDType::ROAM].value) { sCINDItems[CINDType::ROAM].value = roaming; SendCommand("+CIEV: ", CINDType::ROAM); } bool service = false; nsString regState; voiceInfo->GetState(regState); if (regState.EqualsLiteral("registered")) { service = true; } if (service != sCINDItems[CINDType::SERVICE].value) { sCINDItems[CINDType::SERVICE].value = service; SendCommand("+CIEV: ", CINDType::SERVICE); } uint8_t signal; JS::Value value; voiceInfo->GetRelSignalStrength(&value); if (!value.isNumber()) { NS_WARNING("Failed to get relSignalStrength in BluetoothHfpManager"); return NS_ERROR_FAILURE; } signal = ceil(value.toNumber() / 20.0); if (signal != sCINDItems[CINDType::SIGNAL].value) { sCINDItems[CINDType::SIGNAL].value = signal; SendCommand("+CIEV: ", CINDType::SIGNAL); } /** * Possible return values for mode are: * - null (unknown): set mNetworkSelectionMode to 0 (auto) * - automatic: set mNetworkSelectionMode to 0 (auto) * - manual: set mNetworkSelectionMode to 1 (manual) */ nsString mode; connection->GetNetworkSelectionMode(mode); if (mode.EqualsLiteral("manual")) { mNetworkSelectionMode = 1; } else { mNetworkSelectionMode = 0; } nsIDOMMozMobileNetworkInfo* network; voiceInfo->GetNetwork(&network); NS_ENSURE_TRUE(network, NS_ERROR_FAILURE); network->GetLongName(mOperatorName); return NS_OK; } nsresult BluetoothHfpManager::HandleIccInfoChanged() { nsCOMPtr connection = do_GetService(NS_RILCONTENTHELPER_CONTRACTID); NS_ENSURE_TRUE(connection, NS_ERROR_FAILURE); nsIDOMMozMobileICCInfo* iccInfo; connection->GetIccInfo(&iccInfo); NS_ENSURE_TRUE(iccInfo, NS_ERROR_FAILURE); iccInfo->GetMsisdn(mMsisdn); return NS_OK; } nsresult BluetoothHfpManager::HandleShutdown() { MOZ_ASSERT(NS_IsMainThread()); gInShutdown = true; Disconnect(); gBluetoothHfpManager = nullptr; return NS_OK; } // Virtual function of class SocketConsumer void BluetoothHfpManager::ReceiveSocketData(BluetoothSocket* aSocket, nsAutoPtr& aMessage) { MOZ_ASSERT(NS_IsMainThread()); MOZ_ASSERT(aSocket); nsAutoCString msg((const char*)aMessage->mData.get(), aMessage->mSize); msg.StripWhitespace(); nsTArray atCommandValues; // For more information, please refer to 4.34.1 "Bluetooth Defined AT // Capabilities" in Bluetooth hands-free profile 1.6 if (msg.Find("AT+BRSF=") != -1) { SendCommand("+BRSF: ", 97); } else if (msg.Find("AT+CIND=?") != -1) { // Asking for CIND range SendCommand("+CIND: ", 0); } else if (msg.Find("AT+CIND?") != -1) { // Asking for CIND value SendCommand("+CIND: ", 1); } else if (msg.Find("AT+CMER=") != -1) { /** * SLC establishment is done when AT+CMER has been received. * Do nothing but respond with "OK". */ ParseAtCommand(msg, 8, atCommandValues); if (atCommandValues.Length() < 4) { NS_WARNING("Could't get the value of command [AT+CMER=]"); goto respond_with_ok; } if (!atCommandValues[0].EqualsLiteral("3") || !atCommandValues[1].EqualsLiteral("0") || !atCommandValues[2].EqualsLiteral("0")) { NS_WARNING("Wrong value of CMER"); goto respond_with_ok; } mCMER = atCommandValues[3].EqualsLiteral("1"); } else if (msg.Find("AT+CMEE=") != -1) { ParseAtCommand(msg, 8, atCommandValues); if (atCommandValues.IsEmpty()) { NS_WARNING("Could't get the value of command [AT+CMEE=]"); goto respond_with_ok; } // AT+CMEE = 0: +CME ERROR shall not be used // AT+CMEE = 1: use numeric // AT+CMEE = 2: use verbose mCMEE = !atCommandValues[0].EqualsLiteral("0"); } else if (msg.Find("AT+COPS=") != -1) { ParseAtCommand(msg, 8, atCommandValues); if (atCommandValues.Length() != 2) { NS_WARNING("Could't get the value of command [AT+COPS=]"); goto respond_with_ok; } // Handsfree only support AT+COPS=3,0 if (!atCommandValues[0].EqualsLiteral("3") || !atCommandValues[1].EqualsLiteral("0")) { if (mCMEE) { SendCommand("+CME ERROR: ", BluetoothCmeError::OPERATION_NOT_SUPPORTED); } else { SendLine("ERROR"); } return; } } else if (msg.Find("AT+COPS?") != -1) { nsAutoCString message("+COPS: "); message.AppendInt(mNetworkSelectionMode); message.AppendLiteral(",0,\""); message.Append(NS_ConvertUTF16toUTF8(mOperatorName)); message.AppendLiteral("\""); SendLine(message.get()); return; } else if (msg.Find("AT+VTS=") != -1) { ParseAtCommand(msg, 7, atCommandValues); if (atCommandValues.Length() != 1) { NS_WARNING("Couldn't get the value of command [AT+VTS=]"); goto respond_with_ok; } if (IsValidDtmf(atCommandValues[0].get()[0])) { nsAutoCString message("VTS="); message += atCommandValues[0].get()[0]; NotifyDialer(NS_ConvertUTF8toUTF16(message)); } } else if (msg.Find("AT+VGM=") != -1) { ParseAtCommand(msg, 7, atCommandValues); if (atCommandValues.IsEmpty()) { NS_WARNING("Couldn't get the value of command [AT+VGM]"); goto respond_with_ok; } nsresult rv; int vgm = atCommandValues[0].ToInteger(&rv); if (NS_FAILED(rv)) { NS_WARNING("Failed to extract microphone volume from bluetooth headset!"); goto respond_with_ok; } NS_ASSERTION(vgm >= 0 && vgm <= 15, "Received invalid VGM value"); mCurrentVgm = vgm; } else if (msg.Find("AT+CHLD=?") != -1) { SendLine("+CHLD: (1,2)"); } else if (msg.Find("AT+CHLD=") != -1) { ParseAtCommand(msg, 8, atCommandValues); if (atCommandValues.IsEmpty()) { NS_WARNING("Could't get the value of command [AT+CHLD=]"); goto respond_with_ok; } /** * The following two cases are supported: * AT+CHLD=1 - Releases active calls and accepts the other (held or * waiting) call * AT+CHLD=2 - Places active calls on hold and accepts the other (held * or waiting) call * * The following cases are NOT supported yet: * AT+CHLD=0, AT+CHLD=1, AT+CHLD=2, AT+CHLD=3, AT+CHLD=4 * Please see 4.33.2 in Bluetooth hands-free profile 1.6 for more * information. */ char chld = atCommandValues[0][0]; bool valid = true; if (atCommandValues[0].Length() > 1) { NS_WARNING("No index should be included in command [AT+CHLD]"); valid = false; } else if (chld == '0' || chld == '3' || chld == '4') { NS_WARNING("The value of command [AT+CHLD] is not supported"); valid = false; } else if (chld == '1') { NotifyDialer(NS_LITERAL_STRING("CHUP+ATA")); } else if (chld == '2') { NotifyDialer(NS_LITERAL_STRING("CHLD+ATA")); } else { NS_WARNING("Wrong value of command [AT+CHLD]"); valid = false; } if (!valid) { SendLine("ERROR"); return; } } else if (msg.Find("AT+VGS=") != -1) { // Adjust volume by headset mReceiveVgsFlag = true; ParseAtCommand(msg, 7, atCommandValues); if (atCommandValues.IsEmpty()) { NS_WARNING("Could't get the value of command [AT+VGS=]"); goto respond_with_ok; } nsresult rv; int newVgs = atCommandValues[0].ToInteger(&rv); if (NS_FAILED(rv)) { NS_WARNING("Failed to extract volume value from bluetooth headset!"); goto respond_with_ok; } if (newVgs == mCurrentVgs) { goto respond_with_ok; } NS_ASSERTION(newVgs >= 0 && newVgs <= 15, "Received invalid VGS value"); nsString data; nsCOMPtr os = mozilla::services::GetObserverService(); data.AppendInt(newVgs); os->NotifyObservers(nullptr, "bluetooth-volume-change", data.get()); } else if (msg.Find("AT+BLDN") != -1) { NotifyDialer(NS_LITERAL_STRING("BLDN")); } else if (msg.Find("ATA") != -1) { NotifyDialer(NS_LITERAL_STRING("ATA")); } else if (msg.Find("AT+CHUP") != -1) { NotifyDialer(NS_LITERAL_STRING("CHUP")); } else if (msg.Find("ATD>") != -1) { // Currently, we don't support memory dialing in Dialer app SendLine("ERROR"); return; } else if (msg.Find("AT+CLCC") != -1) { SendCommand("+CLCC: "); } else if (msg.Find("ATD") != -1) { nsAutoCString message(msg), newMsg; int end = message.FindChar(';'); if (end < 0) { NS_WARNING("Could't get the value of command [ATD]"); goto respond_with_ok; } newMsg += nsDependentCSubstring(message, 0, end); NotifyDialer(NS_ConvertUTF8toUTF16(newMsg)); } else if (msg.Find("AT+CLIP=") != -1) { ParseAtCommand(msg, 8, atCommandValues); if (atCommandValues.IsEmpty()) { NS_WARNING("Could't get the value of command [AT+CLIP=]"); goto respond_with_ok; } mCLIP = atCommandValues[0].EqualsLiteral("1"); } else if (msg.Find("AT+CCWA=") != -1) { ParseAtCommand(msg, 8, atCommandValues); if (atCommandValues.IsEmpty()) { NS_WARNING("Could't get the value of command [AT+CCWA=]"); goto respond_with_ok; } mCCWA = atCommandValues[0].EqualsLiteral("1"); } else if (msg.Find("AT+CKPD") != -1) { BluetoothScoManager* sco = BluetoothScoManager::Get(); if (!sco) { NS_WARNING("Couldn't get BluetoothScoManager instance"); goto respond_with_ok; } if (!sStopSendingRingFlag) { // Bluetooth HSP spec 4.2.2 // There is an incoming call, notify Dialer to pick up the phone call // and SCO will be established after we get the CallStateChanged event // indicating the call is answered successfully. NotifyDialer(NS_LITERAL_STRING("ATA")); } else { if (!sco->IsConnected()) { // Bluetooth HSP spec 4.3 // If there's no SCO, set up a SCO link. nsAutoString address; mSocket->GetAddress(address); sco->Connect(address); } else if (!mFirstCKPD) { // Bluetooth HSP spec 4.5 // There are two ways to release SCO: sending CHUP to dialer or closing // SCO socket directly. We notify dialer only if there is at least one // active call. if (mCurrentCallArray.Length() > 1) { NotifyDialer(NS_LITERAL_STRING("CHUP")); } else { sco->Disconnect(); } } else { // Three conditions have to be matched to come in here: // (1) Not sending RING indicator // (2) A SCO link exists // (3) This is the very first AT+CKPD=200 of this session // It is the case of Figure 4.3, Bluetooth HSP spec. Do nothing. NS_WARNING("AT+CKPD=200: Do nothing"); } } mFirstCKPD = false; } else if (msg.Find("AT+CNUM") != -1) { if (!mMsisdn.IsEmpty()) { nsAutoCString message("+CNUM: ,\""); message.Append(NS_ConvertUTF16toUTF8(mMsisdn).get()); message.AppendLiteral("\","); message.AppendInt(TOA_UNKNOWN); message.AppendLiteral(",,4"); SendLine(message.get()); } } else { nsCString warningMsg; warningMsg.Append(NS_LITERAL_CSTRING("Unsupported AT command: ")); warningMsg.Append(msg); warningMsg.Append(NS_LITERAL_CSTRING(", reply with ERROR")); NS_WARNING(warningMsg.get()); SendLine("ERROR"); return; } respond_with_ok: // We always respond to remote device with "OK" in general cases. SendLine("OK"); } bool BluetoothHfpManager::Connect(const nsAString& aDevicePath, const bool aIsHandsfree, BluetoothReplyRunnable* aRunnable) { MOZ_ASSERT(NS_IsMainThread()); if (gInShutdown) { NS_WARNING("Connect called while in shutdown!"); return false; } if (mSocket) { NS_WARNING("BluetoothHfpManager has been already connected"); return false; } // Stop listening because currently we only support one connection at a time. if (mHandsfreeSocket) { mHandsfreeSocket->Disconnect(); mHandsfreeSocket = nullptr; } if (mHeadsetSocket) { mHeadsetSocket->Disconnect(); mHeadsetSocket = nullptr; } BluetoothService* bs = BluetoothService::Get(); NS_ENSURE_TRUE(bs, false); nsString uuid; if (aIsHandsfree) { BluetoothUuidHelper::GetString(BluetoothServiceClass::HANDSFREE, uuid); } else { BluetoothUuidHelper::GetString(BluetoothServiceClass::HEADSET, uuid); } mRunnable = aRunnable; mSocket = new BluetoothSocket(this, BluetoothSocketType::RFCOMM, true, true); nsresult rv = bs->GetSocketViaService(aDevicePath, uuid, BluetoothSocketType::RFCOMM, true, true, mSocket, mRunnable); return NS_FAILED(rv) ? false : true; } bool BluetoothHfpManager::Listen() { MOZ_ASSERT(NS_IsMainThread()); if (gInShutdown) { MOZ_ASSERT(false, "Listen called while in shutdown!"); return false; } if (mSocket) { NS_WARNING("mSocket exists. Failed to listen."); return false; } if (!mHandsfreeSocket) { mHandsfreeSocket = new BluetoothSocket(this, BluetoothSocketType::RFCOMM, true, true); if (!mHandsfreeSocket->Listen( BluetoothReservedChannels::CHANNEL_HANDSFREE_AG)) { NS_WARNING("[HFP] Can't listen on RFCOMM socket!"); mHandsfreeSocket = nullptr; return false; } } if (!mHeadsetSocket) { mHeadsetSocket = new BluetoothSocket(this, BluetoothSocketType::RFCOMM, true, true); if (!mHeadsetSocket->Listen( BluetoothReservedChannels::CHANNEL_HEADSET_AG)) { NS_WARNING("[HSP] Can't listen on RFCOMM socket!"); mHandsfreeSocket->Disconnect(); mHandsfreeSocket = nullptr; mHeadsetSocket = nullptr; return false; } } return true; } void BluetoothHfpManager::Disconnect() { if (mSocket) { mSocket->Disconnect(); mSocket = nullptr; } } bool BluetoothHfpManager::SendLine(const char* aMessage) { MOZ_ASSERT(mSocket); nsAutoCString msg; msg.AppendLiteral(kHfpCrlf); msg.Append(aMessage); msg.AppendLiteral(kHfpCrlf); return mSocket->SendSocketData(msg); } bool BluetoothHfpManager::SendCommand(const char* aCommand, uint8_t aValue) { if (!IsConnected()) { NS_WARNING("Trying to SendCommand() without a SLC"); return false; } nsAutoCString message; int value = aValue; message += aCommand; if (!strcmp(aCommand, "+CIEV: ")) { if (!mCMER) { // Indicator status update is disabled return true; } if ((aValue < 1) || (aValue > ArrayLength(sCINDItems) - 1)) { NS_WARNING("unexpected CINDType for CIEV command"); return false; } message.AppendInt(aValue); message.AppendLiteral(","); message.AppendInt(sCINDItems[aValue].value); } else if (!strcmp(aCommand, "+CIND: ")) { if (!aValue) { // Query for range for (uint8_t i = 1; i < ArrayLength(sCINDItems); i++) { message.AppendLiteral("(\""); message.Append(sCINDItems[i].name); message.AppendLiteral("\",("); message.Append(sCINDItems[i].range); message.AppendLiteral(")"); if (i == (ArrayLength(sCINDItems) - 1)) { message.AppendLiteral(")"); break; } message.AppendLiteral("),"); } } else { // Query for value for (uint8_t i = 1; i < ArrayLength(sCINDItems); i++) { message.AppendInt(sCINDItems[i].value); if (i == (ArrayLength(sCINDItems) - 1)) { break; } message.AppendLiteral(","); } } } else if (!strcmp(aCommand, "+CLCC: ")) { bool rv = true; uint32_t callNumbers = mCurrentCallArray.Length(); for (uint32_t i = 1; i < callNumbers; i++) { Call& call = mCurrentCallArray[i]; if (call.mState == nsITelephonyProvider::CALL_STATE_DISCONNECTED) { continue; } message.AssignLiteral("+CLCC: "); message.AppendInt(i); message.AppendLiteral(","); message.AppendInt(call.mDirection); message.AppendLiteral(","); switch (call.mState) { case nsITelephonyProvider::CALL_STATE_CONNECTED: message.AppendInt(0); break; case nsITelephonyProvider::CALL_STATE_HELD: message.AppendInt(1); break; case nsITelephonyProvider::CALL_STATE_DIALING: message.AppendInt(2); break; case nsITelephonyProvider::CALL_STATE_ALERTING: message.AppendInt(3); break; case nsITelephonyProvider::CALL_STATE_INCOMING: message.AppendInt((i == mCurrentCallIndex) ? 4 : 5); break; default: NS_WARNING("Not handling call status for CLCC"); break; } message.AppendLiteral(",0,0,\""); message.Append(NS_ConvertUTF16toUTF8(call.mNumber)); message.AppendLiteral("\","); message.AppendInt(call.mType); rv &= SendLine(message.get()); } return rv; } else { message.AppendInt(value); } return SendLine(message.get()); } void BluetoothHfpManager::UpdateCIND(uint8_t aType, uint8_t aValue, bool aSend) { if (sCINDItems[aType].value != aValue) { sCINDItems[aType].value = aValue; // Indicator status update is enabled if (aSend && mCMER) { SendCommand("+CIEV: ", aType); } } } void BluetoothHfpManager::HandleCallStateChanged(uint32_t aCallIndex, uint16_t aCallState, const nsAString& aNumber, bool aSend) { if (!IsConnected()) { // Normal case. No need to print out warnings. return; } while (aCallIndex >= mCurrentCallArray.Length()) { Call call; mCurrentCallArray.AppendElement(call); } uint16_t prevCallState = mCurrentCallArray[aCallIndex].mState; mCurrentCallArray[aCallIndex].mState = aCallState; // Same logic as implementation in ril_worker.js if (aNumber.Length() && aNumber[0] == '+') { mCurrentCallArray[aCallIndex].mType = TOA_INTERNATIONAL; } mCurrentCallArray[aCallIndex].mNumber = aNumber; nsRefPtr sendRingTask; nsString address; uint32_t callArrayLength = mCurrentCallArray.Length(); uint32_t index = 1; switch (aCallState) { case nsITelephonyProvider::CALL_STATE_HELD: sCINDItems[CINDType::CALLHELD].value = CallHeldState::ONHOLD_ACTIVE; SendCommand("+CIEV: ", CINDType::CALLHELD); break; case nsITelephonyProvider::CALL_STATE_INCOMING: mCurrentCallArray[aCallIndex].mDirection = true; if (mCurrentCallIndex) { if (mCCWA) { nsAutoCString ccwaMsg("+CCWA: \""); ccwaMsg.Append(NS_ConvertUTF16toUTF8(aNumber)); ccwaMsg.AppendLiteral("\","); ccwaMsg.AppendInt(mCurrentCallArray[aCallIndex].mType); SendLine(ccwaMsg.get()); } UpdateCIND(CINDType::CALLSETUP, CallSetupState::INCOMING, aSend); } else { // Start sending RING indicator to HF sStopSendingRingFlag = false; UpdateCIND(CINDType::CALLSETUP, CallSetupState::INCOMING, aSend); nsAutoString number(aNumber); if (!mCLIP) { number.AssignLiteral(""); } MessageLoop::current()->PostDelayedTask( FROM_HERE, new SendRingIndicatorTask(number, mCurrentCallArray[aCallIndex].mType), sRingInterval); } break; case nsITelephonyProvider::CALL_STATE_DIALING: mCurrentCallArray[aCallIndex].mDirection = false; UpdateCIND(CINDType::CALLSETUP, CallSetupState::OUTGOING, aSend); mSocket->GetAddress(address); OpenScoSocket(address); break; case nsITelephonyProvider::CALL_STATE_ALERTING: mCurrentCallArray[aCallIndex].mDirection = false; UpdateCIND(CINDType::CALLSETUP, CallSetupState::OUTGOING_ALERTING, aSend); // If there's an ongoing call when the headset is just connected, we have // to open a sco socket here. mSocket->GetAddress(address); OpenScoSocket(address); break; case nsITelephonyProvider::CALL_STATE_CONNECTED: mCurrentCallIndex = aCallIndex; switch (prevCallState) { case nsITelephonyProvider::CALL_STATE_INCOMING: case nsITelephonyProvider::CALL_STATE_DISCONNECTED: // Incoming call, no break sStopSendingRingFlag = true; mSocket->GetAddress(address); OpenScoSocket(address); case nsITelephonyProvider::CALL_STATE_ALERTING: // Outgoing call UpdateCIND(CINDType::CALL, CallState::IN_PROGRESS, aSend); UpdateCIND(CINDType::CALLSETUP, CallSetupState::NO_CALLSETUP, aSend); break; case nsITelephonyProvider::CALL_STATE_HELD: // Check whether to update CINDType::CALLHELD or not while (index < callArrayLength) { if (index == mCurrentCallIndex) { index++; continue; } uint16_t state = mCurrentCallArray[index].mState; // If there's another call on hold or other calls exist, no need to // update CINDType::CALLHELD if (state != nsITelephonyProvider::CALL_STATE_DISCONNECTED) { break; } index++; } if (index == callArrayLength) { UpdateCIND(CINDType::CALLHELD, CallHeldState::NO_CALLHELD, aSend); } break; default: NS_WARNING("Not handling state changed"); } break; case nsITelephonyProvider::CALL_STATE_DISCONNECTED: switch (prevCallState) { case nsITelephonyProvider::CALL_STATE_INCOMING: case nsITelephonyProvider::CALL_STATE_BUSY: // Incoming call, no break sStopSendingRingFlag = true; case nsITelephonyProvider::CALL_STATE_DIALING: case nsITelephonyProvider::CALL_STATE_ALERTING: // Outgoing call UpdateCIND(CINDType::CALLSETUP, CallSetupState::NO_CALLSETUP, aSend); break; case nsITelephonyProvider::CALL_STATE_CONNECTED: // No call is ongoing if (sCINDItems[CINDType::CALLHELD].value == CallHeldState::NO_CALLHELD) { UpdateCIND(CINDType::CALL, CallState::NO_CALL, aSend); } break; case nsITelephonyProvider::CALL_STATE_HELD: UpdateCIND(CINDType::CALLHELD, CallHeldState::NO_CALLHELD, aSend); break; default: NS_WARNING("Not handling state changed"); } if (aCallIndex == mCurrentCallIndex) { // Find the first non-disconnected call (like connected, held), // and update mCurrentCallIndex while (index < callArrayLength) { if (mCurrentCallArray[index].mState != nsITelephonyProvider::CALL_STATE_DISCONNECTED) { mCurrentCallIndex = index; break; } index++; } // There is no call, close Sco and clear mCurrentCallArray if (index == callArrayLength) { CloseScoSocket(); ResetCallArray(); } } break; default: NS_WARNING("Not handling state changed"); sCINDItems[CINDType::CALL].value = CallState::NO_CALL; sCINDItems[CINDType::CALLSETUP].value = CallSetupState::NO_CALLSETUP; sCINDItems[CINDType::CALLHELD].value = CallHeldState::NO_CALLHELD; } } void BluetoothHfpManager::OnConnectSuccess(BluetoothSocket* aSocket) { MOZ_ASSERT(aSocket); /** * If the created connection is an inbound connection, close another server * socket because currently only one SLC is allowed. After that, we need to * make sure that both server socket would be nulled out. As for outbound * connections, we do nothing since sockets have been already handled in * function Connect(). */ if (aSocket == mHandsfreeSocket) { MOZ_ASSERT(!mSocket); mHandsfreeSocket.swap(mSocket); mHeadsetSocket->Disconnect(); mHeadsetSocket = nullptr; } else if (aSocket == mHeadsetSocket) { MOZ_ASSERT(!mSocket); mHeadsetSocket.swap(mSocket); mHandsfreeSocket->Disconnect(); mHandsfreeSocket = nullptr; } nsCOMPtr provider = do_GetService(NS_RILCONTENTHELPER_CONTRACTID); NS_ENSURE_TRUE_VOID(provider); provider->EnumerateCalls(mListener->GetListener()); // For active connection request, we need to reply the DOMRequest if (mRunnable) { BluetoothValue v = true; nsString errorStr; DispatchBluetoothReply(mRunnable, v, errorStr); mRunnable.forget(); } mFirstCKPD = true; // Cache device path for NotifySettings() since we can't get socket address // when a headset disconnect with us mSocket->GetAddress(mDevicePath); NotifySettings(); } void BluetoothHfpManager::OnConnectError(BluetoothSocket* aSocket) { // For active connection request, we need to reply the DOMRequest if (mRunnable) { BluetoothValue v; nsString errorStr; errorStr.AssignLiteral("Failed to connect with a bluetooth headset!"); DispatchBluetoothReply(mRunnable, v, errorStr); mRunnable.forget(); } mSocket = nullptr; mHandsfreeSocket = nullptr; mHeadsetSocket = nullptr; // If connecting for some reason didn't work, restart listening Listen(); } void BluetoothHfpManager::OnDisconnect(BluetoothSocket* aSocket) { MOZ_ASSERT(aSocket); if (aSocket != mSocket) { // Do nothing when a listening server socket is closed. return; } mSocket = nullptr; CloseScoSocket(); Listen(); NotifySettings(); Reset(); } bool BluetoothHfpManager::IsConnected() { if (mSocket) { return mSocket->GetConnectionStatus() == SocketConnectionStatus::SOCKET_CONNECTED; } return false; }